143mm Smartfinder v3 Set Up Instructions
. Remove batteries and plastic tags from remote and receivers. N Insert battery back into remote control. w
. Now insert battery into first receiver- red button number 1. s
. Press and hold button 1 (red) on remote until red receiver beeps twice then release. wo
. Test configuration by pressing and holding button 1 (red) it should now beep continuously - confirming correct set up. oN
. Repeat step 4, 5 and 6 for the other receivers in order of green, blue then yellow.
**Only insert the batteries into the receivers one at a time during the setup, you have 20 seconds from inserting the battery to press the corresponding button on the remote**
N
. All units should now be correctly set up- if there are any problems during set up - remove all batteries and start from step 1 again. Trouble Shooting
. Receiver not bleeping. Try replacing battery then pressing and holding corresponding button on remote for 10 seconds until receiver bleeps. Receiver constantly bleeps. This is a low battery warning- battery needs replacing. Press the red button and wrong receiver bleeps. Incorrect set up- remove all batteries and set up again following instructions. 4, Sucker doesnt stick. Lightly dampen rubber sucker and it will stick to most surfaces. N w How to Use Smartfinder 1. Set up Smartfinder v3 as instructed. Attach the receivers to items you may want to find- keys, pets, purse, PDA, handbag, TV remotes, mobile phone- anything you like. Press and hold button on remote to find the receiver attached to item you have lost- simple as that. N w Specifications Voltage: 12V (remote) 3V (receiver) Batteries: A23 12V for remote, CR2032 3V for receiver Remote Distance 25-30 meters Sound Volume 85-90 dB Frequency: 433.92 MHz Changes or modification not expressly approved by the Party responsible for compliance could void the users authority to operate the equipment. WUQ |?