all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
140815007GZU 2ADAP-SAA1FB1F User Manual-1 Rev1 | Users Manual | 2.85 MiB | ||||
1 2 |
|
140815007GZU 2ADAP-SAA1FB1F User Manual-2 Rev1 | Users Manual | 3.54 MiB | ||||
1 2 | Test Report | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Operational Description | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Test Report |
1 2 | 140815007GZU 2ADAP-SAA1FB1F User Manual-1 Rev1 | Users Manual | 2.85 MiB |
Split Air Conditioner Models:
GWH09UC-D3DNA4A/I GWH12UC-D3DNA4A/I GWH18UC-D3DNA4A/I GWH09UC-D3DNA4C/I GWH12UC-D3DNA4C/I GWH18UC-D3DNA4C/I Thank you for choosing our product. For proper operation, please read and keep this manual carefully. If you have lost the Owners Manual, please contact the local agent or visit www.gree.com or sent email to global@gree.com.cn for electronic version. Specialties note Matching instructions This model adopts RF remote control. The remote controller shall be matched with the air conditioner before operation, otherwise the remote control will be invalid. Before operation, please read the instructions in this page carefully and then do the corresponding matching operation. Note Please do the following operation within 2m from the unit. Matching is not needed anymore once it is done. During matching, please keep the remote controller and air conditioner under standby status. When the signal of remote controller cant be received, please match the remote controller with the unit again. Matching of remote controller When the unit is under standby status, please get close to the air conditioner within 2m and then hold on pressing button for 3s. The remote controller and air conditioner will enter matching automatically. If matching is done, the unit will give out three sounds; if matching is failed, please get closer to the unit and arrange matching again. Humidify/Health Operation Notices Content Precautions............................................................................................................1 Parts name ........................................................................................................... 9 Screen Operation Guide Buttons on remote controller ................................................................................10 Introduction for icons on display screen ...............................................................10 Introduction for buttons on remote controller ...................................................... 11 Function introduction for combination buttons ......................................................17 Operation guide ....................................................................................................18 Replacement of batteries in remote controller ......................................................18
....................................... 19 Operation of Smart Control (Smart Phone, Tablet PC) Emergency operation ...........................................................................................27 Maintenance Clean and maintenance....................................................................................... 27 Malfunction Malfunction analysis ............................................................................................ 30 Installation Notice Installation dimension diagram ............................................................................ 34 Tools for installation ............................................................................................. 35 Selection of installation location .......................................................................... 35 Requirements for electric connection .................................................................. 36 Installation Installation of indoor unit...................................................................................... 37 Vacuum pumping ................................................................................................. 42 Leakage detection ............................................................................................... 42 Check after installation ........................................................................................ 43 Test and operation Test operation ...................................................................................................... 43 Attachment Configuration of connection pipe Pipe expanding method
......................................................................... 44
....................................................................................... 46 This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. Explanation of Symbols Indicates a hazardous situation that, if not avoided, will result in death or serious injury. Indicates a hazardous situation that, if not avoided, could result in death or serious injury. Indicates a hazardous situation that, if not avoided, may result in minor or moderate injury. Indicates important but not hazard-related information, used to indicate risk of property damage. Indicates a hazard that would be assigned a signal word WARNING or CAUTION. Precautions WARNING Operation and Maintenance This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Do not connect air conditioner to multi-purpose socket. Otherwise, it may cause fire hazard. Do disconnect power supply when cleaning air conditioner. Otherwise, it may cause electric shock. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Do not wash the air conditioner with water to avoid electric shock. Do not spray water on indoor unit. It may cause electric shock or malfunction. After removing the filter, do not touch fins to avoid injury. Do not use fire or hair dryer to dry the filter to avoid deformation or fire hazard. 1 Precautions WARNING Maintenance must be performed by qualified professionals. Otherwise, it may cause personal injury or damage. Do not repair air conditioner by yourself. It may cause electric shock or damage. Please contact dealer when you need to repair air conditioner. Do not extend fingers or objects into air inlet or air outlet. It may cause personal injury or damage. Do not block air outlet or air inlet. It may cause malfunction. Do not spill water on the remote controller, otherwise the remote controller may be broken. When below phenomenon occurs, please turn off air conditioner and disconnect power immediately, and then contact the dealer or qualified professionals for service. Power cord is overheating or damaged. Theres abnormal sound during operation. Circuit break trips off frequently. Air conditioner gives off burning smell. Indoor unit is leaking. If the air conditioner operates under abnormal conditions, it may cause malfunction, electric shock or fire hazard. When turning on or turning off the unit by emergency operation switch, please press this switch with an insulating object other than metal. Do not step on top panel of outdoor unit, or put heavy objects. It may cause damage or personal injury. 2 Precautions Attachment WARNING Installation must be performed by qualified professionals. Otherwise, it may cause personal injury or damage. Must follow the electric safety regulations when installing the unit. According to the local safety regulations, use qualified power supply circuit and circuit break. Do install the circuit break. If not, it may cause malfunction. An all-pole disconnection switch having a contact separation of at least 3mm in all poles should be connected in fixed wiring. Including an circuit break with suitable capacity, please note the following table.Air switch should be included magnet buckle and heating buckle function, it can protect the circuit-short and overload. Air Conditioner should be properly grounded. Incorrect grounding may cause electric shock. Don't use unqualified power cord. Make sure the power supply matches with the requirement of air conditioner.Unstable power supply or incorrect wiring or malfunction. Please install proper power supply cables before using the air conditioner. Properly connect the live wire, neutral wire and grounding wire of power socket. Be sure to cut off the power supply before proceeding any work related to electricity and safety. 3 Precautions WARNING Do not put through the power before finishing installation. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. The temperature of refrigerant circuit will be high, please keep the interconnection cable away from the copper tube. The appliance shall be installed in accordance with national wiring regulations. Installation must be performed in accordance with the requirement of NEC and CEC by authorized personnel only. The air conditioner is the first class electric appliance. It must be properly grounding with specialized grounding device by a professional. Please make sure it is always grounded effectively, otherwise it may cause electric shock. The yellow-green wire in air conditioner is grounding wire, which can't be used for other purposes. The grounding resistance should comply with national electric safety regulations. The appliance must be positioned so that the plug is accessible. All wires of indoor unit and outdoor unit should be connected by a professional. If the length of power connection wire is insufficient, please contact the supplier for a new one. Avoid extending the wire by yourself. 4 Precautions WARNING For the air conditioner with plug, the plug should be reachable after finishing installation. For the air conditioner without plug, an circuit break must be installed in the line. If you need to relocate the air conditioner to another place, only the qualified person can perform the work. Otherwise, it may cause personal injury or damage. Select a location which is out of reach for children and far away from animals or plants.If it is unavoidable, please add the fence for safety purpose. The indoor unit should be installed close to the wall. Instructions for installation and use of this product are provided by the manufacturer. FCC WARNING WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :
5 Precautions FCC STATEMENT
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 6 Precautions IC STATEMENT This device complies with Industry Canada licence-
exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with FCCs and ICs RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers must ensure that 20cm separation distance will be maintained between the device (excluding its handset) and users. Cet appareil est conforme aux limites dexposition au rayonnement RF stipules par la FCC et lIC pour une utilisation dans un environnement non contrl. Les 7 Precautions IC STATEMENT antennes utilises pour cet metteur doivent tre installes et doivent fonctionner au moins 20 cm de distance des utilisateurs et ne doivent pas tre places prs dautres antennes ou metteurs ou fonctionner avec ceux-ci. Les installateurs doivent sassurer quune distance de 20 cm spare lappareil ( lexception du combin) des utilisateurs. Working temperature range Indoor side DB/WB( ) Outdoor side DB/WB( ) Maximum cooling Maximum heating 26.7/19.4 26.7/-
46.1/23.9 23.9/18.3 NOTICE:
The operating temperature range (outdoor temperature) for cooling only unit is
-18 ~54 ; for heat pump unit is -30 ~ 54 . 8 Parts name Indoor Unit panel air inlet power wire filter horizontal louver remote controller air outlet display tem.display power NOTICE:
Actual product may be different from above graphics, please refer to actual products. 9 Buttons on remote controller 1 ON/OFF button 2 +/- button 3 Cool button 4 Heat button 5 Fan button 6 7 I FEEL button up down swing button 8 Mode button 9 Left right swing button 10 T-ON/T-OFF button 11 Clock button 12 13 Humidity button/Health button Air button 14 X-fan button 15 Light button 16 Sleep button 17 WIFI button 2 4 6 8 9 13 14 17 1 3 5 7 10 11 12 15 16 Introduction for icons on display screen Operation mode Auto mode Cool mode Dry mode Fan mode Heat mode Set time Turbo fan speed X-FAN function Auto quiet mode WIFI INTELLIGENT HOUR ON OFF Quiet mode Temp. display type Set fan speed Send signal battery power humidity functions Temp.display type Healthy mode Set temperature Up & down swing Left & right swing 8 heating function child lock I feel function Replacing air Sleep mode
:Set temp.
:Indoor ambient temp.
:Outdoor ambient temp. 10 Introduction for buttons on remote controller Note:
After putting through the power, the air conditioner will give out a sound. Operation indictor " " is ON (red indicator). After that, you can operate the air conditioner by using remote controller. Under on status, pressing the button on the remote controller, the signal icon " "
on the display of remote controller will blink once and the air conditioner will give out a de sound, which means the signal has been sent to the air conditioner. ON/OFF button 1 Press this button can turn on or turn off the air conditioner. After turning on the air conditioner, operation indicator " "on indoor units display is ON (green indicator. The colour is different for different models), and indoor unit will give out a sound. 2
+/- button Press "+" or " - " button once increase or decrease set temperature 0.5 Holding "+" or " - " button, 2s later, set temperature on remote controller will change quickly.On releasing button after setting is finished, temperature indica-
tor on indoor unit will change accordingly. (Temperature cant be adjusted under auto mode) When setting TIMER , press "+" or " - " button to adjust time. Cool button 3 Press this button, unit will operate in cool mode. Heat button 4 Press this button, unit will operate in heat mode. 5 Pressing this button can set fan speed circularly as: low(
medium ( ),medium high( ),high( ),super( ),auto(AUTO),quiet( ). low medium( ), FAN button
) , Auto Note:
Turbo function is not available under dry and auto mode. Automatically operate slient speed when starting sleep fuction. The unit operates at low speed under dry and auto dry mode. The speed can't be adjusted. Under AUTO speed, air conditioner will select proper fan speed automatically according to ambient temperature. 11 Introduction for buttons on remote controller I FEEL button 6 Press this button to start I FEEL function and " " will be displayed on the remote controller. After this function is set, the remote controller will send the detected ambient temperature to the controller and the unit will automatically adjust the indoor temperature according to the detected temperature. Press this button again to close I FEEL function and " " will disappear. Please put the remote controller near user when this function is set. Do not put the remote controller near the object of high temperature or low temperature in order to avoid detecting inaccurate ambient temperature. 7 button Under simple swing mode, press this button can turn on (display " " icon ) or turn off ( not display " " icon) left&right swing function. Under OFF status, press "+" button and " " button simultaneously can switch between simple swing mode and fixed swing mode. During switching time, icon on remote controller will flash twice. Under fixed-angle swing mode, press this button and the left and right swing status will change in the sequence as below:
no display
(stops at current position) MODE button 8 Press this button to select your required operation mode. AUTO COOL DRY FAN HEAT 12 Introduction for buttons on remote controller When selecting auto mode, air conditioner will operate automatically according to ambient temperature. Set temperature cant be adjusted and will not be displayed as well. Press "FAN" button can adjust fan speed. Press " " / " " button can adjust fan blowing angle. After selecting cool mode, air conditioner will operate under cool mode. Press "+" or "-" button to adjust set temperature. Press "FAN" button to adjust fan speed.Press " " / " " button to adjust fan blowing angle. When selecting dry mode, the air conditioner operates at low speed under dry mode. Under dry mode, fan speed cant be adjusted. Press " " / " " button to adjust fan blowing angle. When selecting fan mode, the air conditioner will only blow fan,Press "FAN" button to adjust fan speed. Press " " / " " button to adjust fan blowing angle. When selecting heating mode, the air conditioner operates under heat mode. Press "+" or "- " button to adjust set temperature. Press "FAN" button to adjust fan speed. Press " " / " " button to adjust fan blowing angle. (Cooling only unit wont receive heating mode signal. If setting heat mode with remote controller, press ON/OFF button cant start up the unit). Note:
For preventing cold air, after starting up heating mode, indoor unit will delay 1~5 minutes to blow air (actual delay time is depend on indoor ambient temperature). Set temperature range from remote controller: 16~30 (61-86F);
button 9 Under simple swing mode, press this button can turn on ( display " " icon) or turn off ( not display " " icon) up&down swing function. Under OFF status, press "+" button and " " button simultan eously can switch between simple swing mode and fixed swing mode. During switching time, icon on remote controller will flash twice. Under fixed swing mode, press this button and up and down swing status will change in the sequence as below:
no display
(horizontal louvers stops at current position) 13 Introduction for buttons on remote controller 10 T-ON/T-OFF button T-ON button T-ON button can set the time for timer on. After pressing this button, " " icon disappears and the word ON" on remote controller blinks. Press + or -button to adjust T-ON setting. After each pressing + or -button, T-ON setting will increase or decrease 1min. Hold + or -button, 2s later, the time will change quickly until reaching your required time. PressT-ONto confirm it. The word ON will stop blinking. " " icon resumes displaying.Cancel TIMER ON: Under the condition that T-ON is started up, press T-ON button to cancel it. T-OFF button T-OFF button can set the time for timer off. After pressing this button, " " icon disappears and the word "OFF" on remote controller blinks. Press "+" or "-" button to adjust T-OFF setting. After each pressing "+" or "-" button, T-OFF setting will increase or decrease 1min. Hold "+" or "-" button, 2s later, the time will change until reaching your required time. PressT-OFFto confirm it. The word ONwill
"OFF" will stop blinking. " " icon resumes displaying. Cancel T-OFF.Under the condition that T-OFF is started up, press T-OFF button to cancel it. Note:
Under on and off status, you can set T-OFF or T-ON simultaneously. Before setting T-ON or T-OFF, please adjust the clock time. After starting up T-ON or T-OFF, set the constant circulating valid. After that, air conditioner will be turned on or turned off according to setting time. ON/OFF button has no effect on setting. If you dont need this function, please use remote controller to cancel it. 11 CLOCK button Press this button to set clock time. " " icon on remote controller will blink. Press "+" or "-" button within 5s to set clock time. Each pressing of "+" or "-"
button, clock time will increase or decrease 1 minute. Hold "+" or "-" button, 2s later, time will change quickly. Release this button when reaching your required time. Press CLOCKbutton to confirm the time. " " icon stops blinking. Note:
Clock time adopts 24-hour mode. The interval between two operations cant exceeds 5s. Otherwise, remote controller will quit setting status. Operation for TIMER ON/TIMER OFF is the same. 14 Introduction for buttons on remote controller 12 Humdity/health button Press this button to select your required operation mode. INTELLIGENT INTELLIGENT cancel Note:there is no this function for this unit. If press this button,the main unit will click, but it also runs under original status. X-FAN button 13 Pressing this button in COOL or DRY mode, the icon " " is displayed and the indoor fan will continue operation for 2 minutes in order to dry the indoor unit even though you have turned off the unit. After energization, X-FAN OFF is defaulted. X-FAN is not available in AUTO, FAN or HEAT mode. This function indicates that moisture on evaporator of indoor unit will be blowed after the unit is stopped to avoid mould. Having set X-FAN function on: After turning off the unit by pressing ON/OFF button indoor fan will continue running for about 2 min. at low speed. In this period, press X-FAN button to stop indoor fan directly. Having set X-FAN function off: After turning off the unit by pressing ON/OFF button, the complete unit will be off directly. 14 Air button Press this button to select your required operation mode. cancel Note:there is no this function for this unit. If press this button,the main unit will click, but it also runs under original status. LIGHT button 15 Pressing this button to turn off display light on indoor unit. Press this button again to turn on display light. SLEEP button 16
Pressing this button can select Sleep 1, Sleep 2,Sleep 3, Sleep 4 or cancel Sleep circularly as below:
cancel 15 Introduction for buttons on remote controller
In Sleep 1 and Sleep 2, the air conditioner will run according to a group of presetting temperature curves.
Sleep 3 - the sleep curve setting under DIY Sleep mode:
(1) Under Sleep 3 mode, long press "AIR" button, the remote controller will enter the setting of personalized sleep. In this case, the timer zone of remote controller will display "1 hr" and the set temperature zone "88" will display the corresponding temperature of the last set sleep curve and blink (The first entering will display according to the initial curve setting value of manufacturer);
(2) Press "+" and "-" button to adjust the corresponding temperature. After adjusting, press "AIR" button to confirm it;
(3) At this time, the timer time on the remote controller will increase automatically by 1hr (that is "2 hr" or "3 hr" or "8 hr"). The set temperature zone "88" will display the corresponding temperature of the last set sleep curve and blink;
(4)Repeat step(2) and step (3) until 8-hour temperature setting is finished, then the sleep curve is set successfully. After that, remote controller will resume displaying the original timer time and temperature zone will resume displaying the original set temperature.
Sleep 3 - the sleep curve inquiry under DIY Sleep mode:
User can inquire the set sleep curve according to the setting method of sleep curve. Enter the setting of personalized sleep but do not change the temperature. Then press "AIR" button to confirm the setting. Note: In the above setting or inquiry procedure, if there is no button pressing within 10s, remote controller will automatically exit the sleep curve setting and resume the HEATING button is pressed during the setting or inquiry procedure, remote controller original display. If ON/OFF, MODE, TIMER, HUMIDIFY, SLEEP, COOLING or will also exit the sleep curve setting.
Sleep 4 is Siesta mode. The set temperature will change automatically according to the features of siesta.
Sleep function will be disabled if the air condition is restarted after power failure;
when sleep function is turned on, quite fan speed will be also turned on.
Sleep function can not be set in AUTO mode. Wifi button 17 Press this button 3s can set wifi function on or OFF. At OFF status,press mode button and wifi button,can reset wifi mode parameter. and open wifi function. 16 Function introduction for combination buttons About X-FAN function This function indicates that moisture on evaporator of indoor unit will be blowed after the unit is stopped to avoid mould. 1. Having set X-FAN function on: After turning off the unit by pressing ON/OFF button indoor fan will continue running for about 2 min. at low speed. In this period, press X-FAN button to stop indoor fan directly. 2. Having set X-FAN function off: After turning off the unit by pressing ON/OFF button, the complete unit will be off directly. About AUTO RUN When AUTO RUN mode is selected, the setting temperature will not be displayed on the LCD, the unit will be in accordance with the room temp. automatically to select the suitable running method and to make ambient comfortable. About lock Press + and - buttons simultaneously to lock or unlock the keyboard. If the remote co-
ntroller is locked, the icon will be displayed on it, in which case, press any button, the mark will flicker for three times. If the keyboard is unlocked, the mark will disappear. About switch between Fahrenheit and Centigrade Under status of unit off, press MODE and - buttons simultaneously to switch and . 17 Operation guide 1. After putting through the power, press "ON/OFF" button on remote controller to turn on the air conditioner. 2. Press "MODE" button to select your required mode: AUTO, COOL, DRY, FAN, HEAT. 3. Press "+" or " - " button to set your required temperature. (Temperature cant be adjusted under auto mode). 4. Press "FAN" button to set your required fan speed: auto, low, medium and high speed. 5. Press "SWING" button to select fan blowing angle. Replacement of batteries in remote controller 1. Press the back side of remote controller marked signal sender battery the cover of battery box along the arrow direction. 2. Replace two 7# (AAA 1.5V) dry batteries, and make sure the position of "+" polar and "-" polar are correct. 3. Reinstall the cover of battery box. Battery level will be displayed on the remote controller.When " " is flickering, please replace the batteries, otherwise, remote controller cant operate normally. NOTICE reinstall remove Cover of battery box battery level During operation, point the remote control signal sender at the receiving window on indoor unit. The distance between signal sender and receiving window should be no more than 8m, and there should be no obstacles between them. Signal may be interfered easily in the room where there is fluorescent lamp or wireless telephone; remote controller should be close to indoor unit during operation. Replace new batteries of the same model when replacement is required. When you dont use remote controller for a long time, please take out the batteries. If the display on remote controller is fuzzy or theres no display, please replace batteries. 18 Operation of Smart Control (Smart Phone, Tablet PC) Special Function How to operate AC or auxiliary device with smart phone or tablet PC after matching:
First of all: before using smart connection function, please make sure your smart phone or tablet computer uses the standard Android or iOS operating system. Please refer to the application program for the specific version. This air conditioner can connect 4 smart phones or tablet computers in maximum. 1. Install G-Life on your smart phone/ tablet PC Method 1: Enter Gree official website to download http://www.gree.com/english/
downloadcenter/ihome_jsp_catid_2840.shtml Method 2: Scan the QR code and download the application directly (If your device is not compatible, please download the application in other ways.) Method 3: Users of iOS system can search the application G-Life through Apples App Store. After it is successfully installed, you will see the picture below. Following is the example using iphone4s. (The interface of the application may vary as it is upgraded or used in different operating systems. Please refer to actual application.) 19 Operation of Smart Control (Smart Phone, Tablet PC) 2. Turn on the AC WiFi:
Turn the AC on. First, make sure the remote controller is matched. Then, long-press WiFi button on the remote controller for at least 3 seconds. If WiFi icon is shown, it means the WiFi function is turned on. 3. Enter the WiFi setting of your phone and search for the wireless network named gree-xxxxxxxx. Take gree-E9D1 as an example. Connect the network. 4. Input the original password 12345 to connect the network. 5. Open the application software and click Refresh, and then system will link with the air conditioner automatically. Click to turn on the control function, and then clock any position on the interface and then software will switch to the remote control interface. 20 Operation of Smart Control (Smart Phone, Tablet PC) Attention: please change the name and key of the network during the first setting!
6. Left-slide the bottom function bar to Settings and click it to enter into internet setting interface. Click Network Setting, and input user name and password (the defaulted user name and password is admin) in the Login dialog box to enter into Network Setting to modify network name (e.g. gree-my home) and password (refer to the attachment: safe mode and password instruction). 7. After modifying name and password, click it to return and there will be a prompt box, and then clock OK to finish the modification. Meanwhile, the software will turn back to interface of Air-Conditioner and the AC list will be gone. 8. Exit the application and enter your phones WiFi Setting. Then you will see the network you just named gree-my home". Click it and input the password set in step 6 to join the network. 21
1 2 | 140815007GZU 2ADAP-SAA1FB1F User Manual-2 Rev1 | Users Manual | 3.54 MiB |
Operation of Smart Control (Smart Phone, Tablet PC) 9. Enter into the software interface again. Meanwhile, the short-distance remote control setting for your air conditioner is finished. How to reset the AC WiFi module:
Turn unit off with the remote controller and disconnect the power of AC. Then re-connect the power. 1 minute later, press WiFi and Mode buttons simultaneously. If the AC gives out a beep sound, it means the WiFi module is successfully reset. Attention: Operation of the buttons is only effective in 2 minutes. Analysis on Common Network Setting Failure:
1. If short-distance control fails, please check the following items one by one!
Make sure AC is power connected;
Make sure ACs WiFi function is turned on as normal;
Make sure your phones WiFi selects the corresponding AC;
Reset with the remote controller and then start setting again from step 3. Kindly remind:
1. The air conditioner WiFi function needs about 1 minute to start up. 2. The air conditioner has memory function. 3. Those models have no long-distance control. 22 Operation of Smart Control (Smart Phone, Tablet PC) Function Introduction on Main Interface 1. Mode: It used for setting operation mode for air conditioner. You can select Auto, Cooling, Drying, Fan or Heating according to your requirement. Please refer to the part of remote controller for the detailed operation. 2. Temperature: It used for setting temperature. Set the indoor temperature according to your requirement. 3. Fan Speed: It used for setting fan speed. Under cooling or heating mode, if the noise-customized function is turned on, adjust the fan speed and then the noise-
-customized function will be turned off automatically. Please refer to the part of remote controller for detailed operation. 23 Operation of Smart Control (Smart Phone, Tablet PC) Key Functions Instruction of Application Software 1. Preset: Its with Timer On and Timer Off function. User can set Timer On and Timer Off according to actual individual requirement. 2.Functions: After entering setting interface, you can turn on or turn off Light, Purify, X-fan and Turbo functions and set Silent, Humidify, Air exchange and other modes. Please refer to the part of remote controller for the function instruction. Among that, Purify, Humidify, Air exchange functions can be set through equipping with special air purifier, humidifier. E-heater is not available for this unit. 3. Swing: During up&down swing and left&right swing, its the fixed angle swing when those two sliding blocks are combined together and full swing when they are separated. When setting up&down swing, the program will turn off regional swing function. However, no influence for regional swing when setting left&right swing. 24 Operation of Smart Control (Smart Phone, Tablet PC) 4. Advanced: After entering advanced interface, you can set Sleep curve, Regional Swing, Noise and Power saving. Sleep curve: Sleep curve includes DIY mode, Traditional mode, Expert mode and Siesta mode. Under DIY mode, you can set temperature and time. Under auto mode and fan mode, sleep curve function cant be turned on. Only Traditional mode can be selected under dry mode. Regional Swing: After entering Regional Swing, user can set it according to the room size. Press Air flow position button and the user can adjust the fan-blowing area through moving the icon of air conditioner left and right according to the actual installation position of the unit. User can move the person icon among nine pane areas according to requirement to adjust the fan-blow area. The Regional Swing function can be turned off through up&down swing. The up&down swing in the Regional Swing is only valid under cooling and heating modes. The left&right swing area has relationship with the position of air conditioner set by mobile phone. The left&right swing position may be asymmetry, which is the normal phenomenon. Avoid people function can be turned on or turned off according to users personal experience. There may be deviation because of the installation position of air conditioner and the setting of parameters, which is the normal phenomenon. 25 Operation of Smart Control (Smart Phone, Tablet PC) Noise: The noise-customized function for indoor unit can be adjusted according to the actual individual requirement. The detailed adjustment range is different for different models, which is decided by indoor unit. Power saving: After energy saving navigation mode is turned on, the air conditioner will detect indoor temperature and outdoor temperature automatically. Meanwhile, the air conditioner will adjust frequency, fan speed and set tempera-
ture automatically according to the load status for saving energy. 26 Emergency operation If remote controller is lost or damaged, please use auxiliary button to turn on or turn off the air conditioner. The operation in details are as below:
air conditioner. When the air conditioner is turned on, it will operate under auto mode. panel Display panel aux. button WARNING:
Use insulated object to press the auto button Clean and maintenance WARNING Turn off the air conditioner and disconnect the power before cleaning the air conditioner to avoid electric shock. Do not wash the air conditioner with water to avoid electric shock. Do not use volatile liquid to clean the air conditioner. Clean surface of indoor unit When the surface of indoor unit is dirty, it is recommended to use a soft dry cloth or wet cloth to wipe it. NOTICE:
Do not remove the panel when cleaning it. 27 Clean and maintenance Open panel Open the panel into a certain angle(less than 60, do not open the panel too forcibly) along the arrow direction from the two sides of panel. 3 Use dust catcher or water to the water (below 45 ) to clean it, and then put it in a shady and cool place to dry. 1 2 4 Install the filter and then close the panel cover tightly.(Press the arrow (1) position to check whether it buckled tightly. )
WARNING operation environment, clean frequency can be increased. 28 Clean and maintenance NOTICE: Checking before use-season 1. Check whether air inlets and air outlets are blocked. 2. Check whether circuit break, plug and socket are in good condition. 4. Check whether drainage pipe is damaged. NOTICE: Checking after use-season 1. Disconnect power supply. Notice for recovery 1. Many packing materials are recyclable materials. Please dispose them in appropriate recycling unit. 2. If you want to dispose the air conditioner, please contact local dealer or consultant service center for the correct disposal method. 29 Malfunction analysis General phenomenon analysis Please check below items before asking for maintenance. If the malfunction still cant be eliminated, please contact local dealer or qualied professionals. Phenomenon Check items Solution Whether it's interfered severely
(such as static electricity,stable voltage)?
Pull out the plug. Reinsert the plug after about 3min, and then turn on the unit again. Whether remote controller is within the signal receiving range?
Signal receiving range is 8m. Whether there are obstacles?
Remove obstacles. Whether remote controller is pointing at the receiving window?
Is sensitivity of remote contro-
ller low; fuzzy display and no display?
Select proper angle and point the remote controller at the re-
ceiving window on indoor unit. Check the batteries. If the power of batteries is too low, please replace them. No display when operating remote controller?
Fluorescent lamp in room?
Check whether remote cont-
roller appears to be damaged. If yes, replace it. Take the remote controller close to indoor unit. Turn off the uoresent lamp and then try it again. Air inlet or air outlet of indoor unit is blocked?
Eliminate obstacles. Under heating mode, indoor temperature is reached to set temperature?
After reaching to set temper-
ature, indoor unit will stop bl-
owing out air. Heating mode is turned on just now?
In order to prevent blowing out cold air, indoor unit will be started after delaying for sev-
eral minutes, which is a nor-
mal phenomenon. Indoor unit cant receive remote controllers signal or remote controller has no action. No air emitted from indoor unit 30 Malfunction analysis Phenomenon Check items Solution Power failure?
Is plug loose?
Wait until power recovery. Reinsert the plug. Air condit-
ioner cant operate Air switch trips off or fuse is burnt out?
Ask professional to replace air switch or fuse. Wiring has malfunction?
Ask professional to replace it. Unit has restarted immediately after stopping operation?
Wait for 3min, and then turn on the unit again. Whether the function setting for remote controller is correct?
Reset the function. Mist is em-
itted from indoor units air outlet Set temper-
ature cant be adjusted Indoor temperature and hum-
idity is high?
Unit is operating under auto mode?
Because indoor air is cooled rapidly. After a while, indoor temperature and humidity will be decrease and mist will disappear. Temperature cant be adju-
sted under auto mode. Please switch the operation mode if you need to adjust temperature. Your required temperature exceeds the set temperature range?
Set temperature range:
16 ~30 . Cooling
(heating) effect is not good. Voltage is too low?
Wait until the voltage resumes normal. Filter is dirty?
Clean the lter. Set temperature is in proper range?
Adjust temperature to proper range. Door and window are open?
Close door and window. 31 Malfunction analysis Phenomenon Check items Solution Odours are emitted Whether theres odour source, such as furniture and cigarette, etc. Eliminate the odour source. Clean the lter. Air conditioner operates nor-
mally suddenly Whether theres interference, such as thunder, wireless devices, etc. Disconnect power, put back power, and then turn on the unit again. Outdoor unit has vapor Wa t e r owing noise Heating mode is turned on?
Air conditioner is turned on or turned off just now?
Cracking noise Air conditioner is turned on or turned off just now?
During defrosting under he-
ating mode, it may generate vapor, which is a normal phenomenon. The noise is the sound of refrigerant owing inside the unit, which is a normal phenomenon. This is the sound of friction caused by expansion and/or contraction of panel or other parts due to the change of temperature. 32 Malfunction analysis Error Code When air conditioner status is abnormal, temperature indictor on indoor unit will ation of error code. Error code Troubleshooting It can be eliminated after restarting the unit. If not , please It can be eliminated after restarting the unit. If not , please It can be eliminated after restarting the unit. If not,please It can be eliminated after restarting the unit. If not,please It can be eliminated after restarting the unit. If not,please E5 E6 E8 U8 H6 C5 F1 F2 Note: If there're other error codes, please contact qualified professionals for service. WARNING When below phenomenon occurs, please turn off air conditioner and discon-
for service. Power cord is overheating or damaged. Theres abnormal sound during operation. Air switch trips off frequently. Air conditioner gives off burning smell. Indoor unit is leaking. If the air conditioner operates under abnormal conditions, it may cause 33 Installation dimension diagram g n i l i e c e h t o t e c a p S At least 15cm Space to the wall s t 3 a b e o A t l e e t o t h c a p S c m c ti o 0 0 s tr u m c 5 1 t s a e l t A n Space to the wall At least 15cm m c 0 5 2 t s a e l t A 34 Tools for installation 1 Level meter 4 Drill head 2 Screw driver 3 Impact drill 5 Pipe expander 6 Torque wrench 7 Open-end wrench 8 Pipe cutter 9 Leakage detector 10 Vacuum pump 11 Pressure meter 12 Universal meter 13 Inner hexagon spanner 14 Measuring tape Note:
Please contact the local agent for installation. Selection of installation location Basic requirement Indoor unit Installing the unit in the following pla-
ces maycause malfunction. If it is un-
avoidable, please consult the local dealer:
1.The place with strong heat sources,
, or volatile objects spread in the air. 2.The place with high-frequency devices (such as welding machine, medical equipment). 3.The place near coast area. 4.The place with oil or fumes in the air. 5.The place with sulfureted gas. 6.Other places with special circums-
tances. 7.The appliance shall not be installed in the laundry. 1. There should be no obstruction near air inlet and air outlet. 2. Select a location where the condensat-
ion water can be dispersed easily and won't affect other people. 3. Select a location which is convenient to connect the outdoor unit and near the power socket. 4. Select a location which is out of reach for children. 5. The location should be able to withstand the weight of indoor unit and won't incr-
ease noise and vibration. 6. The appliance must be installed 2.5m 7. Don't install the indoor unit right above the electric appliance. 8. Please try your best to keep way from 35 Requirements for electric connection Safety precaution 1. Must follow the electric safety regulations when installing the unit. air switch. 3. Make sure the power supply matches with the requirement of air conditioner. Unstable power supply or incorrect wiring or malfunction. Please install proper power supply cables before using the air conditioner. 4. Properly connect the live wire, neutral wire and grounding wire of power socket. 5. Be sure to cut off the power supply before proceeding any work related to electricity and safety. 7. If the supply cord is damaged, it must be replaced by the manufacturer, its 8. The temperature of refrigerant circuit will be high, please keep the interconnec-
tion cable away from the copper tube. 9. The appliance shall be installed in accordance with national wiring regulations. Grounding requirement grounding with specialized grounding device by a professional. Please make sure it is always grounded effectively, otherwise it may cause electric shock. 2. The yellow-green wire in air conditioner is grounding wire, which can't be used for other purposes. 3. The grounding resistance should comply with national electric safety regulations. 4. The appliance must be positioned so that the plug is accessible. 5. An all-pole disconnection switch having a contact separation of at least 3mm in sure the plug is within reach after installation. For models with a power plug, make 36 Installation of indoor unit Step one: choosing installation location rm it with the client. Step two: install wall-mounting frame 1. Hang the wall-mounting frame on the wall; adjust it in horizontal position with the plastic expansion particles in the holes. 3. Fix the wall-mounting frame on the wall with tapping screws (ST4.2X25TA) and
. Step three: open piping hole 1. Choose the position of piping hole according to the direction of outlet pipe. The position of piping hole should be a little lower than the wall-mounted frame, shown as below. Mark in the middle of it Level meter Wall Space to the wall above 150mm Left 55/70mm Rear piping hole Wall Space to the wall above 150mm Right 55/70mm Rear piping hole 2. Open a piping hole with the diameter of 55 or 70 on the selected outlet pipe position.In order to drain smoothly, slant the piping hole on the wall slightly downward to the outdoor side with the gradient of 5-10. 37 Installation of indoor unit Note:
Pay attention to dust prevention and take relevant safety measures when opening the hole. The plastic expansion particles are not provided and should be bought locally. Step four: outlet pipe 1. The pipe can be led out in the direction of right, rear right, left or rear left. Indoor outdoor 5-10 55 /
70 2. When select leading out the pipe from left or right, please cut off the corresponding hole on the bottom case. left right rear left right rear right l e f t cut off the hole 1. Aim the pipe joint at the corresponding bellmouth. 2. Pretightening the union nut with hand. pipe joint union nut pipe 3. Adjust the torque force by referring to the following sheet. Place the open-end wrench on the pipe joint and place the torque wrench on the union nut. Tighten the union nut with torque wrench. 38 Installation of indoor unit Hex nut diameter Tightening torque (N.m) open-end wrench union nut pipe torque wrench indoor pipe 4. Wrap the indoor pipe and joint of con-
nection pipe with insulating pipe, and then wrap it with tape. 6 9.52 12 16 19 15~20 30~40 45~55 60~65 70~75 insulating pipe 5. If a 18k indoor unit is to be connected with Free Match outdoor unit, a transitional pipe joint (provided) should be added at the pipe joint of indoor unit evaporator assy as the pipe joint of evaporator assy adopts pipe diameter of 16. Please refer to step 1-4 during installation. Step six: install drain hose 1. Connect the drain hose to the outlet pipe of indoor unit. 2. Bind the joint with tape. drain hose outlet pipe tape Note:
Add insulating pipe in the indoor drain hose in order to prevent condensation. The plastic expansion particles are not provided. outlet pipe drain hose drain hose insulating pipe Step seven: connect wire of indoor unit pane screw 1. Open the panel, remove the screw on the wiring cover and then take down the cover. 39 wiring cover Installation of indoor unit 2. Make the power connection wire go through the cable-cross hole at the back of indoor unit and then pull it out from the front side. cable-cross hole power connection wire 3. Remove the wire clip; connect the power connection wire to the wiring terminal with wire clip.After finishing wiring , clamp the grounding wire (yellow-green wire) into the wire-crossing groove as shown in the following figure, in order to avoid pressing the wire when closing the electric box cover. L1 S L2 white
(blue) black red
(brown) green
(yellow-
green) Outdoor unit connection 4.Put wiring cover back and then tighten the screw 5.Close the panel. Note:
All wires of indoor unit and outdoor uni t should be connected by a professional. If the length of power connection wire is insufficient, please contact the supplier for a new one. Avoid extending the wire by yourself. For the air conditioner with plug, the plug should be reachable after finishing installation. For the air conditioner without plug, an air switch must be installed in the line. The air switch should be all-pole parting and the contact parting distance should be more than 3mm. 40 Installation of indoor unit Step eight: bind up pipe 1. Bind up the connection pipe, power cord and drain hose with the band. indoor and outdoor power cord indoor unit gas pipe connection pipe drain hose band band liquid pipe drain hose 2. Reserve a certain length of drain hose and power cord for installation when binding them. When binding to a certain degree, separate the indoor power and then separate the drain hose. indoor power cord 3. Bind them evenly. 4. The liquid pipe and gas pipe should be bound separately at the end. Note:
The power cord and control wire can't be crossed or winding. The drain hose should be bound at the bottom. Step nine: hang the indoor unit 1. Put the bound pipes in the wall pipe and then make them pass through the wall hole. 2. Hang the indoor unit on the wall-mounting frame. 3. Stuff the gap between pipes and wall hole with sealing gum. 4. Fix the wall pipe. 5.Check if the indoor unit is installed firmly and closed to the wall. indoor outdoor wall pipe sealing gum upper hook lower hook of wall-mounting frame Note:
Do not bend the drain hose too excessively in order to prevent blocking. 41 Vacuum pumping Use vacuum pump Lo Hi valve cap gas valve piezometer liquid valve nut of refrigerant charging vent refrigerant charging vent 1. Remove the valve caps on the liquid valve and gas valve and the nut of refri-
gerant charging vent. 2. Connect the charging hose of piezometer to the refri-
gerant charging vent of gas valve and then connect the other charging hose to the vacuum pump. 3. Open the piezometer com-
pletely and operate for 10-15min to check if the pressure of piezometer re-
mains in -0.1MPa. 4. Close the vacuum pump and maintain this status for 1-2min to check if the pres-
sure of piezometer remains in -0.1MPa. If the pressure decreases, there may be leakage. 5. Remove the piezometer, open the valve core of liquid valve and gas valve completely with inner hexagon spanner. 6. Tighten the screw caps of valves and refrigerant charging vent. 7. Reinstall the handle. inner hexagon spanner close open vacuum pump Leakage detection 1. With leakage detector:
Check if there is leakage with leakage detector. 2. With soap water:
If leakage detector is not available, please use soap water for leakage detection. Apply soap water at the suspected position and keep the soap water for more than 3min. If there are air bubbles coming out of this position, there's a leakage. 42 Check after installation Check according to the following requirement after nishing installation. Items to be checked Possible malfunction Has the unit been installed rmly?
The unit may drop, shake or emit noise. Have you done the refrigerant leakage test?
It may cause insufcient cooling
(heating) capacity. Is heat insulation of pipeline sufcient?
Is water drained well?
It may cause condensation and water dripping. It may cause condensation and water dripping. Is the voltage of power supply accord-
ing to the voltage marked on the nameplate?
It may cause malfunction or damaging the parts. Is electric wiring and pipeline installed correctly?
It may cause malfunction or damaging the parts. Is the unit grounded securely?
It may cause electric leakage. Does the power cord follow the speci-
cation?
It may cause malfunction or damaging the parts. Is there any obstruction in the air inlet and outlet?
It may cause insufcient cooling
(heating) capacity. The dust and sundries caused during installation are removed?
It may cause malfunction or damaging the parts. The gas valve and liquid valve of connection pipe are open completely?
It may cause insufcient cooling
(heating) capacity. Test operation 1. Preparation of test operation The client approves the air conditioner. Specify the important notes for air conditioner to the client. 2. Method of test operation Put through the power, press ON/OFF button on the remote controller to start operation. Press MODE button to select AUTO, COOL, DRY, FAN and HEAT to check whether the operation is normal or not. If the ambient temperature is lower than 16 , the air conditioner cant start cooling. 43 Configuration of connection pipe 1. Standard length of connection pipe 5m, 7.5m, 8m. 2.Min. length of connection pipe is 3m. 3.Max. length of connection pipe and max. high difference. Cooling capacity Max length of connec-
tion pipe Max height difference Cooling capacity Max length of connec-
tion pipe Max height difference 5000Btu/h
(1465W) 7000Btu/h
(2051W) 9000Btu/h
(2637W) 12000Btu/h
(3516W) 18000Btu/h
(5274W) 15 15 15 20 25 5 5 5 10 10 24000Btu/h
(7032W) 28000Btu/h
(8204W) 36000Btu/h
(10548W) 42000Btu/h
(12306W) 48000Btu/h
(14064W) 25 30 30 30 30 10 10 20 20 20 4. The additional refrigerant oil and refrigerant charging required after prolonging connection pipe After the length of connection pipe is prolonged for 10m at the basis of standard length, you should add 5ml of refrigerant oil for each additional 5m of connection pipe. The calculation method of additional refrigerant charging amount (on the basis of liquid pipe):
Additional refrigerant charging amount=prolonged length of liquid pipe additional refrigerant charging amount per meter Basing on the length of standard pipe, add refrigerant according to the requirement as shown in the table. The additional refrigerant charging amount per meter is different according to the diameter of liquid pipe. See the following sheet. 44
Additional refrigerant charging amount for R22, R407C, R410A and R134a Diameter of connection pipe Outdoor unit throttle Liquid pipe(mm) Gas pipe(mm) Cooling only(g/m) Cooling and heating(g/m) 6 9.52 or 12 6 or 9.52 16 or 19 12 16 19 22.2 19 or 22.2 25.4 or 31.8 _ _ 15 15 30 60 250 350 20 50 120 120 250 350 45 Pipe expanding method Note:
Improper pipe expanding is the main cause of refrigerant leakage. Please expand the pipe according to the following steps:
A: Cut the pipe Conrm the pipe length according to the distance of indoor unit and outdoor unit. Cut the required pipe with pipe cutter. pipe E: Expand the port Expand the port with expander. hard mold expander pipe cutter leaning uneven burr B: Remove the burrs Remove the burrs with shaper and prevent the burrs from getting into the pipe. pipe shaper downwards C: Put on suitable insulating pipe D: Put on the union nut Remove the union nut on the indoor connection pipe and outdoor valve;
install the union nut on the pipe. union pipe pipe Note:
"A" is different according to the diameter, please refer to the sheet below:
Outer diameter
(mm) 6-6.35(1/4") 9.52(3/8") 12-12.7(1/2") 15.8-16(5/8") A(mm) Max Min 1.3 1.6 1.8 2.4 0.7 1.0 1.0 2.2 F: Inspection Check the quality of expanding port. If there is any blemish, expand the port again according to the steps above. smooth surface improper expanding pipe leaning damaged surface crack uneven thickness the length is equal 46 GREE ELECTRIC APPLIANCES, INC. OF ZHUHAI Add: West Jinji Rd, Qianshan, Zhuhai, Guangdong, China, 519070 Tel: (+86-756) 8522218 Fax: (+86-756) 8669426 E-mail: gree@gree.com.cn www.gree.com 66160000125
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-12-28 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
2 | 2425 ~ 2475 | DXX - Part 15 Low Power Communication Device Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2014-12-28
|
||||
1 2 | Applicant's complete, legal business name |
Gree Electric Appliances, Inc. of Zhuhai
|
||||
1 2 | FCC Registration Number (FRN) |
0023963978
|
||||
1 2 | Physical Address |
Jinji West Rd,Qianshan,Zhuhai,Guangdong
|
||||
1 2 |
519070
|
|||||
1 2 |
Zhuhai, N/A
|
|||||
1 2 |
China
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
h******@acbcert.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
2ADAP
|
||||
1 2 | Equipment Product Code |
CS532K
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
L******** L******
|
||||
1 2 | Telephone Number |
+86-7********
|
||||
1 2 | Fax Number |
+86-7********
|
||||
1 2 |
j******@gree.com.cn
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Intertek Testing Services Shenzhen Ltd-Guangzhou
|
||||
1 2 |
Intertek Testing Services Shenzhen Ltd. Guangzhou
|
|||||
1 2 | Name |
H**** M********
|
||||
1 2 | Physical Address |
Block E, No.7-2, Guang Dong Software Park
|
||||
1 2 |
Block E, No.7-2 Guang Dong Software Park
|
|||||
1 2 |
Guangzhou, Guangdong, 510663
|
|||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
86-20********
|
||||
1 2 | Fax Number |
86-20********
|
||||
1 2 |
h******@intertek.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | DXX - Part 15 Low Power Communication Device Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Air Conditioner | ||||
1 2 | Air conditioner | |||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 2 | Grant Comments | Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Intertek Testing Services Shenzhen Ltd.
|
||||
1 2 | Name |
s****** y********
|
||||
1 2 | Telephone Number |
86282********
|
||||
1 2 |
s******@intertek.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2412.00000000 | 2462.00000000 | 0.1361400 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2425.00000000 | 2475.00000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC