Suitable for 14 years old and above X: PACK 1 4 CH RC QUAD-COPTER
(LATEST 6-AXIS FLIGHT SYSTEM / 4 WAYS FLIPS) HEADLESS MODE
= The button can lock the flying direction, no matter
= what direction the head pointing, easy to control back the drone. Locking route button aN MAIN PARAMETERS:
Main blade diameter: 152mm Frame width: 226mm Frame length: 190mm Frame height: 73mm Battery: 3.7v800mAh Main motor type: 85x20 4pes Total weight: 1485826 Charge time: About 90 minutes Gyroscope: Builtin Flight tim 6-7 minutes MIAN FEATURES:
the 4 motors within the drone give the drone stable fight and enable it to perform the actiong easily 2: with the modularized structure, i's easy to install and convenient to disassemble for repair 3: with the 6 axis gyroscope and position control system automated, the drone can be easily stopped and accurately aloft This RC drone is not a toy, though it is just a mini RC 4 axle drone, it still could be dangerous. Please fly the model RC drone according to the manual instruction and its notices. Any modification, maloperation or unfamiliarity to the drone could bring about unexpected danger or accident, please be prudent NOTE: for any RC drone, neither manufacture nor dealers is responsible for any losses caused by maloperation or improper assembly or accidents owing to abnormal abrasion or inappropriate environment. This product is suitable for 14years old and above. Please only operate the drone in safety environment, once sold; ATTOP will not hold any responsibilities for property loss and personal injury caused by maloperation, disassembly and modification This model RC drone requires high operation skills and is consumable. After itspackage is opened and the drone is flown, varying degree of abrasions occur. Malfunction or dissatisfactory brought about during usage will not be entitled to replacement nor return. In case of operation and repair instruction, please contact ATTOP and our agencies for technical support and after sale service. R.C model and 4 axle drone are products with danger; it must be away ZXcAuTION |from the crowd when flying. Misassemble, defect, poor performance of the electronic control or improperoperation could lead to unexpected incident like plane damage or personal injury. Please pay altention to flight safety and make sure it is well understood that responsibility will fall on the player for accidents caused by himself. R.C. drone. is for indoor and outdoor use only, must stay
(Q0780081| Sway from obstacles when flying This product is suitable for indoor and outdoor (wind scale must be under 4) use only. for|
indoor, please make sure itis clear of obstacles; for outdoor, stay away from crowd and pets etc, do not fly it in improper environment,such as areas with heat source, power line and power source etc.otherwise, fire I) or electric shock, loss of fortuneor personalinjury could occur due to crash, emergency landing or entwining
(Srmeone The interior of drone consists of many precise electronic and mechanic components, therefore moisture and water must be prevented and it shall not be performed in bathroom or in rainy days to avoid breakdown of the components that may cause unexpected accident!
ames Stay away from damp conditions:
| Se Site BA oetere, Se ST BSE: LEP Batinty Gee Sppianey e-7 aunees Set EE See eR eee eee]
Paar Thanks for choosing ATTOP product! This is a 4 axle drone which is capable of flying in confined space and outdoor, in order for you to maneuver the R.C. drone more conveniently and easily, please fly it only after this instruction manual is carefully read, in the meantime, this manual shail be properly kept for future necessary adjustment and repair work. Suitable for indoor or outdoor which under Grade 3 winds. Please do not fly the R.C. helicopter under any specified forbidden environment. Zxwne Mistakes made due to negligence of these operation instructions may cause property loss and severe human injury Mistakes made due to negligence of operation instruction may cause danger 1 Please do not tear apart or modify the RC drone at will and only apply authentic ATTOP components to update, replace or fix RC drone to ensure|
its safety. Please only maneuver it within its limit. Any illegal purpose of use concerning its safety shall bestopped Attent ions to battery
(G oonce When install batteries, make sure the electric polarities are correct, do not mix new batteries with old ones. For long time storage, please take them ut to prevent battery leakage Please dispose abandoned baiteries in accordance to the laws and regulations of the corresponding region to prevent pollutionto the environment. Instruction Li-Po battery
(Sreenoal LI-Po battery is comparatively more dangerous than other batteries. Please make sure below instruction is carefully read and rigorously followed prior to using them. ATTOP shall not be responsible for any damages caused by improper operation of e battery, The battery can only be charged by authentic ATTOP charger, otherwise it may lead to fire or explosion. Do not hit, disassemble, burn or connect them to the wrong pole. Avoid contact from metal or sharp item otherwise it may cause short circuit or fire. Be cautious when charging the battery and make sure it is within sight and beyond the reach of children to avoid any danger. Please do not charge the battery if it becomes when during usage. Otherwise it will inflate, deform or even cause fire which could cause property damage and personal injury. Please dispose abandoned batteries in accordance to the law and regulation of the corresponding region to prevent pollution to the environment. Arouron Most of the RC drone are made of PA fiber, plastic and electronic materials therefore it should stay away from heat source, sun shine to prevent de harieibnas aciars tam arin Rosca bed Tihs tte cestihiine AS wha Stay away from heat source 1. Suitable for (3.7V) Li-polymer battery pack. 3.Operation steps 3.Charging statuses corresponding to LED ZXivenine | Nee aolitalane This product is suitable for 14 years old or above. It is not easy to learn to fly 4 axle RC Drone at the beginning, try not to fly it alone and make sure with experience adult instructing 3.STANDARD EQUIPMENT TE, 2) _ a, forward direction blade *tpes Li-Po battery 3.7 800nAh USB charger backward direction blade pes NOMENCLATURE anticlockwise clockwise Step operation LED status Charging status Connect the USB cable to LED is in red solid er er 1 | the comput BG Power on 2 _ | step: connect the baton in LED red light is off Charging SUSE able LEDs in red solid on | Saturated 4.matters needing attention
(4 During charging, the charger should be put in dry and ventilated place and far away from heat source and inflammable and explosive substance.
(2) Only used to charging 2S Lion or Li-polymer battery pack ifnot , the charger or battery may be damaged
(3) Never leave the charger unsupervised during the process of charging in order to avoid risk of accidents.
(4) Never immediately charge your battery pack as soon as the fights finished , or when its temperature doesn't cool down .otherwise the battery will ake a risk in swelling , even a fire.
(5) Ensure the correctness of polarity before connection the battery to charger.
(6) Avoid drop and violence during the process of charging drop and violence wil resutt in intemal short eireut of the battery.
(7) For the sake of safety please use original charging equipment and battery pack please change new one in time when the fying time is becoming shorten due to long time usage itis retained in the charger for a ong ime after saturated , the battery may automatically discharge When the charger detects thatthe voltage of individual cells is lower than the rated voltage, it ill e-charge Lunt saturated, Frequently charging and discharging will shorten the lifetme of your battery pack tis advised that please cut off the power and took off the battery after the charging is saturated. 5 Maintenance of battery pack
(C1) The battery pack should be putin dry and ventiated place. The storage temperature of environment is ranged from 18C to 25C.
(2) Please avoid frequent charging and excessive discharging the battery pack in order to prolong its ife cycle.
(3) tis a must to maintain the battery pack before long-term storage. That is to charge the battery to the level of 50-60% saturation
(4) Ifthe storage term is over 1 month, itis advised to monthly check the voltage of every cel of the battery pack. The voltage of every cell should be not less than 3V. Otherwise, please refer to the above article (3)
(5) From the view point of protection, new battery pack should be motivated before usage. That s to charge and discharge 3-5 times, but discharge is not less than the level of 70% saturation, This process will make the battery lifetime longer and voltage more stable.
@) Seco]
ip
(Power indicator light is red; low power is flashing slowly,and flashing fast when searching the frequency) The mode! is using the last six-axis gyro system and auto frequency adjusting system, normally the user don't need to adjusting the trimmer User can use trimmer when failed in auto-adjusting Pd 1.Start to fly:
@,Power on the Drone and place it on a flat ground or surface. Power on the Remote controller. Both indicator lights on Drone and Remote will flash, and push the left throttle to the toppest, then down to the lowest, after 2 secs, the indicators will go steady, that means already matching the frequency ILLUSTRATION ILLUSTRATION move left t sou move right goon Pe ymin
- s tum forward Backward \ Tight TRIMMING ON THE FLYING ACTIONS Slowly push the throttle stick up till the drone flies off the ground. If the drone tits, trimmer can be used to modify it
(forward Backward) ea) A a auto-forward auto-backward a auto-flying leftside auto-flyingrightside adjustment on flying forward and backward When the drone takes off, Ifitleans forward, turn the trimmer down Ifitleans backward, turn the trimmer up 2.adjustments on level turn When the drone takes off, Ifitleans to the right, tu the trimmer toleft If it Jeans to the left, turn the trimmer toright trimmer
(sideward fly) 360 flip function operation manual 4 slowly raise the throttle stick 2:keep the UFO flying smoothly in the air. 3. Vertical pressing the right joystick once, after Beep... the quad-copter is ready fo do 360flip. Now you can push hams rlatt icatick: tio saci laige teak: tack. tefl and rinht wide tis f *
2, Unlock the motors
@, Calibration is suggested (esp.for first play). Press the *Calibrationbutton to calibrate, until the light on drone steady.
, Push the left throttle to the lowest left, and meanwhile push the right sticker to the lowest ight, and the rotors of the drone start rotating, that unlock the motors. 3, Take off / Landing
|, After unlock the motors, press one key take off(or push up the throttle directly) , to fly.
, Press one key landing"(or keep pushing down the throttle directly), to land. The nght joystick will self-return. Repeat above method to continue your fip fun Vertical pressing the right top button then Beep Beep. Ww SZ ILLUSTRATION MODE ILLUSTRATION POX
(ett side tip)
#EX. 5 6 ISSUES CAUSE SUGGESTIONS After the battery is inserted in the heli, indicator light on receiver keeps flashing, ho response to operations Frequency adjusting between remote and receiver not successful Readjust frequency for remote and receiver (please refer to P. for details) 6 No response after battery is inserted in the Drone 4.check if the power for remote and receiver is on 2.check the voltage of the batteries of remote and receive 3.contact on the poles are ot good 1.open the transmitter and make sure if the battery is inserted in right position 2.use a fully charged battery 3,reinstall the battery and confirm if good contact with pol Motor does not run when operating the throttle stick and the indicator light on receiver keeps flashing Power for the Li-Poly batter isnot enough Charge the battery or replace i with a full battery it W tha Diacin han coed 7 ne nnn Attention: This aircraft is folding structure, please do open up all four blade before taking off. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. RF exposure statements: Section 2.1091(d) (3) - Mobile devices (a minimum separation distance may be required). e.g, This device must be used in fixed locations and in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter's radiating structure(s) and the body of the user or nearby persons. 7 2.charge the battery or replace itwith a fully charged battery heli won't ty enough
{main blade has deformed 2.main frame has deformed 1.replace the main blade 5 | Heli shakes a lot replace the main frame Turning trimmer has been tried but heli still spins, speed to the right and left does not conform
{.main blade has deformed 2.motor does not work wel J.replace main blade replace main motor Tum on the heli and center the climbing and diving trimmer then restart the heli swardbackward | Center on the gyro is not 7. | Heli leans forward/backward | Center 4,reinstall the motor 4.motor has dropped off 2:tighten the gear ttwontt fy after it falls down 2.gear has loosened Materials, specifications for the parts and packing indicated in the instruction manual areonly for reference, ATTOP will not be responsible for their changes in future nor could wenotfy consumers. For any updates and changes, please refer to ATTOP website