FCC ID: 2AEVN07545GWIFI RC AIRCRAFT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Warning Statements:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

GUANGDONG ATTOP TECHNOLOGY CO.,LTD. Agent Authorization Company: GUANGDONG ATTOP TECHNOLOGY CO.,LTD. Address: Linghai Industry Zone, Laimei Road, Chenghai District, Shantou, Guangdong, China Product Name: RC AIRCRAFT Model Number(s): W PRO, X-PACK PRO, X-PACK GPS, X-PACK 16, X-PACK 17, X-

PACK 18, X-PACK 19, X-PACK 20, W, W PRO E, W PRO S, W8, W8 PRO, W9, W9 PRO, W11, W12, W13, W15, W16, W17, W18, W19, W20, AO11, AO12, AO13, AO15, AO16, AO17, AO18, AO19, AO30, AO31, AO32, AO33, AO35, AO36, AO37, AO38, AO39 Product Description: RC AIRCRAFT We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Leo Kiu Date: 2020-11-19 Company: GUANGDONG ATTOP TECHNOLOGY CO.,LTD.

GUANGDONG ATTOP TECHNOLOGY CO.,LTD. Nov.19, 2020 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : 2AEVN07545GWIFI Model Number: W PRO, X-PACK PRO, X-PACK GPS, X-PACK 16, X-PACK 17, X-

PACK 18, X-PACK 19, X-PACK 20, W, W PRO E, W PRO S, W8, W8 PRO, W9, W9 PRO, W11, W12, W13, W15, W16, W17, W18, W19, W20, AO11, AO12, AO13, AO15, AO16, AO17, AO18, AO19, AO30, AO31, AO32, AO33, AO35, AO36, AO37, AO38, AO39 To Whom It May Concern:

We, The GUANGDONG ATTOP TECHNOLOGY CO.,LTD. hereby declare that the model are identical except the model names and packaging. Except for the different above, no other modification is performed. Sincerely, Signature:

GUANGDONG ATTOP TECHNOLOGY CO.,LTD. Contact person: Leo Kiu

GUANGDONG ATTOP TECHNOLOGY CO.,LTD. FCC Software Configuration Control Declaration Date: November 26, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: RC AIRCRAFT/ W PRO, X-PACK PRO, X-PACK GPS, X-PACK 16, X-PACK 17, X-PACK 18, X-PACK 19, X-PACK 20, W, W PRO E, W PRO S, W8, W8 PRO, W9, W9 PRO, W11, W12, W13, W15, W16, W17, W18, W19, W20, AO11, AO12, AO13, AO15, AO16, AO17, AO18, AO19, AO30, AO31, AO32, AO33, AO35, AO36, AO37, AO38, AO39 Regarding FCC Country Code Selection guidelines identified in KDB 594280 v02r01. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Leo Kiu Signature of applicant Date: 2020-11-19 FCC Software Configuration Control Declaration Rev1.1.docx

GUANGDONG ATTOP TECHNOLOGY CO.,LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020-11-05 Subject; Request for Confidentiality FCC ID: 2AEVN07545GWIFI To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description FCC Software Security Requirements for UNII devices Rev 2.1 In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely GUANGDONG ATTOP TECHNOLOGY CO.,LTD. Contact person: Leo Kiu