FCC ID: A4RG020F Smartphone

Regulatory information The regulatory information, certification, and compliance marks specific to your phone can be found on your device under setting: Settings > About phone > Regulatory labels. Additional regulatory and environmental information can be found at g.co/pixel/reg EMC compliance statement Important: This device, power adapter, and other in-box accessories have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices. Federal Communications Commission (FCC) Regulatory Compliance Note: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the device and receiver. Connect the device into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by Google could void your authority to operate the device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Exposure This device meets the U.S. FCC's requirements for exposure to radio waves and is designed and manufactured not to exceed the FCC's emission limits for exposure to radio frequency (RF) energy. For satisfying FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device, including its antenna, and the user's body. Specific Absorption Rate (SAR) Information This device is designed to meet the requirements for exposure to radio waves established by the FCC. The Specific Absorption Rate (SAR) limit adopted by the FCC is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the FCC for this type of device complies with this limit. Your phone complies with RF specifications when used near your ear or at a distance of 1.0 cm (0.4 in) from your body. Ensure that the devices accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.

ENGLISH ENGLISH ENGLISH FRANAIS FRANAIS FRANAIS ESPAOL ESPAOL ESPAOL

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date:

Subject:

November 29, 2019 Application for Class II Permissive Change for FCC ID A4RG020F Dear Examiner, A Class II Permissive Change is requested for FCC ID: A4RG020F, Model: G020F (approval date:

02/25/2019). Please refer to the attached confidential document A4RG020F Operational Description 2 for details of the changes. The design and implementation and software security remain identical to the original filing. None of the changes affect the maximum power values and frequency ranges listed on the grant. Please do not hesitate to contact me with any questions about this submission. Sincerely, ________________________ John McNulty Head of Safety and Compliance Engineering Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043, USA Phone: +1 650-203-0646 Email: jcmcnulty@google.com

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date:

Subject:

FCC ID:

November 29, 2019 Request for Confidentiality A4RG020F To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 C.F.R. 0.457, 0.459), we request that the Commission withhold the following attachments as confidential documents from public disclosure indefinitely. Operational Descriptions Tune Up Procedure In support of this request, we provide the following information:

1. Identification of the specific information for which confidential treatment is sought

( 0.459(b)(1)): We request that all of the information contained in the above-referenced exhibits to the application for Class II Permissive Change be withheld from routine public disclosure. 2. Identification of the Commission proceeding in which the information was submitted or a description of the circumstances giving rise to the submission (

0.459(b)(2)): The material is being submitted in connection with our application for Class II Permissive Change for the above-captioned FCC ID. 3. Explanation of the degree to which the information is commercial, or financial or contains a trade secret or is privileged ( 0.459(b)(3)): The market for the technology that is the subject of the application is highly competitive, with numerous companies competing for the business of potential customers. Were competitors to become aware of the facts set forth in the above-referenced exhibits to the application at this time, it could have an adverse impact on our competitive standing and deprive us of the marketplace benefit we otherwise might achieve by virtue of having the product available before other competitors. If any of the information for which confidential treatment is sought was made publicly available, competitors could reasonably determine the scope and status of our activities. 4. Explanation of the degree to which the information concerns a service that is competitive ( 0.459(b)(4)): The technology that is the subject of the application is subject to intense competition from other manufacturers and service providers that are developing competing services and technology. 5. Explanation of how disclosure of the information could result in substantial competitive harm ( 0.459(b)(5)): As noted above, were our competitors to become aware of the facts set forth in the above-referenced exhibits to the application, it could have an adverse impact on our competitive standing and deprive us of the marketplace benefit we otherwise would achieve by virtue of having the product available before other providers. 6. Identification of any measures taken by the requesting party to prevent unauthorized disclosure ( 0.459(b)(6)): The information contained in the above-

referenced exhibits to the application has been strictly controlled by us, with distribution limited to internal use only and for the specific purpose of conducting research, development, and testing of the technology. 7. Identification of whether the information is available to the public and the extent of any previous disclosures of the information to any third parties ( 0.459(b)(7)): The information that we request be maintained as confidential is not available publicly. The information has been protected and kept confidential by limiting external contacts to privileged and confidential communications. 8. Justification of the period during which the submitting party asserts that material should not be available for public disclosure ( 0.459(b)(8)): Given the competitive nature of the marketplace, any disclosure that we have developed the technology discussed in the above-referenced exhibits to the application would harm our competitive position. The information subject to this request for confidentiality should not be made available for public disclosure at any time. Sincerely, _________________________ John McNulty Head of Safety and Compliance Engineering Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043, USA Phone: +1 650-203-0646 Email: jcmcnulty@google.com

November 29, 2019 FCC Agent Authorization Letter A4RG020F Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date:

Subject:

FCC ID:

To Whom It May Concern:

I, the undersigned, hereby authorize Sporton International Inc. (Sporton) to act on Google LLCs

(Google) behalf in all manners relating to the above-captioned application for equipment authorization, including signing of all documents relating to this matter. Any and all acts carried out by Sporton on Googles behalf shall have the same effect as acts of Googles own. I, the undersigned, hereby certify that Google is not subject to a denial of federal benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing Sporton as Googles representative, Google recognizes that it is still responsible for:

a) complying with the relevant provisions of the certification program;

b) c) d) e) f) g) h) making all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

making claims regarding certification only in respect of the scope for which certification has been granted;

not using the product certification in such a manner as to bring Sporton into disrepute and not making any statement regarding the product certification that Sporton may consider misleading or unauthorized;

upon suspension or cancellation of certification, discontinuing the use of all advertising matter that contains any reference thereto and return any certification documents as required by Sporton;

using the certification only to indicate that the products are certified as being in conformity with specified standards;

endeavoring to ensure that no certificate or report or any part thereof is used in a misleading manner;

ensuring that any reference to the product certification in communication media such as documents, brochures, or advertising, complies with Sportons requirements;

i) j) keeping a record of all complaints made known to Google relating to the products compliance with the requirements of the relevant standard and making these records available to the applicable authorities when requested;

taking appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

and k) documenting the actions taken. This authorization is valid until further written notice from Google. Sincerely, _________________________ John McNulty Head of Safety and Compliance Engineering Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043, USA Phone: +1 650-203-0646 Email: jcmcnulty@google.com