OWNERS MANUAL WIFI MODULE 532AH(LT) Thank you for choosing our product, For proper operation, please read and keep this manual carefully. A. FCC WARNING WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. AX FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to, comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentjal installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to try to, correct the interference by one or more of the following measures:
+ Reorient or relocate the receiving antenna. Increase the separation between the equipment and, receiver.
+ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected]
+ Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada licence-
exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de 'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with FCC's and IC's RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers must ensure that 20cm separation distance will be maintained between the device (excluding its handset) and users. Cet appareil est conforme aux limites dexposition au rayonnement RF stipules par la FCC et IC pour une utilisation dans un environnement non contrl. Les antennes utilises pour cet metteur doivent tre installes et doivent fonctionner 4 au moins 20 cm de distance des utilisateurs et ne doivent pas tre places prs d'autres antennes ou metteurs ou fonctionner avec ceux-ci. Les installateurs doivent sassurer qu'une distance de 20 cm spare l'appareil (a exception du combin) des utilisateurs. Installation Instruction for WiFi Module Installation steps of WiFi module Note:Installation must be performed by qualified professionals. Otherwise, it may cause personal injury or damage.Do not put through the power before finishing installation 1. Open the panel of indoor unit and unscrew the screw on the electric box cover. wiring cover 2. Open the electric box cover and you can see the WiFi connection wire.
(The color of WiFi connection wire is the same as the color of connection ort in WiFi module) WIFI connection wire 3. Pull out the WIFI connection wire from the electric box and then connect it with, the port in WiFi module. Note: the WiFi connection wire shalll go through the wire groove,otherwise the electric box cannot be closed. WIFI connection wire WiFi module:
4. Place the WiFi module beside the electric box. After confirming the position, please fix the WiFi module with screws. Note:the position for placing WiFi module may be different for different models;
actual position please refer to the actual situation. WiFi module 5. Neaten the WiFi connection wire, close the electric box cover and then tighten the screws. 6. After closing the panel of indoor unit, the installation of WiFi module is done. GREE+App Operation Manual Control Flow Chart Intemet vonewir, |) cena dD oe a) Home Wii Operating Systems Requirement for User's smart phone:
4 iOS system Android system Support iOS7.0 and Support Android 4.0 and above version above version Download and installation Scan the QR code on the right side or search "GREE+" in the application market to download and install it. When "GREE+App" is installed, register the account and add the device to remote control and LAN control Gree Smart Home Appliances. ca]
GREE-App Download Linkage For More Information Scan the QR code on the right side for more information. For upgrades and improvement of products, content of GREE+App my be changed. Please refer to the App for actual operation. GREE*App Help Fosristeg men rte Na MT Nv oom NCO Ol ewELUETT Add.: West Jinji Rd, Qianshan, Zhuhai, Guangdong, China, 519070 Be Ezra Ly Lee ea) Pa eee cet arto