Suitable for 14 years old and above 4.CH RC QUAD-COPTER
(LATEST 6-AXIS FLIGHT SYSTEM / 4 Locking route mode The button can lock the flying direction no matter what direction the head pointing, easy to control back the drone. BUILTIN CAMERA
(PHOTOGRAPHIVIDEO) WAYS FLIPS) Locking route MAIN PARAMETERS:
Main blade diameter: 65mm, Frame width: 240mm, Frame length: 240mm, Frame height: 84mm, Battery: 3.7V450mAh Main motor type: 7x16 4pes Total weight: 9Ogt2e Charge time: About 80 minutes Gyroscope: Builtin Flight time: 5-7 minuts MIAN FEATURES:
easily 5 the, motors within the hel give the hel stable fight and enable it fo perform the actions 2: with the modularized structure, i's easy to install and convenient to disassemble for repair 3: with the 6 axis gyroscope and position control system automated, the heli can be easily stopped and accurately aloft 4: once fully charged, the 3.7V450mAh Li-Po battery gives approximately 5-7 minutes fight Thanks for choosing ATTOP product! This is a 4 axle aircraft which is capable of flying in confined space and outdoor, in order for you to maneuver the R.C. helicopter more conveniently and easily, please fly it only after this instruction manual is carefully read, in the meantime, this manual shall be properly kept for future necessary adjustment and repair work Suitable for indoor or outdoor which under Grade 3 winds. Mistakes made due to negligence Mistakes made due to of these operation instructions may negligence of operation cause property loss and severe instruction may cause Please do not fly the R.C helicopter under any specified forbidden IMPORTANT NOTES This RC helicopter is not a toy, though it is just a mini RC 4 axle heli, it still could be dangerous. Please fly the model RC heli according to the manual instruction and its notices. Any modification, maloperation or unfamiliarity to the heli could bring about unexpected danger or accident, please be prudent NOTE: for any RC helicopters, neither manufacture nor dealers is responsible for any losses caused by maloperation or improper assembly or accidents owing to abnormal abrasion or inappropriate environment. This product is suitable for 14years old and
|Q recon speed switch [
(404/70%/100% ) |
ascendidescend (TP) Power switch trimmer(F/B) headless button above. Please only operate the heli in safety environment, once sold: ATTOP will not hold any responsibilities for property loss and personal injury caused by maloperation, disassembly and modification. This model RC heli requires high operation skills and is consumable. After itspackage is opened and the heli is flown, varying degree of abrasions occur. Malfunction or dissatisfact ory brought about during usage will not be entitled to replacement nor return. In case of operation and repair instruction, please contact ATTOP and our agencies for technical support and after sale service. Pg Zxcaron
indoor, plea or electric sI crash, emer
(Sieooal The interior shall not be
(Srsonal Please do n its safety. PI
When install mix new batteries with old ones. For long time storage, please take them out to preve Please dispose abandoned baiteries in accordance to the laws and regulations of the corresponding region to prevent pollutionto the environment.
from crowd and pets etc, do not fly it in improper environment,such as areas with heat source, power line and power source etc.otherwise, fire of the components that may cause unexpected accident!
authentic ATTOP components to update, replace or fix RC heli to ensure use concerning its safety shall bestopped, R.C model and 4 axle aircrafts are products with danger; it must be away
{from the crowd when flying. Misassemble, defect, poor performance of the lelectronic control or improperoperation could lead to unexpected incident like plane damage or personal injury. Please pay attention to flight safety and make sure it is, well understood that responsibility will fall on the player for accidents caused by himself. R.C. heli. is for indoor and outdoor use only, must stay away from obstacles when flying This product is suitable for indoor and outdoor (wind scale must be under 4) use only, for 1se make sure it is clear of obstacles; for outdoor, stay away hock, oss of fortuneor personalinjury could occur due to gency landing or entwining Stay away from damp conditions x of heli consists of many precise electronic and mechanic components, therefore moisture and water must be prevented and it <, performed in bathroom or in rainy days to avoid breakdown Use the product properly ot tear apart or modify the RC heli at will and only apply, lease only maneuver it within its limit. Any illegal purpose of Aitent/ions to battery
| batteries, make sure the electric polarities are correct, do not nt battery leakage. Instrliction LicPo battery Flips button UR turning AUTO FREQUENCY ADJUSTING Pull the left stick to lower left corner and right stick to lower right comer simultaneously, After 3 seconds.LED light on the UFO head will fash, meansthe adjusting is complete you can control the quadcopter now. ILLUSTRATION MODE ILLUSTRATION. _)
(vertical press) Forward/Backward #) UR sideward fly S =) iS Video S Picture power rimmer(UR sideward) indicator light
(Power indicator light is red; low power is flashing slowly.and flashing fast when searching the frequency) The model is using the last six-axis gyro system and auto frequency adjusting system,normally the user don't need to adjusting the trimmer User can use trimmer when failed in auto-adjusting Peake 1.Power on the aircraft: Connecting the power of aircraft,then put the aircraft on a flat ground or table,3 secs rest 2.power on the remote:the indicator light is flashing,pull the throttle to the top and back to the lowest.then the remote indicator light is solid lighting.that means the aircraft has sussessed connected with the romote,and you can prepare for your flying action. 3.Notes when flying: Throttle down the throttle stick to the lowest position promptly if the aircraft is crashing or the rotor block down. Otherwise, the received circuit board will be damaged. POI Power Switch STEP STEP Se Sri rea aaa a ion at fy ay bo STEPS ffm he leapt sed pons rn va aang te okocp we her deer ron euse ice gutter [Amer unc cou even dae Peiae eee Ihe Pree PRIOR TO FLIGHT, PLEASE PRACTICE FIRST Dror to Ugh plonse prantlon feet 28's: fo anaei vouteall with e'pueretians Before tle well understood how to maneuver the please do not fy the R.C hell Please read instruction manual and keep practicin Cini the baste ying skis are mastered,
.put the R.C heli in an open area with its tail facing the player. 2 practice operating all the controlling sticks on the remote (see detailed operation in below picture) and repeat the practice for throttle sticks, L/R turning trimmer, and F/8 flying ot akan ou hoy S.practes forfilght is crucial pleake:keep, practicing until all the operations can be done on hearing the orders for each movement without thinking move left t cou go down
(Rudder) a Wrenn
TRIMMING ON THE FLYING to modify it adjustment on direction to fight 2.adjustment on flying forward and Sadiovard Woon tre hel takes of, leans forward/backward 3.adjustments on level turn 360 flip function operation manual 4.Slowly raise the throttle stick When the heli takes off, ft fies with turning leftright
{fittums tothe ight, tum the timer tits to the left, tum the trimmer trimmer
{fit leans forward, turn the trimmer down Ifitleans backward, turn the trimmer up When the heli takes off, if it leans to the ft ticans to the right, tum the trimmer
[fit leans to the left, turn the trimmer. toright|
2-Keep the UFO flying smoothly in the air. 3.Vertical pressing the right joystick once, after Beep. the quad.copter is ready to do 360flip, Now you can Push the right joystick to achieve front, back, left and Tight side flip. The right joystick will selt-return, Repeat above method to continue your fip fun. ACTIONS
(ur leigh) ifit Slowly push the throttle stick up till the hell flies off the ground. If the heli tits, trimmer can be utilized GC spinning to right sping tol eB
(forward/backward) e autoforward /': ~ auto-backward a aa auto-fiying leftside | auto-flyingrightside Vertical pressing the right top button then'Beep Beep... Changes or modifications not e, User's authority to operate the equipment. This equipment has been tested and found to. to Part 15 of the FCC Rul interference it ly approved by the party responsible for compliance could void the
; nicy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television re
, which can be determined sception, tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more the following measures:
= Reorient of relocate the receiving antenna.
~ Increase the separation between the equipment and receiver.
= Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. human injury danger, environment 1 2 5 6 LI-Po battery is comparatively more dangerous than other batteries. Please make Sunstallation and attention of USB chars Ee sure below instruction is carefully read and rigorously followed prior to using them. a Rene SS MODE ILLUSTRATION ATTOP shall not be responsible for any damages caused by improper operation of 4: Suitable for (3.7V) Li-polymer battery pack nae RG I ISSUES CAUSE SUGGESTIONS. the battery. The battery can only be charged by authentic ATTOP charger, otherwise it may lead to fire or explosion. Do not hit, disassemble, burn or connect them to the wrong pole. Avoid contact from metal or sharp item otherwise it may cause short circuit or fire. Be cautious when charging the battery and make sure it is within sight and beyond the reach of children to avoid any danger. Please do not charge the battery if it becomes when during usage. Otherwise it will inflate, deform or even cause fire which could cause property damage and personal injury. Please dispose abandoned batteries in accordance to the law and regulation of the corresponding region to prevent pollution to the environment. A\caution | staylaway iron HeatSource!
Most of the RC aircraft are made of PA fiber, plastic and electronic materials AS id therefore it should stay away from heat source, sun shine to prevent deformation even damage caused by high temperature. Arann Not todo it/atone ay This product is suitable for 14 years old or above. It is not easy to learn to fly 4 axle RC heli at the beginning, try not tofly it alone and make sure with A experience adult instructing, UI
Li-Po battery 3.7-450nAh os USB charger A AN (1) forward direction blade 1 backward direction blade "pes Head front 3,Operation steps 3.Charging statuses corresponding to LED seo operation a Connect te USB cabo to 1 | Beessee LeDisinred said | power on
| | serena LED redightson | chargna to USB cable LED is in red solid on Saturated 4.matters needing attention
(1) During harging the charger should be put in dry and ventilated place and far away from heat source and inflammable and explosive substance.
(2) Only used to charging 2S Lrion or Li-polymer battery pack if not, the charger or battery may be damaged,
(3) Never e ave the charger unsupervised during the process of charging n order to avoid risk of accidents
(4) Never immediately charge your battery pack as soon as the fight s finished , or when its temperature doesn't cool down otherwise the battery wil take ariskin swelling , even afr,
(5) Ensure the correctness of polarity before connection the battery to charger.
(6) Avoid drop and violence during the process of charging drop and violence wil resitin internal short circuit ofthe battery,
(7) Forthe sake of safety please use original charging equipment and battery pack please change new one in time when the fying time is becoming shorten due to long time usage
(8) Ifitis retained in the charger fora long time after saturated , the battery may automatically discharge. When the charger detects thatthe voltage of individual cells is lower than the rated voltage, it will e-charge Lnti saturated. Frequently charging and discharging will shorten the lifetime of your battery pack tis advised that please cut off the power and took of the battery after the charging is saturated, 5 Maintenance of battery pack
(1) The battery pack should be put in dry and ventilated place. The storage temperature of environment is ranged from 18C to 25C.
(2) Please avoid frequent charging and excessive discharging the battery pack in order to prolong its ie cycle.
(3) itis a must to maintain the battery pack before long-term storage. That is to charge the battery tothe level
(of 50-60% saturation,
(4) Ifthe storage term is over 1 month, itis advised to monthly check the voltage of every cel ofthe battery pack. The voltage of every cell should be not less than 3V. Otherwise, please refer tothe above article (3)
(5) From the view point of protection, new battery pack should be motivated before usage. That isto charge and discharg e 3-5 times, but discharge is not less than the level of 70% saturation. This process will make the battery iftime longer and voltage more stable. side fp Operating as below step 4 Start up the quad-copter: Switch on the remote,then connecting the copter power Shut off the quad-copter:Disconnecting the copter ,then switch off the remote.(make sure to insert the memory card in the socket of the copter) 2.After taking off and adjustment. the copter can start the camera function you can take picture and video and auto recording in the memory SD card. (Notes: Carema function is also working without taking off but base on the frequency adjustment is successful.) 3.Camera controlled button: The first button on lower right is for "Video" the second one is for picture. The LED light of copter flashing one time when taking a picture. The LED light of copter keep flashing when taking a video until you press again "video button finish this section,
(All the data will be recording into the memory SD card.) 4, Connect the USB data line with the USB socket on computer, after successful connection, ick "my computer, open the fle of "ini SD" then you can find and visit the videos and photos, sn by you. USB data line After the battery is inserted inthe heli, indicator light on receiver keeps flashing, no response to operations Frequency adjusting between remote and receiver not successful Readjust frequency for remote and receiver (please refer to P.6 for details) No response after battery is inserted in the heli
.check if the power for remote and receiver is on 2.check the voltage of the batteries of remote and receive 3.contact on the poles are hot good 4.open the transmitter and make sure if the battery is inserted in right position 2uuse a fully charged battery 3:reinstall the battery and confirm if the contact for the pole is 0 Motor does not run when operating the throttle stick and the indicator light on receiver keeps flashing Power for the Li-Poly batter is not enough Charge the battery or replace it with a full battery Main motor blade spins but heli won't fly Tithe blade has deformed 2 battery power is not enough replace the main blade 2.charge the battery or replace it with a fully charged battery Heli shakes a lot 41.main blade has deformed 2.main frame has deformed 4.replace the main blade 2 replace the main frame Turning trimmer has been tried but heli stil spins, speed to the right and left does not conform
.main blade has deformed 2.motor does not work wel replace main blade 2replace main motor Heli leans forward/backward Center on the gyro is not correct Turn on the heli and center the climbing and diving trimmer then restart the heli Itwon't fly after it falls down 41.motor has dropped off 2.gear has loosened 4.reinstall the motor 2itighten the gear Ed ro a eses| 2 | emer] a | He asey | s | beter | | ss, SS
[Main steet] | swede | 42| 2 blade *'
13] Lancing | 14] Uoht | 15 16 Camere 17 | Camera oho Materials, specifications for the parts website. indicated in the instruction manual areonly for reference, ATTOP will not be responsible for their changes in future nor could wenotify consumers. For any updates and changes, please refer to ATTOP and packing oO e
= 4G Ess