Grandstream Networks, Inc. 126 Brookline Ave, 3rd Floor Boston, MA 02215 USA Voice: (617) 566-9300 Fax: (617) 249-1987 www.grandstream.com In all EU member states, operation of 5150
- 5350 MHz is restricted to indoor use only. For Warranty and RMA information, please visit www.grandstream.com GRP2612 GRP2612P GRP2612W Carrier-Grade HD IP Phones Quick Installation Guide Content English...............................................................................1
..........................................................................6 Espaol............................................................................11 Franais...........................................................................16 Deutsch............................................................................21 Italiano.............................................................................26
.............................................................................31 Portugus....................................................................... 36 Polski............................................................................. 41 EN The GRP2612/GRP2612P/GRP2612W is not pre-
configured to support or carry emergency calls to any type of hospital, law enforcement agency, medi-
cal care unit (Emergency Service(s)) or any other kind of Emergency Service. You must make addi-
tional arrangements to access Emergency Services. It is Your responsibility to purchase SIP-compliant Internet telephone service, properly configure the GRP2612/GRP2612P/GRP2612W to use that ser-
vice, and periodically test your configuration to con-
firm that it works as You expect. If You do not do so, it is Your responsibility to purchase traditional wire-
less or landline telephone services to access Emer-
gency Services. GRANDSTREAM DOES NOT PROVIDE CON-
NECTIONS TO EMERGENCY SERVICES VIA THE GRP2612/GRP2612P/GRP2612W. NEITHER GRANDSTREAM NOR ITS OFFICERS, EMPLOY-
EES OR AFFILIATES MAY BE HELD LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS, AND YOU HEREBY WAIVE ANY AND ALL SUCH CLAIMS OR CAUSES OF ACTION ARISING FROM OR RELAT-
ING TO YOUR INABILITY TO USE THE GRP2612/
GRP2612P/GRP2612W TO CONTACT EMERGEN-
CY SERVICES, AND YOUR FAILURE TO MAKE ADDITIONAL ARRANGEMENTS TO ACCESS EMERGENCY SERVICES IN ACCORDANCE WITH THE IMMEDIATELY PRECEDING PARAGRAPH.
~1~
PRECAUTIONS:
WARNING: Please DO NOT power cycle the GRP2612/GRP2612P/
GRP2612W during system boot up or firmware upgrade. You may cor-
rupt firmware images and cause the unit to malfunction. WARNING: Use only the power adapter included in the GRP2612/
GRP2612W package. Using an alternative non-qualified power adapter may possibly damage the unit. OVERVIEW:
GRP2612/GRP2612P/GRP2612W is a next generation enter-
prise IP Phone featuring 4 dual-color line keys (can be digitally programmed as up to 16 provisionable BLF/fast-dial keys), 2.4
(320x240) TFT color LCD, 4 programmable context-sensitive soft keys, 100M network ports, integrated PoE (GRP2612P
& GRP2612W only), integrated dual-band WiFi (GRP2612W only), 3-way conference, and Electronic Hook Switch (EHS). The GRP2612/GRP2612P/GRP2612W delivers superior HD audio quality, rich and leading-edge telephony features, protection for privacy, and broad interoperability with most 3rd party SIP devic-
es and leading SIP/NGN/IMS platforms. GRP2612/GRP2612P/
GRP2612W is the perfect choice for enterprise users looking for a high quality, feature rich multi-line executive IP phone with ad-
vanced functionalities and performance. PACKAGE CONTENTS:
1x Phone Main Case 1x Handset 1x Phone Cord 1x Phone Stand 5V 1x 5V Power adapter (with GRP2612/GRP2612W only) 1x Ethernet Cable 1x Quick Installation Guide 1x GPL license
~2~
PHONE SETUP:
Slots for the wall mount spacers and phone stand Kensington Lock PC Port LAN Port Wall mount Headset Port Phone Stand Handset Port Power Installing the phone (Wall Mount *sold separately):
1. Attach the wall mount spacers to the slot for wall mount spacers on the back of the phone. 2. Attach the phone to the wall via the wall mount hole. 3. Pull out the tab from the handset cradle (See figure below). 4. Rotate the tab and plug it back into the slot with the extension up to hold the handset while the phone is mounted on the wall (See figure below). Wall mount Handset Rest Tab with exten-
sion up Tab with exten-
sion down Installing the phone (Phone Stand) :
For installing the phone on the table with the phone stand, attach the phone stand to the bottom of the phone where there is a slot for the phone stand. (Upper half, bottom part). CONNECTING THE PHONE:
To setup the GRP2612/GRP2612P/GRP2612W, follow the steps below:
1. Connect the handset and main phone case with the phone cord. 2. Connect the 5V DC output plug to the power jack on the phone; plug the pow-
er adapter into an electrical outlet. If PoE switch is used in step 3 (GRP2612P/
GRP2612W only), this step could be skipped. 3. Network connection is possible via two methods which are described below. Using Ethernet:
- Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of the router) using the Ethernet cable. Using WiFi (GRP2612W only):
- On LCD menu, navigate to SystemNetworkWiFi settings and enable WiFi.
- Select Scan and GRP2612W will automatically start scanning within the range.
- A list of WiFi networks will be displayed. Select the desired network, and if required, enter the correct password to connect. 4. The LCD will display provisioning or firmware upgrade information. Before con-
tinuing, please wait for the date/time display to show up. 5. Using the phone embedded web server or keypad configuration menu, you can further configure the phone using either a static IP or DHCP. PHONE DESCRIPTION:
Line keys Soft keys Hold Message Transfer Standard keypad Message Waiting Indicator Headset Mute Navigation keys Menu/OK key Volume Speaker Send
~3~
~4~
PHONE CONFIGURATION:
Configure the GRP2612/GRP2612P/GRP2612W using a Web Browser:
1. Ensure your phone is powered up and connected to the Internet. 2. Press and hold the UP button for 3 seconds to see the IP address. 3. Type the phones IP address in your PC browser. 4. Enter admins username and password to access the configuration menu. (The factory default username is admin while the default random password can be found on the sticker at the back of the unit). Configure the GRP2612/GRP2612P/GRP2612W using the Keypad:
1. Make sure the phone is idle. 2. Press the MENU key to access the keypad MENU to configure the phone. 3. Select MENU Phone SIP Account to configure settings for SIP Proxy, Outbound Proxy, SIP User ID, SIP Auth ID and SIP Password. 4. Follow MENU options to configure the basic features of the phone. For ex-
ample: the IP address if using a static IP. For details, please check GRP2612/
GRP2612P/GRP2612W User Manual. 5. Please contact your ITSP for additional settings that may be necessary to con-
figure the phone. Refer to online documents and FAQ for more detailed information:
http://www.grandstream.com/our-products This product is covered by one or more of the U.S. patents (and any foreign patent counterparts thereto) identified at www.cmspatents.com.
~5~
ZH GRP2612/GRP2612P/GRP2612W
() SIP GRP2612/GRP2612P/GRP2612W GRP2612/GRP2612P/
GRP2612W Networks GRP2612/
Grandstream G R P 2 6 1 2 P / G R P 2 6 1 2 W Grandstream Networks GRP2612/GRP2612P/
GRP2612W
~6~
:
:
:
:
GRP2612/GRP2612P/GRP2612W IP 416BLF 2.4320x240TFTLCD4 100MPoEGRP2612P/
GRP2612W WiFi (GRP2612W), EHS GRP2612/GRP2612P/GRP2612W SIP SIP / NGN / IMS IP GRP2612/
GRP2612P/GRP2612W
:
GRP26121 1 1 1 5V 1 GRP2612/GRP2612W) 1 1 GPL1
:
PC
(*):
1. 2. 3. 4.
():
~7~
~8~
:
1. ;
2. , 3 PoEGRP2612P/GRP2612W ;
3. Ethernet:
-
RJ-45 LCDWiFi (GRP2612W):
- /WiFi WiFi
- LCDWiFi.
- WiFi 4. /
;
5. WEBIP DHCP
:
/
:
WEB GRP2612/GRP2612P/GRP2612W:
1. 2. 3IP 3. IP 4. admin, GRP2612/GRP2612P/GRP2612W:
1. 2. /
3. SIPSIPSIP SIP 4. IP GRP2612/GRP2612P/GRP2612W 5. http://www.grandstream.com/our-products
~9~
~10~
ES El GRP2612/GRP2612P/GRP2612W no esta pre-
configurado para soportar o realizar llamadas de emergencia a ningn tipo de hospital, agencia poli-
cial, unidad de cuidado medico o cualquier otro ser-
vicio de emergencia. Es su responsabilidad contratar un servicio de telefona de Internet compatible con el protocolo SIP, configurar el GRP2612/GRP2612P/
GRP2612W para utilizar dicho servicio y peridica-
mente probar esta configuracin para confirmar que este trabajando como usted espera. Si es requisito no es completado, es su responsabilidad contratar un servicio de telefona fija o celular para tener ac-
ceso a servicios de emergencia. GRANDSTREAM NO PROVEE CONEXIONES A SERVICIOS DE EMERGENCIA A TRAVS DEL GRP2612/GRP2612P/GRP2612W. NI GRAND-
STREAM NI NINGUNO DE SUS OFICIALES, EM-
PLEADOS O AFILIADOS SON RESPONSABLES DE NINGUNA DEMANDA, DAO O PERDIDA QUE ESTO PUEDA OCASIONAR Y MEDIANTE ESTE COMUNICADO USTED RENUNCIA A CUALQUIER RECLAMO O CONSECUENCIA PROVENIENTE O RELACIONADO DE LA INHABILIDAD DE CON-
TACTAR SERVICIOS DE EMERGENCIAS CON EL GRP2612/GRP2612P/GRP2612W Y SU FALTA DE NO HABER HECHO LOS ARREGLOS DE LUGAR PARA ACCESAR ESTOS SERVICIOS DE EMER-
GENCIA DE ACUERDO CON EL PRRAFO ANTE-
RIOR.
~11~
PRECAUCIONES:
ADVERTENCIA: No apague el GRP2612/GRP2612P/GRP2612W cu-
ando las luces indicadoras se encuentren en estado intermitente al mo-
mento de iniciar el equipo o actualizar el firmware. Esto podra ocasionar que la unidad no contine funcionando correctamente. ADVERTENCIA: Solamente utilice la fuente de poder incluida en el pa-
quete del GRP2612/GRP2612W. Utilizar un adaptador de poder alterna-
tivo no certificado podra daar su unidad. INFORMACIN GENERAL:
El GRP2612/GRP2612P/GRP2612W es la nueva generacin de telfonos IP que implementa 4 teclas de lnea de color dual (se pueden programar digitalmente hasta 16 teclas de marcado r-
pido/BLF), Pantalla LCD a color 2.4 (320x240) TFT, 4 teclas de contenido programables, puertos de red de 100M, PoE integrado
(solo GRP2612P/GRP2612W), soporte de Wi-Fi (solo GRP2612W) conferencias de 3 vas e interruptor elctrico (EHS). El GRP2612/
GRP2612P/GRP2612W entrega mayor calidad de audio, funciones de calidad y vanguardistas, proteccin de la privacidad, y una am-
plia operatividad con dispositivos SIP de terceros y plataformas SIP/
NGN/IMS. El GRP2612/GRP2612P/GRP2612W es la perfecta elec-
cin para clientes empresariales que buscan alta calidad en telfo-
nos ejecutivos de gama alta en funcionalidad y funcionamiento. CONTENIDO DEL PAQUETE:
1x Base Principal 1x Auricular 1x Cable Telefnico 1x Soporte de Telfono 5V 1x Adaptador de Aliment-
acin 5V (solo GRP2612/
GRP2612W) 1x Cable Ethernet 1x Guia de Instalaci Rapida 1x Licencia GPL
~12~
INSTALACIN DEL TELEFONO:
Ranuras para soporte y mon-
tura de pared Montura de Pared Kensington Lock Puerto PC Puerto LAN Puerto de Receptor de Cabeza Puerto Auricular Alimentacin Soporte de Telfono Inserte la montura de pared en la ranura de atrs del telfono. Instalando El Telfono (Montura de Pared *Se vende por separado):
1. 2. Coloque el telfono en la pared utilizando los orificios. 3. Hal la lengeta de la horquilla del auricular. (Ver figura abajo). 4. Coloque la lengeta en la misma ranura de tal manera que soporte el auricu-
lar. (Ver figura abajo). Montura de Pared Soporte de Auricular Lengeta con extensin hacia arriba Lengeta con extensin hacia abajo Instalando El Telfono (Soporte de Telfono):
Para instalar el telfono sobre un escritorio, utilice el soporte del telfono y colquelo en la parte inferior del telfono donde se encuentra la ranura para el soporte. CONECTANDO EL TELFONO:
Para configurar el GRP2612/GRP2612P/GRP2612W, siga los pasos detallados abajo:
1. Conecte el auricular a la unidad utilizando el cable telefnico. 2. Conecte la fuente de poder de 5V DC a la salida de alimentacin del telfono y la salida de electricidad.Si el puerto PoE es utilizado en el paso 3 (solo GRP2612P/GRP2612W), puede saltar este paso. 3. La conexin de red es posible a travs de dos mtodos descritos abajo. Usando Ethernet:
- Conecte el puerto LAN del telfono al jack RJ45 de un Hub/switch o router usando el cable Ethernet. Usando WiFi (solo GRP2612W):
- En el men LCD, navegue a SistemaRedConfiguracin WiFi y habilite WiFi.
- Seleccione Escanear y el GRP2612W iniciar automaticamente el esca-
neo dentro del rango.
- Se mostrar una lista de redes WiFi. Seleccione la red deseada, y si es necesario, ingrese la contrasea correcta para conectarse. 4. La pantalla LCD va a mostrar un mensaje de aprovisionamiento o actual-
izacin de firmware. Antes de continuar esperar hasta que la pantalla muestra el tiempo y la fecha 5. Utilizando la interfase Web integrada accediendo la direccin IP del telfono en un navegador Web o mediante el teclado, configure el telfono utilizando una direccin IP esttica o dinmica con DHCP. DESCRIPCIN DEL TELFONO:
Teclas de Linea Teclas Suaves Retener Mensaje Transferencia Teclado Estndar Indicador de Men-
saje en Espera Receptor de Cabeza Silenciar Teclas de Navegacin Tecla de Menu / OK Volumen Altavoz Enviar
~13~
~14~
CONFIGURACIN DEL TELFONO:
Configurando el GRP2612/GRP2612P/GRP2612W utilizando un navegador web:
1. Asegure que su telfono este conectado a la red y tenga electricidad. 2. Presione y mantenga el botn Arriba por 3 seg. Para ver la direccin IP. 3. Escriba la direccin IP en su navegador web. 4. Ingrese como administrador para ver el men de configuracin. (El usuario es admin y la contrasea aleatoria debera estar en la etiqueta en la parte trasera de la unidad). FR Configurando el GRP2612/GRP2612P/GRP2612W usando el teclado:
1. Asegure que el telfono se encuentre en reposo. 2. Presione la botn de MENU para acceder a el menu de teclado para configu-
rar el telfono. 3. Seleccione MENU Telfono SIP Cuenta para configurar el SIP Proxy, Outbound Proxy, SIP User ID,SIP Auth ID, SIP Password.. 4. Siga las opciones de MENU para configurar las funciones bsicas del telfono por ejemplo: La Direccin IP, en caso de usar una direccin IP esttica.Para obtener ms informacin, consulte el Manual del usuario de la GRP2612/
GRP2612P/GRP2612W. 5. Por favor contacte a su PSI (Proveedor de Servicio de Internet) para los ajust-
esadicionales que sean necesarios para configurar el telfono. Por favor, descargue el Manual del usuario y revisar la AYUDA para obtener instrucciones ms detalladas:
http://www.grandstream.com/our-products Le GRP2612/GRP2612P/GRP2612W nest pas prcon-
figur pour prendre en charge ou acheminer les appels durgence adresss aux hpitaux, organismes chargs de lapplication de la loi, centres de soins mdicaux (
service(s) durgence ) ou tout autre type de service durgence. Vous devez prendre des dispositions suppl-
mentaires pour assurer laccs aux services durgence. Il est de votre responsabilit de vous abonner un ser-
vice de tlphonie Internet conforme au protocole SIP, de configurer correctement le GRP2612/GRP2612P/
GRP2612W pour utiliser ce service, et de tester pri-
odiquement votre configuration pour vous assurer quelle fonctionne comme prvu. Si vous ne le faites pas, vous devez vous abonner un service de tlphonie sans fil ou fixe traditionnel pour accder aux services durgence. GRANDSTREAM NE FOURNIT PAS DE CONNEX-
IONS AUX SERVICES DURGENCE VIA LE GRP2612/
GRP2612P/GRP2612W. NI GRANDSTREAM, NI SES DIRIGEANTS, EMPLOYES OU SOCIETES AFFILIEES NE PEUVENT ETRE TENUS RESPONSABLES POUR TOUTE RECLAMATION, TOUT DOMMAGE OU PERTE, ET VOUS RENONCEZ PAR LES PRESENTES A TOUTE RECLAMATION OU TOUT MOTIF DACTION EN JUSTICE DCOULANT OU LIE A VOTRE INCAPA-
CITE DUTILISER LE GRP2612/GRP2612P/GRP2612W POUR CONTACTER LES SERVICES DURGENCE, ET TOUTE NEGLIGENCE DE VOTRE PART QUANT A PRENDRE DES DISPOSITIONS SUPPLEMENTAIRES POUR ACCEDER AUX SERVICES DURGENCE CON-
FORMMENT LALINA PRCDENT.
~15~
~16~