W MFRouter az Quick Start Guide MF-230 / MF-350 Getting To Know The WiMAX WiFi Portable Router greenpacke?
No. | Device Component Description 1 Power Button Press for 5 seconds to turn device on/off 2 WiMAX LED This light turns on when WiMAX signal is available. The following light colors indicate different levels of signal strength:
Green : Excellent Reception Orange: Good Reception Red: Weak Reception 3 WiFi LED Yellow/on: WiFi enabled Yellow/Blinking: data transmission Yellow/off: WiFi disabled 4 Power/Charging LED Red/on: Charging Red/Blinking: Low Battery Blue/on Battery Capacity > = 25%
Blue/Blinking Battery Capacity < 25%
5 USB/ charging connector Fix the accompanying USB cable to this device and PC to charge or connect to the PC. 6 Reset Button Resets the device to factory default settings. 7 | Strap holder To insert strap. Starting up Connect device to a PC and press the power button for 5 seconds. All three LEDs will turn on initially to indicate device is starting up. Driver Installation Connect the device to a PC through the provided micro USB cable. Once device is powered on, a storage called RX250 appears. Open the storage and double-click the file, setup.exe. Select a location to install this file and click Next. Saas hose Install Location chose che older Fv uhich co call wine Reuter Setup wilinstal Wiraxc Router ir the tcllowirg folder. T> install n a dtterent tolder, cick r ct anther Folder. Lice New: to continue. Soave reycired: 2.56 Space avaiable: 101.168 Ca) Your PC will then detect a new hardware called RX250 USB Ethernet/RNSIS Gadget and a wizard will appear to help you install the driver. Please install the software driver automatically. Once the installation is complete, you can start using the device. Guna aun ae Welcome to the Found New Hardware Wizard This wizard helps you install software for
+) If your hardware came with an installation CD or floppy disk. insert it now. What do you want the wizard to do?
lnstall the software auiomaticaly (Plecemmended Install froma list or spectic location (Advanced) Click Next to continue,
(ies Cee Setting up WiFi Connection Please connect to the default access point SSID which is the last six digits of CPE (WiMAX) MAC Address located on a sticker at the back of the device. The WEP PW is also available here. Switching to Sleep Mode Hold the power button for 1 second until blinking blue LED appears. Switching back to Operation Mode While device is in sleep mode, hold the power button for 1 second. Shutting Down Hold the power button for 3 seconds until all LEDs turn off. FCC Regulations:
= This devici C tion is quipment and ne re or an ex Cha party autho must not be other antenna uit different chnician for an Equipm ted SAR t!
ant ing