FCC ID: 2A7Q8-GF-800-200P Inline Fan

Federal Communications Commission Notice This device complies with part 15 of the FCC following two conditions: (1) This device may not cause harmful i

(2) this device must accept any i may cause undesired operation. nterference, and Rules. Operation is subject to the nterference received, including interference that Any Changes or modifications not expressly approved by the party compliance could void the user's authority to operate the equ responsible for ipment. nce in a Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfere residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance w ith the instructions, may cause harmful interference to radio communications. However, llation. If there is no guarantee that interference will not occur in a particular i nsta this equipment does cause harmful interference to radio or television re ception, which can be determined by turning the equipment off and on, the u encouraged to try to correct the interference by one or more of the measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. ser is following the Check that Iha mains supply vollaeand frequency values coi ncida with the stipulations The electrical on the characteristics plate. install ation must include cleanee of at least 3 mm ,correctly sizad standards of the country flnatallatlon. Plfollowthe connections lfanearthconn11ction isnessary, htheelectric ch11ck that it corr11ctly connections. and that connected diagram a dublepole swihwith a cntact and in accordance with the electrical and oerloading protection has bean connected and adjusted to the If a ventilator is instled in a duct, tductmust ba exclusively for the ventilation llmlls. adequate thermal crrepondlng ayate

!lll.I!.,. Before uterractly. ventilator starting Tha apparatus up the machine, mak11 sure that la well secured and the alectrlcal Thaaatydevices No loose material have been adequately or fitting remains can be sucked has been1untedin a duct1akesure it is clearflosamaterial. and ready safety dls for use. connected. have been carried cnnactlona up by the ventilator, If the connd,adjusted are correctly sealed and water-tight. The earth fittings conned. are adequately The 11lactrlcal are correctly The wire and electrical connectinsinputs up thl! machin11, make sure that:

erturna In the corctdlrectln. vibrations. devices safety from the mains supply. When starting The prop11ll The'8are no abnormal If any of thaectrlcal disconnected checked Malntananca. before trying tstartup the machine the ventilator again. bltheapparatu The whole instlation mubequlckly shou Id be carefully been switched o.Prevent

, mak11 sure it is disconn11ct11d from the mains the pnibility of anyone should be carriad ltwhll11 It Is being manlpulatad. inspected. must be regularly working mror grids. ler, turbine, life of the ventilatrunit. Mkennot to unst111the propeller with cmpllance work shuId be carriedutIn strict These i1spactions condlllns,In rtavoiddirt or dust and regulations. This cou Id be dangerous or turbine. Before manipulating even if it has previously supply alsacnn11ctlng The apparatus utMIngIn mind the machl1e's accumulangnthl! prop11l shenthe working perceptibly While cl11aning

, great care should All maintenance and repair Mhcounts current safety ib According futur11 pl11aaa containes waste product. lfyuhave any querl11s your lotdeal Manual Instructions generations all lavar deposit to EEC Standards, about the products, please service or condurafter-sales togethewith In mindbilgeus to recycle material and hand in the replaced and packaging machines all the maerlals in their corresponding to the nearest handler of this type of we can. Therefore, recycling the responsibility we shou Id assume with 7

FCC ID: 2A7Q8-GF-800-200P Label Location Inline Fan FCC ID: 2A7Q8-GF-800-200P Model:GF-800\200P 110~120V/60Hz 0.58A 0.49A 2550r/min 1850r/min AIR FLOW Power:65W(H)/53W(L) 530m3/h 410m3/h 300Pa 240Pa

PLEASE PRINT ON COMPANY LETTERHEAD Agent Authorization Company:Guangdong Hongguan Electrical Appliance CO., LTD Address:No. 62, Xinzhou West Street, Lincun Community, TangxiaTown, Dongguan, Guangdong Province, China Model Number(s):GF-800\200P, GF-800\200PM, GF-500\150P, GF-500\150PM, GF-

300\125P, GF-300\125PM, GF-200\100P, GF-200\100PM Product Name:Inline Fan Product Description:Inline Fan We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Luosiwei Title:

Engineering Manager Date: 2022.7.5 Company: Guangdong Hongguan Electrical Appliance Co.,L TD

PLEASE PRINT ON COMPANY LETTERHEAD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A7Q8-GF-800-200P Date: 2022.7.5 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

Schematic Diagram Block Diagram Operational Description External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name:Luosiwei Title: Engineering Manager

Guangdong Hongguan Electrical Appliance CO.,LTD Model Difference FCC ID: 2A7Q8-GF-800-200P

: GF-800\200P, GF-800\200PM, GF-500\150P, GF-500\150PM, GF-300\125P, GF-

Model 300\125PM, GF-200\100P, GF-200\100PM All models have same circuits diag Layout, construction and rated power, only different is the model name. Sincerely, Name/Title Luosiwei / Engineering Manager Company:

Address:

Guangdong Hongguan Electrical Appliance Co.,L TD No. 62, Xinzhou West Street, Lincun Community, TangxiaTown, Dongguan, Guangdong Province, China

+86 13242908918

+86 13242908918 2850212904@qq.com Phone:

Fax:

E-Mail: