PVN uss oLa om)
) Use instruction
= Thank you for choosing our toy RIC car,To ensure correct andenjoyable use ,please read through the following use instruction and have enough understanding of the product before use. A\ caution:
BATTERY OPERATED PRODUCT Suitable for ages 6+. As with all electric products,precautions should be observed during handling and use to prevent electric shock Peaches 1. Tum the switches located on both the car and the controller to the "OF Fposition.(if has switch) 2. Open the battery cover using a crosshead screwdriver. 3.Insert the batteries follow the picture below. 4.Close the battery compartment. Daag 1. Tum the switches located on both the car and the controller to the "ON position. 2.Then operate the car. 3.When your RIC model car begins to lose performance, power or function it may be time to charge the batteries!
an USES 4x1.5V"AAABATTERIES USES 2x1.SV"AABATTERIES
(EXCLUDED) (EXCLUDED) Tee eed Picture 2 Two rockers of remote control are pulled down and the car moves backward, Two rockers of remote control are pushed upward and the car moves forward. The lef rocker is pulled down and the left whee! rolls forward Picture 6 Two rockers of remote control are pulled down and the car moves backward.The right rocker is pushed upward and right wheel rls backward, The left rocker ofthe remote control is pushed upward, the right rockers is pulled down and the car spins around. The let rocker of the remote controls pulled down,the right rockers is pushed upward and the car spins around, Picture 7 Picture 8 The let rocker ofthe remote contol e pushed upward The right rocker ofthe remate cantrl is pushed upward andthe let whee! moves and spins othe right. {and the right wheel moves and spin to the lf. Picture 9 Eee aac ad 41. Don't short-circuit terminals, 2. Don't recharge non-rechargeable batteries. 3. Rechargeable batteries may only be charged under the supervision of an adult. 4, Different types of batteries or new and used batteries are not to be mixed. 5, Dispose of batteries safley. Don't dispose of batteries in fire as they may explode. 6. The battery charger used should be regularly examined for damage to the cord, plug,enclosure and othe parts, In the event of damage do not use it unti it has been repaired. 7. Exhausted batteries are to be removed from the toy. 8, Keep these instructions for future reference:they contain important information. 9, Packaging has to be kept since it contains important information 410. Rechargeable abtteries are to be removed from the toy before being charged. ee U Cue}
1. Always remove batteries from the toy when itis not being used for a long perion of ime. 2. Wipe the toy gently with a clean damp cloth. 3. Kppe the toy away from direct sunlight and7ordirect haat. Pay attention to 1. In the case of insufficient power, the flipping function will be lost during playing. 2. Please do not run on the smooth ground, otherwise the flipping function will be lost during playing. 3. The battery of the car should use the alkaling battery. GUANGDONG CREATIVE DOUBLE STAR TECHNOLOGY CO.,LTD Address:Double Star Building ,north of Nancheng Road, Lianxia ,Chenghai, Shantou Guangdong,China Tel:86-754-85160487 85173487 Fax: 86-754-85169487 E-mail:sx01 @shuangxingtoys.com QQ:792414861 changes or modifications not expressly approved by the party responsible for compliance could voidthe user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency eneray and, if not installed and used in accordance with the instructions, may cause hannful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver. Connectthe equipmentinto an outlet on a circuit differentfrom thatto which the receiver is connected. Consultthe dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.