all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 |
|
User Manual | Users Manual | 3.97 MiB | ||||
1 2 3 4 | Attestation Statements | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | External Photos | |||||||
1 2 3 4 | ID Label/Location Info | |||||||
1 2 3 4 | Internal Photos | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Test Report |
1 2 3 4 | User Manual | Users Manual | 3.97 MiB |
, Inc. Netw works, T 210RMT System m for A AndroidTTM andstr ream C3210/ G GVC32 o Conf ference r Guide e Gra GVC Vide User COPYRIGHT 2017 Grandstream Networks, Inc. http://www.grandstream.com All rights reserved. Information in this document is subject to change without notice. Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for any purpose without the express written permission of Grandstream Networks, Inc. is not permitted. The latest electronic version of this guide is available for download here:
http://www.grandstream.com/support Grandstream is a registered trademark and Grandstream logo is trademark of Grandstream Networks, Inc. in the United States, Europe and other countries. CAUTION Changes or modifications to this product not expressly approved by Grandstream, or operation of this product in any way other than as detailed by this guide, could void your manufacturer warranty. WARNING Please do not use a different power adaptor with devices as it may cause damage to the products and void the manufacturer warranty. GVC3210 User Guide Version 1.0.1.13 P a g e |2 FCC Authentication For Video Conference System, model: GVC3210 FCC ID: YZZGVC3210 For Bluetooth Remote Control, model: GVC3210 RMT FCC ID: YZZGVC3210RMT Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
For GVC3210 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. GVC3210 User Guide Version 1.0.1.13 P a g e |3 For GV This equ environm This tran CE Au VC3210 RMT T mplies with FC uipment com ment. nsmitter mus st not be co-l uthentica tion CC radiation exposure lim mits set forth for an uncon ntrolled ocated or op perating in co onjunction wi ith any other r antenna or t transmitter. Grandstream liance with D text of the E ww.grandstre m Networks, Directive 201 U declaration eam.com/sup Inc. declare 4/53/EU. n of conform pport/resourc mity is availab ces/
es that the ra dio equipme ent GVC3210 0 and GVC32 210 RMT are e ble at the follo owing interne et address:
Hereby, in comp The full http://ww G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |4 4 GNU GPL INFORMATION GVC3210 firmware contains third-party software licensed under the GNU General Public License (GPL). Grandstream uses software under the specific terms of the GPL. Please see the GNU General Public License (GPL) for the exact terms and conditions of the license. Grandstream GNU GPL related source code can be downloaded from Grandstream Web site from:
http://www.grandstream.com/sites/default/files/Resources/gvc32xx-gpl.tar.gz GVC3210 User Guide Version 1.0.1.13 P a g e |5 Table of Contents DOCUMENT PURPOSE ............................................................................................... 16 CHANGE LOG .............................................................................................................. 17 Firmware Version 1.0.1.13 ................................................................................................................... 17 Firmware Version 1.0.1.6 ..................................................................................................................... 17 WELCOME ................................................................................................................... 18 PRODUCT OVERVIEW ................................................................................................ 19 Safety Compliances ............................................................................................................................. 21 Warranty ............................................................................................................................................... 21 INSTALLING GVC3210 ................................................................................................ 22 Equipment Package Content ............................................................................................................... 22 Connecting GVC3210 .......................................................................................................................... 23 GETTING TO KNOW GVC3210 ................................................................................... 27 Remote Control .................................................................................................................................... 27 Remote Control Keys and Touchpad ............................................................................................ 27 Using the Remote Control ............................................................................................................ 30 Capturing Screenshot using the Remote Control ......................................................................... 30 Using Mouse & Keyboard .................................................................................................................... 31 Using the LED Indicator ....................................................................................................................... 31 Status Icons ......................................................................................................................................... 32 Using the Onscreen Keyboard ............................................................................................................. 33 English Keyboard.......................................................................................................................... 33 Numbers and Symbols ................................................................................................................. 34 Home Screen ....................................................................................................................................... 34 Screen Lock ......................................................................................................................................... 35 CONNECTING TO NETWORK AND DEVICES ........................................................... 36 GVC3210 User Guide Version 1.0.1.13 P a g e |6 Ethernet ............................................................................................................................................... 36 Using IPv4 .................................................................................................................................... 37 Using IPv6 .................................................................................................................................... 37 Wi-Fi ..................................................................................................................................................... 38 Connecting to Wi-Fi Network ........................................................................................................ 38 Wi-Fi Protected Setup (WPS) ....................................................................................................... 38 Add Network ................................................................................................................................. 40 Wi-Fi Direct ................................................................................................................................... 40 Advanced Settings ........................................................................................................................ 41 Wi-Fi Display ........................................................................................................................................ 42 Bluetooth .............................................................................................................................................. 43 Pairing GVC3210 with a Bluetooth Device ................................................................................... 43 Connecting to a Bluetooth Device ................................................................................................ 43 Using Bluetooth Remote Control .................................................................................................. 44 Transfer Files with Bluetooth ........................................................................................................ 45 Using Bluetooth Headset .............................................................................................................. 45 VPN Settings ........................................................................................................................................ 45 VLAN Settings ...................................................................................................................................... 47 LLDP Settings ...................................................................................................................................... 48 802.1X Mode ........................................................................................................................................ 48 CAMERA ...................................................................................................................... 49 Preset ................................................................................................................................................... 50 Add Preset .................................................................................................................................... 50 Edit Preset .................................................................................................................................... 50 Delete Preset ................................................................................................................................ 50 Apply Preset ................................................................................................................................. 51 Initial Position ................................................................................................................................ 51 Camera Parameters Configurations .................................................................................................... 51 PERIPHERAL ............................................................................................................... 53 GVC3210 User Guide Version 1.0.1.13 P a g e |7 External USB Device ........................................................................................................................... 53 Using USB Mouse/Keyboard ........................................................................................................ 53 Using USB Storage Device .......................................................................................................... 53 Micro SD Card ..................................................................................................................................... 53 Microphone and Speaker ..................................................................................................................... 54 MAKING PHONE CALLS ............................................................................................. 55 Account ................................................................................................................................................ 55 Dial Screen .......................................................................................................................................... 55 Dialing a Number Directly ............................................................................................................. 56 Redial ............................................................................................................................................ 56 Dialing a Number via Contact ....................................................................................................... 56 Dialing a Number via Call History ................................................................................................. 57 Direct IP Call ................................................................................................................................. 57 Paging/Intercom ............................................................................................................................ 58 Answering a Call .................................................................................................................................. 58 Call Hold .............................................................................................................................................. 59 Mute Local Audio ................................................................................................................................. 59 Call Recording ..................................................................................................................................... 59 DND (Do Not Disturb) .......................................................................................................................... 60 Missed Call .......................................................................................................................................... 60 Call Forward ......................................................................................................................................... 60 Remote Camera Control in Call (FECC) .............................................................................................. 60 IPVIDEOTALK CONFERENCE .................................................................................... 62 Device Layout ...................................................................................................................................... 62 Initiating Conference ............................................................................................................................ 62 Answering an Incoming Call in Conference ......................................................................................... 62 Conference Management .................................................................................................................... 63 Invite Members to Conference ............................................................................................................. 66 Conference Control .............................................................................................................................. 66 GVC3210 User Guide Version 1.0.1.13 P a g e |8 Pause Conference ............................................................................................................................... 67 Custom PIP .......................................................................................................................................... 67 Presentation Sharing ........................................................................................................................... 68 Conference Recording ......................................................................................................................... 69 Call Details ........................................................................................................................................... 70 Participants List .................................................................................................................................... 71 Open Dial Keyboard ............................................................................................................................. 71 End Conference ................................................................................................................................... 71 Power Off During a Conference Call ................................................................................................... 72 IPVideoTalk Application ........................................................................................................................ 72 Contacts ........................................................................................................................................ 73 Notices .......................................................................................................................................... 74 Settings ......................................................................................................................................... 76 Join an IPVideoTalk Meeting ........................................................................................................ 77 Busy Tone Responses .................................................................................................................. 77 Manually Start IPVideoTalk Tip ..................................................................................................... 78 Hand Down/Up in IPVideoTalk Meeting ....................................................................................... 78 Stop Sharing Local Camera ......................................................................................................... 80 Stop Video Upload Icon ................................................................................................................ 80 Start Cloud Recording .................................................................................................................. 80 Schedule .............................................................................................................................................. 81 View Conference Details .............................................................................................................. 82 Add Scheduled Conference .......................................................................................................... 83 Edit Scheduled Conference .......................................................................................................... 84 Reschedule Conference ............................................................................................................... 85 Delete Scheduled Conference ...................................................................................................... 85 Voicemail .............................................................................................................................................. 85 Call Features ........................................................................................................................................ 86 ADDITIONAL FUNCTIONS .......................................................................................... 89 GVC Remote Client Application ........................................................................................................... 89 GVC3210 User Guide Version 1.0.1.13 P a g e |9 BlueJeans ............................................................................................................................................ 90 APPLICATIONS ............................................................................................................ 91 Contacts ............................................................................................................................................... 91 Add Contact .................................................................................................................................. 92 Search Contacts ........................................................................................................................... 95 Manage Contacts.......................................................................................................................... 95 Groups .......................................................................................................................................... 96 LDAP contacts ..................................................................................................................................... 98 LDAP Settings............................................................................................................................... 98 Search LDAP Contacts ............................................................................................................... 101 Add Search Result into Local Contacts ...................................................................................... 101 Call History ......................................................................................................................................... 102 Add Contact from Call History .................................................................................................... 103 Delete Call History ...................................................................................................................... 104 Conference Schedule via Call History ........................................................................................ 104 File Manager ...................................................................................................................................... 104 Copy File ..................................................................................................................................... 105 Send File ..................................................................................................................................... 105 Delete File ................................................................................................................................... 105 Rename File ............................................................................................................................... 106 Recording ........................................................................................................................................... 106 Recording Settings ..................................................................................................................... 107 Setup Wizard ..................................................................................................................................... 107 Backup ............................................................................................................................................... 109 Backup Data ............................................................................................................................... 109 Restore Backup Data ................................................................................................................. 112 Set Backup Path ......................................................................................................................... 112 Diagnosis ........................................................................................................................................... 112 Browser .............................................................................................................................................. 113 Sync Local Schedule with Google Calendar ..................................................................................... 113 GVC3210 User Guide Version 1.0.1.13 P a g e |10 Custom App on Home Screen ........................................................................................................... 117 Uninstall Application ........................................................................................................................... 119 GS MARKET ............................................................................................................... 120 Search Apps ....................................................................................................................................... 120 Download and Install Apps ................................................................................................................ 120 Update Apps ...................................................................................................................................... 120 GVC3210 WEB UI FEATURES ................................................................................... 122 Accessing GVC3210 Web GUI .......................................................................................................... 122 Saving Changes ................................................................................................................................. 123 Definitions .......................................................................................................................................... 123 Toolbar ............................................................................................................................................... 124 Call Page ........................................................................................................................................... 124 Making a Call .............................................................................................................................. 125 Conference Control..................................................................................................................... 126 Contacts Page ................................................................................................................................... 127 Contacts ...................................................................................................................................... 127 Groups ........................................................................................................................................ 128 Schedule ..................................................................................................................................... 129 Call History ................................................................................................................................. 130 LDAP .......................................................................................................................................... 130 Device Control Page .......................................................................................................................... 131 Video Control .............................................................................................................................. 131 Audio Control .............................................................................................................................. 132 FACTORY RESET ...................................................................................................... 134 Reset via LCD .................................................................................................................................... 134 Reset via Web UI ............................................................................................................................... 135 Reset via Reset Hole ......................................................................................................................... 135 EXPERIENCING GVC3210 ........................................................................................ 136 GVC3210 User Guide Version 1.0.1.13 P a g e |11 Table of Tables Table 1: GVC3210 Technical Specifications ............................................................................................... 19 Table 2: GVC3210 Package List ................................................................................................................. 22 Table 3: GVC3210 Front Panel ................................................................................................................... 23 Table 4: GVC3210 Back Panel ................................................................................................................... 24 Table 5: GVC3210 Remote Control Keys ................................................................................................... 27 Table 6: GVC3210 LED Indicator Status Descriptions ................................................................................ 31 Table 7: GVC3210 Status Icons Descriptions ............................................................................................. 32 Table 8: GVC3210 VPN File Parameters .................................................................................................... 47 Table 9: GVC3210 VLAN Configuration Parameters .................................................................................. 47 Table 10: GVC3210 LLDP Configuration Parameters ................................................................................ 48 Table 11: 802.1x Mode Parameters on GVC3210 ...................................................................................... 48 Table 12: GVC3210 Camera Parameters ................................................................................................... 52 Table 13: GVC3210 IPVT Call Screen Bottom Menu Icons ........................................................................ 63 Table 14: GVC3210 Conference Member Status Descriptions ................................................................... 65 Table 15: GVC3210 Add Conference Parameters ...................................................................................... 84 Table 16: GVC3210 Feature Code for SIP Account .................................................................................... 86 Table 17: GVC3210 Import Contacts Parameters ...................................................................................... 93 Table 18: GVC3210 Download Contacts Parameters ................................................................................. 94 Table 19: GVC3210 Export Contacts Parameters ...................................................................................... 96 Table 20: GVC3210 LDAP Settings Parameters ......................................................................................... 98 Table 21: GVC3210 Web Access .............................................................................................................. 123 Table 22: GVC3210 Web UI - Call Settings .............................................................................................. 125 Table 23: GVC3210 Web UI - Audio Control Parameters ......................................................................... 132 GVC3210 User Guide Version 1.0.1.13 P a g e |12 Table of Figures Figure 1:GVC3210 Package Content ......................................................................................................... 22 Figure 2:GVC3210 Front/Top/Bottom Panel ............................................................................................... 23 Figure 3: GVC3210 Right/Left Panel .......................................................................................................... 24 Figure 4: GVC3210 Right/Left Panel Connection Diagram ........................................................................ 26 Figure 5: Deploy GVC3210 with other Devices .......................................................................................... 26 Figure 6: GVC3210 Remote Control ........................................................................................................... 27 Figure 7: GVC3210 Top Status Bar Dropdown Menu ................................................................................. 32 Figure 8: Soft Keyboard - English Input Method ......................................................................................... 33 Figure 9: English Input Method Capslock ................................................................................................ 34 Figure 10: Soft Keyboard - Symbols and Numbers .................................................................................... 34 Figure 11: Soft Keyboard - More Symbols and Numbers ........................................................................... 34 Figure 12: GVC3210 Home Screen ............................................................................................................ 35 Figure 13: Ethernet Settings ....................................................................................................................... 36 Figure 14: GVC3210 Add Wi-Fi Screen ...................................................................................................... 38 Figure 15: GVC3210 Push button WPS feature ......................................................................................... 39 Figure 16: GVC3210 PIN Entry WPS feature ............................................................................................. 39 Figure 17: GVC3210 Add network feature .................................................................................................. 40 Figure 18: GVC3210 Wi-Fi Direct feature ................................................................................................... 41 Figure 19: GVC3210 Wi-Fi Advanced Settings page .................................................................................. 41 Figure 20: Wi-Fi Display feature ................................................................................................................. 42 Figure 21: Select display screen ................................................................................................................. 42 Figure 22: GVC3210 Bluetooth - Paired Device ......................................................................................... 44 Figure 23: GVC3210 Add VPN Files Screen .............................................................................................. 46 Figure 24: GVC3210 VPN Validation Screen .............................................................................................. 46 Figure 25: GVC3210 Camera Screen ......................................................................................................... 49 Figure 26: GVC3210 Add Preset Screen .................................................................................................... 50 Figure 27: Initial Position ............................................................................................................................. 51 Figure 28: GVC3210 Camera Parameters Setting Screen ......................................................................... 52 Figure 29: GVC3210 SIP Account ............................................................................................................... 55 Figure 30: GVC3210 Call Screen ............................................................................................................... 56 Figure 31: GVC3210 Single Incoming Call Screen ..................................................................................... 58 Figure 32: GVC3210 Single Incoming H.323 Call Screen .......................................................................... 59 Figure 33: FECC Remote Camera Control .............................................................................................. 61 Figure 34: GVC3210 3-Way IPVT Conference ........................................................................................... 63 Figure 35: GVC3210 Conference Control Screen ...................................................................................... 66 Figure 36: Select Video Feed ...................................................................................................................... 67 GVC3210 User Guide Version 1.0.1.13 P a g e |13 Figure 37: Layout Customization for multiple HDMI Outputs ...................................................................... 67 Figure 38: Choose HDMI Output ................................................................................................................ 68 Figure 39: GVC3210 3-Way Conference with Presentation ....................................................................... 68 Figure 40: Web UI Conference Recording .................................................................................................. 69 Figure 41: GVC3210 Call Details Screen ................................................................................................... 70 Figure 42: GVC3210 Participants List ......................................................................................................... 71 Figure 43: End Conference ......................................................................................................................... 72 Figure 44: Power Off During a Call ............................................................................................................. 72 Figure 45: GVC3210 IPVideoTalk Application ............................................................................................. 73 Figure 46: IPVideoTalk Application Enterprise Directory ........................................................................ 73 Figure 47: IPVideoTalk Application Enterprise Directory: Batch Call ..................................................... 74 Figure 48: IPVideoTalk ApplicationNotices .............................................................................................. 74 Figure 49: IPVideoTalk Application Notices: Message Prompt .............................................................. 75 Figure 50: Message Indicator for IPVideoTalk Application .......................................................................... 76 Figure 51: IPVideoTalk Account Settings .................................................................................................... 76 Figure 52: Busy Tone when the Callee is the Host of another Meeting ...................................................... 77 Figure 53: Busy Tone when the Callee is already a Meeting's Member ..................................................... 78 Figure 54: Manually Start Scheduled Meeting ............................................................................................ 78 Figure 55: Hand up - IPVideoTalk ............................................................................................................... 79 Figure 56: Participants list ........................................................................................................................... 79 Figure 57: Hand down - IPVideoTalk .......................................................................................................... 79 Figure 58: Hand down by Host - IPVideoTalk ............................................................................................. 79 Figure 59: Stop Camera Sharing ................................................................................................................ 80 Figure 60: Stop Video Uploading ................................................................................................................ 80 Figure 61 : Start Cloud Recording .............................................................................................................. 81 Figure 62 : IPVideoTalk Recordings ............................................................................................................ 81 Figure 63: GVC3210 Schedule Screen ....................................................................................................... 82 Figure 64: GVC3210 Conference Details Screen ....................................................................................... 83 Figure 65: GVC3210 Add Conference Screen ............................................................................................ 83 Figure 66: GVC3210 Voice Mail Application ............................................................................................... 86 Figure 67: GVC Remote apk in GVC3210 LCD Menu Settings Status Remote Control ............ 89 Figure 68: GVC3210 Remote Control Application on Android Device ........................................................ 90 Figure 69: GVC3210 Contacts Screen ....................................................................................................... 91 Figure 70: GVC3210 Add New Contact Screen .......................................................................................... 92 Figure 71: GVC3210 Import Contacts Screen ............................................................................................ 93 Figure 72: GVC3210 Download Contacts Screen ...................................................................................... 94 Figure 73: GVC3210 Export Contacts Screen ............................................................................................ 95 Figure 74: GVC3210 Groups Screen .......................................................................................................... 96 Figure 75: GVC3210 Add Group Screen .................................................................................................... 97 Figure 76: LDAP Contacts Interface ........................................................................................................... 98 Figure 77: LDAP Settings Example in Web UI .......................................................................................... 100 Figure 78: Search LDAP Contacts ............................................................................................................ 101 GVC3210 User Guide Version 1.0.1.13 P a g e |14 Figure 79: Add LDAP Search Result to Local Contacts ............................................................................ 101 Figure 80: Batch Add LDAP Search Results to Local Contacts ................................................................ 102 Figure 81: GVC3210 Call History Screen ................................................................................................. 102 Figure 82: GVC3210 Call History Details .................................................................................................. 103 Figure 83: GVC3210 Add Contact Screen ................................................................................................ 104 Figure 84: GVC3210 Recording Screen ................................................................................................... 106 Figure 85: GVC3210 Recording Settings .................................................................................................. 107 Figure 86: ApplicationsSetup Wizard .................................................................................................... 108 Figure 87: Interface Detection ................................................................................................................... 109 Figure 88: GVC3210 Backup App ............................................................................................................. 110 Figure 89: GVC3210 Automatic Backup Screen ........................................................................................111 Figure 90: Backup Commonly Used Apps .................................................................................................111 Figure 91: GVC3210 Restore Backup Data Screen ................................................................................. 112 Figure 92: GVC3210 Diagnosis Screen .................................................................................................... 113 Figure 93: LCD Menu Settings System Accounts ....................................................................... 114 Figure 94: Enable Calendar Sync for the Google Account ....................................................................... 114 Figure 95: GVC3210 Schedule Settings .............................................................................................. 115 Figure 96: Enable Google Account for Schedule and Set Sync Interval .................................................. 115 Figure 97: Creating New Event in Google Calendar ................................................................................. 116 Figure 98: Google Calendar Event Synced in Schedule .......................................................................... 116 Figure 99: Set Related Account to Google Account ............................................................................... 117 Figure 100: System Apps ..................................................................................................................... 118 Figure 101: Move App to SD card ............................................................................................................. 118 Figure 102: Move App to Device Storage ................................................................................................. 119 Figure 103: GVC3210 GS Market ............................................................................................................. 120 Figure 104: GVC3210 Web GUI - Login ................................................................................................... 122 Figure 105: GVC3210 Web UI Tool Bar .................................................................................................... 124 Figure 106: GVC3210 Web UI Call ........................................................................................................ 125 Figure 107: GVC3210 Web UI - Conference Status ................................................................................. 126 Figure 108: GVC3210 Web UI - Conference Control ................................................................................ 126 Figure 109: GVC3210 Web UI - Contacts ................................................................................................. 127 Figure 110: GVC3210 Web UI - Groups ................................................................................................... 128 Figure 111: GVC3210 Web Page - Schedule ............................................................................................ 129 Figure 112: GVC3210 Web UI - Call History ............................................................................................. 130 Figure 113: GVC3210 Web UI - Video Control ......................................................................................... 131 Figure 114: Factory Reset via LCD ........................................................................................................... 134 Figure 115: GVC3210 Web UI - Factory Reset ......................................................................................... 135 Figure 116: GVC3210 Web UI - Factory Reset Confirmation ................................................................... 135 GVC3210 User Guide Version 1.0.1.13 P a g e |15 DOCUMENT PURPOSE This User Guide describes the basic concept and tasks necessary to use and configure your GVC3210. This document covers the topics of device installation, making basic conference calls and using basic call features. To learn the advanced features and configurations, please visit http://www.grandstream.com/supportto download the latest "GVC3210 Administration Guide". This guide covers following topics:
Installing GVC3210 Product Overview Getting to know GVC3210 Connecting to Network and Devices Camera Peripheral Making Phone Calls Additional Functions Applications GS Market GVC3210 Web UI Features Factory Reset Experiencing GVC3210 IPVideoTalk Conference GVC3210 User Guide Version 1.0.1.13 P a g e |16 CHANGE LOG This section documents significant changes from previous versions of the GVC3210 user manuals. Only major new features or major document updates are listed here. Minor updates for corrections or editing are not documented here. Firmware Version 1.0.1.13 Added the option to check the Participants List on GVC3210 during an IPVideoTalk meeting. Users could check all participants in the current IPVideoTalk meeting. [Participants List]
Firmware Version 1.0.1.6 This is the initial version. GVC3210 User Guide Version 1.0.1.13 P a g e |17 WELCOME Thank you for purchasing GrandstreamGVC3210 AndroidTMVideo Conferencing System. This document introduces the LCD settings, web UI settings and advanced configurations of GVC3210. To learn the basic configuration and how to use GVC3210, please visit http://www.grandstream.com/support to download the latest "GVC3210 User Guide". GVC3210 is a ground-breaking solution that offers small-to-medium businesses a revolutionary video conferencing system with unprecedentedflexibility and the power of support for multiple popular video conferencing protocols and platforms right out of the box. The SIP-basedGVC3210 supports Grandstreams robust IPVideoTalk cloud platform for plug and play video conferencing. Additionally,since it is based on AndroidTM6.0.1, the GVC3210 offers full access to all video conferencing apps in the GoogleTM Play Store. The GVC3210 eliminates the traditional barriers to video conferencing and sets a new bar for business-class video conferencingsolutions by offering industry-leading flexibility, interoperability, system compatibility, application richness and ease of use. GVC3210 User Guide Version 1.0.1.13 P a g e |18 PRODUCT OVERVIEW Specification Protocols / Standards Camera Lens Network Interface Wi-Fi Bluetooth Video Outputs Video Input MIC/Speaker Remote Control Auxiliary Ports Voice Codecs Video Codecs Video Resolutions Content Resolutions
(Screen Sharing) Dual-Stream Audio Features Video Features Telephony Features Sample Applications Table 1: GVC3210Technical Specifications for G.711/a, G.722 (wide-band), Description SIP RFC3261, BFCP, TIP, RTP/RTCP, HTTP/HTTPS, ARP, ICMP, DNS (A record, SRV, NAPTR), DHCP, PPPoE, SSH, TFTP, NTP, STUN, LLDP-MED, LDAP, TR-069, 802.1x, TLS, SRTP, TCP/IP/UDP, IPv6, H.323 1/2.3, 16 Megapixel CMOS, 4K (2160p) Output 90field of view, ePTZ (3x digital zoom) 1 RJ45 10/ 100/ 1000 Mbps Integrated dual-band 802.11 a/b/g/n/ac (2.4GHz & 5GHz) Integrated Bluetooth 4.0 + EDR 2x HDMI 1.4 up to 4K (2160p) with CEC 1x HDMI 1.4 with resolution up to 1080p Built-in 4x MIC array Bluetooth and infrared remote control with multi-touch touchpad 2x USB 2.0, micro-SD, Reset Support iLBC, OPUS, G.722.1, G.722.1c, G729A/B, in-band and out-of-band DTMF (In audio, RFC2833, SIP INFO) HEVC(H.265) and H.264 BP/MP/HP, video resolution up to 4K (2160p), frame rate up to 30 fps, bitrateup to 16Mbps 4K (2160p@30fps) from 4096Kbps, 1080p@30fps from 1024Kbps, 720p@30fps from 512 Kbps, 4SIF/4CIF from 128 Kbps, SIF/CIF from 64 Kbps Input: VGA, SVGA, XGA, 1280600, WXGA, WXGA, SXGA, 1440900, XGA+, 720p, 16001200, 1080p(HDMI), up to 60fps Encoding: 800600, 1024768, 12801024, 1280720, 19201080 Output: 720p, 1080p BFCP, video resolution (up to 4K 2160p@30fps) + content resolution (up to 1080p@15fps) AEC, ANS, AGC, Noise Shield, PLC, CNG/VAD FEC, dynamic display layout, picture-in-picture, picture-outside-picture, digital caption Hold, forward (unconditional/no-answer/busy), downloadable phone book
(XML, LDAP), call waiting, call history, flexible dial plan, personalized music ringtones, server redundancy & fail-over Skype, Google Hangouts, Microsoft Lync, Web browser, Adobe Flash, Facebook, Twitter, YouTube,Google calendar, mobile phone data import/export via Bluetooth, etc. API/SDK available for advancedcustom GVC3210 User Guide Version 1.0.1.13 P a g e |19 Applications Deployment QoS Security Multi-language Upgrade/Provisioning Power & Green Energy Efficiency Package Content Temperature and Humidity Compliance CE approval application development Allow various Android operation system 6.0 compliant applications to be developed, downloaded andrun in the embedded device with provisioning control Layer 2 QoS (802.1Q, 802.1p) and Layer 3 (ToS, DiffServ, MPLS) QoS User and administrator level passwords, MD5 and MD5-sess based authentication, 256-bit AES encrypted configuration file, TLS, 128/256-bit SRTP, HTTPS, 802.1x media access control English, German, Italian, French, Spanish, Portuguese, Russian, Turkish, Polish, Chinese, Korean,Japanese, and more Firmware upgrade via TFTP / HTTP / HTTPS or local HTTP upload, mass provisioning using TR-069 or AES encrypted XML configuration file Input: 100~240VAC 50/60hz; output: 12V/2A 24W GVC3210 video conference system, remote control, 4 AAA batteries,universal power supply, network cable (1.5 meters), 2 HDMI cables (1.5-meter and 5-meter), lenscleaning cloth, mounting kit, quick installation guide, GPL license Operation: 0C to 40C, Storage: -10C to 60C, Humidity: 10% to 90% Non-condensing FCC: FCC Part 15B; FCC Part 15C; FCC Part 15E; UL 60950 (power adapter) CE: EN 55032; EN 55024; EN 61000-3-2; EN 61000-3-3; EN 60950-1; EN 301 489-1/17;EN 300 328; EN 301 893; EN 62311; EN 62479; RoHS RCM: AS/NZS CISPR 32/24; AS/NZS 60950.1; AS/NZS 4268;
ANATEL Output power:
GVC3210:
BT: 2.98dBm (BT 3.0), 6.05dBm (BT 4.0) 2.4G wifi: 16.58dBm (802.11 b), 17.23dBm (802.11 g), 16.84dBm (802.11 n20) 5G Wifi:
5150-5250 MHz: 802.11a: 17.66dBm; 802.11n-HT20: 17.19 dBm;
802.11n-HT40: 16.76dBm; 802.11ac20: 17.13dBm; 802.11ac40: 16.68 dBm;
802.11ac80: 16.58dBm;
5250-5350 MHz: 802.11a: 16.26dBm; 802.11n-HT20: 16.09 dBm;
802.11n-HT40: 16.22dBm; 802.11ac20: 16.01dBm; 802.11ac40: 16.31 dBm;
802.11ac80: 16.86dBm;
5470-5725 MHz: 802.11a: 16.18dBm; 802.11n-HT20: 15.77 dBm;
GVC3210 User Guide Version 1.0.1.13 P a g e |20 802.11n-HT40: 16.13dBm; 802.11ac20: 15.84dBm; 802.11ac40: 15.93 dBm;
802.11ac80: 16.59dBm;
GVC3210 RMT: 2.13dBm (BT) Safety Compliances GVC3210 complies with FCC/CE and various safety standards. GVC3210 power adapter is compliant with the UL standard. Use the universal power adapter provided with GVC3210 package only. The manufacturers warranty does not cover damages to the device caused by unsupported power adapters. Warranty If GVC3210 is purchased from a reseller, please contact the company where the device is purchased for replacement, repair or refund. If the device is purchased directly from Grandstream, please contact Grandstream Support for a RMA (Return Materials Authorization) number before the product is returned. Grandstream reserves the right to remedy warranty policy without prior notification. GVC3210 User Guide Version 1.0.1.13 P a g e |21 INSTALLINGGVC3210 Equipment Package Content Figure 1:GVC3210Package Content Table 2: GVC3210 Package List GVC3210 1x GVC3210Main Case 1x Remote Control 1x 12V Universal Power Supply 1x 1.5m Ethernet Cable 1x 1.5m HDMI Cable 1x 5m HDMI Cable 1x TV mount bracket (Plastic bracket) 2x screws 1x Lens Cleaning Cloth 1x Quick Installation Guide 1x GPL license 2x Bracket Sticking Strip 1x Wall mount bracket (Metal bracket) 4x AAA batteries GVC3210 User Guide Version 1.0.1.13 P a g e |22 ConnectingGVC3210 TOP VIEW 1 FRONT VIEW BOTTOM VIEW 2 3 4 Figure 2:GVC3210 Front/Top/Bottom Panel Table 3: GVC3210 Front Panel NO. Name Description 1 2 3 4 MicroSD Card Slot Insert microSD card to store call recordings and other necessary files. LED Indicator Camera Factory Reset Power on / Normal Running: Green Standby: Flash red Shutdown: Red Pressing any key on the remote control - Green light flashes once. 1/2.3, 16 Megapixel CMOS, 4K (2160p) Output When GVC3210 is powered up, use a small pin to press the button one time to reboot or for more than 10 seconds to restore to factory settings. GVC3210 User Guide Version 1.0.1.13 P a g e |23 1 2 3 4 5 Figure 3: GVC3210Right/Left Panel Table 4: GVC3210 Back Panel NO. Name Description Power Interface Network Interface Connect to power adapter. The arrow indicator on the power adapter should face upwards when the power adapter is plugged in. Connect to LAN port. USB Interfaces Connect to USB cable or external speakerphone. HDMI Input Interface Connect to HDMI input devices. 1 2 3 4 5 HDMI Output Interface Connect to HDMI display devices. Note:
There are 2 HDMI output ports. The interface marked with number
"1" is the primary interface to outputprimary video. Please make sure to follow the port order when connecting HDMI port 1 and 2. When there is only 1 HDMI output, it has to use HDMI output 1 and then HDMI port 2 if you have additional display devices. GVC3210 will not work correctly if connecting HDMI port 2 withoutHDMI port 1 connected. Please connect GVC3210 according to the following procedures:
1. Connect the LAN port of the GVC3210 to the RJ-45 socket of a hub/switch or a router (LAN side of the router) using the Ethernet cable. GVC3210 User Guide Version 1.0.1.13 P a g e |24 Note: The GVC3210 supports Wi-Fi as well. It can be used to connect the GVC3210 to the network. 2. Connect the HDMI [1] port of the GVC3210 to the HDMI port of the main display device (e.g., TV) using the HDMI cable. Connect HDMI port 2 if you have additional display devices. Note: Please make sure to follow the port order when connecting HDMI port 1 and 2. The GVC3210 will not work correctly if connecting HDMI port 2 without HDMI port 1 connected. 3. Connect the 12V DC output plug to the power jack on the GVC3210 and then plug the power adapter into an electrical outlet. 4. The LED Indicator in the front of the GVC3210 will show if the device is ready to be used by changing the color from red to green. Note: The display device (e.g., TV) will show the idle HOME screen with IP address on the top status bar as well. 5. 6. 7. Insert your microSD card into the microSD card slot. The recording files will be saved in Micro SD card.
(Optional) Connect presentation device (e.g., a laptop) to the GVC3210 HDMI IN port for presentation purpose during conference call.
(Optional) Connect USB accessory (e.g., mouse, keyboard, USB flash drive, ... etc) to the USB port.
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
For detailed instructions about installing GVC3210 on wall mount and TV/Monitor mount etc., please refer to the GVC3210 quick installation guide on www.grandstream.com.
--------------------------------------------------------------------------------------------------------------------------------------------
A sample of GVC3210 Right/Left panel connection is shown below:
GVC3210 User Guide Version 1.0.1.13 P a g e |25 Connect with the network cable Connect with HDMI Cable Connect with USB extension Connect with HDMI cable Figure 4: GVC3210Right/Left Panel Connection Diagram The following figure shows multiple GVC3210 devices deployed with other VoIP/network devices for video conference and collaboration. GVC3210 GVC3210 Figure 5: Deploy GVC3210 with other Devices GVC3210 User Guide Version 1.0.1.13 P a g e |26 GETTING TO KNOW GVC3210 Remote Control Remote Control Keys and Touchpad Figure 6: GVC3210 Remote Control Table 5: GVC3210 Remote Control Keys Key Name Description 1, 2, 3, 49 Digital Keys Input number 1-9 and letters. The letter input using digital keys will not be displayed as letter, but it can be used to search for contacts in Call interface. For example, typing 5 (JKL), 6 (MNO), 4 (GHI), 6 (MNO) can look for John if it exists in GVC3210 contacts list. GVC3210 User Guide Version 1.0.1.13 P a g e |27 Camera a PIP Mute/DN ND Presentat ion S Send/Answe Par rty into Con er/Add ference End d Call/Remo f from Confer ve Party rence Backspac ce N NavigationK Up p/Down/Left Keys:
t/Right S Switch to EP PTZ control m mode during a a call or in id dle status. S Switch scree en layout in c conference. Mute GV VC3210 in co onference. Press t whenGV the MUTE VC3210 is in key to ena idle. able/disable DND mod de Enable/D to all me Disable pres embers in the ction to send sentation func e conference e. d presentatio on Enable/D on displa as proje Disable pres ayed device ction when G entation func which is con GVC3210is i ction to show nnected to H n standby m w presentatio HDMI output ode. on 1 the dial scre en by defaul Access t mode. t when GVC C3210 isin idl e Enter ph hone number r and press t the key to dia al out. Access t the invite scr reen to add m members in a a conference e. Press th hekey to bring g out the bac ckstage conf ference. Press th he key to red ial the last o utgoing call. Delete m members in c conference. Hang up p the confere ence. P Press the key y to delete in nput characte ers. Press to o adjust curso or movemen nt. Control EPTZ movem ment in came era mode. OK Press to o confirm ope erations. p the soft ke eypad when Bring up box. the cursor is in an inpu ut L LCD prompt k key:
shows follo owing three optionsafter pressing th is Power On/
/Off Switch G GVC3210 int to sleep mod de. Power O Off G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |28 8 Reboot Input *
in input field
. Used as For exa s "." when di ample, 192.1 ialing direct I 68.40.5. P call. Start/sto op recording g in camera c control mode e. Start/sto op recording g in a call. Input "
"#" in input fie eld. Used a e.g., 1 as ":" when d 92.168.40.5 dialing direct
:5060. Input "
"#" on dialing g screen to u IP Call se it as RED DIAL key. Displa y call details s on call scre een during a c call. P Press each s s screen conte shortcut key ext. y for designa ated function s on differen nt P Press the key y to go back to home scr reen. P Press the key y to view mo ore options. P Press the ke c current scree ey to go bac en. ck to the pre evious scree en or exit th he T Turn down th he device vol lume. T Turn up the d device volum me. Z Zoom in scre een or adjust t close focus
. Z Zoom out scr reen or adjus st distant foc cus. Slide on n the trackpad d to move th e mouse cur rsor. Press th he trackpad t o confirm op perations. Using tw up/down wo fingers t n for page up to press on p/down. n the trackp ad and slid de G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |29 9
*/Record d
#/Details s S Shortcut Key y: Red Sh hortcut Key:
Yellow S hortcut Key y: Blue Home Menu Back Volume Do own Volume U Up Zoom In n Zoom Ou ut Track kpad Using th he Remote Control GVC321 automat to GVC3 10 remote c tically uses in 3210 via Blue control is c nfrared conn etooth. connected to ection when o GVC3210 the user rec via Blueto ceives GVC3 ooth or infra 3210 package ared connec e, then he m ction, and it t ay connect it t Before u of the re using the rem mote control, emote contro l. please make e sure that 4x x AAA batter ries are corre ectly installed d on the back k Infrared con Infrared sign keep the tw LED on the nnection:
nals are auto o devices in remote contr omatically us n front of eac rol is green w ed to connec ch other with when using in ct the remote hout any sub nfrared conn e control to G bstantial obs nection mode GVC3210. U truction in b e. Users need to o etween. The e 1. 2. h the GVC32 the same tim 210 anymore me for abou e (e.g., a fact t 4 seconds tory reset is m
. This will in made), press s nitiate pairing g Connection ot paired with e control is no 5 button at and number the remote c control. Bluetooth C If the remote OK button a process on t Note: The re GVC3210. emote contro ol needs to b be placed wi ithin the Blue etooth effect ive range, i.e e., 10m from m If the rem mote control fails to conn nect to GVC3 3210, please e follow the st teps below to o troublesho oot:
Che corr eck the batter ect direction ry polarity wh in the remot hen placed in te control. nto the batte ry case. Mak ke sure the b batteries are placed in the e Che Long eck the batter g pressingO ry power. OK button an nd number 5 5 button at t the same tim me for about 4 4 seconds. If GVC3 or conta 210 remote act the device control still d e provider. does not wor rk with the di agnosis abo ve, please tr ry another re emote contro l Capturi ing Screens shot using t the Remote e Control To captu at the GVC321 menuA ure a screens e same time 10. The Application shot on GVC e for about 3 users sFileMana ess the red s sers can pre C3210, the u hot picture wi he screensh seconds. T th a access he scree agerIntern nalStorage Pictures and blue shortcut key in the intern ill be saved in enshot n GVC32 Screenshot t. can e shortcutkey y al storage of f 210 LCD D Please n backgro remote c note that the und. If you w control and t e screenshot would like the hen press th captured he e image capt he blue shortc ere does not tured from ca cut key. have the im amera, you c age capture can press the d from the c e CAMERA b amera in the e button on the e G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |30 0 Using Mouse & Keyboard When the USB mouse is plugged into GVC3210, users could make the following operations with the mouse. Single click the left key of the USB mouse to perform the following operations:
Access menu. Check in the checkbox or enable/disable an option. Bring up the drop-down list when clicking on a combo box. Switch input methods in the input box, tap on the corresponding buttons on the soft keyboard to input characters. Double left clicks on the soft keyboard can switch to "Always use upper case" in English input method. Single click the right key of the USB mouse to exit the current displayed menu. It will go back to the previous menu without saving the configurations. Using theLED Indicator GVC3210 LED indicator is located right above the camera lens. It can be used to notify the users with current status of the device. Please refer to the status description below. Table 6: GVC3210 LED IndicatorStatus Descriptions LED Indicator Status Descriptions Solid Green Flash Green (per 0.5s) Flash Red (per 1s) Flash Red (per 0.2s) Flash Red (per 2s) Solid Blue Flash Blue (per 0.5s) Blue/Red Alternately OFF Booting or the device is already booted up Pressing any button on the remote control Rebooting Upgrading Factory Reset Temperature > 80 degree Camera connection failed Sleep mode Recording The device is in a call Pairing the remote control Aging test Power off GVC3210 User Guide Version 1.0.1.13 P a g e |31 Status s Icons GVC321 The use key on t 10 status ico ers can view he GVC rem ns are displa the top statu mote control o ayed on the us bar notific or pressing D right side of cation details DOWN button top status b s in drop-dow n when the G bar on GVC3 wn panel by GVC3210 is i 3210 LCD dis long-pressin in home scre splay device
. ng the MENU U een. F igure 7: GVC32 210Top Status Bar Dropdown n Menu For som It will na me notification avigate the us ns such as V sers to the co Voice Mail, th orresponding he users can g app. use the GVC C remote con ntrol trackpa d to select it
. The follo owing table li ists the main n status icons s used on GV VC3210. Table 7: GVC C3210Status Ic cons Descriptio ons Icon Descri ptions Icon Descript tions Icon Descript tions Missed Call Ethernet is c connected PPPoE is co onnected VLAN is suc configured ccessfully VPN is conn nected On ngoing call Et thernet is sconnected dis PPoE connec PP fa iled ction is LAN is being VL co onfigured VP PNconnectio on is failed Auto o answer is e enabled Tryi Ethe ng to connec ernet ct to the PPP PoEis discon nected Unre ead voicema ail Usin app ng thirdparty lications for m mixing calls G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |32 2 DN ND mode is e enabled Dow erro wnload or rea ors ad firmware Re emote contro onnected and co ol is d paired Rem conn motecontrol is nected and p s not paired US ins SB flash driv serted ve is Co ontacts stora age is full Spe eaker is being g used ro SD card s torage is Micr full W Wi-Fi is discon nnected Volu ume is turned d to silent Bluetooth is connected Remote con battery ntrol Low Micro SD Ca inserted ard is Call recordin is full ng storage Wi-Fi is con nected. Call forward d is set up Wi-Fi signa al strength Unk known Wi-Fi Wi-Fi-Displa ay is opened Using the Onscr reen Keyb board English h Keyboard This is the default keyboard o n GVC3210 0. The Englis sh keyboard d supports m multiple lang guages input t s. Users cou methods ld tap on to switc ch among dif fferent langu ages. See fig gure below. Figure 8: Soft Keyboard - En nglish Input Me ethod Tap on to sw witch Caps Lo ock:
G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |33 3 Figure 9: English Input Method Capslock Numbers and Symbols To input numbers and symbols, tap on button on the default keyboard to switch to numbers/symbols. Tap on for more numbers/symbols. Figure 10: Soft Keyboard - Symbols and Numbers Figure 11: Soft Keyboard - More Symbols and Numbers Home Screen GVC3210 Home screen displays the icons for users to easily access applications, camera, schedule, call, contacts, settings and custom applications. Press the Left/Right keys on the GVC3210 remote control to navigate. If there is no activity on main screen, the icons will be hidden and the video local loopback is displayed. Press OK button on the GVC3210 remote control to bring up the icons to display again. GVC3210 User Guide Version 1.0.1.13 P a g e |34 Figure 12: GVC3210 Home Screen Screen Lock The GVC3210 supports screen lock. When its enabled and configured, the user will be required to enter the lock code to unlock on the home screen. To use this feature:
1. On GVC3210 LCD menuSettingsSystemSecurity, select Screen Lock and set Screen Lock code. 2. Reboot, enter sleep mode or power off the GVC3210. 3. When the GVC3210 boots up again, a screen lock code will be required. The user can unlock the screen by entering the code using the GVC remote control. GVC3210 User Guide Version 1.0.1.13 P a g e |35 CONNECTING TO NETWORK AND DEVICES GVC3210 supports a variety of network connections (Ethernet, Wi-Fi) and device connections, including USB, Micro SD card and Bluetooth devices. When the GVC3210 boots up for the first time, a setup wizard will guide the users to pair and connect the remote control to GVC3210 and get started with the basic configurations. Ethernet If the user would like to use Ethernet connection for network access, please plug the Ethernet cable into the LAN port on the back of GVC3210. Ethernet connection is turned on as DHCP by default on both IPv4 and IPv6 protocols. To configure Ethernet settings on GVC3210, go to LCD menuSettingsNetworkEthernet. Figure 13: Ethernet Settings The GVC3210 offers the possibility toprioritize a protocol over another by setting Preferred Internet protocol to IPv4,IPv6, Both, prefer IPv4 or Both, prefer IPv6. GVC3210 User Guide Version 1.0.1.13 P a g e |36 Using IPv4 To configure the GVC3210 using IPv4 protocol, follow the below steps:
1. Plug the Ethernet cable into the LAN port on the back of GVC3210. 2. Go to LCD menuSettingsNetworkEthernetIPv4 Settings. 3. Tap on "Address Type" to select DHCP, Static IP or PPPoE as the address type. For DHCP, save the setting and GVC3210 should be able to get IP address from the DHCP server in the network. For static IP, enter IP Address, Subnet Mask, Default router, DNS Server 1 and DNS server 2 for GVC3210 to correctly connect to the network. For PPPoE, enter PPPoE account ID and password so that GVC3210 can get IP address from the PPPoE server. Using IPv6 To configure the GVC3210 using IPv6 protocol, follow the below steps:
1. Plug the Ethernet cable into the LAN port on the back of the GVC3210 2. Go to LCD menuSettingsNetworkEthernetIPv6 Settings. 3. Tap Address Type to select DHCP or Static IP as the address type. For DHCP, save the setting and GVC3210 should be able to get IP address from the DHCP server in the network. For static IP, configure IPv6 address, DNS server 1, DNS server 2 and Preferred DNS server, enter the IPv6 address in the format of 2001:db8:1:2::3. Note:
The same steps are applied in the case of using Both, prefer IPv4 and Both, prefer IPv6 and the user needs to configure the options of both protocols IPv4 and IPv6. GVC3210 User Guide Version 1.0.1.13 P a g e |37 WiFi Connecting to WiFi Network On the LCD display, go to SettingsNetworkWi-Fi to turn on and configure Wi-Fi. Figure 14: GVC3210 Add Wi-Fi Screen Once Wi-Fi is turned on, GVC3210 will automatically start the scanning within the range. A list of Wi-Fi networks will be displayed as scanning result. Tap on the SSID and enter the correct password information to connect to the selected Wi-Fi network. Follow the steps below for static IP usage under Wi-Fi environment:
1. Tap on one Wi-Fi network in the scanned Wi-Fi list to bring up the dialog that shows signal strength, security, password and option "Show advanced options". 2. Select "Show advanced options". The dialog will show additional option "IP settings". 3. In "IP settings", select Static IP, enter IP Address, Subnet Mask, and Defaultrouter for GVC3210 to correctly connect to the network. WiFi Protected Setup (WPS) In order to connect the GVC3210 to a secure Wireless Network without selecting the network name and entering the password, WPS can be used in two ways to perform this feature:
GVC3210 User Guide Version 1.0.1.13 P a g e |38 Push button WPS On the Wi-Fipage, press the MENU key on the remote control, and select "Push button WPS". Then, look on your Wi-Fi Router to see if it has a WPS button. Once the WPS button is found, press it to establish the connection with the GVC3210. Figure 15: GVC3210 Push button WPS feature PIN Entry WPS On the Wi-Fipage, press the MENU key on the remote control, and select "PIN Entry WPS".A PIN code will be generated by GVC3210 and the user will need to enter it and register it in the Wi-Fi Protected Setup page of the Wi-Fi Router. Figure 16: GVC3210 PIN Entry WPS feature GVC3210 User Guide Version 1.0.1.13 P a g e |39 Add Network The user can automatically connect the GVC3210 to the network using Wi-Fi by adding the network on your GVC3210. To do so, Please, refer to the following steps:
1. Go to the Wi-Fi page and press the MENU key 2. Enter the Network SSID. 3. Tap the security type that your network is using (None, WEP, WPA/WPA2 PSK, 802.1x EAP) 4. Enter the Password. 5. Click on Save. on the remote control,then select "Add Network"
Figure 17: GVC3210 Add network feature WiFi Direct The Wi-Fi Direct feature gives the ability to the user to connect the GVC3210 with another device supporting Wi-Fi direct as well with no requirement of the Wi-Fi Router, and it is generally used for file transfer between the two devices. At the same time, Wi-Fi Direct only works in 2.4G Wi-Fi mode. GVC3210 User Guide Version 1.0.1.13 P a g e |40 Figure 18: GVC3210 Wi-Fi Direct feature Advanced Settings On the Wi-Fipage, press the MENU key on the remote control, and select "Advanced Settings". In this page, the user can enable/disable Network Notifications and to set the Wi-Fi frequency band to Auto, 5GHz only or 2.4 GHz only. Figure 19: GVC3210 Wi-Fi Advanced Settings page GVC3210 User Guide Version 1.0.1.13 P a g e |41 WiFi Display Wi-Fi Display feature is used for screen stream mirroring of other devices in the GVC3210 via Wi-Fi. Please refer to the following steps to display your devices screen on the GVC3210 screen:
1. On the LCD display, go to SettingsNetworkWi-Fito turn on Wi-Fi. 2. Go to SettingsNetworkWi-Fi Display and enable Wi-Fi Display. Figure 20: Wi-Fi Display feature 3. On the device you want to cast its screen, go to Screen mirroring feature page and enable Wireless display. 4. The phone will show the GVC3210 in the devices list.Select the GVC3210. 5. On the GVC3210, select the display screen and the screen mirroring will start immediately. Figure 21: Select display screen GVC3210 User Guide Version 1.0.1.13 P a g e |42 Before c afterwar 1. On Blueto ooth On GVC receive f C3210, Bluet files to cellph ooth is enab hone, or use bled by defau Bluetooth sp ult. Users co peaker and e uld connect etc on GVC3 Bluetooth by 3210. y remote con ntrol, send or r Pairing g GVC3210w with a Bluet tooth Devic ce connecting G rds unless th GVC3210 wit ey are manu h other Blue ually unpaired etooth device d. To pair Blu e, users must uetooth devic t pair them f ce:
irst. They wi ll stay paired d the LCD dis play device, go to Settin ngsNetwor rkBluetoo oth. 2. Pre ess button n on the rem mote control a and select "S Search for de evices". 3. GV dev VC3210 scan vice shows u s and displa p in the resu ys the IDs of ult, tap on it to f all available o start pairin e Bluetooth d ng. devices in ra ange. Once t he Bluetooth h 4. Con dev nfirm the pas vice's docum sskey in the mentation or c prompted me contact with t essage (if an the device ad ny). Or,if pas dministrator sscode is req to obtain the quired, please e passcode. e refer to the e
-----------
-----------------
-----------------
N Note:
----------------
-----------------
-----------------
-----------------
-----------------
-----------------
-
ernal speake speaker via y before usin er provided w a Bluetooth c ng it for audio with GVC321 connection w o output. The exte external manually 10 is not pre-
with GVC3210
-paired to GV 0, the user m VC3210. If th must pair and he user wou d connect it ld like to use e to GVC3210 0 Connec cting to a Bl luetooth De evice After pai iring success sfully, the dev vice will be c connected to GVC3210 im mmediately. U Users will se ee this device e listed un
"Unpair"
nder "Paired
" and etc. Devices". Ta ap on n next to the co onnected dev vice. Users w will see option ns "Rename"
", G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |43 3 Figure 22: GV VC3210 Bluetoo oth - Paired De evice the If menuS reconne connection n lost NetworkBl SettingsN ect. is between uetooth and the Blueto d click on th ooth device he device na e and GV ame under P VC3210, go o to LCD D ces again to Paired devic o Using B Bluetooth R Remote Con trol Users co and con users to ould use GV nfigure a GVC pair and con VC3210 Blue C3210. Whe nnect the rem etooth remote en the GVC3 mote control e control tha 3210 boots u to the GVC3 at comes with up for the firs 3210. h the GVC32 st time, a se 210 packagi etup wizard w ng to contro l will guide the e When th LCD dis he remote co play device. ontrol is conn nected to GV VC3210, use ers will see icon on the top stat us bar of the e l is not paire 5 button at th ed with the G he same time GVC3210 an e for about 4 nymore (e.g. 4 seconds. T
, a factory re This will initiat eset is made te pairing pro e), press OK K ocess on the e control nee ds to be pl laced within the Blueto oth effective e range, i.e
., 10m from m If the re button a remote c Note: T GVC321 mote contro and number 5 control. The remote 10. If the us Connect er needs to p t a second re pair a differe emote contro ent remote co ol to GVC321 ontrol to GVC 10 and both r C3210, pleas remote contr se follow the rols can be u methods be used at the sa low:
ame time. 1. 2. 3. When remot for about 5 s Now both re
(Optional) If about 5 sec te control A is seconds on r emote contro you wish to conds to trig s paired and remote contr ls can be use use only one ger unpair p connected t rol B to trigge ed with GVC e remote con process on t to GVC3210 er pairing pro C3210. ntrol, Long p the remote c
, press OK +
ocess.
+ 5 keys at th he same time e press OK+0 k control. Or y keys at the s you can try t same time for r this, use the e G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |44 4 mote control t other conne to go to GV cted remote C3210 LCD
, then click o Settings on "Unpair"
Network to disconnec Bluetooth, ct and unpa Tap on ir it from the e
-----------
-----------------
----------------
-----------------
-----------------
-----------------
-----------------
-----------------
-
desired rem next to the o GVC3210.
-----------------
N Note:Please e use the pro oprietary facto ory remote c control that co omes with th he GVC3210 packaging.
-----------
-----------------
-----------------
----------------
-----------------
-----------------
-----------------
-----------------
-
-----------------
Transfe er Files with h Bluetooth h Users co and con receives LCDA ould transfer nnection. A p s the file tran Applications r files, share prompt for fil nsferring req sFileManag e contacts in e transferrin quest. Accep gerInterna formation wi g will be dis pt the reque alStorage ith other Blu splayed on G st to receive Bluetooth fo uetooth porta GVC3210 LC e the file an older. able devices CD display d d it will be s after pairing g evice whenit t stored under r Using B Bluetooth H Headset Once th calls.By e Bluetooth default, the headset is c ringing tone connected w will be gene with GVC321 erated in Blue 0, it will auto etooth heads omatically us set when ther se Bluetooth re is an inco h headset for r ming call. VPN Se ettings Users ca PSK, IPS 1. Acc an add VPN Sec Xauth R N using differ RSA and IPSe rent protoco ec Hybrid RS ls (PPTP, L2 SA). Follow t 2TP/IPSec P the steps bel PSK, L2TP/IP low to set up PSec RSA, p VPN:
cess GVC32 10home scre een, go to Ap pplications Settings NetworkV VPN. 2. Tap p on "Add VP PN file" to acc cess configu uration page as shown be elow:
G GVC3210 Use Version 1.0 er Guide 0.1.13 IPSec Xauth h P a g e |45 5 Figure 23: G GVC3210 Add V VPN Files Scre een 3. Fill add in and save ded. e the configu urations, go back to VP N page, you u will find th e new VPN file you just t p on the VPN N file to open 4. Tap the validatio on page as s hown below
:
Figure 24: G GVC3210 VPN V Validation Scre een 5. Fill in correct us sername and d password to o connect to VPN. If GVC3 3210 is conn co onnection is d isplays in the nected to V failed, a pro e top status b VPN success ompt box will bar, please c sfully, icon pop up to re check whethe will be emind users er if your VP shown in th whether to r N configurat he top statu reconnect to tion is correc ct. s bar; if the e VPN. If icon n G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |46 6 Table 8: GVC3210 VPN File Parameters Parameters Descriptions Name Type Fill in your company address or the server you are connecting to. Set to PPTP, L2TP/IPSec PSK, L2TP/IPSec RSA, IPSec Xauth PSK, IPSeXauth RSA or IPSec Hybrid RSA. Server Address Fill in the server URL or IP address. PPP Encryption
(MPPE) Show Advanced Options DNS Search Domains Defines whether to use PPP encryption. Check this option to display more options below. Enter DNS search domain. DNS Servers Enter DNS server address. Forwarding Routes Enter Forwarding Routes, for example, 10.0.0.0/8. VLANSettings Access GVC3210 home screen, go to ApplicationsSettingsNetworkAdditional Network SettingsVLAN to configure VLAN settings on GVC3210. Table 9: GVC3210 VLAN Configuration Parameters Parameters Descriptions Assigns the VLAN Tag of the Layer 2 QoS packets for LAN port. Default value is 0. Note:
Please do not change the setting before understanding the VLAN's settings or consulting with the network administrator. Otherwise, the device might not be able to get the correct IP address. Assigns the priority value of the Layer2 QoS packets. Default value is 0. Layer 2 QoS 802.1q/VLAN Tag Layer 2 QoS 802.1p Priority GVC3210 User Guide Version 1.0.1.13 P a g e |47 LLDP Settings Access GVC3210 home screen, go to ApplicationsSettingsNetworkAdditional Network SettingsLLDP to configure LLDP settings on GVC3210. Table 10: GVC3210 LLDP Configuration Parameters Parameters Descriptions LLDP Enable or disable LLDP. The default setting is disabled. Layer 3 QoS for SIP This field defines the layer 3 QoS parameter for SIP packets. It is the value used for IP Precedence, Diff-Serv or MPLS. The default value is 26. Layer 3 QoS for Audio This field defines the layer 3 QoS parameter for audio packets. It is the value used for IP Precedence, Diff-Serv or MPLS. The default value is 46. Layer 3 QoS for Video This field defines the layer 3 QoS parameter for video packets. It is the value used for IP Precedence, Diff-Serv or MPLS. The default value is 34. 802.1X Mode Access GVC3210 home screen, go to ApplicationsSettingsNetwork802.1x. By default, 802.1x is disabled. Selecting 802.1x mode to "EAP-MD5", "EAP-TLS" or "EAP-PEAP" to turn on 802.1x. Once it is enabled, the user will be required to enter the identity and password to be authenticated in the network. Table 11: 802.1x Mode Parameters on GVC3210 Parameters Descriptions 802.1x Mode Allows the user to enable/disable 802.1x and configure 802.1x mode. The default setting is disabled. Identity Enter the Identity information for 802.1x mode. 802.1x Password Enter the MD5 Password for 802.1x mode. CA Certificate Upload the CA certificate for 802.1x mode. Client Certificate Upload the CA certificate for 802.1x mode. Private Key Upload the private key for 802.1x mode. GVC3210 User Guide Version 1.0.1.13 P a g e |48 CAME ERA Users co screen. ould set pres There are 3 set, configur ways to acce re camera pa ess camera arameters, s screen:
start recordin ng and make e screenshot s on camera a Click k on icon on hom me screen. Pres ss key on the rem mote control. ect o on home scre een to access s Application ns,then click on
. 10 camera sc creen has th e following o options:
button on th hortcut button w shortcut bu e remote co n on the rem tton on the r ntrol to start ote control to remote contr or stop loca l recording. o edit preset
. ol to edit ima age paramet ters such as shortcut butto on the remote on on the rem e control to a mote control apply a pre-c for screensh configured pr hot. reset. Sele GVC321 Pres Pres Pres bala Pres Pres ss recording ss the red sh ss the yellow ance, etc. ss the blue s ss digit key o Figure 2 5: GVC3210 Ca amera Screen G GVC3210 Use Version 1.0 er Guide 0.1.13 scene, white e P a g e |49 9 Preset Add Preset Users can create and save maximum of 24 camera presets, with each preset storing the camera position and focal length. Follow the steps below to add preset:
1. Access camera screen and press the red shortcut key on the remote control to access preset screen. Figure 26: GVC3210 Add Preset Screen 2. Select the preset window and press the blue shortcut key on the remote control to access the editing screen. 3. Adjust camera position and zoom in/zoom out using the remote control. 4. On GVC3210 remote control, press "OK" key to save the preset, or press Back key to cancel. Edit Preset To edit an existing preset, press the blue shortcut key on the remote control to access the editing screen to edit. The created preset can also be renamed by pressing the yellow shortcut key on the remote control for better identification purpose. Delete Preset Access the preset editing screen, select preset and press the red shortcut key on GVC3210 remote control to delete it. GVC3210 User Guide Version 1.0.1.13 P a g e |50 Apply Preset If you have already set preset on camera, you can apply preset via one of the following two ways:
Access camera screen and press the digital keys on the remote control to adjust camera to the preset. Access preset screen and press the digital keys to switch to the corresponding preset, press the yellow shortcut key to apply. Initial Position Users can also define a preset as menuSettingsPeripheralCamera, three options are available:
initial position when the GVC3210 boots up fromLCD System default position: The GVC3210 will boot up at default camera position. Position when power off: The GVC3210 will return to the last position before power off. Custom: The GVC3210 will boot up at a custom position. When chosen, users will be redirected to Preset settings page to set a custom preset. Figure 27: Initial Position Camera Parameters Configurations Press the yellow shortcut key on GVC3210 remote control to bring out camera parameters setting screen as shown below. Refer to the table below and configure the parameters using navigation keys on the remote control. GVC3210 User Guide Version 1.0.1.13 P a g e |51 Figure 28: GVC3210 Camera Parameters Setting Screen Table 12: GVC3210 Camera Parameters Parameters Descriptions GVC3210 has 4 built-in modes as well as "Manual" for customization. When set to
"Manual", press "OK" key to access each setting toconfigurecontrast, saturation, and brightness. Picture Mode Contrast: Higher value brings more distinct color contrast. Saturation: Higher value brings deeper color. Brightness: Higher value brings brighter color. This is used to display accurate images. Users could set to "Manual" or "Auto". When set to "Auto", the device will adjust parameters automatically according White Balance to the current environment. When set to "Manual", the device will disable "Auto" mode. Press "OK" key to access manual setting screen, and adjust red or blue gain manually for better white balance. Users could set to "off", "low", "medium" or "high". Higher reduction level brings less image noises. Users could set to 50HZ or 60HZ. Denoise AC Frequency GVC3210 User Guide Version 1.0.1.13 P a g e |52 PERIPHERAL External USB Device GVC3210 USB interface could be connected with a USB mouse, a USB keyboard, or a USB storage device. UsingUSB Mouse/Keyboard When a USB mouse is plugged into GVC3210, users could see the cursor on the screen, move the cursor to perform operations. When a USB keyboard is plugged into GVC3210, users could use GVC3210 remote control to navigate to an input interface, and click on the keys on the keyboard to check if it is installed successfully. UsingUSB Storage Device To connect and access USB storage device:
1. 2. Insert USB storage device intone of theGVC3210 USB ports. It will take a few seconds for GVC3210 to prepare the connection. 3. Once it is installed successfully, the USB storage icon will show up on the status bar. Users could go to GVC3210 LCDApplicationsFileManagerUSB to access and manage your data. 4. Users could view, copy and paste files by using the USB storage device. Micro SD Card 1. 2. Insert your Micro SD card into Micro SD card slot at the back of GVC3210. Please make sure the Micro SD card is inserted with right direction on GVC3210. It will take a few seconds for GVC3210 to prepare the connection. Then, the Micro SD card icon will show up on the status bar. 3. To access the Micro SD Card, go to GVC3210 LCDApplicationsFileManagersdcard. Tap on it to access and manage your data.
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
The external Micro SD card must be plugged in if the users would like to record calls and the recording files will be automatically saved in the external Micro SD card. It is recommended to useaMicro SD card with GVC3210 User Guide Version 1.0.1.13 P a g e |53 largecapacity for call recording purpose.
--------------------------------------------------------------------------------------------------------------------------------------------
Microphone and Speaker GVC3210 is equipped with a built-in microphone.Alternatively, you can connect external audio devices to GVC3210 as audio input/output sources. If the external speaker supports Bluetooth, users could also pair and connect the speaker to the GVC3210 via Bluetooth. This will provide better mobility and make cabling easier when deploying the GVC3210 conference system in your conference room. from priority LCD MenuSettingsAudioAudioPriority, When there are multiple audio devices connected to the GVC3210, the users could configure the audio device web UIDeviceControlAudioControl: Audio Device. Please refer to more details in Audio Device section. from or GVC3210 User Guide Version 1.0.1.13 P a g e |54 MAK ING PHO ONE CAL LLS Accou nt 10comes wit account and to a SIP se sfully (accoun h one IPVide one BlueJe erver before nt icon is gree eoTalk acco eans accoun making call en). This dis unt, support nt.Please en s. The follow plays on the ts one config nable the IP wing figure s left side of th gurable SIP a PVideoTalk a shows the S he top status account regi account, or SIP account s bar on your stration, one e register SIP P is registered d r LCD display y GVC321 H.323 a account success device. Figure 29: GVC3210 S SIP Account Dial Sc creen Once th screen t e account is o start makin s registered s ng calls. successfully, users could d use one of the following g 3 ways to bring up dia l Pres ss the DIAL i icon in th he lower right t corner of th he remote co ntrol. On t the LCD disp play device, c click on icon on hom me screen. On t the LCD disp play device, c click on Appl lications and d select t to bring up d dial screen. Enter di GVC321 and 6 (
highlight gits in the d 10, a dropdo
(MNO) will d ted in red. dial-up box. I wn list of nu display 564 If the digits mbers will be 46 or john or the letters e displayed. if contact s for the dig For example
"john" exists git match con e, entering 5 s. The matc ntacts and c
(JKL), 6 (M ching charac call history in n NO), 4 (GHI)
) cters will be e G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |55 5 Pres call ss the red sh mode to Cal hortcut key o l or IP call. Figure on the GVC3 e 30: GVC3210 3210 remote Call Screen control to b ring up call m mode setting g screen, set t Pres ss the yellow w shortcut key y to set call t type to Audio o or Video. Pres acco ss the blue ount and Blu shortcut ke e Jeans acc y to switch ount. account am mong SIP ac ccount, H.32 23 account, IPVideoTalk k Click k on "Cance l" icon on the e screen, or press k key on the re emote contro ol to cancel th he call. Dialing g a Number Directly 1. Ope en the dial sc creen. 2. Use soft e the remote t keyboard. e control keyb board to ente er digits, or c click the inpu ut box to ente er digits usin g the popout t 3. Pre clic
-----------
on the ess ck it to dial ou
-----------------
remote cont ut.
-----------------
trol to dial ou ut, or move th he cursor to the icon on dia al screen and d
----------------
-----------------
-----------------
-----------------
-----------------
-----------------
-
Note:
1. By d optio default, GVC on "Use # as C3210 allows s Dial Key" in s users to pr n web GUI ress # key a SIPAccount as SEND key y. This beha tCallpage
. avior can be disabled via a 2. Whe the d
"6" (
exis
-----------
en entering in dropdown lis
(MNO), "9" (W ts in the con
-----------------
nitials or full st. For examp WXYZ) on th tact, users c
-----------------
spellings of ple, if the use he remote co can select it t
----------------
a name that er inputs Am ontrol, Amy's to dial out.
-----------------
t exists in the my by pressin name and n e contact, thi ng the corres number will b is contact wi ponding digi be displayed ll show up in n ts "2" (ABC)
, in the list if it t
-----------------
-----------------
-----------------
-----------------
-
Redial Users ca an dial out th he last dialed d number if th here is dialed d call log. Ac ccess the dia al screen, an nd then press s
"#" key o or on the e remote con ntrol to dial o out. Dialing gaNumber v via Contact Follow th he steps belo ow to dial a n number via C Contacts. 1. On 2. Nav the LCD dis vigate and se play device, elect in the c access Con contacts entr tacts by tapp ies using the on on ho ping on butto ntrol navigatio e remote con ome screen. on keys. G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |56 6 3. Pre ess on the e remote con ntrol to dial o out. Dialing g a Number via Call His story 1. On the LCD dis splay device, access App plications on the icon
. home screen n and access s call history y by selecting g 2. The cate e LCD will di egory. Selec splay all call ct the call his l history type tory entry yo es. Navigate ou would like in the call h to dial out. istory list by selecting th e call history y 3. Pre ess on th he remote co ontrol to dial out. Direct I IP Call P Call allows roxy. Direct I GVC3210 a P calls can b and another V be made if:
VoIP device to talk to ea ch other in a an ad-hoc fas shion without t h GVC3210 a h GVC3210 a and VoIP ph and VoIP ph one have pu hone are und ublic IP addre der the same esses, Or e LAN / VPN using private e or public IP
, P addresses T is disabled or GVC3210 0 NAT is disa abled. vices can be ng or DMZ). e connected t through a ro uter using pu ublic or priva ate IP addres sses (with ne ecessary port t e a direct IP call, please f follow the ste eps below:
cess the dial screen on G GVC3210 LC CD. 2. Pre
"IP ess the red sh Call". hortcut key o on the remote e control to b bring up call mode setting g screen, set t the mode to o 3. Inp 506 ut the target 62, input the t IP address. following: 19 For exampl 92*168*124*
e, if the targ 123#5062 get IP addres ss is 192.168 8.124.123 an nd the port is s The e * key repres sents the dot t (.) and the
# key repres sents the colo on (:). 4. Pre ess the yellow w shortcut ke ey on the rem mote control to select "Au udio Call" or
"Video Call". 5. Pre ess on the e remote con ntrol to dial o out. G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |57 7 Direct IP a SIP pr Both Both Or NAT Both dev forwardi To make 1. Acc Paging/Intercom Before placing paging/intercom, please make sure the callee has paging/intercom enabled so that it cananswer the paging/intercom call automatically. To make paging/intercom call:
1. Access the dial screen on GVC3210. 2. Enter the number to dial followed by *74. Please refer to Call Featuresfor more details. 3. Press the yellow shortcut key on the remote control to select "Audio Call" or "Video Call". 4. Press on the remote control to dial out. Answering a Call When the device is in idle and there is an incoming video callmade by SIP or IPVideoTalk account, the device will show the call screen as below:
Figure 31: GVC3210 Single Incoming Call Screen If the incoming video call is made by H.323 account, the call screen will display as bellow:
GVC3210 User Guide Version 1.0.1.13 P a g e |58 Figu ure 32: GVC32 10 Single Incom ming H.323 Ca all Screen Select "V the call w Video Answe with audio on er" or Pick u nly, or "Rejec p to answer ct" to reject t r the call with the call. h both video and audio, "A Audio Answe er" to answer r Call Ho old During a an active call
, press HOL D button to put the call on hold. On t the LCD disp play, click on On t the LCD disp play, click on to resu me the call. or press s on the e remote con ntrol to end th he call. If the cu rrent call is a a video call, t the screen w will not displa ay remote vid deo when the e call is on ho old. Mute L Local Aud dio During a an active cal ll, press the MUTE butto on to mut te the call, p press the but tton again to o unmute the e call. Call Re ecording During a Once re web UI an active cal ecorded, user Maintenan l, users coul rs can view t nceRecord d record the the recorded ding. For mo e video to the d video in Re ore details, pl e external M ecorder appli lease refer to icro SD card ication, and o the chapte to GVC3210 d plugged int
. download th e video from m r Recording g. 1. Dur ring an active e call, press the recordin ng key on n the remote e control. A re ed Rec icon G GVC3210 Use Version 1.0 er Guide 0.1.13 will show up p P a g e |59 9 on the upper lef ft of the scre en. 2. The e recording f files will be s saved to the configured s save path au utomatically w when the ca all is finished
. Use ers could als o press on the remo DND (
Do Not Di isturb) te control to stop recordi ng anytime. When D DND is on, th he incoming calls to GV VC3210 will b be blocked w without ringi ng. Users co ould see the e blocked bar on th calls in call he top of the history. Onc screen. ce it is enable ed, the DND D icon will b be displayed in the status s Whe en GVC3210 0 is in idle sc reen, users c can press button on t he remote co ontrol to turn n on/off DND
. Whe will n en GVC3210 not affect the 0 is in an act e current call tive call, use l, and it will ta rs could turn ake effect st n on/off DND arting from t D in call scree he next inco enMORE o ming call. options. This s At a page
-----------
any time, use e to turn on/t
-----------------
ers could log g in GVC321 D. turn off DND
-----------------
----------------
0 web UI an nd click on DND on the e top tool ba ar of the web b
-----------------
-----------------
-----------------
-----------------
-----------------
-
N Note:
After ena
-----------
abling DND
-----------------
mode during
-----------------
g a conferenc
----------------
ce, the DND
-----------------
mode will re
-----------------
emain effectiv
-----------------
ve after the c
-----------------
call is over.
-----------------
-
Missed d Call here is a mis ccessed the d ssed call, the dial screen, t e call icon the reminder on hom r icon will dis me screen w sappear. will show the number of m missed calls
. When th Once ac Call Fo orward ward (Uncond I and go to S ditional/No A SettingsSI Answer/Busy/
IPAccount
/Time Based Call. For de d)can be set etails, please up from web e refer to "GV b GUI.Log in VC3210 Adm GVC3210 ministration Call forw web GU Guide". Remot te Camera a Control in Call (F ECC) During th he video call
, if the local p party (GVC3 3210) and rem mote party su upport FECC C, the remote e camera can n G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |60 0 be controlled on the GVC3210. Here is how to use FECC on the GVC3210 to control remote partys camera:
1. Make sure the GVC3210 and the remote party support FECC and its enabled on both parties. For GVC3210, FECC setting is under web UISettingsAccountSettingsCodec: Enable FECC. If the remote party is another vendors video device, please check the documentation from the vendor to enable FECC. 2. Establish video call between GVC3210 and the remote party. 3. On the GVC3210 remote control, press the camera button and the following prompt pops up on GVC3210 display device. Figure 33: FECC Remote Camera Control 4. Use UP/DOWN/OK navigation keys on the GVC3210 remote control to select the remote party, e.g., GVC-LAB in the above figure. This will bring up camera control interface. 5. On the GVC3210 remote control, press the navigation keys and zoom in/zoom out buttons on trackpad to adjust remote camera. GVC3210 User Guide Version 1.0.1.13 P a g e |61 IPVID DEOTAL LK CONF FERENCE E Device e Layout GVC321 conferen Users ca plugging by defau 10 supportsI nces as a me IPVideoTalkc ember. conference anditcanbe the host to initiate a c conference o or join other r an connect t g in the two H ult while othe two HDMI ou HDMI display er devices au utput devices y devices. Th utomatically d s for confere he device co display the re ence. HDMI 1 nnected to H emote site. 1 interface is HDMI 1 interf s the primary face will disp y outputwhen n play local site e During a HOME s a conference screen, with t e, user can the conferen tap on b button on G nce video dis splayed in the GVC3210 rem mote control d. e background trackpad to o go back to o Initiat ting Confe erence ference can be initiated i in multiple w ways:
The con From m Call Scree Access the c en:
call screen, e 1. enter the num mber in the te ext box or se elect the mem mber from th he list below. 2. Press o on the remot e control or c click on butto on on the scre een to dial ou ut. From e:
m Schedule more details s, please refe For er to section Schedule. Answe ering an I ncoming Call in Co onference n specify ho 10 answers a ow your GVC a call automa C3210 hand atically or pro dles incomin ompts you to ng calls. Dep o answer a ca pending on all manually:
uration, your r your configu in GVC32 to-answer wh ideoTalk call 210 web G hen idle" opt to join a con GUI and go tion to "Yes"
nference, it w o to Setting
". All incomin will be answe gsIPVideo ng calls will b ered with vide oTalkAccou be answered eo as well. ntCallpag d automatica ge, and set t ally. If it is an n If "A or re Auto Answer w eject the call when idle" is using the re s set to No, emote contro users will ne l on the LCD eed to select D prompt. to answer w with video ma nually, audio o If the e conference e host answe ers the call, t the caller will l join into the e current activ ve conferenc ce. G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |62 2 You can GVC321 Log
"Aut IPVi Confer rence Man nagement t The follo owing figure shows a 3-w wayIPVT con ference:
Figure 34: G GVC32103-Way IPVT Conferen nce bottom of th tically hidden he call scree n if there is n en, users w no operation will see a list n in 5 secon t of icons fo ds. Press an or menu opt ny key to bri tions. This m ing up the m menu will be e menu options s On the automat again. Here are e the function ns for each ic con. Icons Na ame Definit tions Tabl le 13: GVC3210 0IPVT Call Scre een Bottom Me enu Icons Add M Member Rec cord Confe Con erence ntrol Access dia al screen and d add more n numbers to jo oin conferenc ce. Start/Stop recording f Control vid following o Local/Cloud iles will be sa deo and aud ptions for ea d recording aved to the c dio for confe ach party:
the ongoin connected Mi erence memb ng conferen icro SD card bers. It inclu ce. The or USB. udes the
- The selected par rty will not be e heard by ot ther parties.
- The selected par rty will not he ear other par rties. G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |63 3
- The If the sent in or video call wi e user clicks t to this party rder to see th th the select s on this icon y. The party h he video aga ted party will again, a vid has to accep ain. turn into aud eo invitation pt the video r dio call. will be request
- Suspe resu end video fro ume video. om the video party. Click on it again to o
- Pre event the GV VC3210 from uploading lo ocal video st treaming to IPVideoT Adjust the Talk server d layout for the during an IPV e video displ VT conferenc ay for video ce. call. The layout participants and whethe For examp HDMI outp options Av Pause/resu device will Turn on/off optionsmigh s are in the c er presentati ple, in a two-w ut connected verage, PO ume confere stop sending f presentatio nding on how ht vary depen ny HDMI out call, how man on or not. on is turned all on GVC32 way video ca d, after press sing Layout OP and PIP the confere ence. Once glocal video/
/audio to the n. w many video tputs are con o nnected 210 which ha icon, users as one will see ence is paus remote parti sed, the ies. HDMI IN m GVC3210, mode Auto must be plug after the use o or PC to gged in first. er selects P display pres When HDM Presentation sentation. I IN is plugg
, the user ca ged in to an select Presen The GV The oth display particip presen particip ntation Mod VC3210 that her participa y both presen pants do not ntation will pant can sho de: Auto t shares pre nts will recei ntation + vid t support BF only send ow presentati esentation wi ve two strea eo at the sa FCP, the GV presentatio ion. ill send dual ms and can me time. If t VC3210 that n stream a stream. select to he other t shares and the Presen The G presen particip ntation Mod de: PC hat shares th GVC3210 am, no ntation strea loc pants only se ee presentati presentatio cal video s ion. on will onl stream. Th ly send e other Lay yout Ho old Prese ntation G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |64 4 Bring up m more options. The options s include:
Call de Display video f loss ra receivi etails y call details frame rate, v ate, audio bit ng parties. such as vide video codec t rate and au eo packet los c, video reso udio codec fo ss rate, video olution, audio for both send o bit rate, o packet ding and Open D To ente Dial Keyboa er DTMF dur ard ring the call. Meetin Display ng info y all the infor rmation abou ut the call. End confer rence and go o back to hom me screen. Mo ore E nd If th cont e remote pa trol EPTZ de arty is also a evice for the r GVC3210, y you can pres y. remote party ss the camer ra key on the remo ote control to o Use notif rs could pre fications and ess the red/
/blue/yellow d view status
. shortcut key ys on the r emote contr rol to input DTMF, view w Duri be a prom ing an active a prompt bo mpt will be hi e conference ox on the lef idden autom e call, if there ft side of th atically if the e isan outgoi he conferenc ere is no new ing call failed ce screen sh w notification d or a memb ber hanging u howing notifi ications. The in 2 seconds s. up, there wil l e notification n On t calls the right side s, or whether e of the vide r if the call is e screen, us eo conferenc being muted d. sers can see e member sta atus such as s audio/video o Table 14: GVC3210 C Conference Me ember Status D Descriptions Icons s Desc criptions The current line i is in an audio o call. The current line i is in a video call. The current line i is being mute ed. The current line i is not connec cted. On t unst usin the upper lef table conditio ng the selecte ft side of the on, which m ed resolution video confer eans the cu n/bit rate. rence screen rrent networ n, users can k condition i see an icon s not good e to indi enough for th cate network k l he video cal G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |65 5 Invite Members s to Confe erence Users co ould use one e of the follow wing ways to o add membe ers:
Acce num auto ess the dial mber to dial omatically. screen by out. Once t clicking on he member the ADD ico answers th on on e call, it wil conference ll be connec screen. The cted into the en, enter the e e conference e Whe scre into en GVC3210 een. Then, e the conferen 0 is on confer nter the num nce automati rence screen mber to dial o ically. n, press on th out. Once th he remote he member a to acces contro l call, it will b answers the the cal ss l be connected d The conf member cal ference auto lls the confer omatically. rence numbe er. If the hos t answers th e call, the m member will b be added into o Confer rence Con ntrol Tap on conferen to mak nce control s ke operations screen is as s s such as m ute, disable shown below w:
sound, cam mera control and suspend d video. The e 1. Use e Up/Down n navigation ke eys on GVC3 3210 remote control to se elect confere Figure 35: GVC C3210 Confere ence Control Sc creen ncemember. 2. Use con e Left/Right nfirm the ope navigation k eration, press keys on GVC s "OK" key ag C3210 remot gain to cance te control to el,e.g.tap on make opera to mute ations, press one mem s"OK" key to o mber and the e icon n will turn to tap on itaga in to restore.
-----------
-----------------
-----------------
N Note:
----------------
-----------------
-----------------
-----------------
-----------------
-----------------
-
ould press th or suspend he shortcut ke videos. Users co block all eys on GVC3 3210 remote e control on c conference c control screen
, n to mute all G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |66 6 Pause Conference The video will be stopped if the conference is paused. You will not see the video view of the members and the other members will not see your video either.
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
The presentation will be displayed normally when the conference is paused.
--------------------------------------------------------------------------------------------------------------------------------------------
Custom PIP During a video conference, users can customize screen layout when using multiple connected HDMI outputs, to specify particular video feeds to be displayed on each screen. Under GVC CallscreenLayoutPIP, users can choose which video feed to be selected. Figure 36: Select Video Feed Once users choose Custom option, a window will show in order to customize the layout and the video feeds for each HDMI output. Figure 37: Layout Customization for multiple HDMI Outputs GVC3210 User Guide Version 1.0.1.13 P a g e |67 A selection window for the available monitors will pop up, in order to select which output will display the video streaming for the feed selected in previous step (In this example Local feed will be displayed on HDMI 1 Output Screen). Figure 38: Choose HDMI Output Presentation Sharing GVC3210 supports dual stream video, with the presentation sharing function, you can connect HDMI input devices such as a computer, or a DVD player to GVC3210, and share the HDMI input sources with remote parties while he can still view the local video. The following figure shows 3 TVs used for GVC3210. The one on the top shows presentation, the two on the bottom show remote party video. Figure 39: GVC32103-Way Conference with Presentation GVC3210 User Guide Version 1.0.1.13 P a g e |68
----------------
-----------------
-----------------
-----------------
-----------------
-----------------
-
-----------
-----------------
-----------------
N Note:
1. 2. When HDMI IN port. I IN interface e is connecte ed, GVC3210 0 will only di isplay the de evice connec cted to HDM I Users could also press P PIP button on GVC32 210 remote c control to cha ange video d display layout t. This will brin
-----------------
ng up the sam
-----------------
me options a
----------------
as pressing ic
-----------------
con on t
-----------------
he bottom m
-----------------
menu.
-----------------
-----------
-----------------
-
Confer rence Rec cording During presenta a video con ation shared nference, re by GVC321 ecording fea 0, or IPVideo ature is sup oTalk WebRT ported on t TC clients. the GVC321 10, including g video and d If Au uto presentat tion mode tu rns on, only the presenta ation is recor rded. If PC C presentatio on mode turn ns on, the pre esentation a nd local vide eo stream are e recorded. If pr esentation m mode turns of ff, dual video o streams are e recorded. conference, g can be don a new optio ne from GVC on of cloud C screen or W recording is Web UI as sh s added to a hown below:
allow users t to control re ecording, the e During c recordin Figure 40:
Web UI Confer rence Recordin ng G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |69 9 For more For more e details abo e details abo out local reco out cloud / IP ording, pleas PVideoTalk re se refer to Re ecording, ple ecording. ease refer to the chapterS Start Cloud Recording. 1. Pres reco ss ording. on the GVC32 210 remote 2. The recording fi les will be sa aved to the control or th he recording g icon o on bottom m menu to start t configured s save path au utomatically w when the ca ll is finished
. Use rs could also o press reco ording anytim me. o on the remo te control or r the recordin ng icon on bottom m menu to stop p
-----------
-----------------
-----------------
N Note:
It is stro recordin
-----------
ongly recom g purpose.
-----------------
mmended to
-----------------
----------------
-----------------
-----------------
-----------------
-----------------
-----------------
-
usea MicroS SD card or USB storag ge device wi ith largecapa acity for cal l
----------------
-----------------
-----------------
-----------------
-----------------
-----------------
-
Call De etails Users co ould view au udio and vide eo details of t the conferen nce members s. On the con nference scr reen, click on n and d select "Call Details" to c check the det tails. Figure 41:
GVC3210 Call l Details Scree n G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |70 0 Partic ipants Lis st Users co the parti ould check a icipants to ch all participan heck all mem ts in the cur mbers, the pa rrent IPVideo articipants ca oTalk meeting annot see all g. If the mee members in oes not allow eting host do w g. the meeting PVideoTalk cipants in the meeting, clic e current IPV then ck on More e eting, includi Videotalk mee n click on "P ng all partici articipants L pants with al List". GVC32 ll types of cli 10 will show w ents. During I all partic Figure 42 2: GVC3210 Pa articipants List Open D Dial Keyb board Users ca an send DTM MF during a c conference u using Open Dial Keyboa ard function. 1. On G Dial GVC3210 re Keyboard" o emote contro on the confer l, press the r rence screen red shortcut n to bring up key, or click the DTMF in on MORE b nput screen. utton s select "Open n 2. Pres ss the digital keys on the remote cont trol to input D DTMF. Press s locked meet ting with a P PIN Code by Note: Th the PIN he GVC3210 Code followe 0 can join a ed by #. End Co onference e tocancel the operatio on if needed. using Open n Dial Keybo oard to input t To end t Exit Co the conferen nference or nce, tap on E r End Confe END button rence. If GV or press VC3210 is the o on GVC3210 key e conference e host:
0 remote con ntrol to either r G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |71 1
- Se con we lect Exit co nference will b portal afte onference s still be goin rwards. so thatthe G ng on. The c GVC host w conference ca will leave th an be ended e conferenc d by WebRT ce itself whi C host or ad le the IPVT T dmin through h
- Se be lect End co disconnecte nference so ed from the IP o that the IPV PVT server. VT conferenc ce will be en ded and all t the other par rticipants wil l If the co in the co onference me onference wi ember hangs ll stay in the s up the call, it will be dis conference. sconnected fr rom the conf ference, but other parties s Figu ure 43: End Co onference Power r Off Durin ng a Confe erence Ca all During t user to e conferen choose he meeting, end the curre nce call and Reboot to e if the user pr ent conferenc power off the end the conf resses Powe ce and shutd e GVC3210 ference and r er ON/OFF b down GVC32 immediately, reboot the de button, a new 210 immedia
, or choose evice. w dialog will b ately. Choose Sleep to go be prompted e Power off o on sleep mo that allows to end the ode, or Figure 4 44: Power Off D During a Call IPVide eoTalk Ap pplication n IPVideoT view ent IPVideoT Talk applicat terprise direc Talk sett s an interfac tion provides ts, check and ctory contact Th he tings. user ce for the use d reply to no er to manage otices from IP access e this service PVideoTalk s IPVideoTalk e on the GV server as we applicat
, VC3210, e.g. ell as change e tion from m can LCDA Applications sIPVideoTa alk
. G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |72 2 Figure 45: GVC3210 IPVideoTalk Application Contacts The contacts are managed centrally in the server side. Users can access by selecting Contacts. Figure 46: IPVideoTalk ApplicationEnterprise Directory In Contacts, the users can view account status: online -
Users can also view Contacts types:
, offline -
. a. Group. b. Regular contacts with name, phone number, Email address etc. c. Public GVC3210 Device with an IPVideoTalk ID. Select an entry in the directory and press the Green Call button on the GVC3210 remote control to call this contact. GVC3210 User Guide Version 1.0.1.13 P a g e |73 Press the red shortcut key on the GVC3210 remote control to refresh the directory. Press the yellow shortcut key on the GVC3210 remote control to search contacts in the directory. Press the blue shortcut key on the GVC3210 remote control to select entries and make a batch call to multiple contacts in the directory. Figure 47: IPVideoTalk ApplicationEnterprise Directory: Batch Call Notices In the IPVideoTalk application, any incoming messages from the server side will be displayed in Notices. In the following figure, 2 indicates the number of new message and 3 indicates the number of total messages. Figure 48: IPVideoTalk ApplicationNotices GVC3210 User Guide Version 1.0.1.13 P a g e |74 Click on Notices to access the messages. Use the navigations keys/OK keys on the GVC3210 remote control to select and read the messages. For the messages that requires users reply, a prompt will pop up for the users to make a selection. Figure 49: IPVideoTalk ApplicationNotices: Message Prompt When IPVideoTalk plan is about to expire or already expired, a message will appear on the bottom of GVC3210 LCD home screen. Press yellow short key to view message details. Also, detailed information is on GVC3210 LCD menuApplicationsIPVideoTalkapplicationNotices. on the If there are new incoming messages for the IPVideoTalk account, users will see indicator icon top status bar. Also on the upper right corner of the IPVideoTalk application icon in Application menu, GVC3210 User Guide Version 1.0.1.13 P a g e |75 users will see the number of new messages displayed. Figure 50: Message Indicator for IPVideoTalk Application Settings In the IPVideoTalk application, click on Settings to configure Account Active and Display Name for the IPVideoTalk account on GVC3210. The users could also click on Device Code, Current plans, Business for more plan details. Besides, current IPVideoTalk version information will be shown under Application Information. Figure 51: IPVideoTalk Account Settings GVC3210 User Guide Version 1.0.1.13 P a g e |76 Join an IPVideoTalk Meeting Users can join an IPVideoTalk meeting by dialing the host GVC3210s IPVideoTalk ID or meeting ID. Please note only after meeting starts, GVC3210 can use this method to join the conference as a participant. Dialing host GVC3210s IPVideoTalk ID to join an active meeting Dialing meeting ID to join an active meeting. Busy Tone Responses Please note GVC3210 can only join one IPVideoTalk meeting at one time. Note that a specific busy response messages rather than SIP 486 busy error prompt on IPVideoTalk dialing interface when trying The number you dialed is hosting another meeting. Host GVC cannot be added as a participant of another IPVideoTalk meeting. Figure 52: Busy Tone when the Callee is the Host of another Meeting The number you dialed is joining another meeting. Participant GVC of an active IPVideoTalk meeting cannot be added to another meeting. GVC3210 User Guide Version 1.0.1.13 P a g e |77 Figure 53: Busy Tone when the Callee is already a Meeting's Member Manually Start IPVideoTalk Tip If a meeting is scheduled from IPVideoTalk Web Portal, then the meeting will sync to host GVC3210 device LCDSchedule interface. There will be a prompt message You are about to manually start a pre-scheduled meeting. If you start this meeting the original scheduled meeting date and time will be voided when pressing CALL button on remoter to start the meeting manually before or after scheduled time. Figure 54: Manually Start Scheduled Meeting For more information about your IPVideoTalk services, settings, how to manage accounts and schedule meetings, please check IPVideoTalk user manual from http://www.ipvideotalk.com Hand Down/Up in IPVideoTalk Meeting If GVC3210 joins an IPVideoTalk meeting as a participant and the host is any WebRTC client, the participant could click on button host thathe/she wants to be unmuted or needs any help. on GVC3210 LCDCall screen to raise hand to attract attention from GVC3210 User Guide Version 1.0.1.13 P a g e |78 Figure 55: Hand up -
IPVideoTalk The rais Client, a sed hand stat as shown in b tus of GVC32 below figure 210 participa ants could be e checked fro om Participan nts List on Ho ost WebRTC C Figu ure 56: Particip pants list The rais sed hand cou uld be put do own by partic ipant itself o r WebRTC h host. Participant G GVC3210 co uld hand dow wn itself by c clicking on bu utton Figure 5 57: Hand down
- IPVideoTalk WebRTC Ho ost could put t down GVC s hand. Figure 58: H and down by H Host - IPVideoT Talk G GVC3210 Use Version 1.0 er Guide 0.1.13 a again. P a g e |79 9 Stop Sh haringLocal l Camera WebRTC streamin C host can s ng to IPVideo stop the cam mera feed of oTalk Server
. a GVC atte endee to prev vent it from uploading its s local video o Stop Vi deo Upload dIcon Figure e 59: Stop Cam era Sharing Under G GVC3210 LC CDCall Sc reenConf f Control, us sers could p revent the G GVC3210 fro om uploading g deo streamin ants will not r ng to IPVide receive any v eoTalk serve video stream er during an ming from this n IPVideoTal s GVC3210, k meeting b and it will sw on by clicking o witch to 1-wa ay video. Other r local vid participa Figure 60: Stop Video o Uploading Start Cl loud Record ding webinar, a ne ew option is a added under r Call Screen n of host GVC C to allow During a users to To start/
screen, an IPVideoTa control clou
/stop cloud re or press alk meeting/w d recording. ecording, use shortcut ke ers could clic ey on remote ck on Recor e control:
rd button un der host GV C3210 LCD Call P a g e |80 0 G GVC3210 Use Version 1.0 er Guide 0.1.13 Figure 61 : Start Cloud Recording There will be an icon shown on the left upper corner of host GVC as well as all other participants to indicate the cloud recording is in progress, the screen and record button will also show as follow:
Users can at any time stop the recording by clicking the record button and press:
Users could log in to IPVideoTalk Enterprise web portal Recordings page to View/Download/Delete the recordings for the cloud meetings/webinars:
Note: There are some prerequisites to enable cloud recording features on GVC3210:
Figure 62 : IPVideoTalk Recordings GVC3210 needs to be linked with an IPVideoTalk enterprise account. The subscribed IPVideoTalk plan should include cloud recording support and adequate cloud storage space for recording. Please refer to IPVideoTalk website or User Manual for the latest plan information. Schedule Schedule feature allows users to set a specific time to host a conference in advance, with conference reminder and members. GVC3210 User Guide Version 1.0.1.13 P a g e |81 Figure 63 3: GVC3210 Sc hedule Screen n Follow o one of the wa ays below to access sche edule confere ence screen
:
On t the home scr reen, click on n CONFERE ENCE button On t the home scr reen, click on n APPLICAT TION button
. and se elect
. rs will see th ference entry he scheduled y to view det d conference ails. Use conf es (after the current time e) in the sche edule screen n. Select one e N Note:
Confere nces that ha ave been held d in the past will not be d displayed in t the schedule e screen. View Co onference D Details Users c press"O could view s K" key on GV scheduled c VC3210 rem conference d mote control t details after to view confe the current erence detail t time. Sele s. ect one con ference and d G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |82 2 Figure 64: GV C3210 Confere ence Details Sc creen Add Sch heduled Co nference Follow th he steps belo ow to add a scheduled co onference:
1. On 2. On the home sc GVC3210 re t to ac creen, select ol, press the emote contro ccess sched blue shortcu ule screen. ut key to crea ate a new con nference. Figure 65: GV VC3210 Add C onference Scr reen G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |83 3 3. Fill in conference name, members, start time, conference duration and etc. 4. Press the yellow shortcut key on the remote control to save the scheduled conference. Table 15: GVC3210 Add Conference Parameters Parameters Descriptions Related Account Choose the related account for the conference. Subject It is used to set the conference name to identify this conference. Members Start Time End Time Click onbutton to access the Add Member screen. Users can add one member or a group of members. Press the yellow key on the remote control to save and go back to schedulescreen. Up to 8 members can be added. It is used to configure the start time of the conference. It is used to configure the end time of the conference. Remind Time It is used to configure whether to remind users in advanced. A prompt dialog box will pop up on GVC3210 screen 10 minutes before the conference starts. Conference preset It is used to select a camera preset when the scheduled conference starts, the GVC3210s camera will be automatically placed to the preset position. Click on Conference preset and select Custom to be redirected to preset setting interface to configure and set a preset. Default is Not set. Users could selectrecurring for the scheduled conference, to repeat the conference depending on the chosen option. The recurring options are:
Recurring One-time event Daily Every Weekday (Mon-Fri) Weekly Monthly (by week) Monthly (by day) Yearly Custom Edit Scheduled Conference Follow the steps below to edit scheduled conference:
1. Access conference schedule screen and select the conference entry users would like to edit. 2. Press the yellowshortcut key on GVC3210 remote control to access edit screen. 3. Press the yellow shortcut key on the remote control to save changes, and go back to schedule screen. GVC3210 User Guide Version 1.0.1.13 P a g e |84 Resche dule Confer rence 1. Acc cess schedul le screen an d select the conference e entry users w would like to edit. 2. Pre ess the MENU U key on GVC3210 re emote contro ol, and select t "Reschedul e" option. 3. Set t new confere ence start tim me in the pop p out dialog b box. 4. Clic ck on SAVE on the remo button to sav ote control, or ve changes. r click on CA If users wou ANCEL button uld like to ca n on the scre ancel the cha een. anges, users s could press s Delete S Scheduled Conference e Follow th he steps belo ow to delete the existing scheduled c conference:
1. Acc cess schedul le screen an d select the conference e entry users w would like to delete. ess the MENU U key 2. Pre on Voicem mail the remote c control, and s select "Canc el". here is a new gin the web ail. w voicemail, v UISetting voice mail ic gsAccoun con will ntGeneralS show up as Settings to c a notification configure the n in the statu e access nu us bar. Users s mber for the e he steps belo ow to access s voicemail:
cess the dial screen and input voicem mail access n number. 2. Pre voic ess on GV cemail box. VC3210 remo ote control, o or click on b button on the ca all screen to dial into the e low the Inter ractive Voice e Response (
(IVR) for the message ret trieval proce ss. ould also go mber of new to Homescr w voicemail m reenApplic messages w cations and will be shown click on "Vo n on the voic ice Mail" to a ce mail app access the vo icon as wel oicemail box
. l. See figure e G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |85 5 When th could lo voicema Follow th 1. Acc 3. Fol Users co The num below:
Figure 66: GVC3210Voice Mail Application Call Features The GVC3210 support traditional and advanced telephony features including caller ID, caller ID with caller Name, call waiting, call forward and etc for the SIP account. Before using the following feature code, please make under web GUISettingsSIPCallpage. Please note this feature doesnt apply to IPVideoTalk account or BlueJeans account.
"Enable Call Features"
option
"Yes"
sure set to is Table 16: GVC3210Feature Code for SIP Account Use Preferred Codec (per call). Dial *01 followed by the preferred codec code and the phone number. The device will use this codec in the INVITE SDP as the first codec when initiating the
*01 call. Codec code:
PCMU: 7110 PCMA: 7111 G722: 722 G722.1: 7206 G.729AB:729 iLBC: 7201 For example, if the user would like to use PCMA as the preferred codec to call phone number 334455, enter *017111334455. Please note the actual codec being used might be GVC3210 User Guide Version 1.0.1.13 P a g e |86 different, which is the negotiation result between the endpoints and SIP server. Force Codec (per call). Dial *02 followed by the preferred codec code and the phone number. The device will be forced to use this codec during the call. Codec code:
PCMU: 7110 PCMA: 7111 G722: 722 G722.1: 7206 G.729AB:729 iLBC: 7201 For example, if the user would like to force using PCMA to call phone number 334455, enter *027111334455. Enable and force SRTP for all subsequent calls. Disable SRTP for all subsequent calls. Enable SRTP per call. Disable SRTP per call. Block Caller ID (for all subsequent calls). Dial *30. Send Caller ID (for all subsequent calls). Dial *31. Disable Call Waiting. Dial *50. Enable Call Waiting. Dial *51. Block Caller ID (per call). Dial *67 followed by the phone number. Send Caller ID (per call). Dial *82 followed by the phone number. Disable Call Waiting (per Call). Dial *70 followed by the phone number. Enable Call Waiting (per Call). Dial *71 followed by the phone number. Unconditional Call Forward. To set up unconditional call forward:
Dial *72 followed by the phone number to forward the call.
*02
*16
*17
*18
*19
*30
*31
*50
*51
*67
*82
*70
*71
*72 GVC3210 User Guide Version 1.0.1.13 P a g e |87
*73
*74
*83
*84
*90
*91
*92
*93 Cancel Unconditional Call Forward. To cancel the unconditional call forward:
Dial *73. Paging Call. Dial *74 followed by the phone number to send the paging call. Force Audio Calling (per call). Dial *83 followed by the phone number to send the audio call. Force Video Calling (per call). Dial *84 followed by the phone number to send the video call. Busy Call Forward. To set up busy call forward:
Dial *90 followed by the phone number to forward the call. Cancel Busy Call Forward. To cancel the busy call forward:
Dial *91. Enable Call Forward No Answer. To set up Call Forward No Answer:
Dial *92 followed by the number to forward the call. The default timeout before the call is forwarded is 20 seconds. Cancel Call Forward No Answer. To cancel Call Forward No Answer:
Dial *93. GVC3210 User Guide Version 1.0.1.13 P a g e |88 ADDITIONAL FUNCTIONS GVC Remote Client Application Besides using GVC3210Bluetooth remote control in the package, users could also download the Grandstream GVC Remote Client application, and install it on an Android device. GVC3210 remote control application is used via Bluetooth protocol. Follow the steps below to install the remote control application:
1. The GVC Remote LCD menuApplicationsFileManagerInternalStorageremotefirmware. Users could also directly send the apk file via Bluetooth to your Android device or use the QR code to download to your Android device. Please go to GVC3210 LCD menuSettingsStatusRemoteControlto send GVC Remote apk to Bluetooth device or scan the QR code. under GVC3210 for Android found apk can be Figure 67: GVC Remote apk in GVC3210 LCD MenuSettingsStatusRemote Control 2. Once GVC Remote app is installed on your Android device, open it and access settings screen. 3. Select the GVC3210 device that users would like to connect to. Eachdiscovered GVC3210 could be distinguished by the last 6 digits of its MAC address. 4. Pair GVC Remote app with GVC3210 via Bluetooth. Users might see prompt on GVC3210, and Android device to confirm the passcode during pairing and connection process. 5. After pairing and connecting the remote control application, users can use the keys and options on the Android device touch screen to control GVC3210. GVC3210 User Guide Version 1.0.1.13 P a g e |89 Figure 68
: GVC3210Rem mote Control A pplication on A e Android Device Tap on button Tap on button Tap on button at the uppe er right corne er to access settings scre een as the le eft figure sho ows above. to go back k to home sc creen as the f figure in the middle show ws above. to bring u up navigation n panel and digital keybo oard as the r right figure s hows above
, again n to hide the keyboard. tap o on BlueJe eans 10 has built-i n BlueJeans s access for u users to dial BlueJeans c calls. Follow the steps be elow:
the LCD dia m SIP Call to al screen, pre o BlueJeans ess the blue Call. shortcut key y on GVC321 10 remote co ontrol to swit ch call mode e 2. Wh hen the call m mode shows BlueJeans, i input Blue Je eans confere ence ID and c conference p password. ess on th he remote co ntrol or click on button on th he screen to dial out. e information ww.grandstre n about how eam.com/site to use BlueJ es/default/file Jeans on GV es/Resources VC3210, plea s/gvc320x_B ase refer to th BlueJeans_ap w:
he link below pplication_no ote.pdf GVC321 1. On from 3. Pre For more http://ww G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |90 0 APPL LICATIO NS GVC321 Users co 10 provides ould also dow built-in appli wnload the a ications such apps from GS h as Contac S market or G cts, Call Histo Google Play ory, File Ma Store to inst nager, Brow tall on GVC3 wser and etc
. 3210. Contac cts 10 Contacts a GVC321 Users ca an add conta server. app helps us acts on GVC sers to easily 3210 or impo y store and m ort contacts f manage phon from externa ne numbers a al devices as and contacts well as dow
. s information wnload from a a screen, click k on Contact ts icon
, or go to Ap pplications, a and select to access s C3210 home s app. On GVC contacts Figure 69 9: GVC3210 Co ontacts Screen All It is used to disp play all conta cts. Gro It is ups used to view w groups. Se lect one grou up to view gr roup details. Call l Sele cont ect the conta tact users wo act, and pres ould like to c ss all. on GV VC3210 rem mote control o or click on b Dele ete G GVC3210 Use Version 1.0 er Guide 0.1.13 utton to dial the e P a g e |91 1 Pres ss the red sh t Edit ss the yellow Pres hortcut key o n the remote e control to d elete contac cts. w shortcut key y on the rem mote control t o edit contac cts. d Add Pres ss the blue rmation and infor shortcut key press the ye y on the rem ellow shortcu mote contro t key on the l to access remote cont ct screen, f New Conta
. rol to save it ill in contact t Men Pres nu ss on th he remote co ontrol to acce ess menu to e edit/add/dele ete/export/im mport/downloa ad contacts. Con Sele s ntact Details ect one conta act and press s "OK" key o on the remote e control to v view contact details. Add Con ntact Add Sin ngle Contact t he steps belo ow to add on ne single con ntact:
Follow th 1. Pre ess the blue s shortcut key on GVC321 0 remote con ntrol to acce ss New Con tact screen. 2. Ent ter the conta ct informatio on. Figure 70: GV VC3210 Add Ne ew Contact Scr reen 3. Pre ess the red sh hortcut key t o add more f fields. ess the yellow w shortcut ke ey to save th 4. Pre e contact inf formation. Batch Im mport Conta acts Import fu saved to unction allow o the storage ws users to b e devices like batch import e Micro SD c contacts. Th ard/USB flas he phoneboo sh drive and k with compa plugged into atible format o GVC3210. t needs to be e G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |92 2 1. Pre ess the MENU U key on Co ontacts scree en, and selec ct "Import" to access Impo ort Contacts screen. Figure 71: GV VC3210 Import t Contacts Scr reen 2. Con nfigure param meters and s select the pa th to save th he imported f file. 3. Pre ess the yellow w shortcut ke ey to save th e contact inf formation. Table 17: GVC 3210 Import Co ontacts Param meters Param eters Descript tions Clear T The Old List t ce Duplicate Replac e s Entries If it is ena file is loa will be ke abled, the pr aded into the ept in GVC32 revious conta device. If it i 210. act records w is disabled, b will be delete both the old c d when a ne contacts and ew phoneboo d new contac ok cts If it is ena entries w be kept i the phonebo abled, when will be remove ed. If it is dis n GVC3210. ook file is imp sabled, both t ported to the the old conta e device, the acts and new duplicated w contacts wi ill File En ncoding Select th e encoding f format for XM ML contact fi le. Select th vcard for e file format rmat. for phonebo ook file impor rt. The device e supports x xml, csv and Select file e from storag ge device plu ugged into G GVC3210. File Ty ype Select The File Downlo oad Contact 10 supports at GVC3210 irectory for G downloading 0 looks for is GVC3210 to g phonebook
"phonebook retrieve. GV k from the fi
.xml". The ph VC3210 supp le server to honebook XM ports vcard/xm batch add c ML file should ml/csv file fo contacts. Th d be placed u rmat. e default file e under the file e GVC321 name th server d G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |93 3 1. On the Contacts screen, tap on the MENU key and select "Download" to bring up the Download Contacts screen. Figure 72: GVC3210 Download Contacts Screen 2. Configure parameters and select the path to save the file. 3. Press the red shortcut key to download the file. Table 18: GVC3210 Download Contacts Parameters Parameters Descriptions Clear The Old List Replace Duplicate Entries If it is enabled, the previous contact records will be deleted when a new phonebook file is loaded into the device. If it is disabled, both the old contacts and new contacts will be kept in GVC3210. If it is enabled, when the phonebook file is imported to GVC3210, the duplicated entries will be removed. If it is disabled, both the old contacts and new contacts will be kept in GVC3210. Download Mode Select the phonebook download mode from TFTP, HTTP or HTTPS. File Encoding Select the encoding format for the XML contact file. Time Intervals Configure the time interval to download XML contact file. HTTP/HTTPS Username HTTP/HTTPS Password Configure the HTTP/HTTPS username for phonebook downloading if its required by the server. Configure the HTTP/HTTPS password for phonebook downloading if its required by the server. Download Server Fill in the server URL or IP address to download the XML contact file to the device. GVC3210 User Guide Version 1.0.1.13 P a g e |94 Search Contacts In the Contacts app, users could input keyword to search in the dialog. GVC3210 will display contacts automatically which is related to the search keyword. Fuzzy search and precise search are both supported. Manage Contacts Delete Contact 1. Access Contacts screen and select the contact users would like to delete. 2. Tap on and select "Delete" option or press the red shortcut key in order to delete the contact. Batch Remove Contacts To delete more than one contacts, 1. Select "Batch Remove" option. 2. Select the checkbox for the contacts to be deleted, and press the red shortcut key on GVC3210 remote control to delete them.Users could also press the yellow shortcut key on the remote control to select all contacts at once. Export Contacts GVC3210 supports exporting phonebook as vcard/xml/csv files, and save the files to other external storage devices. 1. Press the MENU key on Contacts screen to bring up the Export Contacts screen. Figure 73: GVC3210 Export Contacts Screen 2. Configure parameters as shown in table below and select the directory to save the exported file. 3. Press the yellow shortcut key to export the file. GVC3210 User Guide Version 1.0.1.13 P a g e |95 Table 19: GVC3210 Export Contacts Parameters Parameters Descriptions File Encoding Select the encoding format for XML contact file. File Type Select the file format for phonebook file export. The device supports xml, csv and vcard. Choose Directory Select directory to save file. Groups Users could divide contacts into different groups with specific names. Select one group entry and press"OK" key to view group details. Call Figure 74: GVC3210 Groups Screen Press on GVC3210 remote control to call the first 8 members in a group to initiate a conference. Delete (red shortcut key) It is used to rename a group. Rename (yellow shortcut key) It is used to delete a group. New (blue shortcut key) It is used to add a group. GVC3210 User Guide Version 1.0.1.13 P a g e |96 Add New Group 1. Select Groupstabin Contacts screen. 2. Press the blue shortcut key on GVC3210 remote control to bring up the screen below:
Figure 75: GVC3210 Add Group Screen 3. Input a group name and tap on "OK" to add a new group. 4. Go to Contacts Screen to find the group you just added and access it. 5. Press the yellowshortcut key on the remote control to access Groups editing screen. 6. Select thecontactsusers would to add to this group. 7. Press the blue shortcut key on GVC3210 remote control to save the operations. Delete Group Follow the steps below to delete groups. 1. Select Groups on Contacts screen. 2. Select the group users would like to delete. 3. Press the redshortcut key to bring up the dialog box. 4. Press "OK" key to delete. GVC3210 User Guide Version 1.0.1.13 P a g e |97 LDAP contacts contacts LDAP display LCDApplicationsLDAPContacts. It helps users access and manage the contacts at ease. application GVC3210 accessed can be in device Here is the main interface of LDAP contacts. Figure 76: LDAP Contacts Interface LDAP Settings Before starting using LDAP on GVC3210, the users must configure the LDAP settings first. Press the Blue shortcut key on the GVC3210 remote control to access LDAP settings, or the users can configure it under GVC3210 web UIContactsLDAP page. Connection Mode Server Address Port Base DN User Name Table 20: GVC3210LDAP Settings Parameters It is used to select which protocol will be used for LDAP searching, LDAP or LDAPS. It is used to configure the URI of the LDAP (Lightweight Directory Access Protocol) server. It is used to configure the LDAP server port. The default LDAP port number is 389. It is used to configure the LDAP search base. This is the location in the directory where the search is requested to begin. Example:
dc=grandstream, dc=com ou=Boston, dc=grandstream, dc=com It is used to configure the bind "Username" for querying LDAP servers. Some LDAP servers allow anonymous binds in which case the setting can be left blank. GVC3210 User Guide Version 1.0.1.13 P a g e |98 Password LDAP Name Attributes LDAP Number Attributes LDAP Mail Attributes LDAP Name Filter LDAP Number Filter LDAP Mail Filter LDAP Displaying Name Attributes It is used to configure the bind "Password" for querying LDAP servers. The field can be left blank if the LDAP server allows anonymous binds. It is used to configure the "name" attributes of each record which are returned in the LDAP search result. This field allows the users to configure multiplespace separated name attributes. Example:
gn cn sn description It is used to configure the "number" attributes of each record which are returned in the LDAP search result. This field allows the users to configure multiple space separated number attributes. Example:
telephoneNumber telephoneNumber Mobile It is used to configure the "mail" attributes of each record which are returned inthe LDAP search result. Example:
mail It is used to configure the filter used for name lookups. Examples:
(|(cn=%)(sn=%)) returns all records which has the "cn" or "sn" field starting with the entered prefix;
(!(sn=%)) returns all the records which do not have the "sn" field starting with the entered prefix;
(&(cn=%) (telephoneNumber=*)) returns all the records with the "cn"
field starting with the entered prefix and "telephoneNumber" field set. It is used to configure the filter used for number lookups. Examples:
(|(telephoneNumber=%)(Mobile=%) returns all records which has the
"telephoneNumber" or "Mobile" field starting with the entered prefix;
(&(telephoneNumber=%) (cn=*)) returns all the records with the
"telephoneNumber" field starting with the entered prefix and "cn" field set. It is used to configure the filter used for mail lookups. Example:
(mail=%) It is used to configure the entry information to be shown on phone's LCD. Up to 3fields can be displayed. Example:
%cn %sn %telephoneNumber GVC3210 User Guide Version 1.0.1.13 P a g e |99 Max H Hits Search h Timeout (m ms) LDAP Lookup Wh hen Dialing h LDAP For Search Call Incoming It is used t the LDAP default se It is used t the reques seconds. It is used searching It is used searching to configure Pserver. If se tting is 50. to configure stand client w the maximum et to 0, serv m number of er will return f results to be n all search e returned by y results. The e the interval (
waits for serv
(in seconds) ver to return. for the serve
. The default er to process s t setting is 30 0 to set if al when makin d to set if for incoming low the pho ng outgoingc allow the p g calls. The d one system t calls. The def phone system default settin to do the LD fault setting i m to do LD ng is "No". DAP number r is "No". DAP number r Here is LDAP se an example erver in Gran configuratio ndstream UC n on GVC32 CM6xxx. 210 LDAP se ettings in we b UI. The LD DAP server i is the built-in n Figure 77: LD DAP Settings E Example in Web b UI G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |100 0 Search LDAPContacts After configuring LDAP settings, the users could search contacts in LDAP Contacts main interface. In the following example, the users could enter number or name in the Search field. The LDAP result will be displayed dynamically when the key word is entered. Figure 78: Search LDAP Contacts If the user presses the Green Call button call to this contact. Add Search Result into Local Contacts on the GVC3210 remote control, the GVC3210 will initiate a After performing LDAP search, the users could select to add the result into GVC3210 local contacts. Add to Local On the search result screen, move the selection to the contact, then press the red shortcut key on the GVC3210 remote control to add single search result to local contacts. Click on OK to confirm Add to Local. Figure 79: Add LDAP Search Result to Local Contacts GVC3210 User Guide Version 1.0.1.13 P a g e |101 Batc Pres sear prom ch Add ss the yellow rch results to mpt will pop u w shortcut ke o be added i up. Click on ey on the GV into local con OK to confirm ote control, t VC3210 remo ntacts. Press s the yellow d. m Batch Add then select t shortcut key the checkbox y again and x for multiple e the following g Figure 80: Batch Add d LDAP Search Results to Loc cal Contacts Call Hi istory Call His different tory provides t categories f s users acce for incoming ess to phone calls, outgoi e's recent ca ing calls, mis all records. U ssed call and iew all recor Users can vi d conference e. rds, or select t ss Call Histo ory, go to Ho me screen Application ns To acce
. Figure 81:
GVC3210 Call History Scree en G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |102 2 Click on GVC321 n a record in 10 remote co n the call his ontrol to view story and pr w call details f to d ress for this numb ial out this n ber. number dire ectly. Press "
"OK" key on n Figure 82:
GVC3210 Call l History Detail ls
-----------
-----------------
-----------------
N Note:
----------------
-----------------
-----------------
-----------------
-----------------
-----------------
-
Call hist directly, passwor
-----------
If an ent tory displays and there is rd has been
-----------------
s all Blue Jea no need to i changed, the
-----------------
ans conferen nput the pas e re-dial will
----------------
nce call histo ssword again fail.
-----------------
ories as well n. However, i l. Press "OK f the confere K" key or ence does no to dial out t ot exist or the e
-----------------
-----------------
-----------------
-----------------
-
try in call hist tory already e exists in GVC C3210 Conta acts, when th he user clicks s on the uppe er right Menu u button drop-dow on the wn list to view e Call Histo w the details ry screen, t s for this cont he users ca tact. an see and select View w contact o option in the e Add Con ntact from Call Histor y 1. Acc cess Call His story screen. 2. Sel ect one call history entry y. 3. Tap p on and d select "Add d contact" op ption to bring g up the dialo og box. 4. Con nfirm to add the contacts s. G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |103 3 Figure 83:
GVC3210 Add Contact Scree en 5. Sel scre ect existing een. contact or p press the blu ue shortcut key on GVC C3210 remot te control to o access edit t 6. Fill in contact in formation an nd press the yellow shortc cut key on th he remote co ontrol to save e the contact
. Delete C Call History y 1. Sele ect the call hi istory entry. 2. Pres ss the yellow w shortcut key y on GVC32 10 remote co ontrol to brin ng up the dia log box. 3. Con nfirm to delete e. Confere ence Sched ule via Call l History 1. Sel ect one call history entry y users would d like to add to scheduled d conference e. 2. Pre ess the blue s shortcut key on GVC321 0 remote con ntrol to acce ss schedule screen. 3. Fill in informatio on and press s the yellow s shortcut to sa ave. FileMa anager FileMan device s ager allows such as USB users to de flash drive a elete, move, and Micro SD copy, paste D card), and e, send, rena query file pr ame files (in operties on G ncluding files GVC3210. s on storage e G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |104 4 Copy File To copy the file from GVC3210 to USB/SD storage device:
1. Insert USB/SD storage device into USB port on GVC3210. It will take a few seconds for GVC3210 to prepare the connection. 2. The USB storage icon will show up on the status bar. 3. Go to Home screenApplicationsFileManager. 4. Open the target folder. 5. Press the yellow shortcut key and select the file. 6. Press the blue shortcut key to copy file and press to go back to the upper level directory. 7. Select target storage device and go to the directory where the file will be pasted to. 8. Press the yellow shortcut key to paste the file. Users can also select file and press the blue shortcut key to copy one single file or folder. Send File 1. Go to Home screenApplicationsFile Manager. 2. Open the target folder. 3. Press the yellow shortcut key and select the file. 4. Press MENU key on GVC3210 remote control and select "Send" option. 5. Select target location and press "OK" key on GVC3210 remote control to send file. If users need to send the file via Bluetooth, enable and connect Bluetooth device first. Otherwise, the interface will be redirected to the corresponding setting page to configure. Users can also select file and press the MENU key to send one single file or folder. Delete File 1. Go to Home screenApplicationsFile Manager. 2. Open the target folder. 3. Press the yellow shortcut key and select the file. 4. Press the red shortcut key. 5. A dialog will pop out for users to confirm whether to delete the file or not. 6. Press "OK" key to delete the file successfully. Users can also select file and press the red shortcut key to delete one single file or folder. GVC3210 User Guide Version 1.0.1.13 P a g e |105 Rename File 1. Go to Home screenApplicationsFile Manager. 2. Open the target folder. 3. Press the yellow shortcut key and select the file. 4. Press MENU key on GVC3210 remote control and select "Rename". 5. Input the new file name in the pop out dialog and press "OK" key to save. Press on GVC3210 remote control to cancel the operation. Recording GVC3210 recording application is used for the storage of call recording files in video conferencing. Users can play, export, lock/unlock, send, rename or delete these recordings and etc. The recording screen is as shown below:
Figure 84: GVC3210 Recording Screen Press "OK" key to play recording. Press the red shortcut key to delete the chosen recording file. Press the yellow shortcut key to export the recording files to the external storage device. Press the blue shortcut key to edit (select) recordings. Press the MENU key to make other operations to recording files like export, rename, and lock/unlock. GVC3210 User Guide Version 1.0.1.13 P a g e |106 Recording Settings Users can change the default save path for recording to internal storage, a plugged Micro SD card or USB storage device:
1. Go to Home screenApplicationsRecording. 2. Press the MENU key 3. Plug in external Micro SD card or USB storage device. 4. Press the yellow shortcut key to choose the path of the recordings (Micro SD Card or Flash USB). 5. Press the blue shortcut key to choose the preferred format of your recordings (mkv or mp4). on remote control and select Settings. Figure 85: GVC3210Recording Settings Note:
The locked files can't be deleted or overwritten, and cannot be shown in the third-party application, but can be viewed in GVC3210 video application. When the recording size exceeds 1.9G, the GVC3210 will create a new file automatically to continue recording.There will be a prompt to indicate the storage space is insufficient if the disk storage is full. Setup Wizard GVC3210 offers a Setup Wizard tool to guide users into configuring their units step by step, the setup from LCD wizard appears automatically at it can be accessed anytime factory reset, or GVC3210 User Guide Version 1.0.1.13 P a g e |107 menuApplicationsSetupWizard. Figure 86: ApplicationsSetup Wizard Users can follow the steps using the remote control to setup fields, skip, return, or confirm the action. Setup wizard tool is useful to lead users to check and configure the GVC3210 settings such as language, accounts, interface status and etc. GVC3210 User Guide Version 1.0.1.13 P a g e |108 Figur re 87: Interface e Detection Backu up Backup p Data GVC321 accesse
(if any) a 10Backup ap ed from Hom and backup o pplication is e screenA options. used to bac Applications ckup data o sBackup. or import bac The default ckup files to screen will l o restore dat list available ta. It can be e backup files s G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |109 9 Figure 88: GVC3210Backup App GVC3210 supports manual backup and automatic backup:
Press the red shortcut key on the remote control to create new backup manually. The user will select data and press the blue shortcut key to start backup. Press the yellow shortcut key on the remote control to access automatic backup.Then configure each parameter for automatic backup. GVC3210 User Guide Version 1.0.1.13 P a g e |110 Figure 89: GVC3210 Automatic Backup Screen Note: Users have also the option to choose which commonly used apps need to be backed up, such as contacts, call history. Figure 90: Backup Commonly Used Apps GVC3210 User Guide Version 1.0.1.13 P a g e |111 Restore Backup Data Select one backup data and press "OK" key to access restore screen, select data and press the blue shortcut key to restore the backup data. Figure 91: GVC3210 Restore Backup Data Screen Set Backup Path Press the MENU key and select "Settings" on backup screen to access settings screen, set backup path and go back to save automatically.
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
Insert Micro SD card or USB flash drive to the GVC3210 before configuring backup path.
--------------------------------------------------------------------------------------------------------------------------------------------
Diagnosis When troubleshooting GVC3210, users could go to GVC3210home screenApplicationsDiagnosis
. Tap on the option and follow the instructions on each function to perform Camera Test, Remote Control Key Test, Built-in Speaker Test and etc. During the test, users could press the BACK key or follow the prompt to exit the test. GVC3210 User Guide Version 1.0.1.13 P a g e |112 Figure 92
: GVC3210 Dia agnosis Screen n Brows ser Users co ould browse web page, v view news a and watch vid deo via the b built-in GVC 3210 Browse er. On home e screen, select Appli cationBro owser
. Slide e up or down n with slide g gesture to sc roll the scree en. Zoo m in/out the page via zoo om gesture. ss the MENU U key to open n the menu b bar for more operations. Pres Sync L Local Sche edule with h Google C Calendar The GVC The sett Calenda C3210 suppo tings in this ar from Play S orts schedule schedule ar Store to GVC e that can be e saved loca C3210, the lo e accessed in ally on GVC ocal schedule n LCD menu 3210. If the e can be syn Schedule user downlo nced up with e (see section oads and ins Google Cale n [Schedule])
). stalls Google e endar. Please f 1. Go t follow the ste eps below to set up Goog gle Calendar r sync with G GVC3210 sch hedule:
to GVC3210 LCD menu Applicatio onsGSMar rket, downlo oad and insta all Google Pla ay Store. G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |113 3 2. Sign in Google Play Store using your Google account. Download and install Google Calendar to GVC3210. 3. Open Google Calendar on GVC3210. Please update Google Play services if required by the device. 4. Once Google Calendar is successfully installed and opened on GVC3210, it should automatically sign in using the same Google account in step 2. 5. On GVC3210 LCD menuSettingsSystemAccountsGoogleAccount, select Google account
. Figure 93: LCD MenuSettingsSystemAccounts 6. Select the Google account under Google accounts. 7. Click on the checkbox for Calendar to enable calendar sync for this Google account. Figure 94: Enable Calendar Sync for the Google Account GVC3210 User Guide Version 1.0.1.13 P a g e |114 8. On GVC3210 LCD menuSchedule, click on the upper right MENU iconSettings. Figure 95: GVC3210 ScheduleSettings 9. Enable Google Calendar by selecting the checkbox for the Google account. Set the sync interval, e.g., Every 5 mins. Figure 96: Enable Google Account for Schedule and Set Sync Interval Now your GVC3210 has Google account successfully associated with schedule. The scheduled conference from GVC3210 or Google Calendar can sync with each other. Here is how to use it. GVC3210 User Guide Version 1.0.1.13 P a g e |115 To s schedule me eeting using g Google Ca alendar and then sync u up on GVC3 3210 schedu ule 1. When creati ng a new ev vent in Googl e Calendar, please enter r GVC in W Where optio n. 2. 3. Then enter format:Num Multiple me example, 10 meeting me ber<Email>
eting memb 000<test@gm embers in D
><Account>. ers need to mail.com><S Description o
. Number i o be separat SIP>;810000 option. The s required w ted by semi-
00<IPVideoT meeting me while the othe
-colon in En Talk>;1001 embers shou er two fields nglish input uld be in the e
. are optional method. For r F igure 97: Creat ting New Even nt in Google Ca alendar The new eve ent will be dis splayed in G GVC3210 sch hedule shortl y. Fig ure 98: Google e Calendar Eve ent Synced in S Schedule G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |116 6 To schedule meeting on GVC3210 and then sync up with Google Calendar On GVC3210 LCD idle screen (or web UIContacts)Schedule, select the Google account as the Related Account and fill up other details to schedule the conference using Google account. The created conference will be synced up in Google Calendar. Figure 99: Set Related Account to Google Account Custom App on Home Screen Users could add one app to the home screen for easy access. GVC3210 only supports custom one app on home screen. The new app will overwrite the older one. On the Home screen, click on "Custom Home App" and select one app. Press "OK" key to confirm. The system will go back to Home screen automatically and users could find the app has already been added. To remove or change the Custom Home App, go to LCD Home screenApplications. Click on and select the option to modify custom app. Users could de-select the existing custom app, or change to a different app. Move App to Micro SD Card The apps that are not built-in on GVC3210 can be moved to an external Micro SD card plugged to the GVC3210 from GVC3210 LCDSettingsSystemApps page. Users could check the apps list on the external Micro SD card by pressing the Blue shortcut key on the GVC3210s remote control. GVC3210 User Guide Version 1.0.1.13 P a g e |117 Figure 100: System Apps Choose the target app that needs to be moved to Micro SD card, it will show its detailed information, then Click on Move to SD card to make the change take effect. After configuration change, note that the moved app will not be listed anymore on GVC3210 device after the external Micro SD card is ejected. Figure 101: Move App to SD card To move the app back to the GVC3210 internal storage, users could click Move to device on the detailed information page for the app on GVC3210 LCDSettingsSystemApps page. GVC3210 User Guide Version 1.0.1.13 P a g e |118 Figure 102 2: Move App to Device Storag ge Uninst tall Appli cation The app screen plications (ex Applications xcept the sy s, click on ystem applic and select ations) on G t "Uninstall M GVC3210 ca Mode". Users an be uninst s will see the alled. Go to apps that ca o LCD Home e an be deleted d with icon. Select and c confirm the u uninstallation
. shown w Once do one, press on the remo ote control, o or press to o go back to normal mod e. G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |119 9 GS M ARKET GVC321 market a 10 provides a and install to access to ap GVC3210. ps directly vi a built-in GS S market. Use ers could dow wnload the a apps from the e Search h Apps On GVC category C3210 Home y, or input ke e screen, cl ey words and ick on Appl d click on SEA licationsG ARCH iconto GS Market o search the app. Users could view the apps by y Figure e 103: GVC3210 0GS Market Downl load and Install Ap pps Use rs could see e that if the ap pp has been installed or downloaded by pressing g the blue sho ortcut key. Pres ss MENU key y to view w the downloa aded apps a and installed apps. Use rs could pres ss the blue s shortcut key o on GVC3210 0 remote con ntrol to cance el download in process. The installing pro ocess will be e started auto omatically af fter download ding the app
. Go t to un to Installed s ninstall the d screen to vie downloaded a w the installe apps. ed apps, or p press the blu ue shortcut k key on the re emote contro l Updat te Apps GVC321 the netw 10 will detect work connec t to update a ction is norm automatically mal. Users c y if there is n can view the new version e relevant in available for nformation, a r the installed and update d apps when n apps on the e G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |120 0 Installed screen. GVC3210 User Guide Version 1.0.1.13 P a g e |121 GVC3210 WEB UI FEATURES GVC3210 embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow users to configure the application device through a Web browser such as Mozilla Firefox, Google ChromeTM, etc. Accessing GVC3210 Web GUI The IP address of the GVC3210 will show on the top status bar of the connected display device (e.g., TV) via HDMI. To access GVC3210 Web GUI:
1. Connect the computer to the same network as GVC3210. 2. Make sure GVC3210 is turned on and shows its IP address on the top status bar of the connected display device. 3. Open a Web browser on your computer. 4. Enter GVC3210s IP address in the address bar of the browser, e.g.: http://192.168.5.162. 5. Enter the administrators login and password to access the Web Configuration Menu. The default administrator username and password are admin and admin. The default end user username and password are user and 123. The user can select English or other languages in the drop-down menu of language. Figure 104: GVC3210 Web GUI - Login 6. Click Login to access the configurations in web UI. GVC3210 User Guide Version 1.0.1.13 P a g e |122 Saving Changes When changing any settings on the web UI, always submit them by pressing the Save button on the bottom of the page, and then clicking the Apply button on the top of the page to apply the configuration changes. For those options with icon the changes to take effect. Definitions next to it in the web page, users must reboot the GVC3210 for This section describes the options in the GVC3210 Web GUI. As mentioned in the previous section, you can log in as an administrator or a normal user. Call Users could initiate conference and control conference from Web GUI. Contacts Manage contacts and LDAP client configuration, schedule conference and manage call history. Device Control Device Control and Audio Control. Settings Account, Network Settings, Peripheral, Call Features, General Settings and Security Settings. Maintenance Upgrade, Recording, Time & Language, Troubleshooting and Reboot. Status Account Status, Peripheral Status, Network Status, System Info and Remote Control status. The following table shows the web pages accessible by end user and administrator. Table 21: GVC3210 Web Access User Type Username Default Password Normal User user 123 Accessible Web Pages Call Contacts Device Control Status Settings: Network Settings, Peripheral, Security Settings Maintenance: Recording, Time & Language, Troubleshooting, Reboot Administrator admin admin All pages GVC3210 User Guide Version 1.0.1.13 P a g e |123 Toolbar The web UI tool bar is on the upper right corner of the web UI page. Figure 105: GVC3210 Web UI Tool Bar DND Turn on/off DND mode. Once enabled, the DND text will turn into red in web UI. The LCD for GVC3210 display will shows DND indication on the top of the screen and all incoming calls will be rejected. Remote Control Click to bring up virtual remote control panel. English Select the display language for the web UI. Logout Log out from the web UI. Call Page GVC3210 Web UI call page is shown below. Users could make calls and initiate conference from Web UI. GVC3210 User Guide Version 1.0.1.13 P a g e |124 3 3 Figure 1 106: GVC3210 W Web UI Call Table 22: G Accounts Latest con Input Pho Dial out. Select cal Display al gs UI - Call Setting GVC3210 Web U E Explanation n Registration nference sch hedule inform ne Number mation l mode l call history. 1 2 Making g a Call NO. 1 2 3 4 5 6 Enter ph hone number r in input box x, and select call mode, ta ap on button history e entry in the lis st below and d click on to dial out. G GVC3210 Use Version 1.0 er Guide 0.1.13 4 5 6 to ddial out; or, se elect one cal l P a g e |125 5 Conference Control When making a new call, initiating a conference or receiving an incoming call, the conference screen will pop up as shown below. Conference members Mute Block Video Suspend Camera End call
(Cannot
(Cannot ON/OFF Control be hear heard) others) Pause uploading Conference Add Delete control Recording members members Open DTMF Call End details conference Figure 107: GVC3210 Web UI - Conference Status Click on the icon for Conference Control, users will see a list of control icons on the bottom which are also available in LCD call screen. Presentation Hold Layout ON/OFF Figure 108: GVC3210 Web UI - Conference Control GVC3210 User Guide Version 1.0.1.13 P a g e |126 Contac cts Page This pag ge lists Conta acts, Schedu ule, Call Histo ory and LDA AP Settings. Contact ts Users co viewed f ould search/a from LCD as add/delete/e s well. The we dit contacts o eb UI contac on web page cts page is as e. The operat s shown belo tions will be s ow. synchronized d and can be e Figure 109 9: GVC3210 We eb UI - Contact ts Click k on ne ext to the con ntact to dial t the contact. Click k on More t to open more e options suc ch as export
, import and download co ontact. Sele Con ect "Import"
ntacts for mo option and u ore details. users will fin d import scr reen on the right. Refer to chapterB Batch Import t Sele for m option and us ect "Export" o more details. sers will find export scree en on the righ ht. Refer to c chapter Expo ort Contacts s G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |127 7 Select "D Download" opt tion and users s will find dow wnload screen n on the right. Refer to chap pter Downloa ad Contactfo s. or more details k on Click save e. Click k on save e. k on the che Click Groups s and use rs will find A Add Contact s screen on the e right. Fill in n contact info ormation and d and use ers will find E Edit Contact screen on th he right. Edit t contact info ormation and d ckbox for D elete and us sers can sele ect the conta acts to delete e from GVC3 3210. When IP GVC321 PVideoTalk s 10 will dial on supports a sp nly the N fir pecific memb rst contacts i ber N of co ntacts who c n the group. can participa ate in the con nference, the e Figure 11 0: GVC3210 W Web UI - Groups s Click k on ne ext to the gro oup to call th e contacts in n the group. G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |128 8 Click exis k on ting contacts and use s and save. ers will find A Add Group s screen on th he right. Sele ect group me embers from m Click k on Click k on the che Schedu ule and user rs will find Ed dit Group scr reen on the r ight. Edit Gro oupinformatio
. on and save ckbox for D elete and us sers can sele ect the group ps to delete f from GVC32 10. Confere chapterS nce can be Schedulefor e scheduled, r more details edited and s for each op d deleted fro ption. om web UI. See figure Figure 111:
GVC3210 Web b Page - Schedu ule below. Ple ase refer to o Click conf k on figuring the s schedule. and use ers will find Add Sched dule screen on the righ ht. Click on Save after r Click k on the s Click schedule. k on the che and use rs will find E dit Schedule e screen on t the right. Clic ck on Save after editing g ckbox for D elete and us sers can sele ect the sched dules to dele ete from GVC C3210. ve the cursor ear for the us r to the sche ser to dial ou eduled confe ut immediate erence where ely. e the schedu uled time is Mov appe G GVC3210 Use Version 1.0 er Guide 0.1.13 displayed, ic con l wil P a g e |129 9 Call His story From we eb UI, users could also a ccess Call h istory, which h is synchron nized with the e call history from LCD. Figure 112:
GVC3210 Web b UI - Call Histo ory The call history deta ils will be dis splayed on th he right side when there is one entry selected. Us sers can also o move th he cursor to the call his story time to add this ca all to schedu ule by clickin ng on
, or dial out t ately by click ing on immedia
. LDAP This sec for more ction is the sa e details. ame as LDA AP settings u nder chapte r LDAP cont acts. Please e refer to LDA AP contacts s G GVC3210 Use Version 1.0 er Guide 0.1.13 P a g e |130 0 Device Control Page Video Control Users could add preset and manipulate EPTZ control on this page. Move the cursor to one configured preset to preview preset. Click one preset to apply the preset. Click the un-configured preset, and adjust via the EPTZ control panel on the right, then save the configurations. Selected but unconfigured preset Empty preset Preset that has been set before Use EPTZ Control direction keys to adjust camera Zoom In Zoom Out Figure 113: GVC3210 Web UI - Video Control GVC3210 User Guide Version 1.0.1.13 P a g e |131 Audio Control Parameters Echo Delay Ringtone Volume Media Volume Device Ringtone Notification Ringtone Table 23: GVC3210 Web UI - Audio Control Parameters Descriptions Configures the device's HDMI audio delay to match the audio latency of different TV sets. Users can slide left or right to adjust ringtone volume. 0 is the lowest value, 7 is the highest value. Users can slide left or right to adjust media volume. 0 is the lowest value, 15 is the highest value. Select device ringtone from the dropdown list. Select device notification ringtone from the dropdown list. Select the audio device that the GVC3210 will use for audio input and output during call or playing media. The options are Auto, Bluetooth, USB,HDMI, Built-in Speaker and Gooseneck Mic. Auto GVC3210 will automatically detect whether any USB, Bluetooth or HDMI devices are connected. If only one of them is connected, it will be used as the audio device. is the Bluetooth>USB>HDMI>Built-in Speaker>Gooseneck Mic. connected, priority three two are or If Bluetooth The Bluetooth audio device will be used for audio input and output. Audio Device USB The USB audio device will be used for audio input and output. HDMI The audio input comes from the built-in MIC in GVC3210 and the audio output comes from HDMI. Built-in Speaker The audio output comes from the built-in speaker in GVC3210 and the audio input comes from device with priority Bluetooth>USB>HDMI>Gooseneck Mic>Built-in Mic Gooseneck Mic The audio input comes from the connected Gooseneck MIC and the audio output comes from device with priority Bluetooth>USB>HDMI>Built-in speaker The default setting is "Auto". GVC3210 User Guide Version 1.0.1.13 P a g e |132 Using these settings, users can configure ring or tone frequencies based on parameters from the local telecom provider. By default, they are set to the North American standard. Frequencies should be configured with known values to avoid uncomfortable high pitch sounds. Syntax: f1=val, f2=val [,c=on1/off1[-on2/off2[-on3/off3]]];
(Frequencies are in Hz and cadence on and off are in 10ms) ON is the period of ringing ("On time" in ms) while OFF is the period of silence. In order to set a continuous ring, OFF should be zero. Otherwise, it will ring ON ms and a pause of OFF ms and then repeat the pattern. Up to three cadences are supported. Ring Back Tone:
Users can configure ring back tone which is the tone the caller will hear before the callee answers the call. The default value: f1=440@-19,f2=480@-19,c=2000/4000;
Busy Tone:
Users can configure busy tone which will be heard if the callee is busy or on DND. The default value: f1=480@-24,f2=620@-24,c=500/500;
Reorder Tone:
Users can configure reorder tone which will be heard when the call fails to be established such as wrong account number is dialed, or the call is timed out. The default value: f1=480@-24,f2=620@-24,c=250/250;
Confirmation Tone:
Users can configure confirmation tone which will be heard when the callee enables call recording function or when the SIP account fails to register. The default value:
f1=350@-11,f2=440@-11,c=100/100-100/100-100/100. Call Waiting Tone:
Users can configure call waiting tone when there is another incoming call during the call. The default value: f1=440@-13,c=300/2000-300/2000-0/0. This configures the call-waiting tone gain. By default, they are set to the North American standard. Users could select "Low", "Medium" or "High". The default setting is "Low". Configure the default ring cadence for the ring back tone. The default setting is c=2000/4000;
GVC3210 User Guide Version 1.0.1.13 P a g e |133 Call Progress Tones Call-Waiting Tone Gain Ring Cadence FACTORY RESET Users could reset GVC3210 to factory settings via the following ways: Reset via local GUI, via Web page, via the reset hole on the back panel of GVC3210. Factory reset will delete configuration info and syslog info.
--------------------------------------------------------------------------------------------------------------------------------------------
Warning:
1. Factory reset will erase all GVC3210 configuration information. Please back up all settings or print useful information before making the following operations. If users lose all parameters or records, Grandstream will not take responsibility for the damage or loss. 2. After factory reset, the remote control will not be paired to GVC3210 anymore. Once the device reboot after reset, the user needs only to press OK+5 on the remote control at the same time for 4 seconds in order to pair and connect the remote control to GVC3210.
--------------------------------------------------------------------------------------------------------------------------------------------
Resetvia LCD Go to GVC3210 LCD idle screenSettingsMaintenanceFactoryReset, click on the "Reset" button to bring up the prompt box as shown below. Click "OK" to reboot the device and restore factory settings. Figure 114: Factory Reset via LCD GVC3210 User Guide Version 1.0.1.13 P a g e |134 Resetvia WebUI 1. Log inGVC3210 Web UIMaintenanceUpgrade, the "Factory Reset" option is on the bottom of the page. Figure 115: GVC3210 Web UI - Factory Reset 2. Click the "Reset" button to bring up the prompt box as shown below. Click "OK" to reboot the device, and restore factory settings. Figure 116: GVC3210 Web UI - Factory Reset Confirmation Reset via Reset Hole There is a Reset hole on the bottom panel of GVC3210, use a small pin to hold against the Reset hole for more than 10 seconds to restore factory settings. GVC3210 User Guide Version 1.0.1.13 P a g e |135 EXPERIENCING GVC3210 Please visit our website: http://www.grandstream.com to receive the most up-to-date updates on firmware releases, additional features, FAQs, documentation and news on new products. We encourage you to browse our product related documentation, FAQs and User and Developer Forum for answers to your general questions. If you have purchased our products through a Grandstream Certified Partner or Reseller, please contact them directly for immediate support. Our technical support staff is trained and ready to answer all of your questions. Contact a technical support member or submit a trouble ticket online to receive in-depth support. Thank you again for purchasing Grandstream Video Conferencing System, it will be sure to bring convenience and color to both your business and personal life.
--------------------------------------------------------------------------------------------------------------------------------------------
* Android is a trademark of Google Inc.
* Skype and Skype for Business are Registered Trademarks of Microsoft Corporation. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
--------------------------------------------------------------------------------------------------------------------------------------------
GVC3210 User Guide Version 1.0.1.13 P a g e |136
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-02-26 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
2 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | ||
3 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
4 | JBP - Part 15 Class B Computing Device Peripheral |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 | Effective |
2018-02-26
|
||||
1 2 3 4 | Applicant's complete, legal business name |
Grandstream Networks, Inc.
|
||||
1 2 3 4 | FCC Registration Number (FRN) |
0020352431
|
||||
1 2 3 4 | Physical Address |
126 Brookline Ave, 3rd Floor
|
||||
1 2 3 4 |
Boston, Massachusetts 02215 USA
|
|||||
1 2 3 4 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 4 | TCB Application Email Address |
b******@baclcorp.com
|
||||
1 2 3 4 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 4 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 3 4 | Grantee Code |
YZZ
|
||||
1 2 3 4 | Equipment Product Code |
GVC3210
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 | Name |
N******** W********
|
||||
1 2 3 4 | Telephone Number |
1-617********
|
||||
1 2 3 4 | Fax Number |
1-617********
|
||||
1 2 3 4 |
N******@grandstream.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 3 4 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 3 4 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 4 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Video Conference System | ||||
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 | Purpose / Application is for | Original Equipment | ||||
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 2 3 4 | Grant Comments | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 3 4 | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. | |||||
1 2 3 4 | Output power listed is conducted. | |||||
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 | Firm Name |
Bay Area Compliance Laboratories Corp. (Shenzhen)
|
||||
1 2 3 4 | Name |
W****** W********
|
||||
1 2 3 4 | Telephone Number |
+86 (********
|
||||
1 2 3 4 |
q******@baclcorp.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | CC | 2412 | 2462 | 0.187 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | 38 CC | 5180 | 5240 | 0.0361 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | 38 CC ND | 5260 | 5320 | 0.0351 | |||||||||||||||||||||||||||||||||||
2 | 3 | 15E | 38 CC ND | 5500 | 5720 | 0.0376 | |||||||||||||||||||||||||||||||||||
2 | 4 | 15E | 38 CC | 5745 | 5825 | 0.0357 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0010000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15B | CC |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC