Manual 33505 Receiver GR-12S HoTT 33506 Receiver GR-12 HoTT Graupner GmbH & Co. KG Henriettenstrae 94 96 D-73230 Kirchheim/Teck Germany www.graupner.de nderungen sowie Liefermglichkeiten vorbehalten. Lieferung durch den Fachhandel. Bezugsquellen werden nachgewiesen. Fr Druckfehler kann keine Haftung bernommen werden. Speci cations and availability subject to change. Supplied through specialist model shops only. We will gladly inform you of your nearest supplier. We accept no liability for printing errors. Sous rserve de modi cations et de possibilit de livraison. Livraison uniquement au travers de maga-
sins spcialiss en modlisme. Nous pourrons vous communiquer ladresse de votre revendeur le plus proche. Nous ne sommes pas responsables dventuelles erreurs dimpression. Con riserva di variazione delle speci che e disponibilit del prodotto. Fornitura attraverso rivenditori specializzati.Saremmo lieti di potervi indicare il punto vendita pi vicino a voi. Si declina qualsiasi res-
ponsabilit per errori di stampa. HoTT 1.0 / March 2011 - EN V1.2 CONTENTS:
1. General Note .............................................................................................................. 01 2. Functions .................................................................................................................... 01 2.1. Binding ......................................................................................................................... 01 2.2. Binding Multiple Receivers .......................................................................................... 01 2.3. Fail-Safe Function ........................................................................................................ 02 3. Receiver ...................................................................................................................... 02 3.1. Connections ................................................................................................................. 02 3.2. Low Voltage Warning ................................................................................................... 02 3.3. Temperature Warning .................................................................................................. 03 4. Firmware Update ........................................................................................................ 03 4.1. Receiver ...................................................................................................................... 03 4.2. Update Procedure ........................................................................................................ 03 5. Declaration of Conformity ......................................................................................... 05 6. Warranty ..................................................................................................................... 07 GRAUPNER GmbH & Co. KG Postfach 1242 73230 Kirchheim/Teck www.graupner.de Manual V1.2 Revision: March 2011 Thank you for purchasing the Graupner HoTT 2.4 System Please read through this entire manual before you attempt the installation and usage of your Graupner HoTT 2.4 System!
These operating instructions are part of this product. They contains important notes to the operation and handling. Please take this into consideration when you pass on the product to third parties. Neglect of the operating instructions and the safety instructions lead to expiring the warranty. Graupner constantly work on the advancement of all remote control systems; changes of the scope of deli-
very in form, technology and equipment we must reserve ourselves therefore. Please have understanding for the fact that from data and illustrations of this operating instructions no requirements can be derived. Please keep these instructions for further reference!
1. GENERAL NOTE When switching on or adjusting the radio control system it is essential to keep the transmitter aerial at least 15 cm away from the receiver aerials at all times. If the transmitter aerial is too close to the receiver aerials, the receiver will be overloaded, causing the green LED starts ashing. The transmitter responds by emitting a beep once every second; the red LED also goes out. The radio control system is now in Fail-Safe mode. If this should occur, simply increase the distance between the aerials until the audible warning signal ceases, and the red LED on the transmitter lights up again; at the same time the green LED on the receiver should glow constantly. 2. FUNCTIONS 2.1. Binding When you wish to use the Graupner HoTT 2.4 GHz receiver with a particular transmitter, the rst step must always be to bind the unit to its Graupner HoTT 2.4 GHz RF module (transmitter). This binding procedure only needs to be carried out once for each combination of receiver and RF module. The units supplied in the set are already bound to each other at the factory, i.e. the binding procedure described in the following section only needs to be carried out when you wish to use an additional receiver. However, it can also be repeated at any time if required, e.g. after changing transmitters. When binding is required, this is the procedure:
Switch the transmitter and receiver on. However, if the green LED on the receiver continues to ash for longer than ten seconds, then the Locate the BIND / RANGE button on the back of the transmitter, and hold it pressed in while you press and hold the SET button on the receiver. Both LEDs on the back of the transmitter now glow constantly, and the green LED on the receiver ashes. If the green ashing LED on the receiver begins to glow permanently within about ten seconds, this indicates that the binding process is complete. You can now release both buttons, and your transmitter / receiver combination is ready for use. binding process has failed. If this should occur, repeat the whole procedure. 2.2. Binding multiple receivers in one model If required, it is also possible to bind multiple receivers to the transmitter for a particular model. The rst step is to bind each receiver individually using the procedure already described. When the system is in use, the receiver which is switched on rst is the Master receiver. Any telemetry sensors installed in the model must be connected to this unit, as only the Master receiver transmits sensor data using the downlink channel. The second and all further receivers operate in parallel with the Master receiver but in Slave mode, with the downlink channel switched off. The control functions can also be distributed amongst multiple receivers; this is carried out using the Channel Mapping function of the SMART-BOX (Order No. 33700). In the same way it is possible to as-
sign one control function to multiple receiver outputs; a typical example would be the use of two servos for each aileron instead of only one, etc. ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ 01 Manual Receiver GR-12 Graupner HoTT 2.4 Manual Receiver GR-12 Graupner HoTT 2.4 10 ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ 09 Manual Receiver GR-12 Graupner HoTT 2.4 2.3. Fail-Safe function In its default state (as delivered) the receiver is set to Hold mode, i.e. if a fail-safe situation occurs, all the servos connected to it maintain the last position detected as valid. In this mode the green LED on the receiver starts ashing when interference occurs, and the red LED on the transmitter goes out. The transmitter also starts beeping about once per second as an audible warning. You can exploit the safety potential of the fail-safe option by at least programming the throttle channel to respond to a fail-safe situation: the throttle channel of an engine-powered model should be set to idle, the throttle channel of an electric-powered model to stop, and the throttle channel of a model helicopter to Hold. If interference should occur, these settings will help prevent the model ying out of control, possibly causing personal injury or property damage. Please refer to the appropriate section in your RC system instructions for the procedure. 3. RECEIVER Telemetry socket
(channel 5) Servo sockets 3.1 Connections Plug the servos into the row of sockets on the right-hand end of the receiver. The connector system is polarised; note the small chamfer on one edge. Never use force - the plugs should engage easily and fully. The socket polarity is also marked on the case: brown wire (-), red (+) and orange (signal). The servo sockets of the Graupner-HoTT 2.4 receiver are numbered. The socket marked - +/B is intended for the battery. If necessary, a servo can be connected to this socket in parallel with the power supply; a Y-lead (Order No. 3936.11) is required for this. t is also possible to program channel 6 for the sum signal using the SMART-BOX (Order No. 33700). This is important for certain optional devices which require this signal. Power supply for receiver 33506 When using High Power servos, connect the receiver power supply/s preferably to the vertical ports of the receiver. If necessary, the servos can be connected to this sockets in parallel with the power supply;
a Y-lead (Order No. 3936.11) is required for this. When using a dual power supply, use the sockets on the outside:
Receiver 33506 (GR-12): Channel 1 and 6 (or 2 and 5) Channel 1 and 6 The socket marked 5 - channel 5 - is intended for the optional telemetry sensors and is used for loading rmware updates in conjunction with the USB interface. When using the receiver GR-12S (Order No. 33505) the adapter cable Order No. 23048 is also needed. Note: with telemetry sensors connected to socket 5, servos will not longer work at this output!
3.2. Low voltage warning If the receiver voltage falls below 3.8 V, the transmitters RF module generates a low voltage warning in the form of a general alarm sound: a steady beeping at intervals of about one second. Manual Receiver GR-12 Graupner HoTT 2.4 02 3.3. Temperature warning If the receiver temperature falls below -10 C or exceeds +70 C, the transmitters RF module generates a temperature warning in the form of a general alarm sound: a steady beeping at intervals of about one second. 4. FIRMWARE UPDATE GRAUPNER-HOTT 2.4 RECEIVER 33505 / 33506 Firmware updates for the transmitter RF module or receiver can be transferred via the DATA or telemetry interface in conjunction with a PC running Windows XP, Vista or 7. For this you also require the USB interface, Order No. 7168.6, and the adapter lead, Order No. 7168.6A, which are available separately. When using the receiver GR-12S (Order No. 33505) the adapter cable Order No. 23048 is also nee-
ded. The programs and les required for this are available from www.graupner.de in the Download area for the corresponding products. Install the Firmware Update Utility Graupner and the USB drivers on your computer. Check the system requirements!
The rst step is to cut through the central red wire in the adapter lead, Order No. 7168.6A, then connect the lead to the USB interface, Order No. 7168.6. This socket is also polarised; note the small chamfer on one edge. Never use force - the plug should engage easily and fully. 4.1. Receiver Receiver GR-12 (Order No. 33506):
Connect the adapter lead to the socket Channel 5 of the receiver, as shown in the illustration. This socket is also polarised; note the small chamfer on one edge. Never use force - the plug should engage easily and fully. The black wire (-) must be on top, the white wire (T) down. Receiver GR-12S (Order-No. 33505): the adapter cable Order No. 23048 is also needed. 4.2. Update procedure Ensure that the adapter lead is con gured as shown in the illustrations, and is connected correctly to the transmitter or receiver. Start the Graupner Firmware Update Utility. Under [COM Port Setup] select the correct COM port, i.e. the one to which the USB lead is connected. If you are not sure of this, press the button Search and select in the pop-up window Silicon Labs CP210x USB to UART Bridge and press OK. Baud Rate: 19200. Under [Interface Type] click on Signal 2:Vcc3:Gnd. Now click on the Browse button and select the folder con-
taining the previously loaded rmware le ending in *.bin. If everything is correct, the le will appear in the corresponding window. The rmware les are encoded in product-speci c form, i.e. if you accidentally select a le which does not match the product (e.g. transmitter update le instead of receiver le), then the pop-up window Product code error will appear, and you will not be able to start the update procedure. ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ 03 Manual Receiver GR-12 Graupner HoTT 2.4 Manual Receiver GR-12 Graupner HoTT 2.4 08 Wir gewhren auf dieses Erzeugnis eine / This product is / Sur ce produit nous accordons une Garantie von warrantied for garantie de 24 Monaten months mois Die Fa. Graupner GmbH & Co. KG, Henriettenstrae 94-96, 73230 Kirchheim/Teck gewhrt ab dem Kaufdatum auf dieses Produkt eine Garantie von 24 Monaten. Die Garan-
tie gilt nur fr die bereits beim Kauf des Produktes vorhan-
denen Material- oder Funktionsmngel. Schden, die auf Abntzung, berlastung, falsches Zubehr oder unsach-
geme Behandlung zurckzufhren sind, sind von der Garantie ausgeschlossen. Die gesetzlichen Rechte und Gewhrleistunsansprche des Verbrauchers werden durch diese Garantie nicht berhrt. Bitte berprfen Sie vor ei-
ner Reklamation oder Rcksendung das Produkt genau auf Mngel, da wir Ihnen bei Mngelfreiheit die entstan-
denen Unkosten in Rechnung stellen mssen. Graupner GmbH & Co. KG, Henriettenstrae 94-96, 73230 Kirchheim/Teck, Germany guarantees this product for a pe-
riod of 24 months from date of purchase. The guarantee applies only to such material or operational defects witch are present at the time of purchase of the product. Dama-
ge due to wear, overloading, incompetent handling or the use of incorrect accessories is not covered by the guaran-
tee. The users legal rights and claims under garantee are not affected by this guarantee. Please check the product carefully for defects before you are make a claim or send the item to us, since we are obliged to make a charge for our cost if the product is found to be free of faults. La socit Graupner GmbH & Co. KG, Henriettenstrae 94-96, 73230 Kirchheim/Teck, Allemagne, accorde sur ce produit une garantie de 24 mois partir de la date dachat. La garantie prend effet uniquement sur les vices de fonc-
tion-nement et de matriel du produit achet. Les dom-
mages ds de lusure, de la surcharge, de mauvais accessoires ou dune application inadapte, sont ex-
clus de la garantie. Cette garantie ne remet pas en cau-
se les droits et prtentions lgaux du consommateur. Avant toute rclamation et tout retour du prouit, veuillez s.v.p. cotrler et noter exactement les dfauts ou vices. Garantie-Urkunde Warranty certi cate / Certi cate de garantie 33505 Receiver GR-12S 33506 Receiverer GR-12 bergabedatum Date of purchase/delivery Date de remise Name des Kufers Owners name Nom de I`achateur Strae, Wohnort Complete adress Domicie et rue Servicestellen / Service / Service aprs-vente Graupner-Zentralservice Graupner GmbH & Co. KG Henriettenstrasse 94-96 D-73230 Kirchheim / Teck Servicehotline
(+49) 01805 47 28 76 Montag - Freitag 7:30 -11:45 und 12:30 -16:00 Uhr Belgie/Nederland Jan van Mouwerik Slot de Houvelaan 30 NL 3155 Maasland VT
(+31)10 59 13 59 4 Luxembourg Kit Flammang 129, route dArlon L 8009 Strassen
(+35) 23 12 23 2 Cesk Republika/Slovensk Republika RC Service Z. Hnizdil Letecka 666/22 CZ-16100 Praha 6 - Ruzyne
(+42) 2 33 31 30 95 Schweiz Graupner Service Schweiz CD-Electronics GmbH Kirchweg 18 CH-5614 Sarmenstorf
(+41) 56 66 71 49 1 Espana Anguera Hobbies C/Terrassa 14 E 43206 Reus (Tarragona)
(+34) 97 77 55 32 0 Sverige Baltechno Electronics P.O. Box 5307 S 40227 Gteborg
(+46) 31 70 73 00 0 UK Graupner Service UK Brunel Drive GB, NEWARK, Nottingham-
shire NG242EG
(+44) 16 36 61 05 39 France Graupner Service France Grard Altmayer 86, rue St. Antoine F 57601 Forbach-Oeting
(+33) 3 87 85 62 12 Italia GiMax Via Manzoni, no. 8 I 25064 Gussago
(+39) 30 25 22 73 2 Firmenstempel und Unterschrift des Einzelhndlers Stamp and signature of dealer Cachet de la rme et signature du detailant Press the Program button in the software. Wait brie y until you see movement in the progress bar. This make take up to ve seconds, depending on the computer. Receiver: press the SET button, and switch the receiver on while you hold it pressed in. After a few seconds the Status screen displays the message Found target device; you can now release the button, and the rmware update process commences. If the device is not recognised, if the pop-up window Target de-
vice ID not found appears, or if the process fails before 100%
is reached, you must restart the update procedure. Repeat all the steps as described above. The Status display and the Progress bar show the progress of the rmware update. The update is completed when the mes-
sage Complete100% or Complete!! appears. During the update process both LEDs on the transmitter glow constantly. When it is complete, the red LED goes out and you will hear a brief con rmation melody. The green LED on the receiver also light up; when the process is complete, the green LED starts ashing. Switch your transmitter / receiver off, and disconnect the ad-
apter lead. Caution: after completing an update process, you must initialise the device before using it, i.e. reset it to the factory default values. Initialisation:
Transmitter: To initialise the system, i.e. to reset it to the factory default settings, locate the BIND /
RANGE button on the back of the transmitter, hold it pressed in while you switch the transmitter on, then release the BIND / RANGE button again. Receiver: Press and hold the SET button on the receiver, switch it on, and release the SET button again. After about two or three seconds the green LED on the receiver lights up to con rm that your radio control system has been re-initialised. Please note:
The initialisation procedure erases ALL the settings you have entered. Where necessary, you will need to program your preferred settings again. When initialisation is complete, the transmitter will be in Fail-Safe set-up mode. You can therefore imme-
diately continue by programming your fail-safe settings. If you previously set your transmitters Country setting to France mode, you must also re-enter the Country setting. Please refer to the appropriate section in your RC system instructions for the procedure. Any settings you have entered using the SMART-BOX are also lost when you initialise the recei-
ver. If you carry out a receiver rmware update, you will need to re-enter these settings. 07 Manual Receiver GR-12 Graupner HoTT 2.4 Manual Receiver GR-12 Graupner HoTT 2.4 04 The latest version of these instructions can be found at www.graupner.de DECLARATION OF CONFORMITY ENVIRONNEMENTAL PROTECTION NOTES When this product comes to the end of its useful life, you must not dispose of it in the or-
dinary domestic waste. The correct method of disposal is to take it to your local collection point for recycling electrical and electronic equipment. The symbol shown here, which may be found on the product itself, in the operating instructions or on the packaging, indicates that this is the case. Individual markings indicate which materials can be recycled and re-used. You can make an important contribution to the protection of our common environment by re-using the product, recyc-
ling the basic materials or recycling redundant equipment in other ways. Remove batteries from your device and dispose of them at your local collection point for batteries. In case of R/C models, you have to remove electronic parts like servos, receiver, or speed controller from the product in question, and these parts must be disposed of with a corresponding collection point for electrical scrap. If you dont know the location of your nearest disposal centre, please enquire at your local council of-
ce. Konformittserklrung gem dem Gesetz ber Funkanlagen und Telekomunikationsendeinrichtungen (FTEG) und der Richtlinie 1999/5/EG (R&TTE) Declaration of Conformity in accordiance with the Radio and Telecomunikations Terminal Equipment Act (FTEG) and Directive 1999/5/EG (R&TTE) Graupner GmbH & Co. KG Henriettenstrae 94-96 D-73230 Kirchheim/Teck erklrt, dass das Produkt:
declares that the product mx-12 HoTT - No. 4754, mx-16 HoTT - No. 4755, GR-12S HoTT - No. 33505, GR-12 HoTT - No. 33506, GR-16 HoTT - No. 33508, GR-24 HoTT - No. 33512, GR-32 HoTT - No. 33516 Gerteklasse:
Equipment class 2 den grundlegenden Anforderungen des 3 und den brigen einschlgigen Bestimmungen des FTEG (Artikel 3 der R&TTE) entspricht. complies with the essential requirements of 3 and the other relevant provisions of the FTEG (Article 3 of the R&TTE Directive). Angewendete harmonisierte Normen:
Harmonised standards applied EN 60950:2006 Gesundheit und Sicherheit gem 3 (1) 1. (Artikel 3 (1)a)) Health and safety requirements pursuant to 3 (1) 1. (Article 3 (1) a)) EN 301 489-1 V1.7.1 EN 301 489-3 V1.4.1 Schutzanforderungen in Bezug auf elektromagnetische Vertrglichkeit 3 (1) 2, Artikel 3 (1) b)) Protection requirement concernig electromagnetic compatibility 3 (1) 2, Artikel 3 (1) b)) EN 300 328 V1.7.1 Manahmen zur effizienten Nutzung des Frequenzspektrums 3 (2) (Artikel 3 (2)) Measures for the efficient use of the radio frequency spectrum 3 (2) (Article 3 (2)) Kirchheim, 08. Dezember 2010 Stefan Graupner, Geschftsfhrer Stefan Graupner, Managing Director Graupner GmbH & Co. KG Henriettenstrae 94-96 D-73230 Kirchheim/Teck Germany Tel: 07021/722-0 EMail: info@graupner.de Fax: 07021/722-188 05 Manual Receiver GR-12 Graupner HoTT 2.4 Manual Receiver GR-12 Graupner HoTT 2.4 06