FCC ID: VG8EM134AYYMW Microwave Oven

MICROWAVE OVEN INSTRUCTION MANUAL EM134A2XC CONTENTS PRODUCT SAFETY PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY ..........................................................................................EN- IMPORTANT SAFETY INSTRUCTIONS ...................................................................................EN- MATERIALS YOU CAN USE IN MICROWAVE OVEN ............................................................EN- PRODUCT INTRODUCTION SETTING UP YOUR OVEN ...........................................................................................................EN- OPERATION INSTRUCTIONS .....................................................................................................EN- INSTRUCTION FOR USE MAINTENANCE TROUBLE SHOOTING ..................................................................................................................EN- NOTE BEFORE OPERATING THIS PRODUCT, READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.BE SURE TO SAVE THIS BOOKLIST FOR FUTURE REFERENCE EN-2 PRODUCT SAFETY PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY

(a). Do not attempt to operate this oven with the door open since open door operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks.

(b). Do not place any object between the oven front face and the door or allows soil or cleaner residue to accumulate on sealing surfaces.

(c). Do not operate the oven if it is damaged. It is particularly important that the oven door close properly and that there is no damage to the:

(1). DOOR (bent)

(2). HINGES AND LATCHES (broken or loosened)

(3). DOOR SEALS AND SEALING SURFACES

(d). The oven should not be adjusted or repaired by anyone except properly qualified service personnel. SPECIFICATIONS Model:

Rated Voltage:

Rated Input Power (Microwave):

Rated Output Power (Microwave):

EM134A2XC 120V~60Hz 1500W 1100W EN-3 IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions should be followed, including the following:

WARNING - To reduce the risk of burns, electric shock, fire, injury to persons or exposure to excessive microwave energy:

Read all instructions before using the appliance.

Read and follow the specific: "PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY" found on page 2.

This appliance must be grounded. Connect only to properly grounded outlet. See

"GROUNDING INSTRUCTIONS" found on page .

Install or locate this appliance only in accordance with the provided installation instructions.

Some products such as whole eggs and sealed containers - for example, closed glass jars - are able to explode and should not be heated in this oven.

Use this appliance only for its intended use as described in the manual. Do not use corrosive chemicals or vapors in this appliance. This type of oven is specifically designed to heat, cook or dry food. It is not designed for industrial or laboratory use.

As with any appliance, close supervision is necessary when used by children.

Do not operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped.

This appliance should be serviced only by qualified service personnel. Contact nearest authorized service facility for examination, repair, or adjustment.

Do not cover or block any openings on the appliance.

Do not store this appliance outdoors. Do not use this product near water - for example, near a kitchen sink, in a wet basement, near a swimming pool, or similar location.

Do not immerse cord or plug in water.

Keep cord away from heated surface.

Do not let cord hang over edge of table or counter.

When cleaning surfaces of door and oven that comes together on closing the EN-4 PRODUCT SAFETY IMPORTANT SAFETY INSTRUCTIONS door, use only mild, nonabrasive soaps, or detergent applied with a sponge or soft cloth.

To reduce the risk of fire in the oven cavity:

Do not overcook food. Carefully attend appliance when paper, plastic, or other combustible materials are placed inside the oven to facilitate cooking.

Remove wire twist-ties from paper or plastic bag before placing bag in oven.

If material inside of the oven ignite, keep oven door closed, turn oven off, and disconnect the power cord, or shut off power at the fuse or circuit breaker panel.

Do not use the cavity for storage purposes. Do not leave paper products, cooking utensils, or food in the cavity when not in use.

Liquids, such as water, coffee, or tea are able to be overheated beyond the boiling point without appearing to be boiling. Visible bubbling or boiling when the container is removed from the microwave oven is not always present. THIS COULD RESULT IN VERY HOT LIQUID SUDDENLY BOILING OVER WHEN THE CONTAINER IS DISTURBED OR A UTENSIL IS INSERTED INTO THE LIQUID. To reduce the risk of injury to persons:

Do not overheat the liquid.

Stir the liquid both before and halfway through heating it.

Do not use straight-sided containers with narrow necks.

After heating, allow the container to stand in the microwave oven for a short time before removing the container.

Use extreme care when inserting a spoon or other utensil into the container. SAVE THESE INSTRUCTIONS EN-5 GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. WARNING - Improper use of the grounding can result in a risk of electric shock. Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded. If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-blade grounded plug, and 3-slot receptacle that will accept the plug on the appliance. The marked rating of the extension cord shall be equal to or greater than the electrical rating of the appliance. DANGER Electric Shock Hazard Touching some of the internal components can cause serious personal injury or death. Do not disassemble this appliance. WARNING Electric Shock Hazard Improper use of the grounding can result in electric shock. Do not plug into an outlet until appliance is properly installed and grounded. 1. A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord. 2. Longer cord sets or extension cords are available and may be used if care is 3. exercised in their use. If a long cord or extension cord is used:

(1). The marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance.

(2). The extension cord must be a grounding-type 3-wire cord.

(3). The longer cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over unintentionally. EN-6 PRODUCT SAFETY RADIO INTERFERENCE 1. Operation of the microwave oven may cause interference to your radio, TV or similar equipment. 2. When there is interference, it may be reduced or eliminated by taking the following measures:

(1). Clean door and sealing surface of the oven

(2). Reorient the receiving antenna of radio or television.

(3). Relocate the microwave oven with respect to the receiver.

(4). Move the microwave oven away from the receiver.

(5). Plug the microwave oven into a different outlet so that microwave oven and receiver are on different branch circuits.

EN-7 UTENSILS CAUTION Personal Injury Hazard Tightly-closed utensils could explode. Closed containers should be opened and plastic pouches should be pierced before cooking. See the instructions on "Materials you can use in microwave oven or to be avoided in microwave oven."

There may be certain non-metallic utensils that are not safe to use for microwaving. If in doubt, you can test the utensil in question following the procedure below. Utensil Test:

1. Fill a microwave-safe container with 1 cup of cold water (250ml) along with the utensil in question. 2. Cook on maximum power for 1 minute. 3. Carefully feel the utensil. If the empty utensil is warm, do not use it for microwave cooking. 4. Do not exceed 1 minute cooking time. EN-8 PRODUCT INTRODUCTION SETTING UP YOUR OVEN NAMES OF OVEN PARTS AND ACCESSORIES Remove the oven and all materials from the carton and oven cavity. Your oven comes with the following accessories:

This illustration is for reference only. Some accessories are available only with certain models, depending on the appliance model, individual details may differ. Glass Tray Turntable Ring Assembly Turntable Shaft Instruction Manual C E F D B A A)) Control pan B)) Turntable sha C)) Observation wind D)) Door assemb E)) Safety interlock syst F)) Oven cavi EN-9 SETTING UP YOUR OVEN TURNTABLE INSTALLATION Cleaning the cooking compartment and putting the turntable in place. For new installations, make sure all packaging and shipping tape has been removed from the turntable shaft. Before using the appliance to prepare food for the first time, you will need to put the turntable in place correctly. You must clean the cooking compartment and accessories. 1 2 How to put the turntable in place:

1. Place the turntable ring assembly into the recess in the cooking compartment. 2. Place the glass tray on the turntable ring assembly . Fit the raised, curved lines in the center of the glass tray bottom between the three spokes of the shaft. Make sure that the glass tray engages in the turntable shaft in the centre of the cooking compartment floor. The rollers on the should fit insidethe turntable bottom ridge. 3 Note 1. Never use the appliance without the turntable. Make sure that it is properly engaged. The turntable can turn clockwise or anti-clockwise. 2. Never place the glass tray upside down. The glass tray should never be restricted. 3. Both glass tray and turntable ring assembly must always be used during cooking. 4. All food and containers of food are always placed on the glass tray for cooking. 5. Never restrict the movement of the turntable. 6. If glass tray or turntable ring assembly cracks or breaks, contact your nearest authorized service center. EN-10 PRODUCT INTRODUCTION SETTING UP YOUR OVEN COUNTERTOP INSTALLATION Remove all packing material and accessories. Examine the oven for any damage such as dents or broken door. Do not install if oven is damaged. Cabinet: Remove any protective film found on the microwave oven cabinet surface. Do not remove the light brown Mica cover that is attached to the oven cavity to protect the magnetron. INSTALLATION 1. Select a level surface that provide enough open space for the intake and/or outlet vents.

3.0 inches(7.5cm )

3.0 inches(7.5cm )

Side Top Left Right Front Rear Bottom Distance

(cm) 30

Open

0

(1) Leave a minimum clearance of 12 inches (30cm) above the oven.

(2) Do not remove the legs from the bottom of the oven.

(3) Blocking the intake and/or outlet openings can damage the oven.

(4) Place the oven as far away from radios and TV a s possible. Operation of microwave oven may cause interference to your radio or TV reception.

EN-11 INSTRUCTION FOR USE OPERATION INSTRUCTIONS CONTROL PANEL EN-12 INSTRUCTION FOR USE OPERATION INSTRUCTIONS This microwave oven uses modern electronic control to adjust cooking parameters to meet your needs better for cooking. 1.CLOCK SETTING 1 In waiting state, press " Timer/Clock " once,

"0:00" displays. Hour figures flash. 2 Press number keys to enter the time. Example: To set the clock to 12:10, please press

"1,2,1,0" in turn. 3 Press " Timer/Clock " to confirm. The clock is set. If the clock is not set, it would not function when powered. During the process of clock setting, if no in 1 minute, the oven will go back to the previous status automatically. If the entered number is not within the range of 1:00-12:59, the setting NOTE is invalid. To reset the clock, please repeat step 1 to step 3. EN-13 INSTRUCTION FOR USE Level 10 9 8 7 6 5 4 3 2 1 Power 100%

90%

80%

70%

60%

50%

40%

30%

20%

10%

Display PL10 PL9 PL8 PL7 PL6 PL5 PL4 PL3 PL2 PL1 0 0%

PL0 OPERATION INSTRUCTIONS 2. MICROWAVE COOKING Microwave Power Chart 1 Press the " Cook Time " key once,

"00:00" displays. 2 Press number keys to enter the time. The maximum time value is "99:99" . 3 Press " Power " for times or press number key to adjust the power level. The 11 power levels are available. 4 Press " " to start cooking . NOTE If the clock is not set, it would not function when powered. During the process of clock setting, if no in 1 minute, the oven will go back to the previous status automatically. EN-14 OPERATION INSTRUCTIONS 3. CLOCK SETTING 1 In waiting state, press " Timer/Clock " twice,

"0:00" displays. Press number keys to enter the time. The maximum time value is " 99:99 ". Press " " to confirm. The timer starts counting down. 2 3 1 2 NOTE The kitchen timer is a timer. During kitchen timer, any program cannot be set. 4. SPEEDY COOKING In waiting state, press " " to cook food with 100%

power level for 30 seconds. Each press on the same key can increase 30 seconds and the maximum time value is "99:99". In waiting state, pressing number keys 1 to 6 let you quickly select a cooking time from 1 to 6 minutes. Then you can press " " to increase the cooking time. The maximum time value is " 99:99 ". NOTE This function cannot work under defrost by weight and auto menu. EN-15 INSTRUCTION FOR USE OPERATION INSTRUCTIONS 5. DEFROST BY WEIGHT 1 Press " Weight Defrost " and then the screen will display "dEF1". Press number keys to enter the weight of food. The range of weight is 4-70 Oz. Press " " to start defrosting. 6. DEFROST BY TIME 1 Press " Time Defrost " and then the screen will display " 0:00 ". Press number keys to set the desired defrost time. The maximum time value is " 99:99 " . Press " " to start defrosting. 2 3 2 3 NOTE

EN-16 OPERATION INSTRUCTIONS 7. MULTI-STAGE COOKING Two stages can be maximumly set. If one stage is defrosting, it will be put in the first stage automatically. The buzzer will ring once after each stage and the next stage will begin. NOTE Auto menu and preheating cannot be set as one of the multi-stage. Example: If you want to defrost the food for 5 minutes, then to cook with 80% microwave power for 7 minutes. The steps are as following:

1 Press " Time Defrost " and then the screen will display "0:00". 2 Press""

Press " Cook Time "

Press " Power " 8 to set the power level. Press " " to start cooking . 3 4 5 EN-17 INSTRUCTION FOR USE OPERATION INSTRUCTIONS 8. AUTO MENU 1 Press a menu key repeatedly to choose the weight you want to cook. For example, press " Popcorn "

once and 2.75 Oz will display. 2 Press " " to start cooking. AUTO MENU CHART Menu Popcorn Potato Bacon Chicken Bread Display 2.75 Oz 3.2 Oz 1 2 3 4 1 2 3 4 5 6 8.81 Oz 15.87 Oz 22.92 Oz 1.76 Oz 3.52 Oz 5.29 Oz Weight 2.75 Oz 3.2 Oz 1 2 3 4 1 slice 2 slices 3 slices 4 slices 5 slices 6 slices 8.81 Oz 15.87 Oz 22.92 Oz 1.76 Oz 3.52 Oz 5.29 Oz EN-18 OPERATION INSTRUCTIONS 9. SENSOR REHEAT In waiting state, press " Reheat ". The screen will display "SC01". When the oven senses, the screen displays the remaining time. Press " " to start cooking . 10. INQUIRING FUNCTION If the clock has been set, the current time will display for three seconds by pressing

" Timer/Clock " in the cooking state. In the microwave cooking state, press " Power " to inquire the power level. It will display for three seconds. 1 2 1 2 1 2 11. LOCK FUNCTION FOR CHILDREN You can use this function to prevent children from accidentally turning the oven on. To activate the lock: In waiting state, press and hold

" " for three seconds. A long beep sounds and the locked icon will display. To deactivate the lock: In locked state, press and hold " " for three seconds. A long beep sounds. EN-19 INSTRUCTION FOR USE OPERATION INSTRUCTIONS 12. SILENT MODE To activate the silent mode: In waiting state, press and hold "8" for 3 seconds. A long beep will sound. When you press the keys, it does not make a sound. To deactivate the silent mode: In silent mode, press and hold "8" for 3 seconds. A long beep will sound. 13. ECO FUNCTION To enter ECO mode:

In waiting state, press . The screen will turn off. To cancel ECO mode:

In ECO mode, press any key to wake up the screen. 1 2 1 2 EN-20 TROUBLE SHOOTING Check your problem by using the chart below and try the solutions for each problem. TROUBLE

Oven will not start Electrical cord for oven is not plugged in. Door is open. Wrong operation is set. a. b. c. Plug into the outlet. Close the door and try again. Check instructions Arcing or sparking Materials to be avoided in microwave oven were used. The oven is operated when empty. Spilled food remains in the cavity. a. b. c. Use microwave-safe cookware only. Do not operate with oven empty. Clean cavity with wet towel. Unevenly cooked foods Materials to be avoided in microwave oven were used. Food is not defrosted completely. Cooking time, power level is not suitable. Food is not turned or stirred. a. b. c. d. Use microwave-safe cookware only. Completely defrost food. Use correct cooking time, power level. Turn or stir food. Overcooked foods Cooking time, power level is not suitable. Use correct cooking time, power level. Undercooked foods Improper defrosting Materials to be avoided in microwave oven were used. Food is not defrosted completely. Oven ventilation ports are restricted. Cooking time, power level is not suitable. a. b. c. d. Use microwave-safe cookware only. Completely defrost food. Check to see that oven venti-lation ports are not restricted. Use correct cooking time, power level Materials to be avoided in microwaveoven were used. Cooking time, power level is not suitable. Food is not turned or stirred. a. b. c. Use microwave-safe cookware only. Use correct cooking time, power level. Turn or stir food Sensor cooked foods not properly cooked Cover or lid on food not vented. Door opened before sensor-detect-

ed cooking time appears in display. a. b. Cover or lid over food must contain vent hole for escaping steam. Do not open door to stir orturn food before sensor-detected cooking time appears in display. a. b. c. a. b. c. a. b. c. d. a. b. c. d. a. b. c. a. b. EN-21

Model:EM134ALQ-P Read these inst ruct ions carefully be fore using your microwa ve ove n, and keep it caref ully. If you follow the instructions, your oven will provide you with many years of good service. SAVE THESE INSTRUCTIONS CAREFULLY PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY

(a) Do not attempt to operate this oven with the door open since operation can result in harmful exposure to microwave energy. open door It is important not to defeat or tamper with the safety interlocks.

(b) Do not place any object between the oven front face and the door or allows soil or cleaner residue to accumulate on sealing surfaces.

(c) Do not operate the oven if it is damaged. It is particular the oven door clo se properly and t hat there is no d amage to the:

ly important that

(1) DOOR (bent)

(2) HINGES AND LATCHES (broken or loos ened)

(3) DOOR SEALS AND SEALING SURFACE S

(d) The oven shoul d not be adjusted or repaired by anyone ex cept properly qualified service p ersonnel . Specifications Model Rated Voltage Microwave Input Microwave Output EM134ALQ 120 V~ 60 Hz 1500 W 1100 W 2 IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety the following:

precautions should be followed, including WARNING -

To reduce the risk of burns, electric shock, fire, injury to persons or exposure to excessive microwave energy:

1. Read all instructions before using the appliance. 2. Read and follow the specific:

" PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY" found on p age 2. 3. This appliance must be grounded. Connect only to properly grounded outlet. See

" GROUNDING INSTRUCTIONS"

4. Install or locate this appliance only in found on page 4. accordance with the provided installation instructions. 5. Some products such as whole eggs and sealed containers - for example, closed glass jars - are able to explode and should not be heated in this oven. 6. Use this appliance only for its intended use as described in the manual. Do not use corrosive chemicals or vapors in this appliance. This type of oven is specifically designed to heat, cook or dry food. It is not designed for industrial or laboratory use. 7. As with any appliance, close 8. Do not operate this appliance if it has a properly, or if it has been damaged or dropped. supervision is necessary when used by children. damaged cord or plug, if it is not working 9. This appliance should be serviced only by qualified service personnel. Contact nearest authorized service facility for examination, repair, or 10. Do not cover or block any openings on the appliance. 11. Do not store this appliance outdoors. Do not use this product near water - for adjustment. example, near a kitchen sink, in a wet basement, near a swimming pool, or similar location. 2 3 1 . Do not immerse cord or plug in water. 1 . Keep cord away from heated surface. 14. Do not let cord hang over edge of 15. When cleaning surfaces of door and oven that comes together on closing the door, use only mild, nonabrasive soaps, or detergent applied with a sponge or soft cloth. table or counter. 16. To reduce the risk of fire in the oven cavity:

(1). Do not overcook food. Carefully attend appliance when paper, plastic, or other combustible materials are placed inside the oven to facilitate cooking.

(2). Remove wire twist-ties from paper or plastic bag before placing bag in oven.

(3). If material inside of the oven ignite, keep oven door closed, turn oven off, and disconnect the power cord, or shut off power at the fuse or circuit breaker panel.

(4). Do not use the cavity for storage purposes. Do not leave paper products, cooking utensils, or food in the cavity when not in use. 17. Liquids, such as water, coffee, or tea are able to be overheated beyond the boiling point without appearing to be boiling. Visible bubbling or boiling when the container is removed from the microwave oven is not always present. 3 THIS COULD RESULT IN VERY HOT LIQUID SUDDENLY BOILING OVER WHEN THE CONTAINER IS DISTURBED OR A UTENSIL IS INSERTED INTO THE LIQUID. To reduce the risk of injury to persons:

(1) Do not overheat the liquid.

(2) Stir the liquid both before and halfway through heating it.

(3) Do not use straight-sided containers with narrow necks.

(4) After heating, allow the container to before removing the container.

(5) Use extreme care when inserting a stand in the microwave oven for a short time spoon or other utensil into the container. SA E THESE INSTRUCTIONS V GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the appliance is equipped with a cord having a must be plugged into an outlet that is properly installed and grounded. grounding wire with a grounding plug. electric current. This The plug WARNING - Improper use of the grounding can result in a risk of electric shock. understood, Consult a qualified electrician or serviceman if the grounding instructions are not completely or if doubt exists as to whether the appliance is properly grounded. If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-blade grounded plug, and 3-slot receptacle that will accept the plug on the appliance. The marked rating of the extension cord shall be equal to or greater than the electrical rating of the appliance. Electric Shock Hazard DANGER -

Touching some of the internal components can cause serious personal injury or death. Do not disassemble this appliance. Electric Shock Hazard WARNING -

Improper use of the grounding can result in electric shock. Do not plug into an outlet until appliance is properly installed and grounded.

1. A short power supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord. 2. Longer cord sets or extension cords are available and may be used if care is exercised in their use. 3. If a long cord or extension cord is used:

(1) The marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance.

(2) The extension cord must be a grounding-type 3-wire cord.

(3) The longer cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over unintentionally. 4 RADIO INTERFERENCE 1. Operation of the microwave oven may cause interference to your radio, TV or similar 2. When there is interference, it may be reduced or eliminated by taking the following equipment. measures:

1) Clean door and sealing surface of the oven 2) Reorient the receiving antenna of radio or television. 3) Relocate the microwave oven with respect to the receiver. 4) Move the microwave oven away from the receiver. 5) Plug the microwave oven into a different outlet so that microwave oven are on different branch circuits. and receiver This device complies with part 18 of the FCC Rules. UTENSILS Personal Injury Hazar d CAUTION -

Tightly-closed utensils could explode. Closed containers should be opened and plastic pouches should be pierced before cooking. See the instructions on "Materials you can use in microwave oven or to be avoided in microwave oven."

There may be certain non-metallic utensils that are not safe to use for microwaving. If in doubt, you can test the utensil in question following the procedure below. Utensil Test:

utensil in question. 1. Fill a microwave-safe container with 1 cup of cold water (250ml) along with the 2. Cook on maximum power for 1 minute. 3. Carefully feel the utensil. If the empty utensil is warm, do not use it for microwave cooking. 4. Do not exceed 1 minut e cooking time. 5 Mat eria ls you can use in micro wave oven Utensils Remarks Browning dish Dinnerware Glass jars Glassware Oven cooking bags Paper plates and cups Paper towels Parchment paper Plastic Plastic wrap Follow manufacturer* instructions. The bottom of browning dish must be at least 3/16 inch (5mm) above the turntable. Incorrect usage may cause the turntable to break. Microwave-safe only. Follow manufacturer's instructions. Do not use cracked or chipped dishes. Always remove lid. Use only to heat food until just warm. Most glass jars are not heat resistant and may break. Heat-resistant oven glassware only. Make sure there is no metallic trim. Do not use cracked or chipped dishes. Follow manufacturer* instructions. Do not close with metal tie. Make slits to allow steam to escape. Use for short*erm cooking/warming only. Do not leave oven unattended while cooking. Use to cover food for reheating and absorbing fat. Use with supervision for a short-term cooking only. Use as a cover to prevent splattering or a wrap for steaming. Microwave-safe only. Follow the manufacturer* instructions. Should be labeled "Microwave Safe". Some plastic containers soften, as the food inside gets hot. "Boiling bags" and tightly closed plastic bags should be slit, pierced or vented as directed by package. Microwave-safe only. Use to cover food during cooking to retain moisture. Do not allow plastic wrap to touch food. Thermometers Microwave-safe only (meat and candy thermometers). Wax paper Use as a cover to prevent splattering and retain moisture. Materials to be avoided in micro wave oven Utensils Remarks Aluminum tray Food carton with metal handle Metal or metal-

trimmed utensils Metal twist ties Paper bags Plastic foam Wood May cause arcing. Transfer food into microwave-safe dish. May cause arcing. Transfer food into microwave-safe dish. Metal shields the food from microwave energy. Metal trim may cause arcing. May cause arcing and could cause a fire in the oven. May cause a fire in the oven. Plastic foam may melt or contaminate the liquid inside when exposed to high temperature. Wood will dry out when used in the microwave oven and may split or crack. 6 SETTING UP YOUR OVEN Names of Oven Parts and Accesso ries Remove the oven and all materials from the carton and oven cavity. Your oven comes with the following accessories:

Glass tray 1 Turntable ring assembly 1 Instruction Manual 1 F A E D C B A) Control panel B) Turntable shaft C) Turntable ring assembly D) Glass tray E) Observation window F) Door assembly G) Safety interlock system G Glass tray Turntable shaft Turntable Installatio n Hub (underside) a. Never place the glass tray upside down. The glass tray should never be restricted. b. Both glass tray and turntable ring assembly must always be used during cooking. c. All food and containers of food are always placed on the glass tray for cooking. d. If glass tray or turntable ring assembly cracks or breaks, contact your nearest authorized service center. Turntable ring assembly 7 Count erto p Installation Remove all packing material and accessories. Examine the oven for any damage such as dents or broken door. Do not install if oven is damaged. Cabinet: Remove any protective film found on the microwave oven cabinet surface. Do not remove the light brown Mica cover tha t is atta ched to the oven cavit y to protect t he magnetron. Installatio n 1. Select a level surface that provide enough open space for the intake and/or outlet vents. 12 inch(30cm) 3.0 inch(7.5cm) OPEN 3.0 inch(7.5cm)

>3.0ft(91.6cm) A minimum clear ance of 3.0 inches

(7.5cm) is required between the oven and any adjacent walls. One side must be open. The minimum installation height is 3.0ft(91.6cm).

(1) Leave a minimu m clear ance of 12 inches (30cm) abov e the oven.

(2) Do not remove the legs fro m the botto m of the oven.

(3) Blocking the intake and/or outlet openings can damage the oven.

(4) Place the oven as far away from radios and TV as possible. Operation of microwave oven may cause interference to your radio or TV reception. 2. Plug your oven into a standard household outlet. Be sure the voltage and the frequency is the same as the voltage and the frequency on the rating label. WARNING: Do not install oven over a range cooktop or other heat-producing appliance. If installed near or over a heat source, the oven could be damaged and the warranty would be void. The accessible surface may be hot during operation. 8 OPERATION 1. Power Level Ten power levels are available. Level Power Display 10 9 8 7 6 5 4 3 2 1 100%

90%

80%

70%

60%

50%

40%

30%

20%

10%

PL10 PL9 PL8 PL7 PL6 PL5 PL4 PL3 PL2 PL1 Remarks: when a power between level 10-8 is chosen, the high level indicator is lighted and it will flash when in operation. When a power between level 7-1 is chosen, the low level indicator is lighted and it will flash when in operation. 2. Clock Setting When the microwave oven is plugged into a outlet, the oven will display " 0:00 "

(1) Press " TIMER/CLOCK " twice, LED will display 00:00, clock indicator will be lighted. The first hour figure will flash; ":" and the other "0" will be lighted.

(2) Press the number keys and enter the correct time. For example,time is 10:12 now, please press " 1,0,1,2" in turn.

(3) Press " TIMER/CLOCK " to finish clock setting, and the clock indicator will go out. ":" will flash and the clock will be lighted.

(5) If the numbers input are not within the range of 1:00--12:59, the setting will be invalid until valid numbers are input. Note: In the process of clock setting, if the "STOP/CANCEL" button is pressed or if there is no operation within 1 minute, the oven will go back to the former state automatically. 3. Kitchen Timer

(1) Press " TIMER/CLOCK " once, LED will display 00:00, clock indicator will be lighted.

(2) Press the number keys and enter the correct timer.(The maximum time is 99 minutes and 99 seconds)

(3) Press " START/+30SEC. " to confirm setting, clock indicator will flash.

(4) When the kitchen time arrives, clock indicator will go out. The buzzer will ring 5 times. If the clock be set (12-hour system), LED will display the current time by counting down. Note: The kitchen time is differ from 12-hour system,Kitchen Timer is a timer. That is to say it poccesses the function of alarming clock. 9 7. Speedy Cooking

(1) In waiting state, instant cooking at 100% power level can be started by select a cooking time from 1 to 3 minutes by pressing number pads1 to 3. Press " START/+30SEC. " to increase the cooking time; The maximum cooking time is 99 minutes and 99 seconds.

(2) In waiting state, instant cooking at 100% power level with 30 seconds' cooking time can be started by pressing " START/+30SEC ". Each press on the same button will increase cooking time by 30 seconds. The maximum cooking time is 99 minutes and 99 seconds.

(3) Press " COOK TIME " first and adjust cooking time,then press " START/+30SEC " to start cooking with full microwave power. Note:(1) Under microwave, time defrost and popcorn states, press " START/+30SEC " button to increase cooking time by 30 seconds.

(2) Under sensor menu cooking and weight defrost state,time cannot be added by pressing

"START/+30SEC. " button. 8.POPCORN

(a) Press " POPCORN " repeatedly until the weight you needed appears in the display, " " ," " and "Oz" light. For example, press " POPCORN " twice, "3.5" displays.

(b) Press "

START/+30SEC. " to cook, "Oz" disappears, " " ," " are flashing. Times( Press "POPCORN") Once Twice Thrice Weight 3.0 Oz 3.5 Oz 1.75 Oz Display 3.0 3.5 1.75 10 8.BEVERAGE

(a) Press " BEVERAGE " repeatedly until the weight you needed appears in the display,1, 2, 3 available.

(b) Press "

START/+30SEC. " to cook, " " ," " are flashing. Times( Press "BEVERAGE") Amount Display Once Twice Thrice 1cup 2cups 3cups 1 2 3 Sensor Cook Menu

"SC-6" is displayed.

(1) In waiting states, and put the food into the microwave oven. Pr ess "SENSOR REHEAT".

(2) Press "

START/+30SEC " to start sensor reheat function and no need to set time.

(3)The sensor will sound twice when the steaming was be emanated.The surplus time will displays, the buzzer will sound 5 beeps when finishing and the oven will turn back to the waiting states. Note:(1) Food to be avoided in sensor reheating. a.Bread and other dry food, such as biscuit,cake. b.For raw or uncooked foods. c.Beverage and frozen food.

(2)The oven cannot cook automatically when the temperature of the oven cavity is high.

(3)The reheat food can be covered with the lid.But the lid must has venthole in order to emanate the steam. Sealed utensil is forbidden.

(4) During sensor cooking process, please do not open the oven door or press

"STOP/CANCEL " key. Otherwise,the sensor will make mistakes.

(5)The sensor reheat has different request for different food. Casser oles - Add 3 to 4 tablespoons of water, cover with lid or vented plastic wrap. Stir when time appears in the display window. Canned foods -Empty contents into casserole dish or serving bowl,cover dish with lid or vented plastic wrap. After reheating, let stand for a few minutes. Plate of food- Arranged food on plate; top with butter, gravy,etc. Cover with lid or vented plastic wrap. After reheating, let stand for a few minutes. 11 Sensor Cook Chart Menu Weight Inicial Temp. Additional Instructions SC-1 Potato 1~4 Units

(6~8Oz each one) Room Temp. SC-2 Meat 8~24 Oz

(225~680g) 5 degrees Pierce each potato with a fork 6 times around its surface. Place potatoes around the edge of a paper-towel-lined turntable. Do not cover. If additional time is needed, continue to cook manually. Please let stand for 5 minutes in the oven after finishing to avoid burning. Break apart in glass bowl or colander. Cover with lid or vented plastic wrap. Juices should be clear when done, Drain.When cooking time counts down. Press "STOP/

CANCEL" to pause and open the oven door to mix and then continue to cook. SC-3 Frozen Pizza 6~12 Oz

(170~340g) minus 18 degrees If the weight is over 12 OZ,please set the additional cooking time manually. SC-4 Frozen Vegetable 4~16Oz

(110~450g) Room Temp. 8~32 Oz

(225~900g) minus 18 degrees All pieces should be the same size. Wash thoroughly, add 15ml water per 125g vegetables, and cover with a lid or vented plastic wrap. When cooking time counts down. Press " STOP/CANCEL " to pause and open the oven door to mix and then continue to cook. Be careful when removing the film cover after cooking. Remove Facing away from you to avoid steam burns. If additional time is needed, continue to cook manually. Cover the film before cooking and leave a spacing near the edge of the container in order to let the steam out. When buzzer sound twice, cooking time counts down. Press " STOP/CANCEL " to pause and open the oven door to mix. 8~12 Oz 5 degrees Reheat food is dinner plate. When sensor time finish, Cooking time counts down.Now you can mix it and then continue reheating. SC-5 Frozen entree SC-6 Sensor Reheat 12 10. MEMORY FUNCTION

(1) Press "0/ECO " to choose memory 1-3 procedure. 1,2,3 will display.

(2) If the procedure has been set, press " START/+30SEC. " to use it. If not, continue to set the procedure. Only one or two microwave stages can be set.

(3) After finishing the setting, press " 0/ECO " to save the procedure and turn back to the waiting states.If press " START/+30SEC. " ,it can save and operate the setting. Example: save one program as memory 2.To cook the food with 80% microwave power for 3 minutes and 20 seconds. Operate the following steps:

a. In waiting states, press "0/ECO " twice, "2" displays. b. Press "COOK TIME ",then input number keys "3","2","0" to choose the cooking time. c. Press "POWER LEVEL " once,then press number button "8", "PL8" displays. d. Press "0/ECO " to save the current setting. If press " START/+30SEC. ",the cooking program can be operated and save it as memory 2. e. To run the saved program, in waiting states, press " 0/ECO " twice, "2" displays and press " START/+30SEC. " to run the saved cooking program. Note: Auto menu and Defrosting cannot be set as memory cooking. 11. Multi-section cooking At most 2 sections can be set for cooking. In multi-section cooking, if one section is defrosting, then defrosting shall be placed in the first section. When the first stage finish, the buzzer will sound twice and the next stage will begin cooking. Example: if you want to cook with 80% microwave power for 5 minutes + 60% microwave power for 10 minutes. The cooking steps are as following.

(1) Press " COOK TIME " once, then press "5","0","0" to set 5 minutes.

(2) Press " POWER LEVEL " once.

(3) Press number button "8" to set 80% microwave power.

(4) Press " COOK TIME " once, then press "1","0","0","0" to set 10 minutes.

(5) Press " POWER LEVEL " once.

(6) Then press press number button "6" to set 60% microwave power.

(7) Press " START/+30SEC . " to start cooking. Note: auto menu cannot be set as one of the multi-section. 13 12. INQUIRING FUNCTION

(1) In cooking state, press "

TIMER/CLOCK ", the clock will displays for three seconds. After that, the oven will turn back to the clock state. 13. LOCK FUNCTION FOR CHILDREN Lock: In waiting state, press " STOP/CANCEL " for 3 seconds, there will be a long "beep"

denoting the entering into the children-lock state; meanwhile, current time or 0:00 will Lock quitting: In locked state, press " STOP/CANCEL " for 3 seconds, there will be a long

"beep" denoting that lock is released. 14. COOKING END REMINDING FUNCTION When the cooking is over, the buzzer will sound 5 "beep" to reminds user the cooking is display . finished. 15.ECO FUNCTION To enter ECO mode:

To cancel ECO mode:

In waiting state, press 0/ECO for 3 seconds.The screen will turn off. In ECO mode, press any keys or open the door will cancel it. 14 16. SILENT MODE To activate the silent mode:

In waiting state, press and hold 8 for 3 seconds. A long beep will sound. When you press the keys, it does not make a sound. To deactivate the silent mode:

In silent mode, press and hold 8 for 3 seconds. A long beep will sound. 17. OTHER SPECIFICATIONS

(1) In waiting state , if the current time displays, the icon "

: " would flash; otherwise, it shows " 0:00 ".

(2) In setting function state, the corresponding setting displays.

(3) In working or pause state, the surplus cooking time displays. 15 MAINTENANCE Troubl eshootin g Check your problem by using the chart below and try the solutions for each problem. If the microwave oven still does not work properly, contact the nearest authorized service center. TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY Oven will not start a. Electrical cord for oven is not plugged in. b. Door is open. c. Wrong operation is set. a. Plug into the outlet. b. Close the door and try again. c. Check instructions. Arcing or sparking Unevenly cooked foods a. Materials to be avoided in microwave oven were used. b. The oven is operated when empty. c. Spilled food remains in the cavity. a. Materials to be avoided in microwave oven were used. b. Food is not defrosted completely. c. Cooking time, power level is not suit ble. d. Food is not turned or stirred. a a. Use microwave-safe cookware only. b. Do not operate with oven empty. c. Clean cavity with wet towel. a. Use microwave-safe cookware only. b. Completely defrost food. c. Use correct cooking time, power level. d. Turn or stir food. Overcooked foods Cooking time, power level is not suitable. Use correct cooking time, power level. Undercooked foods a. Materials to be avoided in microwave oven were used. b. Food is not defrosted completely. c. Oven ventilation ports are restricted. d. Cooking time, power level is not suitable. a. Use microwave-safe cookware only. b. Completely defrost food. c. Check to see that oven venti-

lation ports are not restricted. d. Use correct cooking time, power level. Improper defrosting a. Materials to be avoided in microwave oven were used. b. Cooking time, power level is not suitable. c. Food is not turned or stirred. a. Use microwave-safe cookware only. b. Use correct cooking time, power level. c. Turn or stir food. PN:16170000A61941 4. Microwave cook

(1) Press " COOK TIME " once, LED will display "00:00".

(2) Press number keys to input the cooking time; the maximum cooking time is 99 minutes and 99 seconds.

(3) Press " POWER LEVEL " once, LED will display "PL10". The default power is 100%

power. Now you can press number keys to adjust the power level.

(4) Press " START/+30SEC. " to start cooking. Example: to cook the food with 50% microwave power for 15 minutes. a. Press "COOK TIME " once."00:00" displays. b.Press "1","5","0","0" in order. c.Press "POWER LEVEL "once,then press "5" to select 50% microwave power. d.Press "START/+30SEC. " to start cooking. Note: In the process of cooking, if the " STOP/CANCEL " button is pressed or if there is no operation within 5 minutes, the oven will go back to the former setting automatically. 5. Weight Defrost Function

(1) Press " DEFROST " twice , LED will display "0.0".

(2) Press numerical buttons to input weight to be defrosted. Input the weight ranged should be between 0.3~6.3 Lbs.

(3) If the weight input is not within 0.3~6.3 Lbs, the input will be invalid. No "beep" will be sound and the unit will not work until valid numbers are input .

(4) Press " START/+30SEC. " to start defrosting and the cooking time remained will be displayed. 6. Time Defrost Function

(1) Press " DEFROST "once, LED will display "00:00".

(2) Press numerical buttons to input defrost time to be defrosted. Input the time ranged is between 0:01~99:99.

(3) Press " START/+30SEC. " to start defrosting. The default microwave power is PL3. The power cannot be adjusted. 9

Project No. : SZ2220321-09747E-EM EXHIBITA-FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the time purchase (Labeling requirements per 2.295)

MICROWAVE OVEN MODEL: EM134A2XC POWER SUPPLY:120V~ 60Hz RATED INPUT(MICROWAVE):1500W RATED OUTPUT(MICROWAVE):1100W MICROWAVE OUTPUT FREQUENCY:2450MHz MANUFACTURE DATE:MM.YYYY FCC ID:VG8EM134AYYMW HOUSEHOLD USE ONLY

(NOT FOR COMMERCIAL USE) THIS DEVICE COMPLIES WITH DHHS RADIATION PERFORMANCE STANDARDS 21 CFR SUBCHAPTER J. MADE IN CHINA Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd. No.6,Yong An Road,Beijiao,Shunde,Foshan. WARNING:Cancer and Reproductive Harm-www.p65warnings.ca.gov CAUTION THIS DEVICE IS TO BE SERVICED ONLY BY PROPERLY QUALIFIED SERVICE PERSONNEL. CONSULT THE SERVICE MANUAL FOR PROPER SERVICE PROCEDURES TO ASSURE CONTINUED COMPLIANCE WITH THE FEDERAL PERFORMANCE STANDARD FOR MICROWAVE OVENS AND FOR PRECAUTIONS TO BE TAKEN TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY. TO ENSURE CONTINUED PROTECTION AGAINST WARNING ELECTRICAL SHOCK HAZARD, CONNECT TO PROPERLY GROUNDED OUTLETS ONLY.DISCONNECT APPLIANCE BEFORE SERVICING. REMOVAL OF OUTERCASE WITH PRODUCT ENERGIZED MAY EXPOSE SERVICEMAN TO HAZARDOUS HIGH VOLTAGE POTENTIALS. CERTAIN INTERNAL PARTS ARE INTENTIONALLY NOT GROUNDED AND MAY PRESENT A RISK OF ELECTRIC SHOCK ONLY DURING SERVICING.SERVICE PERSONNEL

-DO NOT CONTACT THE FOLLOWING PARTS WHILE THE APPLIANCE IS ENERGIZED: IF PROVIDED FAN MOTOR, TURNTABLE MOTOR, DAMPER MOTOR,L.V.TRANSFORMER

(TOUCH CONTROL TYPE) OR TIMER MOTOR ASSEMBLY

(MECHANICAL TYPE). RISK OF ELECTRIC SHOCK. NON-REMOVABLE FASTENERS ARE PROVIDED BECAUSE OF INTERNAL HIGH VOLTAGES. DO NOT REMOVE FASTENERS. NOT FOR BUILT-IN INSTALLATION.

Project No. : SZ2220321-09747E-EM EXHIBITA-FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the time purchase (Labeling requirements per 2.295)

Wikis, PEE TH Gidea MICROWAVE OVEN MODEL: EM134ALQ-P POWER SUPPLY:120V~ 60Hz 54NJ RATED INPUT(MICROWAVE):1500w 214180 RATED OUTPUT(MICROWAVE):1100W MICROWAVE OUTPUT FREQUENCY:

2450MHz MANUFACTURE DATE:MM.YYYY FCC ID:VG8EM134AYYMW HOUSEHOLD USE ONLY

(NOT FOR COMMERCIAL USE) THIS DEVICE COMPLIES WITH DHHS RADIATION PERFORMANCE STANDARDS 21 CFR SUBCHAPTER J. MADE IN CHINA. Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd. No.6,Yong An Road, Beijiao, Shunde, Foshan. WARNING: Cancer and Reproductive LISTED CAUTION -THIs DEVICE Is TO BE SERVICED ONLY BY PROPERLY QUALIFIED SERVICE PERSONNEL. CONSULT THE SERVICE MANUAL FOR PROPER SERVICE PROCEDURES TO ASSURE CONTINUED COMPLIANCE WITH THE FEDERAL PERFORMANCE STANDARD FOR MICROWAVE OVENS AND FOR PRECAUTIONS 10 BE TAKEN 10 AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY. WARNING- To ENSURE CONTINUED PROTECTION AGAINST ELECTRICAL SHOCK HAZARD, CONNECT TO PROPERLY GROUNDED OUTLETS ONLY. DISCONNECT APPLIANCE BEFORE SERVICING. REMOVAL OF OUTERCASE WITH PRODUCT ENERGIZED MAY EXPOSE SERVICEMAN TO HAZARDOUS HIGH VOLTAGE POTENTIALS. CERTAIN INTERNAL PARTS ARE INTENTIONALLY NOT GROUNDED AND MAY PRESENT A RISK OF ELECTRIC SHOCK ONLY DURING SERVICING.SERVICE PERSONNEL DO NOT CONTACT THE FOLLOWING PARTS WHILE THE APPLIANCE IS ENERGIZED: IF PROVIDED FAN MOTOR, TURNTABLE MOTOR, DAMPER MOTOR,L.V.TRANSFORMER TOUCH CONTROL TYPE) OR TIMER MOTOR ASSEMBLY MECHANICAL TYPE).

*RISK OF ELECTRIC SHOCK. NON-REMOVABLE FASTENERS ARE PROVIDED BECAUSE OF INTERNAL HIGH VOLTAGES. DO NOT REMOVE FASTENERS.

+NOT FOR BUILT-IN INSTALLATION.

Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd No.6, Yong An Road, Beijiao, Shunde, Foshan,Guangdong,China TEL: +86-0757-26339595 Email: yejil@midea.com FCC Authorization Date: 2024-3-1 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd, the undersigned, hereby authorizes World Alliance Testing and Certification (Shenzhen) Co., Ltd to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by World Alliance Testing and Certification (Shenzhen) Co., Ltd on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature:

Print Name: Ye Jilin Title: Engineer QA-FR-170-B 7/29/2014

Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd No.6, Yong An Road, Beijiao, Shunde, Foshan,Guangdong,China TEL: +86-0757-26339595 Email: yejil@midea.com Attestation Letter Date: 3/1/2024 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(5)(i) Filing FCC ID: VG8EM134AYYMW Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd certifies that the equipment for which authorization is sought, is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature:

Print Name: Ye Jilin Title: Engineer CFR 47 2.911(d)(5)(i) Attestation Letter

Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd No.6, Yong An Road, Beijiao, Shunde, Foshan,Guangdong,China TEL: +86-0757-26339595 Email: yejil@midea.com Attestation Letter Date: 3/1/2024 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(5)(ii) Filing FCC ID: VG8EM134AYYMW Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Signature:

Print Name: Ye Jilin Title: Engineer CFR 47 2.911 (d)(5)(ii) Attestation Letter

Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd Address: No.6, Yong An Road, Beijiao, Shunde, Foshan,Guangdong,China Tel: +86-0757-26339595 Email: yejil@midea.com Date: 2024/3/1 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: FCC Class II Permission change for FCC ID: VG8EM134AYYMW Original Grant Date: 04/13/2022 Dear Sir/Madam, This is to request a Class II permission change to our product name: Microwave Oven;

FCC ID: VG8EM134AYYMW, the device is identical to the previously certified except for the changes as below for details 1 Change the Computer Board Old:

New:

2 Add the model: ML3-EM13PA(SS)/CA This authorization is valid until further written notice from the applicant. Please contact me if you have any questions or need future information regarding this application. Sincerely, Signature:

Print Name: Ye Jilin Title: Engineer

Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd No.6, Yong An Road, Beijiao, Shunde, Foshan,Guangdong,China TEL: +86-0757-26339595 Email: yejil@midea.com FCC Confidential Authorization Date: 2024-3-1 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: VG8EM134AYYMW In accordance with Sections 0.457 and 0.459 of the Commissions Rules, Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd hereby requests long-

term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature:

Print Name: Ye Jilin Title: Engineer

Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd No.6, Yong An Road, Beijiao, Shunde, Foshan,Guangdong,China TEL: +86-0757-26339595 Email: yejil@midea.com Declaration of Difference 2024/03/01 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern, We, Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd, hereby declare that there are some differences between our Multiple Models and test products. Details as below:

Products tested Name Microwave Oven Model EM134A2XC (FCC ID: VG8EM134AYYMW) Multiple Models XM134AYY, XM134AYYY, EM134AC9, EM134AC2, WML-MS14AHST, ML3-EM13PA(SS)/CA No Difference Differences as the below Testing Products Multiple Models Details EM134A2XC EM134AC9, EM134AC2, WML-

MS14AHST, ML3-EM13PA(SS)/CA XM134AYY, XM134AYYY, X=A or E; M:indicate microwave function; 134: 1 indicate the microwave output power is 1100W, 34 indicate cavity capacity is 34 liters; A: indicate the design No.; YY/YYY: indicate different appearance and color, and appearance difference referred to with or without decorative parts and so on; Model EM134A2XC was chosen for the final testing. Notes: Products tested -the products tested by World Alliance Testing and Certification

(Shenzhen) Co., Ltd Multiple Model- have the same or similar structure, PCB, Material and function to the testing products. Besides the differences in the table above, we declare the products are identical We guarantee all the information provided above is true, and notice that well bear all the consequences caused by any false information or concealing Best Regards, Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd No.6, Yong An Road, Beijiao, Shunde, Foshan,Guangdong,China TEL: +86-0757-26339595 Email: yejil@midea.com Signature:

Print Name: Ye Jilin Title: Engineer

ArentFox Schiff LLP 1717 K Street, NW Washington, DC 20006 202.857.6000 202.857.6395 MAIN FAX afslaw.com Jeffrey Rummel Partner and Communications &

Technology Practice Leader 202.715.8479 jeffrey.rummel@afslaw.com DIRECT U.S. Agent Designation for Service of Process

(Applicant and U.S. Agent are Separate Parties) TO:

FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification Section 2.911(d)(7) Information Designated U.S. Agent Company Name:ArentFox Schiff LLP Contact Name:Jeffrey Rummel Street Address:1717 K St., nw City/Province/Zip:Washington, D.C. 20006 Telephone No: (202)715-8479 Email: Jeffrey.rummel@afslaw.com FRN #: 0021243860 FCC ID: VG8EM134AYYMW This letter is to confirm that we (ArentFox Schiff LLP) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature:

Date:

Signed by (Printed Name/Title): Jeffrey Rummel 2024/03/01 The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-

related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Page 2 Applicant Company name: Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd Grantee Code: VG8 Contact Name: Jilin Ye Street Address: No.6, Yong An Road, Beijiao, Shunde City/Province/Zip: Foshan, Guangdong, China Telephone No: +86-0757-26339595 Email: yejil@midea.com FRN#: 0019079995 Applicant Signature:

Date:

2024/03/01 Signed by (Printed Name/Title): Jilin Ye 022423-17 Rev 6

Request for Class Permissive Change(C2PC) FCC ID: VG8EM134AYYMW Date: 2022-06-22 TO: Federal Communication Commission Please be notified that we, the undersigned, Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd. declare that the reasons for this class II permissive change are as below:

The original date of grant is 12/10/2018. 1. Changed Mother -board as below. Original Mother board-top view New Mother board -top view Original Mother board -bottom New Mother board -bottom Note: They have the same of input& output rating and circuit function except for PCB layout and some electronic components differences. Sincerely, Ye Jilin Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd. Phone : +86-757-26339595 FAX : +86-757-26656995 E-Mail: yejil@midea.com

THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD Authority to Act as Agent Date: June 22, 2022 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

__Jawen Yin from ECMG Electronic Technical Testing Corp (Shenzhen)___ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: _____December 22, 2022____ By:

(Signature1) Title:

___Certification engineer_______ Ye Jilin ________________________

(Print name) On behalf of: _Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd.____

(Company Name) Telephone:

___86-757-2633 9595____ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 041521-14

THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD Request for Confidentiality Date: June 22, 2022 Subject: Confidentiality Request for: ____FCC ID: VG8EM134AYYMW_____ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent *1 Permanent Permanent Permanent Permanent Permanent *3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual ___Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd_____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to

"competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180)2___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By:

(Signature/Title3) Ye Jilin

(Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to https://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 041521-14

Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd No.6, Yong An Road, Beijiao, Shunde, Foshan, Guangdong, China TEL:+86-0757-23606480 Email: xuewf1@midea.com.cn Date: 2022-3-31 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: FCC Class II Permission change for FCC ID: VG8EM134AYYMW Original Grant Date: 11/28/2016 Dear Sir/Madam, This is to request a Class II permission change to our product name: Microwave oven;

(FCC ID: VG8EM134AYYMW), the device is identical to the previously certified except for the changes as below for details 1. Change the Computer control PCB, it is for adding alternative components and will not effect and control microwave frequency/power output. Original PCB The New PCB 2. Change the appearance Original appearance New appearance (Housing color, button pattern different.) 3. Change the Tested model. 4. Add the Multiple Models. 5. Add the Trademark - . This authorization is valid until further written notice from the applicant. Please contact me if you have any questions or need future information regarding this application. Sincerely, Signature:

Xue Wenfei Engineer

Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd No.6,YongAnRoad,Beijiao,Shunde,Foshan,Guangdong,China DeclarationofDifference 2022-03-22 To Whom It May Concern, We, Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd, hereby declare that there are some differences between our Multiple Models and test products.Details as below:

Products Name Microwave Oven Model EM134A2XC FCC ID: VG8EM134AYYMW Multiple Models XM134AYY,XM134AYYY,EM134AC9 EM134AC2,WML-MS14AHST No Difference Differences as the below Testing Products EM134A2XC Multiple Models XM134AYY,XM134AYYY,EM134AC9 EM134AC2WML-MS14AHST Details X=A or E;

M: indicate microwave function;

134:1 indicate the microwave output power is1100W,34 indicate cavity capacity is 34 liters ;A: indicate the design No.;YY/YYY: indicate different appearance and color, and appearance difference referred to with or without decorative parts and so on; Model EM134A2XC was chosen for the final testing. EM134A C9, EM134AC2 as same as XM134AYY except the model number. WML-MS14AHST as same as EM134A2XC except the model number and brand. Notes: Products tested -the products tested by ATC Multiple Model-have the same or similar appearance, structure, PCB, Material and function to the testing products. Besides the differences in the table above, we declare the products are identical We guarantee all the information provided above is true, and notice that well bear all the consequences caused by any false information or concealing TEL:+86-0757-23606480Email:xuewf1@midea.com.cn

. Version1.1(2016-04-27)Page1of1QB-SA-041 BestRegards, Signature:

PrintName:XueWenfei Title:Engineer TEL:+86-0757-23606480Email:xuewf1@midea.com.cn

. Version1.1(2016-04-27)Page1of1QB-SA-041

Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd No.6, Yong An Road, Beijiao, Shunde, Foshan,Guangdong,China TEL:+86-0757-23606480 Email: xuewf1@midea.com.cn FCC Confidential Authorization Date: 2022-3-31 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: VG8EM134AYYMW In accordance with Sections 0.457 and 0.459 of the Commissions Rules, Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd hereby requests long-

term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description The above materials contain proprietary and confident Signature: ial information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Print Name: Xue Wenfei Title: Engineer

Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd Address: No.6, Yong An Road, Beijiao, Shunde, Foshan,Guangdong,China Tel: +86-0757-23606480 Email: xuewf1@midea.com.cn FCC Authorization Date: 2022-3-31 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd, the undersigned, hereby authorizes Shenzhen Accurate Technology Co.,Ltd. to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Shenzhen Accurate Technology Co.,Ltd. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, This authorization is valid until further written notice from the applicant. 21 U.S.C. 862. Sincerely Yours, Signature:

Print Name: Xue Wenfei Titel: Engineer QA-FR-170-B 7/29/2014