FCC ID: 2AAUI-GDIEXEDGPRO ECOEDGE PRO

EcoEdge Pro Models: GDI-EXEDGPRO401, GDI-EXEDGPRO402, GDI-EXEDGPRO403 User Guide n o i t a r t s i g e R y t n a r r a W t c u d o r P i

t i s v e s a e p l

, t c u d o r p d e s a h c r u p r u o y r e t s g e r o T i r e t s i g e r

m o c

. r a e g x o c e w w w

. Quick Start POWER + CONNECT 1 2 3 4 5 Open Cap on the side of your EcoEdge Pro Turn on the Main Power Switch On the Top Panel, Press the Standby to Power Button power on your EcoEdge Pro Search your Bluetooth Connection on your Smart Device Pair & Play the original owner who purchases the unit from an authorized dealer. Transfers do not qualify for warranty protection. Grace Digital reserves the right to replace any out-of-stock or discontinued product with a comparable product. Discontinued products may not be available for warranty replacement. Any contents are NOT covered by the limited manufacturers warranty. Warranty terms may be revised without notification at the discretion of the manufacturer. Please visit www.ecoxgear.com for additional product &

warranty information. NOTE: Product registration does not constitute proof of purchase for the warranty process. Please keep all receipt and purchase records as your evidence of the date and place of purchase. EcoEdge Pro by ECOXGEAR, a division of Grace Digital Inc., San Diego, California. Designed and Engineered in the USA. Made in China. Patent Pending. Hey Google is a trademark of Google LLC. Siri and Apple are trademarks of Apple Inc. Bluetooth is a trademark of Bluetooth SIG, Inc. for cleaning. premature wear. radiation (UV sunlight) and strong dirt, hair, or sand are on the rubber seal ring. 6) AVOID prolonged exposure to ultraviolet magnetic fields. 7) Periodically check the rubber seal for 8) Periodically clean the rubber with a soft moist cloth and ensure no objects such as Do NOT use any oily solvent or chemicals 9) Rinse off the unit with tap water after use in 10) Power and / or charge the built-in rechargeable battery for portable use by connecting the USB cord to a computer USB connection or to an AC outlet using the AC-to-USB cord 5V, 1A power adapter 11) Noise and audio distortion may occur when the batteries are nearing end of charge. 12) Do NOT remove the built-in battery. Do NOT remove the grill covers. intended for use with the unit. salt water or swimming pool. LIMITED MANUFACTURERS WARRANTY:

The EcoEdge Pro is covered by a 1-year limited warranty that covers defects in workmanship and / or materials for a period of 1 year from original purchase date. This warranty does not apply to any products which have been abused, neglected, modified, or used for a purpose other than the one for which they were manufactured. Please refer to the above care and maintenance instructions for suggested care details. The warranty is valid only for LED Status Indicators Power, Charging, Bluetooth, and Mode Status LEDs Battery Level Indicators Control Buttons Control Buttons

& Operations On/Off Press the Standby Power Button once to power On/Off. IMPORTANT: Standby Power Button function will NOT operate when the Master Power Switch is set to the OFF position. Master Power Switch under the cap on the Side Panel must be set ON for Standby & your EcoEdge Pro to operate. Bluetooth Once turned on, the EcoEdge Pro will search for your Bluetooth. Refer to Set Up Recommendations 1-2-3 for details. part 3 2) Never use your ECOXGEAR if you have dropped it or thrown it against a hard surface which may have destroyed the integrity of the speakers, housings, or gaskets. In the event of a severe impact to your unit please return the unit to Grace Digital to review for potential damage. 3) Never open the auxiliary door in a water environment. This could cause water to ingress into the unit which could potentially be hazardous and cause a fire or a spark. 4) Never connect a device to the auxiliary input jack when in a water environment. The auxiliary jack should only be used in a dry environment. 5) Never attempt to fix, repair your ECOXGEAR unit. Please send it back to Grace Digital for any assessments and repairs. properly closed. CARE, MAINTENANCE,

& PRECAUTIONS:

1) The unit is waterproof only when the cap is 2) Close the cap properly before use. If the unit is placed in water without the cap properly closed, water may enter into the unit and void your warranty. 3) Dry unit completely before opening the cap. Do NOT open the cap if wet or in a wet environment. 4) Do NOT apply excessive force to any surfaces of the unit when wet or in a wet environment. 5) Do NOT use or store the unit in places with high temperature. intend to mount the unit. accordance with any music or noise rules and regulations. each use when in humid or water environments to avoid water damage to the internal components. Salt water / air is particularly corrosive. Always make sure that the gaskets are sealed when in salt water environment and the unit properly rinsed off after use. You should always 1) Use the ECOXGEAR speaker in 2) Use the proper ECOXGEAR mounts if you 3) Properly seal the ECOXGEAR prior and after 4) Properly clean the ECOXGEAR and ensure the gaskets have no sand, dirt, or water on them prior to storage or removing the back cover. 5) Store your unit with all caps properly sealed 6) Completely dry and clean your ECOXGEAR prior to attempting to charge the unit. 7) Return the ECOXGEAR to Grace Digital if You should never 1) NEVER charge your ECOXGEAR if you suspect water has entered the device. Charging a device with water inside could be potentially hazardous and cause fire or a spark. you suspect water ingress into the unit or if the unit has experienced a severe impact that may have affected the integrity of the unit to take on water. to avoid long term internal moisture damage inside your unit. EcoCast If you have purchased additional EcoEdge Pro speakers (or other ECOXGEAR speakers bearing the EcoCast symbol), use this button to cycle through Speaker Mode, EcoCast Transmitting Mode, and Receiving Mode. Refer to EcoCast Broadcast Your Music to Multiple Speakers for details. Speaker Volume Press increase Speaker Volume. NOTE: Some Bluetooth devices may require to be manually set for maximum audio level. Your EcoEdge Pro will beep to indicate when maximum or minimum volume setting is reached. to decrease or to

& Next Track Selection Press button once to select Previous Song track Song track Play/Pause/

Answer/EcoTalk Press button once to pause or play song tracks. When receiving an incoming phone call, press button once to answer. Press button again to hang up. You can also PRESS AND HOLD to reject an incoming call. PRESS AND HOLD the button for two seconds to activate the voice assistant on your device

(Siri, Hey Google, etc.). Once activated, the Speakerphone Mic on your EcoEdge Pro will hear your voice commands and transfer them to the voice assistant on your device. Danger of explosion if battery is incorrectly replaced. WARNING:

ATTENTION: Do NOT dispose of in a landfill. Contact Grace Digital at www.gracesupport.com or a certified recycling agent to dispose of the unit. ATTENTION: AC adapter is a device forming a part of the main plug;

therefore, an AC adapter can always be readily disconnected from AC socket-outlet. SAFETY:

This product has a limited life span of use and should be replaced when it shows obvious signs of wear. Do not modify or remove any original component parts of the speaker. Doing so could cause damage to the unit allowing water to ingress. A unit with water ingress should not be charged due to potential risk of fire or shock. Do not attempt to mount the unit except with the approved ECOXGEAR mounts. Doing so could cause damage to the unit allowing water to ingress. A unit with water ingress should not be charged due to potential risk of fire or shock. Please exercise care and good judgment when using your ECOXGEAR speaker. Audio levels should be appropriate to your environment, comply with all local regulations, and always ensure that you can hear and be aware of any potential hazards around you. water, clean it thoroughly after use with fresh water. The USB cables and unit with an improperly fitted cap are NOT waterproof. To prevent fire or shock, do NOT attempt to charge this unit if it is wet or you suspect water has entered the unit. In this situation, please return the unit to Grace Digital for a free assessment. If we have found that the unit has carried water, we will repair or replace the unit free of charge. SAFETY ADVISORY & WARNING:

Read and follow all instructions. Use only as intended. Do NOT open to repair. A CAUTION:

qualified technician must carry out repair work. ATTENTION: Do NOT charge while the unit is PROPOSITION 65 WARNING: Cancer and Reproductive Harm WARNING:

wet. Towel dry the unit AND make sure all connections are dry BEFORE plugging in the charging connector. Failure to do so may result in electrical damage to the unit and may void the warranty.

- www.P65Warnings.ca.gov EcoEdge Pro has a built-in Lithium battery. The battery must NOT be used in or near an open heat source or excessive heat. NOTE: Before using the Answer or EcoTalk functions, your device must be connected to the EcoEdge Pro via Bluetooth. Not all devices have voice assistant functionality; refer to your device for details. Party Light Modes Press button to turn on the LED Party Lights. Press button again to cycle through 20 Party Light Modes. Double-click button to go back to the previous Party Light Mode. PRESS AND HOLD to turn off the LED Party Lights. 20 Party Light Modes:

1: Rotating lights with color changing LEDs 2: Color fading and jumping with periodic rotating LEDs 3: Music Sync 1 360 flashing to beat with color changing LEDs 4: Music Sync 2 - Vertical flashing to beat with color changing LEDs 5: Music Sync 3 - Rotating flashing to beat with color changing LEDs 6: Music Sync 4 - Horizontal flashing to beat with color changing LEDs 7: Music Sync 5 - Dancing to beat with color changing LEDs 8: Music Sync 6 - Rotating to beat with color changing LEDs 9: Music Sync 7 - Randomly rotating to beat with color changing LEDs 10: Solid Red receiver is connected, consult the dealer or an experienced radio/TV technician for help. RF WARNING STATEMENT:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. IC STATEMENT:

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device. PRODUCT USE AND PROTECTION:

Read and follow all instructions. Use only as intended. The ECOXGEAR Bluetooth speaker is intended to be used indoors or outdoors and in land or water environments. The speaker has been tested to IP67 waterproofing standards, which means the speaker can be submerged in up to 3 feet of water for 30 minutes without any damage. However, the speaker is NOT intended for constant underwater use. Always make sure the cap(s) / covers(s) are clean, free from sand or debris, and correctly fitted. The speaker will only meet IP67 ratings if all rubber seals, gasket(s), and cover(s) / cap(s) are in place. If you notice a muffling of audio after submersion, gently shake the unit to clear excess water. If your speaker is exposed to salt interference, and FCC STATEMENT:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful 2) This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment into an outlet on a circuit different from that to which the 11: Solid Orange 12: Solid Yellow 13: Solid Green 14: Solid Cyan 15: Solid Blue 16: Solid Purple 17: Solid White 18: FADE7 (Red, Orange, Yellow, Green, Cyan, Blue, Purple) 19: JUMP7 (Red, Orange, Yellow, Green, Cyan, Blue, Purple) 20: Color Fade (Red, Orange, Yellow, Green, Cyan, Blue, Purple) 21: Off LED Status Indicators There are 8 LEDs on the Top Panel of the EcoEdge Pro. The first 4 are Status Indicators. indicates USB connection When turned on, the SOLID GREEN LED above the Power Button indicates Power Status. Connect USB-C Input, under the Power + Connect Cap, to a power source. The LED next to Charging Status. RED: Charge in process GREEN: Full charge complete When you turn on the EcoEdge Pro, the BLUE LED above the Bluetooth Button indicates Bluetooth Status. FLASHING: Ready to pair SOLID: Bluetooth connection successful Refer to Set Up Recommendations 1-2-3 for additional details. indicates The LED next to the following Mode Statuses:

Speaker Mode, EcoCast Whats in the Box EcoEdge Pro Models: GDI-EXEDGPRO400...420 User Guide EcoEdge Pro Unit User Guide Carabiner USB Cable Optional Accessories For Charging AC (5V, 1A) USB Wall Outlet Power Adapter For Mounting Suction Cup Mount ( mount) Handlebar Mount Adapter

( mount) Mount Attachment Point diameter EcoCast Using Qualcomm Broadcast Audio technology EcoCast Range 30 ft / 9.1 m between Casting speaker and Receiving speakers Charging Options USB-C cable to USB outlet, to 5V AC adapter, or to Computer Charging Time Approximately 5-6 hours Recommended Storage

(Battery) Temperature 59F / 15C Operating Temperature 23F to 104F / -5C to 40C Waterproof/Dustproof Rating IP67 Transmitting Mode, and EcoCast Receiving Mode. BLUE: Speaker Mode RED: EcoCast Transmitting GREEN: EcoCast Receiving Refer to EcoCast Broadcast Your Music to Multiple Speakers for details. Battery Level Indicators There also are four LED Battery Level Indicators located on the top of the unit. Each LED represents 25% of a charge. Four full LEDs indicate a full charge. Refer to Set Up Recommendations 1-2-3 for additional details. Speakerphone Mic The integrated Speakerphone Mic on the Front Panel allows you to answer mobile calls and use the EcoTalk feature. Unit Weight 19.4 ounces S/N Ratio 88dB +/- 3dB Power Source 3.6V, 3350mAh Lithium Ion Battery USB Input 5V, 1A Frequency Range 125Hz-18,000Hz Bluetooth Bluetooth 5.0 Up to 100 ft / 30 m Play Time 20+ hours from full charge Set Up Recommendations 1-2-3 1 Charge Your EcoEdge Pro Prior to First Use For best performance, fully charge your EcoEdge Pro before you turn it on for the first time. Connect the USB-C port to the USB cable and a 5V power source. Charge the unit until the LED Charging Status Indicator and all four Battery Level Indicators are SOLID GREEN, indicating a full charge. NOTE: The LED Charging Status Indicator will only turn on while the EcoEdge Pro is connected to a 5V power source. It will shine red while charging and switch to green when the unit has reached a full charge. Specifications Unit Dimensions 5.40 2.27 5.43 Bottle Opener Mount Attachment Point Approximately 5-6 hours of charging is required from a low to a full charge. Power source options include the USB connection to your computer or a power outlet using a 5V USB to AC power adapter. It is recommended to always use the USB cable included with your EcoEdge Pro. Power On, Battery, &

2 LED Status Indicators Once fully charged, press the Standby Power Button on the top of your EcoEdge Pro. You will hear, Speaker Mode,

(or EcoCast Transmitting, or EcoCast Receiving,) ready to connect, when powering on. RECOMMENDATION: If you only have one EcoEdge Pro, put it into Speaker Mode. If you hear EcoCast Transmitting or EcoCast Receiving, or if the Mode Status Indicator shines RED or GREEN, when the speaker is turned on, press the EcoCast Button to cycle through each Mode until you hear the voice prompt, Speaker Mode and the Mode Status Indicator turns BLUE. IMPORTANT: Make sure that the Main Power Switch, located on the Side Panel, is set to the ON position. If the switch is in the OFF position, your EcoEdge Pro will not be able to turn on using the Standby Power Button. The LED battery level indicators are located on the top of the unit. Each LED represents 25%

of a charge, with 4 full LEDs indicating a full charge. Audio playback time is approximately 20 hours. POWER + CONNECT Important: Maintaining Waterproofness Your EcoEdge Pro is only waterproof when the cap is properly closed. In order to properly close the cap, push firmly to be sure the cap fits flat and flush along the edges with the panel. If not properly closed the unit is NOT watertight and may not float. Audio AUX-IN Connect an audio device using the 3.5mm cable connection as an alternative to a Bluetooth connection to your EcoEdge Pro. NOTE: Volume level must be controlled from the audio device when connected to the AUX-IN connection. USB-C Input Connect the USB cable to the USB-C Input to charge your EcoEdge Pro. RECOMMENDATION: Use the USB cable included in the box. NOTE: Charge time from low to full charge is approximately 5-6 hours. While playing audio, EcoEdge Pro can be charged. CAUTION: Do NOT charge if unit and/or connections are wet or damp. 3 Bluetooth Pairing

& Your Audio Connecting With Bluetooth: Connect To Your Smart Device & Play Audio When your EcoEdge Pro is turned on, the LED Bluetooth Status Indicator on the Top Panel will FLASH BLUE, indicating the unit is ready to pair. Turn on Bluetooth on your Bluetooth device (Smart Device) and set the device in pairing mode. Available Bluetooth connections shall appear. Select the ECOXGEAR speaker from the list of discovered devices on your Bluetooth device. Wait for a few seconds until the connection is completed. NOTE: Bluetooth connection feature is found in the Master Power Switch

& Connections Master Power Switch EcoEdge Pro has a separate Master Power Switch and a Standby Power Button

. The switch MUST be set to the ON position to power your EcoEdge Pro. Once the switch is set to ON, use the Standby Power Button, located on the Top Panel, to turn the unit On/Off. NOTE: When not in use for extended periods, turn the Master Power off to preserve battery life. IMPORTANT: Standby Power Button function will NOT operate when the Master Power Switch is set to OFF. Settings section of most mobile phones and other Bluetooth enabled devices. When the ECOXGEAR selection is made and the Bluetooth connection is completed, your EcoEdge Pro will announce:

Your phone is connected. The Bluetooth Status Indicator will shine SOLID BLUE. Once connected, select and play your desired audio. Pairing Mode: If the Bluetooth Status Indicator is not flashing or if you wish to place your EcoEdge Pro in pairing mode, press and release the Bluetooth Button on the Top Panel. Your EcoEdge Pro shall announce, Ready to connect, when ready to pair to a new device. PRESS AND HOLD the Bluetooth Button for 5 seconds to clear the pairing records. While connecting the EcoEdge Pro speakers, make sure that the speakers are within a few feet of each other. NOTE: Your EcoEdge Pro shall sync & wirelessly pair with most Bluetooth enabled devices. The unit remembers the last device paired and will automatically search for previous connections when the speaker is turned on or when a device comes back into Bluetooth range. If a connection is lost due to range, the speaker will look to re-establish that connection. If Bluetooth is turned off on your Smart Device, the EcoEdge Pro may not automatically look for the device. RECOMMENDATION:

If you are not familiar with Bluetooth pairing for your Smartphone or other Smart Device, refer to the User Guide for your Smartphone to learn how to add and pair a new device (EcoEdge Pro for instance) to your Smartphone using Bluetooth. Bluetooth Pairing &

Connections: Once paired, should you have an issue switching between Bluetooth connections between devices, open the Bluetooth Section within the device currently connected to the EcoEdge Pro and delete the Bluetooth connection. The EcoEdge Pro will then be available to pair

& connect to an alternate Bluetooth enabled Smartphone

/ Audio Device. NOTES:

If all the speakers are turned off, then turned on, the speaker(s) in EcoCast Receiving Mode

(Speakers B, C, and D) will automatically re-connect to the speaker in Transmitting Mode (Speaker A). If they are not automatically re-

connected, please follow the above steps. You can also pair the EcoEdge Pro with any other ECOXGEAR speaker bearing the EcoCast symbol The EcoCast functionality

. is only available while using Bluetooth as your Audio Source at a maximum range of 30 feet between speakers. to cycle 1 Power on the additional EcoEdge Pro speaker(s)

(Speaker C and Speaker D). Press through to EcoCast Receiving Mode. The Mode Status Indicator will FLASH GREEN, and the speaker(s) will announce, EcoCast receiving. 2 On Speaker A (the speaker with the Mode Status Indicator shining SOLID RED), PRESS AND HOLD The Mode Status Indicator will FLASH RED. for 3 seconds. 3 Once the connection between the speakers is successful, Speaker C (and Speaker D) will announce, Connection Successful, and start playing music. EcoCast Broadcast Your Music to Multiple Speakers x100 When you have two or more EcoEdge Pro speakers bearing

, the EcoCast symbol you can build a broadcast system by initiating EcoCast Transmitting Mode in one EcoEdge Pro speaker and broadcasting your music to one or more EcoEdge Pro speakers in EcoCast Receiving Mode. EcoCast: First 2 Speakers A B 1 Follow the Bluetooth Pairing & Your Audio instructions to connect one EcoEdge Pro (Speaker A) to your Bluetooth device. After your device is connected to Speaker A, you can select a song to play. 2 Press on Speaker A to initiate EcoCast Transmitting Mode. The Mode Status Indicator

(the fourth LED Indicator from the left) will FLASH RED, and the speaker will announce, EcoCast transmitting. 3 Power on Speaker B speaker and press to cycle through to EcoCast Receiving Mode. The Mode Status Indicator will FLASH GREEN, and the speaker will announce, EcoCast receiving. 4 Once the connection between the speakers is successful, Speaker B will announce, Connection Successful, and start playing music. EcoCast: Additional Receiving Speakers A C B D Specific Absorption Rate (SAR) information:

This ECOEDGE PRO meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: ECOEDGE PRO has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the phone kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an 0mm separation distance between the user's body and the back of the phone. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. ISED Statement English:This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES3 (B)/NMB3(B). French: Cet appareil contient des metteurs/rcepteurs exempts de licence qui sont conformes aux RSS exempts de licence d'Innovation, Sciences et Dveloppement conomique Canada. L'exploitation est soumise aux deux conditions suivantes :

(1) Cet appareil ne doit pas provoquer d'interfrences.

(2) Cet appareil doit accepter toute interfrence, y compris les interfrences susceptibles de provoquer un fonctionnement indsirable de l'appareil. l'appareil numrique du ciem conforme canadien peut 3 (b) / nmb 3 (b). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. cet appareil est conforme l'exemption des limites d'valuation courante dans la section 2.5 du cnr - 102 et conformit avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des donnes canadiennes sur l'exposition aux champs rf et la conformit. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. Cet quipement est conforme aux limites d'exposition aux rayonnements du Canada tablies pour un environnement non contrl. Informations sur le dbit d'absorption spcifique (DAS):

Cette ECOEDGE PRO rpond aux exigences du gouvernement en matire d'exposition aux ondes radio. Les lignes directrices sont bases sur des normes labores par des organisations scientifiques indpendantes travers une valuation priodique et approfondie des tudes scientifiques. Les normes comprennent une marge de scurit substantielle conue pour assurer la scurit de toutes les personnes, quel que soit leur ge ou leur tat de sant. Information et dclaration d'ISDE sur l'exposition aux RF la limite DAS du Canada (ISDE) est de 1,6 W / kg en moyenne sur un gramme de tissu. Types d'appareils: la ECOEDGE PRO a galement t teste par rapport cette limite SAR. Cet appareil a t test pour des oprations typiques portes sur le corps avec le dos de la tablette gard 0 mm du corps. Pour maintenir la conformit avec les exigences d'exposition RF d'ISDE, utilisez des accessoires qui maintiennent une distance de sparation de 0 mm entre le corps de l'utilisateur et l'arrire de la tablette. L'utilisation de clips de ceinture, d'tuis et d'accessoires similaires ne doit pas contenir de composants mtalliques dans son assemblage. L'utilisation d'accessoires qui ne satisfont pas ces exigences peut ne pas tre conforme aux exigences d'exposition aux RF d'ISDE et doit tre vite.

Page 1 of 1 FCC ID: 2AAUI-GDIEXEDGPRO LABEL AND LOCATION ECOEDGE PRO Model: GDI-EXEDGPRO401 FCC ID: 2AAUI-GDIEXEDGPRO

(Size: L5.0cm x 1.5cm) Label Location Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: webmaster@lcs-cert.com | Web: www.lcs-cert.com Scan code to check authenticity

Grace Digital Inc. Agent Authorization Company: Grace Digital Inc. Address: Grace Digital Inc. 10531 4S Commons Drive#166 Suite#430, San Diego, CA 92127, USA Product Name: ECOEDGE PRO Trade Mark: ECOXGEAR FCC ID: 2AAUI-GDIEXEDGPRO Model Number(s): GDI-EXEDGPRO401, GDI-EXEDGPRO402, GDI-EXEDGPRO403 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2022-05-07 Name:

James Florczak Title:

Company: Grace Digital Inc.

Add: 10531 4S Commons Drive#166 Suite#430, San Diego, CA 92127, USA Grace Digital Inc. Tel: 858 748 6343 Fax: /

Date: 2022-05-07 Dear Sir/Madam, To: MiCOM Labs Inc 575 Boulder Court, Pleasanton, California 94566, USA We, Grace Digital Inc. Hereby declares the following statement for MiCOM Labs Inc, PCB board, structure and internal of these model(s) are the same, Only models name is different for these models:

Product name: ECOEDGE PRO Trade Mark: ECOXGEAR Model No.: GDI-EXEDGPRO401, GDI-EXEDGPRO402, GDI-EXEDGPRO403 Sincerely, Clients name / title : James Florczak / EVP, Operations Address: 10531 4S Commons Drive#166 Suite#430, San Diego, CA 92127, USAca Tel: 858 748 6343 Fax: /

E-mail: jamie@gracedigital.net

Grace Digital Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AAUI-GDIEXEDGPRO Date: 2022-05-07 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

Schematic Diagram Block Diagram Operational Description External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: James Florczak Title: /