FCC ID: 2AYJFI18 Watch Phone

1. Package and Product Parameters 2. Device Layout 3. Choose and Install the SIM 4. Power On 5. Download the App & Bind the Watch 6. Charge 7. OTA Upgrade 8. Basic Operation Package Contents:

Watch Face:

Watch Back:

Lock Button Front Camera Speaker Touch Screen Rear Camera SIM Card Deck Charging Contactor On/Off Mic Step 1: Choose the Right SIM Card The Size of SIM Card: supports Standard Nano-SIM card only [as picture (1)].

(1) Step 2: Activate Caller ID function & data plan Please activate Caller ID function and enable GPRS data network. Base Step 3: Install the SIM Card Power On: Press On/Off button for 2 seconds to power on the watch phone. Watch Phone Z6 Charging Cable Manual SIM Card Picker 1 1 1 1 Product Parameters:

Product: Watch Phone Model: W1818AO Battery: Lithium Polymer Battery 3.85V 680mAh Camera: Front Camera 5MP, Rear Camera 8MP Charge Input: DC 5V 1200mA Working Temperature: 0~35 Working Humidity: Noncondensable 15%~93%

Material Code: 5211764 Version: V1.0 1. Open up the SIM card deck with a SIM card picker. 2. Put the Nano-SIM card on the card deck with the gold chip facing upward. 3. Insert the SIM card deck into the watchs back. 1. If the new watch cannot be turned on, it is probably out of power. Please plug in the charging cable until the watch is turned on automatically. 2. For general abnormal conditions (e.g., blank screen), press On/Off button for 10 seconds to restart the watch phone. Bind Code Chat Add Friends Steps Step 1: Download/Install the App 1. Scan the QR code on the right. 2. Go to Google Play or Apple App Store and search for imoo or Watch Phone to download the App. Step 2: Bind the Watch 1. Open the App, register or log in. 2. Slide the watch interface to nd Bind Code and scan the QR code or enter the bind code manually to bind the watch. Get the Bind Code:

1. Tap Bind Code on More interface to get the bind code. Bind Code 2. Scan the QR code or enter the Bind Code manually. 1. As shown below, please ip up the watch through the lock button to nd the charging contactors of the watch. 2. Then align the charging contactors on the watch with the charging contactors on the charging cable until Charging is shown on the screen. Charging... (90%) When binding a watch, the App will detect the watch's version to check if it needs to be upgraded. If needed, the watch will be upgraded automatically when charging. Charging System Updating... Remark: There may be risks for informal root or system upgrade. FCC SAR statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). T hese requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body Turn on the screen: Tap the screen or press On/Off button to turn it on. Turn off the screen: 1. Press On/Off button to turn off the screen when the home screen is on;

2. Cover the screen with your hand to turn it off;

3. You can set the Screen Timeout in Display &

Brightness of the Watch Settings on More interface. When the time is up, the screen will be turned off. Wallpaper:

Long press the home screen to enter Wallpaper. Slide left or right to view more and select one as your wallpaper. Slide left from the home screen to enter More interface, slide up or down to choose corresponding features. Users Data Warranty Data Product Data Warranty Card

(The First Invoice: User Invoice) Warranty Card

(The Second Invoice: Sales Invoice) Users Name: _______________ Telephone: ____________ Users Name: _______________ Telephone: ____________ Kids Grade: ___________ Kids Grade: ___________ Name of Sales or Service Center: _________________________ Cause of Machine Repair: _____________________ Handled by: ________________ Telephone: ____________ Handled on: _______________________ (DD/MM/YYYY) Name of Sales or Service Center: _________________________ Cause of Machine Repair: _____________________ Handled by: ________________ Telephone: ____________ Handled on: _______________________ (DD/MM/YYYY) Product Model: ________________________ Product Model: ________________________ Machine No.: __________________________ Machine No.: __________________________ Date of Purchase: ______________________ (DD/MM/YYYY) Date of Purchase: ______________________ (DD/MM/YYYY) Site of Sales: ____________ (Store) ______________________ _________________________________ (Address) Site of Sales: ____________ (Store) ______________________ _________________________________ (Address) Users Data Warranty Data Product Data 1 2 3 4 5 6 7 8 Product Model & Machine No.:

Product Model & Machine No.:

9. Basic Features 10. Statements 11. Attentions Slide right from the home screen to enter Call. Chat Family Chat Add Friends Bind Code Chat Add Friends Steps After entering each feature, you can slide right to exit the feature, as shown on the left. You can also press the On/Off button to go back to the home screen. Slide right from Chat interface. Go back to More interface. Slide from top to bottom to check the status bar and some important push notications. HD

Mum Sister Chat Family Chat Add Friends Call Select a contact to make a voice call or video call. Video calls may consume a lot of network data. We suggest you make video calls when connected to a WLAN network. If the App cannot receive the video call, please check whether Notications has been enabled or whether the call was intercepted by the system. Chat Send voice messages: Tap Hold to Talk to record, and release your nger to send your voice message. Play voice messages: Unread voice messages will be shown on the screen. Tap to play voice messages. Add friends: Tap Face-to-face Making Friends on Add Friends interface. Then you can add a friend by bumping your watches together after you nd a friend. Wi-Fi After binding your watch, enter More-Watchs Wi-Fi on App to add a network. Tap to shoot Take Photos Tap the watch screen to take a photo. If you want to switch to outdoor shooting, please ip up the watch face. Besides, you can switch cameras by sliding up or down on the interface. Video Tap Start to record a video. Tap the corresponding icon to switch cameras or view the saved videos or photos. Start Bluetooth Bluetooth headsets can be connected to the watch. You can use Bluetooth headsets to make a call. On More interface, tap Watch Settings and choose Bluetooth to enable or disable Bluetooth. Please read this manual carefully so that you can use this product correctly and safely. Please use the watch strap that is well matched with this product to avoid affecting the watchs antenna signal. The use of other straps may result in poor call quality and locating failure. This product is equipped with GPS locating, which is disabled until the watch is bound. Users can use GPS to locate the watchs location. This product is not equipped with the monitoring feature. This manual contains important information, which should be kept properly. Go to https://imoo.com/e-manual/ or scan the QR code below to review more details or download the electronic version of the manual about this product. Please read the following contents and attentions carefully before using this product, and abide by them when using it. We bear no liabilities for the consequences caused by the failure in using this product correctly or abiding by the relevant instructions of this product. Attentions for Operation Place and Environment:

Any radio transmission device (including this product) may interfere with the medical device that is not properly protected and please observe the relevant regulations of the places where wireless transmi-

ssion of electronic equipment is prohibited. Pacemaker and implanted cardioverter debrillator: Keep the distance between the watch and the instrument greater than 6 inches (about 16cm) each time you turn on your watch. Do not put your watch in your clothes pocket. Please use the watch on the other side of the instrument to reduce potential interference. If you suspect that inter-

ference has occurred, turn off your watch immediately. Hearing aids and implanted cochlea: Some wireless digital devices may interfere with some hearing aids or implanted cochlea. If this type of interference occurs, please contact the manufacturer to nd a solution. For other medical equipment, check with the manufacturer to conrm whether the surrounding RF signals can be adequately shielded. You can also consult your doctor for the relevant information. Attentions for Charging and Battery Use:

The volume of the watch decreases gradually as the voltage decreases. Due to the consideration of environmental protection, this product is not equipped with a power adapter. You can use the USB interface of your computer or the power adapter with CE certication to charge. And the output voltage and current of the power adapter should conform to the following specications: output DC voltage: 5V; output DC current: No less than 1200mA. Statement of Water Resistance:

The water resistance level of the watch reaches 20 meters of the ISO 22810: 2010 IDT. It can be used for shallow-water activities (e.g., swi-

mming in a pool), but it cannot be used for diving, water skiing, or other activities involving high velocity ow or exceeding the specic depth. Specic Absorption Rate (SAR):

CE SAR 0.49W/kg (Front to face) 1.29W/kg (Wrist Worn) Tech Generation Sdn Bhd Email: service@imoo.my (Malaysia) sevicesg@imoo.com (Singapore) Website: www.imoo.com Hotline: 1800-22-7778 The image shown is for illustration purpose only. Important: Information stated is important for successful application and understanding the product. We recommend you to keep this guide for future reference. FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. CMHK 9 10 11 12 13 14 15

a) b) c) d) e) f) g) SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name GUANGDONG GENIUS TECHNOLOGY CO., LTD. No.168, Middle Road Of East Gate Xiaobian Community,Chang'an TownDongguan City, GuangdongChina Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name Senhua Huang 2AYJF 2AYJFI18 hshua@eebbk.com 0769-85540888 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date:4/20/2021 Print Name:

Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Senhua Huang Manager Applicant Declaration Rev:0.0

GUANGDONG GENIUS TECHNOLOGY CO., LTD. TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Confidentiality Request regarding application for FCC ID: 2AYJFI18 Regarding:

LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Part List Tune up procedure The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 0 days from the grant date, whichever is less. If the device is marketed within 0 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. Delete any document that is NOT included in your application External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Senhua Huang Signature:

On behalf of Company: GUANGDONG GENIUS TECHNOLOGY CO., LTD. Telephone: 0769-85540888 E-mail: hshua@eebbk.com Title: Manager

GUANGDONG GENIUS TECHNOLOGY CO., LTD. Date: 4/20/2021 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AYJFI18 To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with GUANGDONG GENIUS TECHNOLOGY CO., LTD. This authorization is valid until further written notice from the applicant. Print Name: Senhua Huang Signature:

On behalf of Company: GUANGDONG GENIUS TECHNOLOGY CO., LTD. Telephone: 0769-85540888 E-mail: hshua@eebbk.com Title: Manager

GUANGDONG GENIUS TECHNOLOGY CO., LTD. We, GUANGDONG GENIUS TECHNOLOGY CO., LTD. declare that this EUT (FCC ID: ) doesnt have ad Hoc Mode function on US/Canada frequencies. In addition, the frequency selection feature is disabled by firmware for devices marketed to the US/ Canada. For DTS part of this device, only channels 1-11 will be used in North America. Country code selection is disabled. Should you have any questions or comments regarding this matter, Please have my best attention. Sincerely yours, Print Name: Senhua Huang Signature:

On behalf of Company: GUANGDONG GENIUS TECHNOLOGY CO., LTD. Telephone: 0769-85540888 E-mail: hshua@eebbk.com Title: Manager