BELLSOUTH CORDLESS TELEPHONE 900 MHz FILTERED SOUND WITH 40 CHANNEL AUTOSCAN Model MH9006 OWNER'S MANUAL INSTALLATION AND OPERATING INSTRUCTIONS G@amsoumt PLEASE READ THIS MANUAL CAREFULLY BEFORE USE. KEEP FOR YOUR REFERENCE. For installation information, please a} 6 see Getting Started instructions 3 on page or your separate Quick Start guide. 1995, 1999 BellSouth Corporation Special Features proper care, and by following the setup and user instructions in this manual, this unit will provide you with years of trouble free service. BellSouth is committed to providing quality products that fit your needs. We would like to have any comments or suggestions you might have on this product. You may mail your comments to:
U.S. Electronics 105 Madison Avenue New York, NY 10016 When examining your new BellSouth cordless telephone, you wi array of special features including:
Filtered Sound System - Receives considerably less noise than conventional cordless telephones because of a special circuit which delivers the clearest possible reception. 40 Channel Autoscan - Press the QJ button on the HANDSET to find and lock on to the clearest channel for any call. Teiephone Number Storage - Store up to 10 frequently called numbers. Desk or Wail Mount - Use this equipment as a desk phone or as a wall phone. Tone or Pulse Dialing - Use this phone for either tone or push-button pulse
(rotary) di Automated Functions - Rediat the last number called, speed dial 10 numbers and automatic STANDBY mode. Security - Ensures greater privacy because a built-in security code with 65,536 combinations prevents use of your telephone line by another nearby cordless phone. Dependable Battery - Recharge your BATTERY PACK many times with the built-in charger. The battary low warning tone tells you when the BATTERY PACK needs recharging. (See page 18.) Speclal Services - Use the P button to access special services such as Call Waiting supplied by your telephone company or company switchboard. STANDBY Mode - When in STANDBY mode (ON-HOOK), the phone is capable of receiving a call. When the HANDSET is on the BASE UNIT, it is automatically in the STANDBY mode (ON-HOOK). When the HANDSET is taken off the BASE UNIT, it remains in the STANDBY mode until you activate the QE button. Battery Power Saver - Once fully charges STANDBY mode, and with the RINGER switch in the RINGER ON" position, the HANDSET can receive/send calls for a maximum of five days without the need for recharging. Length of charge depends on frequency of use. HANDSET Volume Controt Button - Select the receiver volume level (Hi, MID, LOW). C ongratulations on your selection of a quality BellSouth Product. With ind an ote Wall Mount Template. IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electric shock and/or injury, always follow these basic safety precautions when using your cordless telephone 1. Read and understand ail instructions. 2. Follow all wamings and instructions marked on the telephone. 3. Unplug this telephone from the wall outlet before cleaning or repiacing the BATTERY PACK, Do not use liquid cleaners or aerosol cleaners on the telephone. Use a damp cloth for cleaning. 4, Donot use this telephone neal a bathtub, wash bow, kitchen sink, or laundry tub, In a wet basement, near a swimming pool, or anywhere else where there is water. 6. Place thia telephone on a stable surface. Serlous damage and/or Injury may result :
if the telephone falls. 1 6. Do not cover the slots and openings on this telephone. This telephone should !
never be placed near or over a radiator or heat register. This telephone should not be placed In a built-In installation unless proper ventilation is provided. I 7. Operate this telephone using the electrical voltage as stated on the BASE UNIT or In the Owner's Manual. If you are not aure of the voltage In your home, consult your dealer or tocal power company. 8. Do not place anything on the power cord. Install the telephone where no one will step or trip on the cord. 9. Do not overload wall outlets or extension cords as this can increase the risk of fire or electric shock, 10. Never push any objects through the slots in the telephone. They could touch dangerous voltage points or short out parts that could result In a risk of fire or electric shock. Never spill liquid of any kind on the telephone, 11, To reduce the risk of electric shock, do not take this telephone apart. If service or repair work is required on this telephone, take it to a qualified service representative. Opening or removing covers may expose you to dangerous voltage or other risks. Incorrect reassembly can cause electric shock when the appliance Is used. 12. Unplug this telephone from the wall outlet and consult a qualified service representative in any of the following situations:
A, When the power suppiy cord Is frayed or damaged, liquid has been spilled Into the telephone. C. Ifthe telephone has been exposed to rain or water. D. Ifthe telephone does not operate normally by following the operating !
Instructions. Adjust only those controls that are covered by the operating Instructions, Improper adjustment may require extensive work by a qualified technician to restore the telephone to normal operation. E. ifthe telephone has been dropped or the case has been damaged. F._ It the telephone exhibits a distinct change in performance. Safety Instructions 13. Do not use the telephone to report a gas teak in the vicinity of the leak. 14, Never install telephone wirlng during a lightning storm. 15. Never Install telephone jacks in wat locations unless the jack is specifically designed for wet locations. 16. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. 17. Usa caution when installing or modifying telephone lines. SAVE THESE INSTRUCTIONS :
Battery Safety CAUTION:
To reduce the risk of tire or personal injury, read and follow these instructions:
1. Use only the following type and size of BATTERY PACK:
Cordless Telephone BATTERY PACK 3.6V, 600mAN U.S. Electronics Inc. Ni-Cd BATTERY PACK: Model B650.
(See page 18 for ordering information.) 2. Do not dispose of the BATTERY PACK in a fire. It may exptode. Check with local codes for possible special disposal instructions, 3. Do not open or mutilate the BATTERY PACK. Released electrolyte from a BATTERY PACK is corrosive and may cause damage to the eyes or skin. Electrolyte may be toxic if swallowed. 4. Exercise care in handling the BATTERY PACK to prevent shorting the BATTERY PACK with conductive materias such as rings, bracelets and keys. The BATTERY PACK or conductor may overheat and cause burns. 5. Charge the BATTERY PACK provided with (or identified for use with} this telephone only in accordance with the instructions and limitations specified in this manual. ATTENTION:
The telephone that you have purchased contains a rechargeable BATTERY PACK. The BATTERY PACK is recyclable. At the and of its usefut life, under various state and local Jaws, it may be illegal to dispose of this BATTERY PACK into the municipal waste stream. Check with your locat solid waste officials for details in your area for recycling options or proper disposal. a a rR &
10. 11. 12. IN USE/BATT LOW LED Indicat mode. Blinks when battery power
: Lights up when the HANDSET is in TALK low. (Ses page 18 for deta TALK Button: Press to answer an incoming call or to place a call. Press to end acall. TEMPORARY TONE (*) Button: Press to change the di TONE, VOLUME (VOL) CONTROL Button: Press to select the receiver votume level (HI, MID, LOW}, MEMO Button: Press to store phone numbers in memory oF to call a number you have previously stored. PAUSE Button: Press to inseri a pause whi ling. (You will need the (PAUBI button to dial numbers which use an alternative long distance access code.) HANDSET ANTENNA RINGER ON/RINGER OFF Switch: Set switch to RINGER OFF to disengage the ringer on the HANDSET. Switch to RINGER ON to engage the ringer on the HANDSET. CHANNEL (CH) SELECT Button : Press to change the operating channel when you hear interference. ig Mode from PULSE to FLASH Button: Press to answer an incoming call if you have Cail Waiting. REDIAL Button: Press to redial the last number you cafled. CHARGE CONTACTS: For charging the BATTERY PACK inside the HANDSET. We recommend cleaning the CHARGE CONTACTS periodically with a damp cloth. IMPORTANT eek auc LUU CB RC Raab lc] al BATTERY PACK. be sure to charge the HANDSET for 12 hours before initial use. Pep =
BASE UNIT Controls TONE/PULSE Select Switch POWER-IN CONNECTION JACK TELEPHONE LINE CONNECTION JACK ANTENNA; Raise or reposition for the best reception. IN USE/CHARGE LED Indicator: Lights up when the HANDSET is in TALK mode or when the HANDSET Is piaced on the BASE UNIT for charging. PAGE Button: Press to page the HANDSET. Press again to stop. CHARGE TERMINALS: For charging the BATTERY PACK inside the HANDSET, We recommend cleaning tha CHARGE TERMINALS periodically with a damp cloth, earns eta ea ESCs eect a Oe ees cee Cec Seng Dee ON RU cutee
= Getting Started Connecting Your Phone Bas This section is a reference gulde to the basic functions and operations of your cordless. BASE UNIT E UNIT telephone. For more detalled descriptions of the operations and features of this ANTENNA, telephone, refer to the Contents on page 1. 1. Carefully ramove your cordiass telephone from Its shipping carton. If there Is any TELEPHONE 120V WALL visible damage, do not attempt to operate this equipment. Return R to the place of JACK ourter purchase. 2. Check to be sure you have all Itams that come with this cordiess telephone system. You should have a HANDSET, BASE UNIT, AC ADAPTOR, MOUNTING BRACKET, TELEPHONE LINE CORD, SHORT TELEPHONE LINE CORD and * T CONNECTION COMME TON 0 OWNER'S MANUAL. JACK JACK TELEPHONE LINE CORD AC ADAPTOR 8. Install he BATTERY PACK by plugging It into the BATTERY CONNECTOR inside the BATTERY COMPARTMENT. | 4+ BATTERY PACK 9. Placa the BATTERY PACK inside the BATTERY COMPARTMENT. 10. Slide the HANDSET BATTERY bad COMPARTMENT COVER firmly into HANDSET BASE UNIT MOUNTING BRACKET Blace in Its closed post 11. TONE/PULSE Select Switeh:
A. Hyour home is equipped with a tone SS ne SHORT TELEPHONE dialing system, set the TONE/PULSE Select Switch to the TONE position. BATTERY B. Ifyou have a rotary dialing system, CONNECTOR set the TONE/PULSE Select Switch TELEPHONE LINE CORD LINE CORD AC ADAPTOR to the PULSE position, 3. Insert the small plug on the end of the AC ADAPTOR into the POWER-IN C. Ifyou are unsure which system you CONNECTION JACK at the back of the BASE UNIT. have, set the TONE/PULSE Setect 4. Plug the AC ADAPTOR into a 120V AC wall outlet. Switch to the TONE position. Press BATTERY AX USE ONLY WITH GLASS 2 POWER SOURCE 12V DG, 200mA. GEIS) bution on the HANDSET COMPARTMENT 5. Insert one plug of the TELEPHONE LINE CORD into the house TELEPHONE fone, and press any button COVER JACK and the other end into the TELEPHONE LINE CONNECTION JACK on the on the KEYPAD except the zero. Ifthe back of the BASE UNIT. (If you have an older 4-prong TELEPHONE JACK, you will dial tone continues, it means that you need an RU-11C TELEPHONE JACK ADAPTOR, This adaptor is available al the do not have tone dialing service. Press same place you purchased your talaphone.) the R) button on the HANDSET
, Raise or reposition the ANTENNA on the BASE UNIT for the best reception. to hang up. Set the TONE/PULSE 7. We recommend not placing this unit next to appliances. Doing so may cause Select Switch to the PULSE mode and interference. then try again, 12, ANTENNA HANDSET dial tone, review steps 3 through 11. If you stilt do not have a dial tone, refer to the Problem Solving section on page 20~21. Before initial use, charge the HANDSET for 12 hours. You are now ready to use your new BellSouth Cordless Telephone.
Wall Mounting Wall Mounting You may choose to put the BASE UNIT of your cordless telephone on a wall. tt With the back of the BASE UNIT facing up, connect the SHORT TELEPHONE LINE CORD to the TELEPHONE LINE CONNECTION JACK. Feed the SHORT TELEPHONE LINE CORD into the groove on the back of the BASE UNIT then insert the free end of the SHORT TELEPHONE LINE CORD through the hole of the MOUNTING BRACKET.
{nsert the hooks of the MOUNTING BRACKET into the matching slots on the back of the BASE UNIT (as shown below}. Then slide the MOUNTING BRACKET until it locks into place. Plug the free end of the SHORT TELEPHONE LINE CORD into the MODULAR WALL JACK. Align the upper keyhole of the MOUNTING BRACKET with the upper stud of the SHORT TELEPHONE LINE CORD TELEPHONE LINE CONNECTION JACK MOUNTING BRACKET BASE UNIT WALL PLATE STUD MODULAR WALL JACK WALL PLATE Basic Operation Preparing for Use Before you can use your cordless telephone, you must charge the HANDSET for 12 hours. Failure to do so will require recharging of the BATTERY PACK mare often. 1. Place the HANDSET on the BASE UNIT for 12 hours. 2. After 12 hours, remove the HANDSET from the BASE UNIT. 3. Raise or reposition the BASE UNIT ANTENNA for the best reception, Before yau can use your cordiess telephone, you must charge the HANDSET for 12 hours. Failure to do so will require more frequent charging of the BATTERY PACK. See page 18 for more information on the BATTERY PACK. NOTE:
Depending on the frequency of use, once the HANDSET is fully charged, It remains functional for approximately 4 hours of continuous use and approximately 5 days when the HANDSET is off the BASE UNIT in STANDBY mode, ere The AC ADAPTOR must always be ptugged io an electrical outlet. t The IN USE LED indicator will light up. NOTE: The HANDSET RINGER ON/
RINGER OFF switch must be in the RINGER ON ps 2. Start your conversation. 3. To end your conversation, either press the aRO button or place the HANDSET on the BASE UNIT. If you place the HANDSET on the BASE UNIT charge cradle, you activate the automatic STANDBY feature. Receiving Calls with the HANDSET off the BASE UNIT 1. When the phone rings, press the @TAEK) button. The IN USE LED indicator will fight up. 2, Start your conversation. 3. To end your conversation, either press the CFAKI) button or place the HANDSET on the BASE UNIT. If you place the HANDSET on the BASE UNIT charge cradie, you activate the automatic STANDBY feature. NOTE: The BASE UNIT has no ringer and does not ring when receiving an incoming cal. NOTE:
Ifyou are too far away from the BASE UNIT, the HANDSET emits beep sounds to wam you that the background noise level is too high for proper communication between the HANDSET and the BASE UNIT. When you hear this sound, you should move closer to the BASE UNIT to reduce tha noise level. Otherwise, the call will automatically cut off. Ry Kolar MA tts Led Storing Numbers button. The IN USE \ ee 1, Be sure the BASE UNIT IN USE LED indicator is off and the HANDSET is in ight up. 2. STANDBY mode (See Spacial Features Section). Press the GMEM@) button. Diat the number you want to store. Press the (MEMO) button again. Diat the index number (0-9) where you want to store that number, You will hear one confirmation beep. 2, Listen for a dial tone. 3. Dial the phone number. gee 6. Write the name of the person you will be calling with that number next to the
| corresponding index number on the Telephone Number Card. it a busy tone, press the utton fo hang up, 2, Later, press the GFA) button again. 3. Usten fora dial tone. BIKE) button. This will I the last telephone number you called. 7. Repeat steps 1 through 6 for other telephone numbers. EXAMPLE : To store the number 703-1968 under the index number 1 on the KEYPAD:
1- Press the Gi 4- Press 1 onthe KEYPAD, 4. Press the 2- Dial 703-1968, 5- You have stored 703-1968 under button 7 on the KEYPAD. 3- Press the GHEMO) button again. VOLUME Control You could change the HANDSET i SPEAKER VOLUME to your comfortable BD level. Press and release the
@YOL) button to change the SPEAKER UME to HIGH, MID, or LOW. A total of 10 telephone numbers can be programmed in memory. IMPORTANT: The maximum number of digits that can be stored for any phone number is 16 in PULSE or TONE mode. The maximum number of digits for mixed (TONE and PULSE In combination) dialing is 15. if you arg using a switchboard system to access an outside line (such as an 8 or 9), press the (BAUSE) button to store a PAUSE. IMPORTANT When you hear interference, press the GD Deke Ce Genesee Ree us
Security Recalling Stored Numbers Security System from Memo! Your cordless telephone uses a digital coding security system to prevent ry unauthorized use of your telephone line by another nearby cordless telaphone. The system has its own identifying signal created by microcomputers in both the BASE UNIT t andHANDSET. 2 3. Press the index number for the . number you have stored. The stored Security Code number willbe dialed automatically. This telephone has an internal security code with 65,536 possible combinations. EXAMPLE: To recall number 703-1968 stored under button 1 on the KEYPAD: Resetting Security Code and Channel information ition between HANDSET and BASE UNIT may not be possible in any of the
- Press th . Gommuni cation following situations:
~ Press the MEMO) button. 1. After a power failure.
- Dial 1. 2, After relocating the BASE UNIT by disconnecting the AC ADAPTOR. 3. After replacing the HANDSET battery. To reset, place the HANDSET on the BASE UNIT for 2 to 5 seconds. Multi-Channel Access Your cordless telephone [ets you select a channel from the 40 frequencies available to tvansmit signals between the BASE UNIT and HANDSET. When you notice interference trom other cordless telephones, change to another channel by pressing the (GH button on the HANDSET. IMPORTANT etme lB cae ol oT Rs ote Rts] A el EN LS La Recharging the BATTERY PACK Changing the BATTERY PACK Battery Type Changing the BATTERY PACK Use the following type and size of BATTERY PACK: The BATTERY PACK provides power for the HANDSET of your cordiess telephone. Cordless Telephone BATTERY PACK 3.6V, 600 mAh & To Replace the BATTERY PACK:
U.S. Electronics Inc, 1. Remove the HANDSET BATTERY COMPARTMENT COVER by sliding it down. ;
2. Pullout the BATTERY PACK PLUG and remove the BATTERY PACK, rent een ne tt 3. Plug the new BATTERY PACK into the BATTERY CONNECTOR. 4. Silde the HANDSET BATTERY COMPARTMENT COVER firmly into place in its closed positlan, 5. Before use, charge the new BATTERY PACK for 12 hours. Ni-Cd BATTERY PACK: Model B650 Ni-cd This BATTERY PACK Is avatlable through:
U.S. Electronics Service Center 105 Madison Avenue New York, NY 10016 1-800-828-5208 ATTENTION:
|The product that you have purchased contains a rechargeable BATTERY PACK. The , Recharging the BATTERY PACK BATTERY PACK is recyclablo, At the end of its useful life, under various state and local ;
The nickel cadmium (Ni-Cd) BATTERY PACK in the HANDSET can be recharged many Ree ee a ee rete or details vet ee rar a Wasie eiroam. Tee ctina ite tulth ureter inthe BASE UNIT Check nih your la sos waste ofa for dtl your area fo eyeing epson or When the BATT LOW LED indicator starts to blink rapidly, a beep sound will be heard every 12 seconds. This sates that the BATTERY PACK needs to be recharged. Charge the BATTERY PACK at least once every 90 days of non-use to avoid battery failute. When the BATTERY PACK can no longer be charged, replacement of the BATTERY PACK will be necessary. oo S The BATTERY PACK used in your telephone may develop a condition known as MEMORY. Once subjected to a regular short discharging routine, the battery assumes the discharging pattern it was subjected to. This is known as a MEMORY condition which causes rapid discharging thereby shortening the BATTERY PACK charge span. If you believe your BATTERY PACK has developed a MEMORY condition, de not charge the HANDSET until the BATT LOW LED indicator comes on. When it does come on, charge the HANDSET fully for 12 hours, BATTERY CONNECTOR 7 BATTERY COMPARTMENT COVER BATTERY PACK PLUG BATTERY PACK IMPORTANT MMe aCe CACAO CNA ae LeU) PNP -a Umass Remove the HANDSET BATTERY COMPARTMENT COVER by sliding il down, Problem Solving Section For your agsistance, we have listed below a few common problems. Phone does not work, check the following:
1. BASE UNIT Is plugged into power source. 2. HANDSET Ia charged. 3. TONE/PULSE switch is in the right position. 4. TELEPHONE LINE CORD is plugged Into the TELEPHONE JACK. Range of phone limited, check the following:
1, ANTENNA on BASE UNIT Is raised, 2. BASE UNIT is centrally located in your residence. 3. BASE UNIT is not located near appliances. No dial tone, check the following:
4. TELEPHONE LINE CORD plugs are connected to the TELEPHONE JACK and TELEPHONE LINE CONNECTION JACK. 2. BASE UNIT Is plugged tnto power source. 3. Ifyou had a power failure or had unplugged the BASE UNIT, replace the HANDSET on the BASE UNIT for 2 to seconds to reset the system. Received signal flutters or fades, check the following:
1. BATTERY PACK in HANDSET is fully charged. 2. HANDSET is not too far trom the BASE UNIT. 3. ANTENNA on BASE UNIT is raised. interference on reception, check the following:
1, Noise may be picked up from electrical products in the home or electrical storms. Generally, this noise is a minor annoyance and should not be interpreted as a defect in your systam. (See Technical information on page 22). 2. Choose an alternate channel using the button on the HANDSET. 20 Laker timere) A AItTe]
Excess static, check the following:
1. Check to see that the ANTENNA Is not touching another metal object. 2. Raise or reposition the BASE UNIT ANTENNA. Hf after pressing the GALK) button, you recelve three beeps and no dial tone, check the following:
1. BASE UNIT Is plugged into power source. 2. Wyou had a power failure or had unplugged the BASE UNIT, raplace the HANDSET on the BASE UNIT for 2 to 5 seconds to reset the system. NOTE: If none of the telephones in the house are working, disconnect one set at a time to verify that none of the telephones are causing the problem. If you still have a problem after doing this, and your telephone sth does not work, please contact your focal phone company. eer When you hear interference, press the GD Perea ee kere eae Technical Information Technical Information This cordiess telephone uses radio frequencies to allow mobility. There are certain difficulties in using radio frequencles with a cordless telephone. While these are normal, the following could affect the operation of your system, Nolse Electrical pulse noise is prasent in most homes at one time or another. This noise is most intense during electrical storms. Certain kinds of electrical equipment such as light dimmers, fluorescent bulbs, motors, and fans also generate noise pulses. Because radio fraquencies are susceptible to these noise pulses, you may occasionaily hear them in your HANDSET. Generally they are a minor annoyance and should not be interpreted as a defect in your system. Range Bacause radio fraquency is used, the location of the BASE UNIT can affect the operating range. Try several locations in your home or office and pick the one that gives you the clearest signal to the HANDSET. interference Electronic circuits activate a relay to connact the cordless telephone to your telephone line. These electronic circuits operate in the radio frequency spectrum. While saveral protection circuits are used to prevent unwanted signals, there may be periods when these unwanted signals enter the BASE UNIT. You may hear clicks or hear the relay activate while you are not using the HANDSET, If the interference occurs frequently, it can be minimized or eliminated by lowering the height of your BASE UNIT ANTENNA or by relocating the BASE UNIT. You can check for interference before selecting the final BASE UNIT tocation by plugging in the phone. NOTICE:
This cordless telephone uses radio communication between the HANDSET and the BASE UNIT and may not ensure privacy of communication. Other devices, including other cordless telephones, may interfere with the operation of this cordless telephone or cause noise during operation. Units not containing coded access may be accessed by other rac communication systems. Cordless telephones must not cause interference to any licensed tadio service, ey Sy FCC Requirements Federal Communications Commission Requirements This equipment complies with Part 68 of the FOC Rules. A label on the BASE UNIT of this equipment contains, among other information, the FCC Registration Number and the Ringer Equivalence Number (REN) for this equipment. You must, upon request, provide this information to your tetephone company. The REN Is atso useful in determining the quantity of devices that you may connectto your telephona {ine and still allow these devices to ring when your telephone number is called, In most areas, but not all, the sum of the RENs for all devices connected to one line should not exceed five (6.0). To be certain of the number of devices that you may connect to your line, you should contact your local telephone company, If your equipment should cause harm to the telephone network, the telephone company may temporarily disconnect your service, If possible, they will notify you in advanced that temporary discontinuance of service may be required. Howaver, when advanced written notice is not possible, the telephone company may temporarily discontinue service without Notice if such action is necessary under the circumstances, The telephone company may make changes in its communication facilities, equipment, operations, or procedures where with the rules and regulations of the Federal Communications Commi attempt to repair or modify this equipment. WARNING: Changes or modifications not expressly approved by the party responsible for its compliance could void the user's authority to operate the equipment. Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the BASE UNIT of the cordless telephone should not be placed on or near a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference. This equipment should net be used on coin telephone fines, Connection to party line service Is subject to state tariffs. If trouble is experienced, disconnect this equipment from the telephone line to determine if it is causing the malfunction, If the equipment is determined to ba malfunctioning, its use should be disconnected until the problem has been corrected. eer a Tee eens MCC MCR RSE eae SPOS oh Se a rasa Ue HANDSET for 42 hours before initial use. Federal Communications Commission Requirements (continued) NOTE: This equipment has been tested and found to comply with the limits for a class i device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that It this can be determined by turing the equipment off anc on, the user is encouraged to try to correct the interference by one or more of the following measures. 4. Reorient or relocate the receiving ANTENNA. 2. Increase the distance between the equipment and the receiver. 3, Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. Warranty Warranty information BellSouth Products One-Year Limited Warranty This limited warranty sets forth all BellSouth Products responsibilities regarding your product. There are no other expressed or implied warranties from BellSouth Products. Warranty Service Provided f you purchased the telephone new from a retall vendor, BellSouth Producte warrants the telephone against defects in material and workmanship for a period of one (1) year from the original date of purchase, This warranty is in lieu of all other expressed warranties. This warranty begins when you purchase the telephone and continues for one (1) year unless you sell or rent the telephone, in which case the warranty stops. BellSouth Products disclaims any implied warranty, including the warranty of merchantability and the warranty of fitness for a particular purpose, as of the date of 20 days from your original purchase of the telephone. BellSouth Producta assumes no responsibitity for any special, incidental, or consequential damages. This warranty gives you specitic legal rights and you may have other rights which vary from state to state. Some states do not allow the exclusion or limitations of special, incidental or consequential damages, or limitations on how long a warranty fasts, go the above exclusion and limitation may not apply to you. Warranty Service Not Provided This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable cara, unauthorized modification, the affixing of any attachment not provided by BellSouth Products with the telephone and/or toss of parts. This warranty Is voldad in the event any unauthorized person opens, alters or tepairs the telephone. All BellSouth equipment being returned for repair must be suitably packaged, Telephone companies use different types of equipment and offer various types of services to customers. BellSouth Products does not warrant that this telephone is compatibfe with the type of equipment of any particular telephone campany or the services provided by it, Eerie What to Do for Warranty Service During the first thirty (80) days, a defective product is eligible for over-the-counter exchange at the retailer from whom it was purchased. After thirty (30) days, the defective product should be returned to the authorized service center. Please allow 2-3 weeks for the return of your telephone product. The shipping address of the authorized service center Is:
U.S. Electronics CONSUMER CENTER C/O Southern Bonded Warehouse 1491 Mt. Zion Rd. Morrow, GA 30260 NOTE: A product received which was not made for BellSouth Products or not defective as determined by our test procedures will not be repaired and retumed .0.D., freight. his be To Obtain Warranty Service Provide proof of the date of purchase within the package.
* Prepay ail shipping costs to the authorized service center,
+ inciude a retum shipping address within the package. Please retain your sales receipt, the carton, the packing materials, and the printed material. The original carton is the best shipping container for the telephone should you have to return It. For your reference:
Serialnumber Date of Purchase Name of Dealer Customer Service Telephone Number:
1-800-210-8950 OUTSIDE THE U.S.A. CALL 1-212-242-6978 Ea 1. This page serves as a template for attachment of screws to the wail when mounting this telephone on the wall. Cut out this page, Use this template to determine the distance between screws when mounting this phone on the wall. The two cross hairs identify where to attach the screws. IMPORTANT TRC Cet Nae IMPORTANT CoE Rental) ha ec Pee) button to IMPORTANT The AC ADAPTOR Peters]
Teens IMPORTANT ane etre ase IR Reges rena) ise Nish eles
(ERE neces ees eet aTt ee aucun is tet) Pete ake Serre ances oid Make certain you receive the best performance from your telephone. Read this manual first.
@ BELLSOUTH MHB008VA, Made in China