14+
CHEERSON Instruction Manual NO.CX-30W(RIC Version)
( WIFI ) Available on the App Store Please read this instruction manual carefully before flying operation:
5. WIFI Control & Operation Pee eh eee eid Load the batteries in the transmitter as per the picture shown. 4.WIFI connection. 3.Decoding of the 4, Operatin:
4.Manual flying 2. Instruction of the Control Interface:
& Mobile Control Operation Gravity Sensor Right-side flying 3. Function setting Advanced Setting
(Defaulted) =
(4) Steering Co the head of the 5.Basic flying operation High/Low Speed Mode Backward Low Speed Mocle|
Medium Speed Mode High Speed Mode
/from any other signal source of WIFI environment Landing Left side-
fl trimming ight side ng trimming Nose of the aircraft the al When the Gravity Sensor is in the state of ON ITS * ay
.on for Gravity Sensor control switch key shows Colorful, ind aileron control has already been switched into Gravity ime the direction 6. Charging of the aircraft ion Push forward as per the arrow direction indicated.
(Load into the WIFI Module) can not search the WI-FI, please close the WI-FI and then you need to replace the batteries, ol software and then select the cor
| successfully connecting It, please re-start this software. 1e maximum control radius of the WI-FI is 25 meters. Please DO NOT beyond this scope. Push to the right as per the arrow direction indicated. disassemble the WIFI Module) Calibration of the aircraft to the aircraft. ist the High/Low Gear the position of High while Left/Right control the same time to the right down corner. Wait till the Ihen calibrating the aircraft, please o place it on the level surface. Appendix:changes or modifications not expressly approved by the party rhis equipment has been tested and found to comply a Class B digital device, pursuant his equipment does cause harmful ision reception, which can be determined by off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
~ Reorient or relocate the receiving antenna.
~ Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the recelver is connected.
= Consult th Le prser 9t confor aux apparel exempts, conditions sulvantes :
Operation is subject to the following two conditions: (1) this device may not cause harmful Interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment must bs installed and operated in accordance with provided inst
}# and the antenna(s) used must be inst. gin conjunction must be conditions for satisfying RF exposure compliance.