FCC ID: VG8XM025FXX-Y Microwave Oven

Microwave Oven INSTRUCTION MANUAL Read these instructions carefully before using your microwave oven, and keep it carefully. If you follow the instructions, your oven will provide you with many years of good service. SAVE THESE INSTRUCTIONS CAREFULLY PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY

(a) Do not attempt to operate this oven with the door open since this can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks.

(b) Do not place any object between the oven front face and the door or allow soil or cleaner residue to accumulate on sealing surfaces.

(c) Do not operate the oven if it is damaged. It is particularly important that the oven door closes properly and that there is no damage to the:

(1) DOOR (bent)

(2) HINGES AND LATCHES (broken or loosened)

(3) DOOR SEALS AND SEALING SURFACE

(d) The oven should not be adjusted or repaired by anyone except properly qualified service personnel. Specifications Model:

Rated Voltage:

Rated Input Power(Microwave):

Rated Output Power(Microwave):

Oven Capacity:

EM025FJT 120V~ 60Hz 1500W 1000W 0.9 Cu.ft. External Dimensions :

20.1X16.9X12.2 inch Net Weight:

Approx. 32.4 Lbs 2 IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of burns, electric shock, fire,injury to persons or exposure to excessive microwave oven energy when using your appliance, follow basic safety precautions, including the following:

1. Read all instructions before using the 8. Use this appliance only for its intended appliance. 2. Read and follow the specific: "PRECAU-

TIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY"

found on page 2. 3. As with most cooking appliances, close supervision is necessary to reduce the risk of a fire in the oven cavity. 4.To reduce the risk of fire in the oven cavity:

i). Do not overcook food. Carefully attend the appliance when paper, plastic, or other combustible materials are placed inside the oven to facilitate cooking. ii).Remove wire twist-ties and metal handles from paper or plastic containers/bags before placing them in the oven. iii). If materials inside the oven ignite, keep the oven door closed. Turn the oven off, and unplug the appliance. Disconnect the power cord, shut off power at the fuse or circuit breaker panel. iv). Do not use the oven cavity for storage purposes. Do not leave paper products, cooking utensils, or food in the cavity when not in use. 5. This oven must be grounded. Connect only to properly grounded outlet. See

"GROUNDING INSTRUCTIONS" found on page 4. 6. Install or locate this oven only in accordance with the installation instructions provided. 7. Some products such as whole eggs and sealed containers-for example, closed glass jars-are able to explode and should not be heated in the oven. 3 uses as described in this manual. Do not use corrosive chemicals or vapors in this appliance. This oven is specifically designed to heat or cook or dry food. It is not designed for industrial or laboratory use. 9. As with any appliance, close supervision is necessary when used by children. 10. Do not operate this oven if it has a damaged cord or plug, if it is not working properly or if it has been damaged or dropped. 11. This appliance should be serviced only by qualified service technicians. Contact the nearest authorized service facility for examination, repair or adjustment. 12. Do not cover or block any openings on 13. Do not store or use this appliance the oven. outdoors. 14. Do not use this oven near water, for example, near a kitchen sink, in a wet basement, near a swimming pool, or similar locations. 15. Do not immerse cord or plug in water. 16. Keep cord away from heated surfaces. 17. Do not let cord hang over edge of table or counter. 18. When cleaning surfaces of door and oven that comes together on closing the door, use only mild, nonabrasive soaps or detergents applied with a sponge or soft cloth. 19. Liquids, such as water, coffee, or tea are able to be overheated beyond the boiling point without appearing to be boiling. Visible bubbling or boiling when the container is removed from the microwave oven is not always present. THIS COULD RESULT IN VERY HOT LIQUIDS SUDDENLY BOILING OVER WHEN THE CONTAINER IS DISTURBED OR A SPOON OR OTHER UTENSIL IS INSERTED INTO THE LIQUID. i) Do not overheat the liquid. ii) Stir the liquid both before and halfway through heating it. iii) Do not use straight-sided containers with narrow necks. iv) After heating, allow the container to stand in the microwave oven for a short time before removing the container. v) Use extreme care when inserting a spoon or other utensil into the container. SAVE THESE INSTRUCTIONS GROUNDING INSTRUCTIONS DANGER Electric Shock Hazard Touching some of the internal components can cause serious personal injury or death. Do not disassemble this appliance. WARNING Electric Shock Hazard Improper use of the grounding can result in electric shock. Do not plug into an outlet until appliance is properly installed and grounded. Three-pronged

(grounding) plug This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. Consult a qualified electrician or serviceman if the grounding instructions are not completely understood or if doubt exists as to whether the appliance is properly grounded. If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-pronged grounding plug, and a 3-slot receptacle that will accept the plug on the appliance. The marked rating of the extension cord shall be equal to or greater than the electrical rating of the appliance. 4 1. A short power-supply cord is provided to reduce the risks resulting from becoming entangled in 2. Longer cord sets or extension cords are available and may be used if cared is exercised in or tripping over a longer cord. their use. 3. If a long cord sets or extension cord is used:

1) The marked electrical rating of the cord set or extension marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance. 2) The extension cord must be a grounding-type 3-wire cord; and 3) The longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally. Radio Interference 1. Operation of the microwave oven may cause interference to your radio, TV 2. When there is interference, it may be reduced or eliminated by taking the or similar equipment. following measures:

1) Clean door and sealing surface of the oven 2) Reorient the receiving antenna of radio or television. 3) Relocate the microwave oven with respect to the receiver. 4) Move the microwave oven away from the receiver. 5) Plug the microwave oven into a different outlet so that microwave oven and receiver are on different branch circuits. UTENSILS CAUTION Personal Injury Hazard Tightly-closed utensils could explode. Closed containers should be opened and plastic pouches should be pierced before cooking. See the instructions on "Materials you can use in microwave oven or to be avoided in microwave oven."

There may be certain non-metallic utensils that are not safe to use for microwaving. If in doubt, you can test the utensil in question following the procedure below. Utensil Test:

1. Fill a microwave-safe container with 1 cup of cold water (250ml) along with the utensil in question. 2. Cook on maximum power for 1 minute. 3. Carefully feel the utensil. If the empty utensil is warm, do not use it for microwave cooking. 4. Do not exceed 1 minute cooking time. 5 Materials you can use in microwave oven Utensils Remarks Aluminum foil Browning dish Dinnerware Glass jars Glassware Oven cooking bags Paper plates and cups Paper towels Parchment paper Plastic Plastic wrap Shielding only. Small smooth pieces can be used to cover thin parts of meat or poultry to prevent overcooking. Arcing can occur if foil is too close to oven walls. The foil should be at least 1 inch (2.5cm) away from oven walls. Follow manufacturers instructions. The bottom of browning dish must be at least 3/16 inch (5mm) above the turntable. Incorrect usage may cause the turntable to break. Microwave-safe only. Follow manufacturer's instructions. Do not use cracked or chipped dishes. Always remove lid. Use only to heat food until just warm. Most glass jars are not heat resistant and may break. Heat-resistant oven glassware only. Make sure there is no metallic trim. Do not use cracked or chipped dishes. Follow manufacturers instructions. Do not close with metal tie. Make slits to allow steam to escape. Use for shortterm cooking/warming only. Do not leave oven unattended while cooking. Use to cover food for reheating and absorbing fat. Use with supervision for a short-term cooking only. Use as a cover to prevent splattering or a wrap for steaming. Microwave-safe only. Follow the manufacturers instructions. Should be labeled "Microwave Safe". Some plastic containers soften, as the food inside gets hot. "Boiling bags" and tightly closed plastic bags should be slit, pierced or vented as directed by package. Microwave-safe only. Use to cover food during cooking to retain moisture. Do not allow plastic wrap to touch food. Thermometers Microwave-safe only (meat and candy thermometers). Wax paper Use as a cover to prevent splattering and retain moisture. Materials to be avoided in microwave oven Utensils Remarks Aluminum tray Food carton with metal handle Metal or metal-

trimmed utensils Metal twist ties Paper bags Plastic foam Wood May cause arcing. Transfer food into microwave-safe dish. May cause arcing. Transfer food into microwave-safe dish. Metal shields the food from microwave energy. Metal trim may cause arcing. May cause arcing and could cause a fire in the oven. May cause a fire in the oven. Plastic foam may melt or contaminate the liquid inside when exposed to high temperature. Wood will dry out when used in the microwave oven and may split or crack. 6 SETTING UP YOUR OVEN Names of Oven Parts and Accessories Remove the oven and all materials from the carton and oven cavity. Your oven comes with the following accessories:

Instruction Manual 1 A C D B A) Control panel B) Observation window C) Door assembly D) Safety interlock system Note: 1) Don't press the ceramic board forcibly. 2) Take and put the ceramic board gently during the operation. 3) After the unit be using, don't touch the ceramic board by hand because of the high temperature. 7 Countertop Installation Remove all packing material and accessories. Examine the oven for any damage such as dents or broken door. Do not install if oven is damaged. Cabinet: Remove any protective film found on the microwave oven cabinet surface. Do not remove the light brown Mica cover that is attached to the oven cavity to protect the magnetron. Installation 1. Select a level surface that provide enough open space for the intake and/or outlet vents. 12 inch(30cm) 3.0 inch(7.5cm) OPEN 3.0 inch(7.5cm) A minimum clearance of 3.0 inches

(7.5cm) is required between the oven and any adjacent walls. One side must be open.

(1) Leave a minimum clearance of 12 inches (30cm) above the oven.

(2) Do not remove the legs from the bottom of the oven.

(3) Blocking the intake and/or outlet openings can damage the oven.

(4) Place the oven as far away from radios and TV as possible. Operation of microwave oven may cause interference to your radio or TV reception. 2. Plug your oven into a standard household outlet. Be sure the voltage and the frequency is the same as the voltage and the frequency on the rating label. WARNING: Do not install oven over a range cooktop or other heat-producing appliance. If installed near or over a heat source, the oven could be damaged and the warranty would be void. 8 Cleaning Instructions Always keep the oven clean 1. Cleaning the glass viewing window, the inner door panel and oven front face. For best performance and to maintain the high degree of safety, the inner door panel and oven front face should be free of food or grease build-up. Wipe these parts with a mild detergent, rinse and wipe dry. Never use abrasive powders or pads. 2. Cleaning the control panel and plastic parts. Do not apply a detergent or an alkaline liquid spray to the control panel and plastic parts, as this may cause damage to these parts. Use a dry cloth (not a soaked cloth) to clean these parts. 3. Cleaning the oven interior After use be sure to clean up spilled liquids, spattered oil and food debris as quickly as possible. If the oven is used when dirty, efficiency drops and the dirt gets stuck on the oven surface and may cause bad odours. Clean the interior with a cloth soaked in luke-warm water with a mild detergent dissolved in it, then rinse the soap off with a damp cloth. CAUTION: Do Not wipe plastic and painted sections of the oven with bleach, thinners or other cleaning agents, as this may cause these parts to dissolve or change sharp. 9 OPERATION INSTRUCTION Five power levels are available. Level Power Display High 100%

PL10 M. High 70%

PL7 Med. 50%

PL5 Defrost Hold 20%

PL2 0%

PL0 Appendix. A User Options Items bolded below are the default values. Option EOC Tone 1 2 3 4 Beeper Volume Beeper On/Off Keyboard Window 5 On the Fly 6 Door Reset 7 Max time 8 Manual Programming Double Digit 9 0 Clean Filter Setting OP:10 OP:11 OP:12 OP:20 OP:21 OP:22 OP:23 OP:30 OP:31 OP:40 OP:41 OP:42 OP:43 OP:50 OP:51 OP:60 OP:61 OP:70 OP:71 OP:80 OP:81 OP:90 OP:91 OP:00 OP:01 OP:02 OP:03 Discription 3 seconds beep Continuous beep 5 quick beeps,Repeating Beeper Off Low Medium High Keybeep Off Keybeep On 15 seconds 30 seconds 60 seconds 120 seconds On-the-Fly Disable On-the-Fly Enable Door reset Disable Door Reset Enable 60 Minute Maximum Cook Time 10 Minute Maximum Cook Time Manual Programming Disable Manual Programming Enable Single Digit Mode-10 programs Doule Digit Mode-100 programs Off-Never Display Clean Filter Weekly-Display every 7 days Monthly-Display every 30 days Quarterly-Display every 90 days. 11 Appendix. B Default Cook Times The oven shall ship with the following Preset Cook Times unless otherwise noted in the product Specification. Button Display (Time) Cook Factors 1 2 3 4 5 6 7 8 9 0 0:10 0:20 0:30 0:45 1:00 1:30 2:00 3:00 4:00 5:00 Power 100%

100%

100%

100%

100%

100%

100%

100%

100%

100%

80%

80%

80%

80%

80%

80%

80%

80%

80%

80%

12 _ _ _ _

" " displays when the oven is electrified for the first time. If " " button pressed, the oven will change to idle mode. Note: Under idle mode, no button can be pressed. 1) Entry.The oven shall enter idle mode after a set of seconds have expired in Ready Mode without a keyboard press or a door open and close. The number of seconds is determined by the keyboard Timeout Window, set by User Option 4. 2) During idle mode, LED is blank.And there shall be no oven activity. 3) Opening and then closing the oven door, the oven will exit the idle mode and into 1. Power Up 2. Idle Mode ready mode. 3. Ready Mode 1) In this mode, the oven is ready to either begin a manual or preset cook cycle. 2) Opening and closing the door while the oven is in Idle Mode will put the oven into Ready Mode. 2) During Ready Mode, "0:00" displays. 3) From the Ready Mode, the oven can go to almost all of the other modes. 4. Door Open Mode 1) While the door of the oven is open, the oven shall be in Door Open Mode. This shall also allow for entry into Programming Mode. Whenever the door is open, the oven shal enter this mode. 2) During this mode, LED is blank. And the fan and oven lamp work. 3) When the door is closed, if User Option OP:60 is selected and the oven was running a manual or preset cook cycle, the oven shall enter Pause Mode. In all other cases, the oven shall return to Ready Mode with User Option OP:61 set,opening and closing the door will clear out any information about a Manual or Preset Program which was running. 13 5. Pause Mode stir the food item. 1) This mode allow the users to temporarily stop the cooking cycle to inspect or 2) While in Manual Cook Mode, or Preset Program Cook Mode, if the door is open or closed, or if the " " pad is pressed, the oven will enter Pause Mode. 3) While paused, LED will display the remaining cooking time. 4) Pause Mode will expire back to Idle Mode in the exact fashion as Ready Mode, dependent on User Option 4. Additionally,if the " " button is pressed, the oven shall immediately enter Ready Mode.OR if press " " button, the oven will go into working mode. 6. Manual Cook Entry Mode 1) The user may manuallly enter a cook time and power level while in this mode. 2) While the oven is in the Ready Mode,pressing the pad on the keyboard will put the oven into Manual Cook Entry Mode. 3) During this mode, "00:00" displays 4) If you press " "," "," " or " " button to select power level, LED will display the related power. If the same button pressed twice, the power will change to PL10. If no power chosen, "PL0" is default. 5) During setting process, press " " to enter Manual Cook Mode. Press " " to enter Ready Mode. 7. Manual Cook Mode 1) This mode allows cooking of the food items.While in Manual Cook Entry Mode, pressing the " " pad will cause to the oven to begin Manual Cook Mode. 2) During this mode, remaning cooking time displays. The fan and oven lamp will light. 3) When cooking program finish, the oven will enter End of Cook Cycle Mode. If you press " " button under this mode,the oven will enter Pause Mode. 14 8. End of Cook Cycle Mode 1) After the time has expired in a Manual Cook Mode, or a Preset Program Cook Mode, the oven shall go into The End of Cook Cycle Mode.

(2) During this mode, "End" displays.

(3) If either User Option OP:11 or "OP:12" is selected, the oven shall continue to sound until the user acknowledges this by either opening and closing the door or pressing the " "

pad. If User Option OP:12 is selected, after the 3 second beep, the oven shall go into Ready Mode. 9. Preset Program Cook Mode 1) This mode allows cooking of food items through a one pad touch operation. While in Ready Mode,pressing one of thr digit keys on the keyboard will cause the oven to run the Preset Program associated with that key. 2) LED displays the remaining cooking time. If it is multi-stage cooking, the total remaning cooking time displays not a particular stage cooking time.

(3) If the program chosen exceeds the maximum time allowed by User Option 7, then the oven shall beep three times rapidly and display 00:00 to indicate that the program is unacceptable.

(4) When cooking program finish, the oven will enter End of Cook Cycle Mode. If you press " " button under this mode,the oven will enter Pause Mode. 10. On the Fly Cooking 1) The use may start another cook cycle while the oven is cooking or paused. 2) While the oven is cooking or under Pause Mode, if User Option OP:51 is selected press number buttons, the preset cooking program will start automatically. 2) LED displays the remaining cooking time.

(3) When cooking program finish, the oven will enter End of Cook Cycle Mode. If you press " " button under this mode,the oven will enter Pause Mode. 15 11. Programming Mode This mode allows the user to assign cook times and power levels to the once touche button.1) Open the door and press "1" for 5 seconds,the buzzer will sound once and enter to Programming Mode. 2) "ProG" displays.3) Press " " button, LED will display the saved time, then you can input the time you need. 4) Press " "," "," " or " " to input the power level. LED will display the related power. If the same button pressed twice, the power will change to PL10. If no power chosen, "PL0" is default. 5) To change the cooking fators: If press "2X",LED will display "CF:XX". The default factor is 80%. "CF:80" displays. If you need to change the cooking power, just press one of the number buttons to set. 6) After setting the time and power, press " ", the cooking program will be saved. When the program saved, "ProG" displays. 7) If all the cooking time exceeds the MAX.time User Option 7, when press

" " to save the program, the buzzer will sound three times briefly and LED will diaply

"00:00" to tell you the time is no use. And then LED turn back to show "ProG". The time set before will be no change. 8) Close the door, the oven will turn back to Ready Mode. If press " " button during setting process, the oven turn to Door Open Mode. The program that not saved will be lost. If there is program saved as memory procedure, press the related number button, the saved program will start. If no saved program, the buzzer will alarm when pressing number button and it will not work. For example: set the program as memory cooking. Program; Power level PL7 and cooking time is 1 minute and 25 seconds. Step1: In waiting state, press number button "1" for 5 seconds,"ProG" displays. Step 2: Press number button "3", the program will be saved in "3". Step 3: Press " ", "0:00" displays. Step 4: Press number buttons "1", "2" and "5" to input the cooking time. Step 5: Press " " button," PL7" displays. Setting finished. Step 6: Press " " to save. When use the program next time, just press "3", the related program will start. Note:

1. If the electricity is cut off, the saved program will not lost. 2. If the program need to reset , just repeat the aboved steps. 3. If press " " at the last step, it will turn back to Ready Mode. The setting will be no use. 16 12. Double Quantity cooking 1) Through the use of the X2 pad, the user can easily set the time two of a particalar 2) Under waiting state, press "X2" button and then press number buttons 0-9 in 5 seconds, the oven will start cooking with the quantity preset cooking time. 3) Press "X2", "doub" displays. When press number buttons, LED will display the quantity food item. preset time. For example, number button "5" and its preset time is 1 minute. Then press "X2", then time will change to 1:00*(1+0.8)=1:48 4) When cooking program finish, the oven will enter End of Cook Cycle Mode. Note: This function cannot be used under memory mode. 13. Stage Cooking Programming This allows the user to cook food items at combination of various Power Levels. 1) Three stages can be set at most under cooking mode or memory mode. Aftet setting the power and time for the first stage, press " " to set the second stage. And the same step to set the third stage. 2) When setting the second or the third stage, press " ", "S-2" or "S-3" displays.3) Press " " button to start cooking. Example: To set three stages as memory mode. The first stageis PL7 and time is 1 minute 25 seconds. The second stage is PL5 and 5 minutes and 40 seconds. The steps are follow. a. Waiting state, press "1" for 5 seconds, LED displays "ProG". b. Press number buttons "3" to save the program in "3". c. Press " ","00:00" displays. d. Press "1","2","5" to input the cooking time. "1:25" displays. e. Press " ", "PL7" displays. The first stage is finished. f. Press " ", LED displays "2". g. Press "5", "4","0" button, "5:40" displays. h. Press " ", "PL5" displays. The second stage is finished. 17 14. Use Option Mode This allows the user choose between various ways for the oven to operate. 1) Open the oven door and press "2" for 5 seconds. The buzzer sounds once and enter this mode. 2) LED displays "OP: - -".

"OP:20" .....in cycle. Ready Mode. way. 3) Press any number button to enter related mode setting. For example: to set the voice of the buzzer to medium. Press " 2 ", "OP:22" displays. If you want to change, keep pressing "2", LED displays "OP:20", "OP:21","OP:22","OP:23", 4) Press " " to save the current setting. After saved, "OP: - -" display again. 5) During setting process, press " " to enter Door Open Mode. Close the door will enter 6) If " " button not pressed at the last step, the program cannot be saved but stay at previous 15. Service Mode1) Open the oven door and press "3" for 5 seconds to enter service mode. 2) LED displays "SErU". 3) To check the times of closing or opening the door, just press number button "3", LED will display the times.

"4-CL" displays. 4) Press " " and then press number button "4" in 4 seconds, the message will be cancelled. 5) Press " " to enter Door Open Mode. Close the door will enter Ready Mode. 16. Inqury Function During microwave cooking process, press " " to check the power level. LED display the power for 3 seconds then turn back to previous state. It is available for multi-stage cooking. 18 Maintenance Troubleshooting Check your problem by using the chart below and try the solutions for each problem. If the microwave oven still does not work properly, contact the nearest authorized service center. TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY Oven will not start a. Electrical cord for oven is not plugged in. b. Door is open. c. Wrong operation is set. a. Plug into the outlet. b. Close the door and try again. c. Check instructions. Arcing or sparking Unevenly cooked foods a. Materials to be avoided in microwave oven were used. b. The oven is operated when empty. c. Spilled food remains in the cavity. a. Materials to be avoided in microwave oven were used. b. Food is not defrosted completely. c. Cooking time, power level is not suitble. d. Food is not turned or stirred. a. Use microwave-safe cookware only. b. Do not operate with oven empty. c. Clean cavity with wet towel. a. Use microwave-safe cookware only. b. Completely defrost food. c. Use correct cooking time, power level. d. Turn or stir food. Overcooked foods Cooking time, power level is not suitable. Use correct cooking time, power level. Undercooked foods a. Materials to be avoided in microwave oven were used. b. Food is not defrosted completely. c. Oven ventilation ports are restricted. d. Cooking time, power level is not suitable. a. Use microwave-safe cookware only. b. Completely defrost food. c. Check to see that oven venti-

lation ports are not restricted. d. Use correct cooking time, power level. Improper defrosting a. Materials to be avoided in microwave oven were used. b. Cooking time, power level is not suitable. c. Food is not turned or stirred. a. Use microwave-safe cookware only. b. Use correct cooking time, power level. c. Turn or stir food. 19

160*80 ULPGDQ2 160X80mm UL MODEL: AM025FJT INPUT 120V~60Hz SINGLE PHASE 1500W OUTPUT 1000W, 2450MHz MANUFACTURE DATE:

FCC ID:VG8XM025FXX-Y MADE IN SHUNDE CHINA THIS DEVICE COMPLIES WITH DHHS RADIATION PERFORMANCE STANDARDS 21 CFR SUBCHAPTER J. Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd. CAUTION THIS DEVICE IS TO BE SERVICED ONLY BY PROPERLY QUALIFIED SERVICE PERSONNEL. CONSULT THE SERVICE MANUAL FOR PROPER SERVICE PROCEDURES TO ASSURE CONTINUED COMPLIANCE WITH THE FEDERAL PERFORMANCE STANDARD FOR MICROWAVE OVENS AND FOR PRECAUTIONS TO BE TAKEN TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY. WARNING TO ENSURE CONTINUED PROTECTION AGAINST ELECTRICAL SHOCK HAZARD, CONNECT TO PROPERLY GROUNDED OUTLETS ONLY.DISCONNECT APPLIANCE BEFORE SERVICING. REMOVAL OF OUTERCASE WITH PRODUCT ENERGIZED MAY EXPOSE SERVICEMAN TO HAZARDOUS HIGH VOLTAGE POTENTIALS. CERTAIN INTERNAL PARTS ARE INTENTIONALLY NOT GROUNDED AND MAY PRESENT A RISK OF ELECTRIC SHOCK ONLY DURING SERVICING.SERVICE PERSONNEL

-DO NOT CONTACT THE FOLLOWING PARTS WHILE THE APPLIANCE IS ENERGIZED: IF PROVIDED FAN MOTOR, TURNTABLE MOTOR, DAMPER MOTOR,L.V.TRANSFORMER

(TOUCH CONTROL TYPE) OR TIMER MOTOR ASSEMBLY

(MECHANICAL TYPE). RISK OF ELECTRIC SHOCK. NON-REMOVABLE FASTENERS ARE PROVIDED BECAUSE OF INTERNAL HIGH VOLTAGES. DO NOT REMOVE FASTENERS. NOT FOR BUILT-IN INSTALLATION.

Web Site: www.midea.com.cn E-Mail: xuewf1@midea.com.cn Address: No.6, Yong An Road, Beijiao, Shunde, Foshan, Guangdong, P.R. China Phone : +86-757-23606480 Fax : +86-757-26656995 Authority to Act as Agent Date:

2020-09-07 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

Jawen Yin from ECMG Electronic Technical Testing Corp (Shenzhen)._ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 2021-03-06____ By:

(Signature1) _Xue wenfei__________

(Print name) Title: _ Certification engineer _________________________ On behalf of: Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd.

(Company Name) Telephone:

_86-757-2360 6480__________________________ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022311 6

Web Site: www.midea.com.cn E-Mail: xuewf1@midea.com.cn Address: No.6, Yong An Road, Beijiao, Shunde, Foshan, Guangdong, P.R. China Phone : +86-757-23606480 Fax : +86-757-26656995 Request for Confidentiality Date: 2020-09-07_______ Subject: Confidentiality Request for: _FCC ID: VG8XM025FXX-Y Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent*2 Permanent Permanent Permanent Permanent Permanent*

Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual

*Note: ______(Insert Explanation as Necessary)______ Guangdong Midea Microwave and Electrical Appliances Manufacturing Co.,Ltd._ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180)3___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. 2 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting. 3 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 022311 6 Web Site: www.midea.com.cn E-Mail: xuewf1@midea.com.cn Sincerely, Address: No.6, Yong An Road, Beijiao, Shunde, Foshan, Guangdong, P.R. China Phone : +86-757-23606480 Fax : +86-757-26656995 By:

(Signature/Title4) Xue wenfei______

(Print name) 4 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022311 6

Request for Class Permissive Change(C2PC) FCC ID: VG8XM025FXX-Y Data: 2020-8-30 TO: Federal Communication Commission Please be notified that we, the undersigned, Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd. declare that the reasons for this class II permissive change are as below:

The original Grant Date is 03/10/2012. 1. Changed Mother -board as below. The original top /Bottom view The new top /Bottom view Note :

The new mother board is a switching power supply instead of the original linear transformer scheme. They have the same input, output and power except for PCB layout and some electronic component differences. 2. The model of High-voltage transformer is changed from MD-101AMR-1 to MD-101AMR-3. 3. Everything elses are the same as before. Sincerely, xue wenfei Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd. Phone : +86-757-26306480 FAX :+86-757-26656995 E-Mail: xuewf1@midea.com.cn

Request for Class Permissive Change(C2PC) FCC ID: VG8XM025FXX-Y Data: 2020-7-8 TO: Federal Communication Commission Please be notified that we, the undersigned, Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd. declare that the reasons for this class II permissive change are as below:

1. Changed Mother -board as below. Original Mother board-top view New Mother board top view Changed PCB layout and some electronic components. Input/output and power are the same as before. 2. The EUT exterior view as below:

The original front/back view(AM series) The new front/back view(AM series) AM series and EM series only control keypad type differences. Others are the same as before. A is rotating type knob type, E is film type keypad. Sincerely, xue wenfei Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd. Phone : +86-757-26306480 FAX :+86-757-26656995 E-Mail: xuewf1@midea.com.cn

Web Site: www.midea.com.cn E-Mail: xuewf1@midea.com.cn Address: No.6, Yong An Road, Beijiao, Shunde, Foshan, Guangdong, P.R. China Phone : +86-757-23606480 Fax : +86-757-26656995 Request for Confidentiality Date: July 8, 2020________ Subject: Confidentiality Request for: _FCC ID: VG8XM025FXX-Y__ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent*2 Permanent Permanent Permanent Permanent Permanent*

Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual

*Note: ______(Insert Explanation as Necessary)______ Guangdong Midea Microwave and Electrical Appliances Manufacturing Co.,Ltd._ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180)3___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. 2 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting. 3 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 022311 6 Web Site: www.midea.com.cn Address: No.6, Yong An Road, Beijiao, Shunde, Foshan, E-Mail: xuewf1@midea.com.cn Guangdong, P.R. China Phone : +86-757-23606480 Fax : +86-757-26656995 Sincerely, By:

(Signature/Title4) Xue wenfei______

(Print name) 4 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022311 6