n o i t a r t s i g e R y t n a r r a W t c u d o r P i
t i s v e s a e p l
, t c u d o r p d e s a h c r u p r u o y r e t s g e r o T i EcoEdge+
Models: GDI-EXEGPL400 GDI-EXEGPL410 User Guide r e t s i g e r
m o c
. r a e g x o c e w w w
. Quick Start 1 2 3 4 5 Open Cap on the side of your EcoEdge+
Turn on the Main Power Switch Press the Standby Button to power on your EcoEdge+
Search your Bluetooth Connection on your Smart Device Pair & Play POWER + CONNECT only for the original owner who purchases the unit from an authorized dealer. Transfers do not qualify for warranty protection. Grace Digital reserves the right to replace any out-of-stock or discontinued product with a comparable product. Discontinued products may not be available for warranty replacement. Any contents are NOT covered by the limited manufacturers warranty. Warranty terms may be revised without notification at the discretion of the manufacturer. Please visit www.ecoxgear.com for additional product &
warranty information. NOTE: Product registration does not constitute proof of purchase for the warranty process. Please keep all receipt and purchase records as your evidence of the date and place of purchase. EcoEdge+ by ECOXGEAR, a division of Grace Digital Inc., San Diego, California. Designed and Engineered in the USA. Made in China. Patent Pending. LED Status Indicators Power, Battery Indicator, Bluetooth, EcoConnect Control Buttons for cleaning. premature wear. radiation (UV sunlight) and strong dirt, hair, or sand are on the rubber seal ring. 6) AVOID prolonged exposure to ultraviolet magnetic fields. 7) Periodically check the rubber seal for 8) Periodically clean the rubber with a soft moist cloth and ensure no objects such as Do NOT use any oily solvent or chemicals 9) Rinse off the unit with tap water after use in 10) Power and / or charge the built-in USB connection or to an AC outlet using the AC-to-USB cord 5V, 1A power adapter 11) Noise and audio distortion may occur when 12) Do NOT remove the built-in battery. Do NOT remove the grill covers. rechargeable battery for portable use by connecting the USB cord to a computer the batteries are nearing end of charge. intended for use with the unit. salt water or swimming pool. LIMITED MANUFACTURERS WARRANTY:
The EcoEdge+ is covered by a 3 year limited warranty that covers defects in workmanship and / or materials for a period of 3 years from original purchase date. This warranty does not apply to any products which have been abused, neglected, modified, or used for a purpose other than the one for which they were manufactured. Please refer to the above care and maintenance instructions for suggested care details. The warranty is valid Battery Level Indicators Control Buttons
& Operations On/Off Press the Standby Power Button once to power On/Off. IMPORTANT: Standby Power function will NOT operate when the Master Power is set OFF. Master Power Switch under the cap on the side panel must be set ON for Standby & your EcoEdge+ to operate. Bluetooth Once turned on, the EcoEdge+ will search for your Bluetooth. Refer to Set Up Recommendations 1-2-3 part for details. 3 dropped it or thrown it against a hard surface which may have destroyed the integrity of the speakers, housings, or gaskets. In the event of a severe impact to your unit please return the unit to Grace 2) Never use your ECOXGEAR if you have Digital to review for potential damage. 3) Never open the auxiliary door in a water environment. This could cause water to ingress into the unit which could potentially be hazardous and cause a fire or a spark. 4) Never connect a device to the auxiliary input 5) Never attempt to fix, repair your ECOXGEAR unit. Please send it back to Grace Digital for any assessments and repairs. jack when in a water environment. The auxiliary jack should only be used in a dry environment. properly closed. is placed in water without the cap properly closed, water may enter into the unit and void your warranty. CARE, MAINTENANCE,
& PRECAUTIONS:
1) The unit is waterproof only when the cap is 2) Close the cap properly before use. If the unit 3) Dry unit completely before opening the cap. Do NOT open the cap if wet or in a wet environment. 4) Do NOT apply excessive force to any surfaces of the unit when wet or in a wet environment. 5) Do NOT use or store the unit in places with high temperature. intend to mount the unit. accordance with any music or noise rules and regulations. each use when in humid or water environments to avoid water damage to the internal components. Salt water / air is particularly corrosive. Always make sure that the gaskets are sealed when in salt water environment and the unit properly rinsed off after use. You should always 1) Use the ECOXGEAR speaker in 2) Use the proper ECOXGEAR mounts if you 3) Properly seal the ECOXGEAR prior and after 4) Properly clean the ECOXGEAR and ensure the gaskets have no sand, dirt, or water on them prior to storage or removing the back cover. 5) Store your unit with all caps properly sealed 6) Completely dry and clean your ECOXGEAR 7) Return the ECOXGEAR to Grace Digital if You should never 1) NEVER charge your ECOXGEAR if you suspect water has entered the device. Charging a device with water inside could you suspect water ingress into the unit or if the unit has experienced a severe impact that may have affected the integrity of the unit to take on water. be potentially hazardous and cause fire or a spark. to avoid long term internal moisture damage inside your unit. prior to attempting to charge the unit. to EcoConnect Functionality is only available between two units. Refer to EcoConnect - Wireless Stereo Connection of Two Speakers for details. Speaker Volume Press to decrease or increase Speaker Volume. NOTE: Some Bluetooth devices may require to be manually set for maximum audio level. Your EcoEdge+ will beep to indicate when maximum volume setting is reached. Track Selection Press button once to select Previous Song track Song track
& Next
. Play/Pause/
Answer/EcoTalk Press button once to pause &
play song tracks and to answer mobile calls (MUST be paired with Bluetooth). Press & hold the button for two seconds to activate the voice assistant on your device
(Siri, OK Google, etc.). Once activated, the speakerphone mic on your EcoEdge+ will hear your voice commands and transfer them to the voice assistant on your device. NOTE: Before using the EcoTalk function, your device must be connected to the EcoEdge+ via Bluetooth. Not all devices have voice assistant functionality;
refer to your device for details. Contact Grace Digital at www.gracesupport.com or a certified recycling agent to dispose of the unit. ATTENTION: Do NOT dispose of in a landfill. ATTENTION: AC adapter is a device forming a part of the main plug;
therefore, an AC adapter can always be readily disconnected from AC socket-outlet. SAFETY:
This product has a limited life span of use and should be replaced when it shows obvious signs of wear. Do not modify or remove any original component parts of the speaker. Doing so could cause damage to the unit allowing water to ingress. A unit with water ingress should not be charged due to potential risk of fire or shock. Do not attempt to mount the unit except with the approved ECOXGEAR mounts. Doing so could cause damage to the unit allowing water to ingress. A unit with water ingress should not be charged due to potential risk of fire or shock. Please exercise care and good judgment when using your ECOXGEAR speaker. Audio levels should be appropriate to your environment, comply with all local regulations, and always ensure that you can hear and be aware of any potential hazards around you. water, clean it thoroughly after use with fresh water. The USB cables and unit with an improperly fitted cap are NOT waterproof. To prevent fire or shock, do NOT attempt to charge this unit if it is wet or you suspect water has entered the unit. In this situation, please return the unit to Grace Digital for a free assessment. If we have found that the unit has carried water, we will repair or replace the unit free of charge. Do NOT open to repair. A qualified technician must carry out repair work. wet. Towel dry the unit AND make sure all connections are dry BEFORE plugging in the charging connector. Failure to do so may result in electrical damage to the unit and may void the warranty. SAFETY ADVISORY & WARNING:
Read and follow all instructions. Use only as intended. CAUTION:
ATTENTION: Do NOT charge while the unit is PROPOSITION 65 WARNING: Cancer and Reproductive Harm WARNING:
WARNING:
- www.P65Warnings.ca.gov EcoEdge+ has a built-in Lithium battery. The battery must NOT be used in or near an open heat source or excessive heat. Danger of explosion if battery is incorrectly replaced. Light Modes Press button to cycle through five modes:
Mode 1: Off Mode 2: Red Light Mode 3: Green Light Mode 4: Music Sync Mode 5: Color Fade Battery Indicator Connect USB to power source. LED on the top panel indicates USB connection charging status. RED: charge in process GREEN: full charge complete NOTE: There also are four LED Battery Level Indicators located on the top of the unit. Each LED represents 25% of a charge. Four full LEDs indicate a full charge. Set Up Recommendations 1-2-3 1 Charge Your EcoEdge+
Before you power on your EcoEdge+, connect the USB Micro port to the USB cable and a 5V power source to fully charge your EcoEdge+
for best performance. NOTE: Before using your EcoEdge+ for the first time, charge the unit until all battery level indicators are green, indicating a full charge. Approximately 3 hours of charging is required from a low to a full charge. Power source options include the USB connection to your computer or a power outlet using a 5V USB to AC power adapter. It is recommended to always use the USB cable included with your EcoEdge+. receiver is connected, consult the dealer or an experienced radio/TV technician for help. RF WARNING STATEMENT:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. IC STATEMENT:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device. PRODUCT USE AND PROTECTION:
Read and follow all instructions. Use only as intended. The ECOXGEAR Bluetooth speaker is intended to be used indoors or outdoors and in land or water environments. The speaker has been tested to IP67 waterproofing standards, which means the speaker can be submerged in up to 3 feet of water for 30 minutes without any damage. However, the speaker is NOT intended for constant underwater use. Always make sure the cap(s) / covers(s) are clean, free from sand or debris, and correctly fitted. The speaker will only meet IP67 ratings if all rubber seals, gasket(s), and cover(s) / cap(s) are in place. If you notice a muffling of audio after submersion, gently shake the unit to clear excess water. If your speaker is exposed to salt interference, and FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful 2) This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment into an outlet on a circuit different from that to which the 2 Power On, Battery, &
LED Status Indicators Once fully charged, press the Standby Power Button on the top of your EcoEdge+. You will see the green LED light & you will hear, Power on when powering on. IMPORTANT: Make sure that the Main Power Switch, located in the back compartment under the cap, is set in the ON position. If the switch is in the OFF position, your EcoEdge+ will not be able to turn on using the Standby Power Button. The LED battery level indicators are located on the top of the unit. Each bar represents 25% of a charge, with 4 full LEDs indicating a full charge. Audio playback time over Bluetooth connection is approximately 20 hours. Optional Accessories For Charging AC (5V, 1A) USB Wall Outlet Power Adapter For Mounting Suction Cup Mount ( mount) Handlebar Mount Adapter
( mount) 3 Bluetooth Pairing
& Your Audio Connecting With Bluetooth: Connect To Your Smart Device & Play Audio When your EcoEdge+ is turned on, the blue LED light on the top panel will flash, indicating the unit is ready to pair. Turn on Bluetooth on your Bluetooth device (Smart Device) and set the device in pairing mode. Available Bluetooth connections shall appear. Select the ECOXGEAR speaker from the list of discovered devices on your Bluetooth device. Wait for a few seconds until the connection is completed. NOTE: Bluetooth connection feature is found in the Settings section of most mobile phones and other Bluetooth enabled devices. Whats in the Box EcoEdge+
Models: GDI-EXEGPL400...420 User Guide EcoEdge+ Unit User Guide Carabiner USB Cable When the ECOXGEAR selection is made and the Bluetooth connection is completed, your EcoEdge+ will announce:
Connection successful Once connected, select and play your desired audio. Pairing Mode: If the LED is not flashing or if you wish to place your EcoEdge+ in pairing mode, press and release the Bluetooth button on the top panel. Your EcoEdge+ shall announce Ready to connect when ready to pair to a new device. NOTE: Your EcoEdge+ shall sync & wirelessly pair with most Bluetooth enabled devices. The unit remembers the last device paired and will automatically search for previous connections when the speaker is turned on or when a device comes back into Bluetooth range. If a connection is lost due to range, the speaker Mount Attachment Point diameter EcoConnect TrueWireless Stereo (TWS) Up to 30 ft / 9.1 m between paired speakers Charging Options USB cable to USB outlet, to 5V AC adapter, or to Computer Charging Time Approximately 3 hours Recommended Storage
(Battery) Temperature 59F / 15C Operating Temperature 23F to 104F / -5C to 40C Waterproof/Dustproof Rating IP67 will look to re-establish that connection. If Bluetooth is turned off on your Smart Device, the EcoEdge+ may not automatically look for the device. RECOMMENDATION: If you are not familiar with Bluetooth pairing for your Smartphone or other Smart Device, refer to the User Guide for your Smartphone to learn how to add and pair a new device (EcoEdge+ for instance) to your Smartphone using Bluetooth. Bluetooth Pairing & Connections:
Once paired, should you have an issue switching between Bluetooth connections between devices, open the Bluetooth Section within the device currently connected to the EcoEdge+ and delete the Bluetooth connection. The EcoEdge+ will then be available to pair & connect to an alternate Bluetooth enabled Smartphone / Audio Device. Unit Weight 17 ounces Output Power 20W Max Amp, x1 woofer (3) S/N Ratio 88dB +/- 3dB Power Source 3.6V, 3350mAh Lithium Ion Battery USB Input 5V, 1A Frequency Range 125Hz-18,000Hz Bluetooth Bluetooth CSR 4.2 Up to 100 ft / 30 m Play Time 20+ hours from full charge EcoConnect - Wireless Stereo Connection of Two Speakers When you have two EcoEdge+
speakers and want to wirelessly pair them for surround sound, first follow the Bluetooth Pairing & Audio instructions to connect one EcoEdge+ speaker to your device. Leave this EcoEdge+ speaker powered on and connected to your device. Next, turn on your second EcoEdge+ speaker. Once the second speaker is powered on (the Bluetooth light will be flashing), press the EcoConnect Button on both of your EcoEdge+ speakers. Both speakers will announce, EcoConnect, pairing speakers. Wait approximately 4 seconds for the speakers to wirelessly connect. Both speakers will announce Connection successful. Speakers paired. and the EcoConnect light will turn solid BLUE on both units once the connection is completed. Once the two EcoEdge+
speakers are connected via EcoConnect, start playing music from your device. Both connected EcoEdge+ units will play the music from you device. While the two speakers are connected and playing music from your device, PRESS AND HOLD to cycle through the EcoConnect modes. There are four modes: STEREO; RIGHT /
LEFT; LEFT / RIGHT; MONO. Specifications Unit Dimensions 5.5 5.5 2.3 POWER + CONNECT Mount Attachment Point Bottle Opener The EcoConnect connection between the two EcoEdge+
speakers will NOT automatically re-connect after the speakers are turned off. To re-establish EcoConnect between the speakers, after powering off, please follow the above steps. NOTE: The EcoConnect feature works when paired to another EcoConnect capable speaker with a distance of up to 30ft from each other. EcoConnect only works when using Bluetooth as your audio source. POWER + CONNECT Important: Maintaining Waterproofness Your EcoEdge+ is only waterproof when the cap is properly closed. In order to properly close the cap, push firmly to be sure the cap fits flat and flush along the edges with the panel. If not properly closed the unit is NOT watertight and may not float. Master Power Switch
& Connections Master Power Switch EcoEdge+ has a separate Master Power Switch and a Standby Button. The switch MUST be set to the ON position to power your EcoEdge+. Once the switch is set to ON, use the Standby Button located on the top panel to turn the unit On/Off. NOTE: When not in use for extended periods, turn the Master Power off to preserve battery life. IMPORTANT: Standby Power function will NOT operate when the Master Power is set to OFF. INPUT OFF ON AUDIO AUX-IN Audio AUX-IN Connect an audio device using the 3.5mm cable connection as an alternative to a Bluetooth connection to your EcoEdge+. NOTE: Volume level must be controlled from the audio device when connected to the AUX-IN connection. Input Connect the USB cable to the USB micro Input to charge your EcoEdge+. RECOMMENDATION: Use the USB cable included in the box. NOTE: Charge time from low to full charge is approximately 3 hours. While playing audio, EcoEdge+
can be charged. CAUTION: Do NOT charge if unit and/or connections are wet or damp.