ENGLISH ESPAOL FRANAIS AEPJS3 Bluetooth Speaker with Magnet and Hook Instructions SPANISH - Bluetooth Speaker with Magnet and Hook Instructions FRENCH - Bluetooth Speaker with Magnet and Hook Instructions Klein Tools AEPJS3 is a powered speaker designed to provide high-quality sound for smart phones, tablets, computers, or other audio devices. The AEPJS3 will also charge common mobile devices like cell phones, tablets, headphones, and other smaller USB devices. CONTENTS AEPJS3 Bluetooth Speaker 39.4" (1 m) USB Type C 23.6" (600 mm) 1/8" (3.5 mm) Auxiliary Cable Instruction Sheet GENERAL SPECIFICATIONS Dimensions: 5.46" x 5.37" x 2.33" (138.6 x 136.4 x 59.2 mm) Weight: 1.14 oz. (520 g) Wireless Compatibility: Devices with Bluetooth Version 4.2 Wireless Connection Range: 100 ft. (30 m) in open space Support Profi les: AD2P, AVRCP, HFP, SPP Output Power: 15W Battery Type: Internal, Li-Ion, 3.63V / 5200mAh Battery Life: Approx. 20 hours at 70% volume Charging Requirements: Maximum 5V DC, Minimum 1A Certifi cations: CE, FCC, IC, & BC, NOM Operating/Charging Temperature: 32 to 104F (0 to 40C) Storage Temperature: -22 to 140F (-30 to 60C) Relative Humidity: <85% non-condensing Drop Protection: 6.6' (2 m) Ingress Protection (IP) Rating: IP54 Specifications subject to change. WARNINGS Read, understand, and follow these instructions to ensure safe operation. Failure to observe these warnings can result in risk of fire or electric shock. Keep these instructions for future reference. No user-serviceable parts inside. Do not open enclosure or attempt to repair this speaker. Never lubricate any part of this speaker. Never place this speaker on other electrical equipment. Do not expose to direct sunlight, open flame, heat sources, equipment that produces heat, or extremes in environmental temperature. Never immerse in water or other liquids. Avoid spilling liquids or falling foreign objects into openings or vents on the speaker enclosure. Water-resistant cover must be properly sealed to achieve specified water &
foreign object ingress protection. Keep seal free of dirt, oil, sand, or other material that interferes with proper sealing. Failure to do so can result in risk of fire or electric shock. Do not open water-resistant cover if wet or in a wet environment. Dry the speaker thoroughly and the seal around water-resistant cover completely before opening water-resistant cover. When speaker is in use or charging, make sure there is adequate space to allow ventilation of internally generated heat. Use safety-rated power supply or wall adapter. Never use power supply or wall adapter that exceeds the specified charging voltage and current. Route the power supply cable so that it will not to be stepped on or pinched by other objects. SYMBOLS ON PRODUCT Warning or Caution Strong Magnetic Field Risk of Electrical Shock Read Manual Conforms with particular Code of Federal regulations BC Meets CEC and DOE energy effi ciency requirements Canada Energy Effi ciency Verifi ed This product has been independently tested by Intertek and meets applicable published standards NOM-NYCE IFETEL WEEE Battery disposal Conformit Europenne: Conforms with European Economic Area directives FEATURE DETAILS (FIG.A) 1 Power Button 10 Battery Status Indicator 2 Skip Backward Button 11 Daisy Chain LED Indicator 3 Play/Pause/Talk Button 12 Nail Hook 4 Skip Forward Button 13 Magnets (2) 5 Daisy Chain Button 14 Auxiliary Aux In Jack 6 - Volume Down Button 15 USB A Charge Out Port 7 + Volume Up Button 16 USB C Charge In/Out Port 8 Voice Control Button 17 Water/Dust-Resistant Cover 9 Bluetooth LED Indicator MAINTENANCE CLEANING: Be sure speaker is turned off and wipe with a clean, dry lint-
free cloth. Do not use abrasive cleaners or solvents. STORAGE: If the speaker is to be left unused for an extended period of time, charge before storing, and recharge periodically during storage, to maintain battery's charging capacity. OPERATING INSTRUCTIONS CHARGING BATTERY Fully charge speaker before use. First-time charge should be at least 4 hours. Connect the USB Type C cable connection to USB charging port 6 ; plug the other end of cable to computer or USB AC adapter or other USB power supply
(not included). USB adapter/power supply should not exceed the specified charging voltage and current (Max. 5V DC, min. 1A). Normal charging time is 3.25 to 4.25 hours. The battery level indicator will illuminate to indicate charging status
(see tables below). CHARGING STATUS LED INDICATORS Not Illuminated LED Solid Yellow Solid Green Blinking Cascading Status Not illuminated Not illuminated Not illuminated Blinking red Not illuminated Not illuminated Cascading Yellow Cascading red Not illuminated Cascading Green Cascading Yellow Cascading red Cascading Green Cascading Green Cascading Yellow Cascading red Solid Green Solid Green Solid Yellow Solid red Solid Red
% Charged 0% to 24% charged 25% to 49% charged 50% to 74% charged 75% to 99% charged 100% charged ON/OFF: Press & hold power button 1 for 3 seconds, a tone will sound. Unit will automatically power off after 20 minutes of inactivity. NOTE: Turn unit off when not in use to prolong battery life. PAIRING: Wireless connection activates automatically and is ready to pair when unit is turned on. On your Bluetooth wireless compatible device, enable Bluetooth and search/scan for devices that can be paired. Select AEPJS3 when it appears (refer to the user manual of your device). If necessary, enter 0000 as pairing passcode. A tone sounds after a successful pairing. NOTE: Unit automatically attempts to connect the last paired wireless device device but is ready to pair with any compatible device if the last paired device is not detected within 5 seconds of powering on. DISCONNECT PAIRING:
1) Turn unit off; -or 2) Double-press Power Button 1 . Bluetooth LED Indicator 9 will blink; -or 3) Plug a cable into Aux jack 14 ; -or 4) turn off Bluetooth wireless connection in paired device. RESET WIRELESS CONNECTION OR PAIRING WITH DIFFERENT DEVICES:
Double-press Power Button 1 (tone sounds). Repeat Pairing procedure with different devices. FIG. A TOP / SPANISH / FRENCH 9 1 2 3 4 5 11 10 6 7 8 BOTTOM / SPANISH / FRENCH 15 14 16 BACK / PARTE POSTERIOR / ARRIRE 17 12 13 13 1390371 Rev 06/20 A ENGLISH ESPAOL FRANAIS OPERATING INSTRUCTIONS PLAYING AUDIO: Use your device to control the speaker or use the built-in control buttons on the speaker. Press the Play/Pause/Talk button 3 to play or pause audio on your device. Press the - 6 or + 7 button to adjust the speaker volume. A tone will sound when maximum volume is reached. Volume may also be controlled from your audio device. Press the Skip Forward 4 or Skip Backward 2 buttons to skip backward or forward (respectively) during a song. AUXILIARY AUDIO-IN: Connect one end of the auxiliary cable to the AUX jack 14 of the speaker; plug the other end of cable to line-out or headphone jack of your device. SPEAKERPHONE OPERATION:
When an incoming call occurs, playing music is muted & ring tone sounds. Short-press Play/Pause/Talk 3 button to answer the call, or long-press to ignore. To disconnect the call, short press the Play/Pause/Talk button 3 to hang up. DAISY-CHAINING: Once you have your AEPJS3 Speaker connected to a Bluetooth device, you can connect a second AEPJS3 speaker to your already connect AEPJS3 speaker. 1. Ensure your primary AEPJS3 speaker is turned on. 2. Turn on your secondary AEPJS3 speaker. 3. Press the Daisy Chain button 5 on both AEPJS3 speakers. 4. Upon successful connection, a tone will sound on both speakers and the Daisy Chain LED 11 will remain lit. 5. To disable daisy-chaining, press the daisy-chain button on either of the two speakers. NOTE: The daisy chain connection between the two AEPJS3 speakers will NOT automatically reconnect after the speakers are turned off. To reconnect, follow the Daisy-chaining steps above. VOICE CONTROL: Press the voice control button 8 to activate the voice assistant on your device. NOTE: Before using this function, the devices must be connected to the speaker via Bluetooth . LOW BATTERY INDICATION: The Red LED on the Battery Status Indicator 10 will flash on/off when battery level drops to approximately 5%. Speaker will automatically power off when the battery level is below 2%. Recharge speaker as soon as possible. POSITIONING SPEAKER:
Make sure that front of speaker is not obstructed. Stand speaker upright on a flat, level, stable surface. Attach speaker to a metal surface via the magnets 13 on the back of the unit. DO NOT mount to electrical equipment. Hang from a nail (or like item) by opening the Nail Hook 12 and placing the Nail Hook over the head of the nail. CHARGING DEVICES:
NOTE: For best results, use cable provided with your device. 1. Connect the cable to your device. 2. Connect the charging cable to the USB A Charge Out Port 15 or USB C Charge In/Out Port 16. Your device will automatically begin charging. The device being charged should provide indication that charging has begun. 1. Press and hold the Power button 1 for 3 seconds to turn on the speaker; your device will begin charging. 2. Press and hold the Power button 1 again for 3 seconds and all functions will power off; your device will stop charging. 3. When AEPJS3 is in Charge-Out-Only mode, it will automatically shut down once charging is complete and current is no longer being drawn by the device. Repeat these steps to charge another device. FCC & IC COMPLIANCE COMPLIANCE This device complies with part 15 of the FCC RULES and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation. NOTE: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help FCC RF EXPOSURE STATEMENTS:
This transmitter must not be colocated or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 5mm between the radiator and your body or nearby persons. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. IC NOTICE TO CANADIAN USERS This device complies with industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation of the device. Le prsentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareildoit accepter tout brouillageradiolec triquesubi, mmesi le brouillageest susceptible d'encompromettre le fonctionnement. This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. This Class B digital apparatus complies with Canadian ICES-003. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 5 mm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC RADIATION EXPOSURE STATEMENT:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5mm between the radiator and your body. IFETEL REPORT For use in Mexico, the operation of this equipment is subject to the following two conditions: (1) This equipment or device does not cause harmful interference and
(2) this equipment or device accepts any interference, including that which can cause undesired operation. DISPOSAL / RECYCLE Do not place equipment and its accessories in the trash. Items must be properly disposed of in accordance with local regulations. Please see www.epa.gov or www.erecycle.org for additional information. CUSTOMER SERVICE KLEIN TOOLS, INC. 450 Bond Street, Lincolnshire, IL 60069 1-800-553-4676 customerservice@kleintools.com www.kleintools.com The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Klein Tools, Inc. is under license.