FCC ID: VG8XM031MYY-PV5 Microwave Oven

Model: EM031M2SD-PVH Read these instructions carefully before using your microwave oven, and keep it carefully. If you follow the instructions, your oven will provide you with many years of good service. SAVE THESE INSTRUCTIONS CAREFULLY PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY

(a) Do not attempt to operate this oven with the door open since operation can result in harmful exposure to microwave energy. open door It is important not to defeat or tamper with the safety interlocks.

(b) Do not place any object between the oven front face and the door or allows soil or cleaner residue to accumulate on sealing surfaces.

(c) Do not operate the oven if it is damaged. It is particular the oven door close properly and that there is no damage to the:

ly important that

(1) DOOR (bent)

(2) HINGES AND LATCHES (broken or loosened)

(3) DOOR SEALS AND SEALING SURFACE S

(d) The oven should not be adjusted or repaired by anyone except properly qualified service personnel. Specifications 2 IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety the following:

precautions should be followed, including WARNING -

To reduce the risk of burns, electric shock, fire, injury to persons or exposure to excessive microwave energy:

1. Read all instructions before using the appliance. 2. Read and follow the specific:

"PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY" found on page 2. 3. This appliance must be grounded. Connect only to properly grounded outlet. See

"GROUNDING INSTRUCTIONS"

4. Install or locate this appliance only in found on page 4. accordance with the provided installation instructions. 5. Some products such as whole eggs and sealed containers - for example, closed glass jars - are able to explode and should not be heated in this oven. 6. Use this appliance only for its intended use as described in the manual. Do not use corrosive chemicals or vapors in this appliance. This type of oven is specifically designed to heat, cook or dry food. It is not designed for industrial or laboratory use. 7. As with any appliance, close 8. Do not operate this appliance if it has a properly, or if it has been damaged or dropped. supervision is necessary when used by children. damaged cord or plug, if it is not working 9. This appliance should be serviced only by qualified service personnel. Contact nearest authorized service facility for examination, repair, or 10. Do not cover or block any openings on the appliance. 11. Do not store this appliance outdoors. Do not use this product near water - for adjustment. example, near a kitchen sink, in a wet basement, near a swimming pool, or similar location. 2 3 1 . Do not immerse cord or plug in water. 1 . Keep cord away from heated surface. 14. Do not let cord hang over edge of 15. When cleaning surfaces of door and oven that comes together on closing the door, use only mild, nonabrasive soaps, or detergent applied with a sponge or soft cloth. table or counter. 16. To reduce the risk of fire in the oven cavity:

1). Do not overcook food. Carefully attend appliance when paper, plastic, or other combustible materials are placed inside the oven to facilitate cooking. 2). Remove wire twist-ties from paper or plastic bag before placing bag in oven. 3). If material inside of the oven ignite, keep oven door closed, turn oven off, and disconnect the power cord, or shut off power at the fuse or circuit breaker panel. 4). Do not use the cavity for storage purposes. Do not leave paper products, cooking utensils, or food in the cavity when not in use. 17. Liquids, such as water, coffee, or tea are able to be overheated beyond the boiling point without appearing to be boiling. Visible bubbling or boiling when the container is removed from the microwave oven is not always present. 3 THIS COULD RESULT IN VERY HOT LIQUID SUDDENLY BOILING OVER WHEN THE CONTAINER IS DISTURBED OR A UTENSIL IS INSERTED INTO THE LIQUID. To reduce the risk of injury to persons:

1) Do not overheat the liquid. 2) Stir the liquid both before and halfway through heating it. 3) Do not use straight-sided containers with narrow necks. 4) After heating, allow the container to before removing the container. 5) Use extreme care when inserting a spoon or other utensil into the container. stand in the microwave oven for a short time SA E THESE INSTRUCTIONS V GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the appliance is equipped with a cord having a must be plugged into an outlet that is properly installed and grounded. grounding wire with a grounding plug. electric current. This The plug WARNING - Improper use of the grounding can result in a risk of electric shock. understood, Consult a qualified electrician or serviceman if the grounding instructions are not completely or if doubt exists as to whether the appliance is properly grounded. If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-blade grounded plug, and 3-slot receptacle that will accept the plug on the appliance. The marked rating of the extension cord shall be equal to or greater than the electrical rating of the appliance. Electric Shock Hazard DANGER -

Touching some of the internal components can cause serious personal injury or death. Do not disassemble this appliance. Electric Shock Hazard WARNING -

Improper use of the grounding can result in electric shock. Do not plug into an outlet until appliance is properly installed and grounded.

1. A short power supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord. 2. Longer cord sets or extension cords are available and may be used if care is exercised in their use. 3. If a long cord or extension cord is used:

1) The marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance. 2) The extension cord must be a grounding-type 3-wire cord. 3) The longer cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over unintentionally. 4 RADIO INTERFERENCE 1. Operation of the microwave oven may cause interference to your radio, TV or similar 2. When there is interference, it may be reduced or eliminated by taking the following equipment. measures:

1) Clean door and sealing surface of the oven 2) Reorient the receiving antenna of radio or television. 3) Relocate the microwave oven with respect to the receiver. 4) Move the microwave oven away from the receiver. 5) Plug the microwave oven into a different outlet so that microwave oven are on different branch circuits. and receiver UTENSILS Personal Injury Hazard CAUTION -

Tightly-closed utensils could explode. Closed containers should be opened and plastic pouches should be pierced before cooking. See the instructions on "Materials you can use in microwave oven or to be avoided in microwave oven."

There may be certain non-metallic utensils that are not safe to use for microwaving. If in doubt, you can test the utensil in question following the procedure below. Utensil Test:

utensil in question. 1. Fill a microwave-safe container with 1 cup of cold water (250ml) along with the 2. Cook on maximum power for 1 minute. 3. Carefully feel the utensil. If the empty utensil is warm, do not use it for microwave cooking. 4. Do not exceed 1 minute cooking time. 5 Materials you can use in microwave oven Utensils Remarks Aluminum foil Browning dish Dinnerware Glass jars Glassware Oven cooking bags Paper plates and cups Paper towels Parchment paper Plastic Plastic wrap Shielding only. Small smooth pieces can be used to cover thin parts of meat or poultry to prevent overcooking. Arcing can occur if foil is too close to oven walls. The foil should be at least 1 inch (2.5cm) away from oven walls. Follow manufacturer* instructions. The bottom of browning dish must be at least 3/16 inch (5mm) above the turntable. Incorrect usage may cause the turntable to break. Microwave-safe only. Follow manufacturer's instructions. Do not use cracked or chipped dishes. Always remove lid. Use only to heat food until just warm. Most glass jars are not heat resistant and may break. Heat-resistant oven glassware only. Make sure there is no metallic trim. Do not use cracked or chipped dishes. Follow manufacturer* instructions. Do not close with metal tie. Make slits to allow steam to escape. Use for short*erm cooking/warming only. Do not leave oven unattended while cooking. Use to cover food for reheating and absorbing fat. Use with supervision for a short-term cooking only. Use as a cover to prevent splattering or a wrap for steaming. Microwave-safe only. Follow the manufacturer* instructions. Should be labeled "Microwave Safe". Some plastic containers soften, as the food inside gets hot. "Boiling bags" and tightly closed plastic bags should be slit, pierced or vented as directed by package. Microwave-safe only. Use to cover food during cooking to retain moisture. Do not allow plastic wrap to touch food. Thermometers Microwave-safe only (meat and candy thermometers). Wax paper Use as a cover to prevent splattering and retain moisture. Materials to be avoided in microwave oven Utensils Remarks Aluminum tray Food carton with metal handle Metal or metal-

trimmed utensils Metal twist ties Paper bags Plastic foam Wood May cause arcing. Transfer food into microwave-safe dish. May cause arcing. Transfer food into microwave-safe dish. Metal shields the food from microwave energy. Metal trim may cause arcing. May cause arcing and could cause a fire in the oven. May cause a fire in the oven. Plastic foam may melt or contaminate the liquid inside when exposed to high temperature. Wood will dry out when used in the microwave oven and may split or crack. 6 SETTING UP YOUR OVEN Names of Oven Parts and Accessories Remove the oven and all materials from the carton and oven cavity. Your oven comes with the following accessories:

Glass tray 1 Turntable ring assembly 1 1 Instruction Manual F A E D C B A) Control panel B) Turntable shaft C) Turntable ring assembly D) Glass tray E) Observation window F) Door assembly G) Safety interlock system G Glass tray Turntable Installation Hub (underside) a. Never place the glass tray upside down. The glass tray should never be restricted. b. Both glass tray and turntable ring assembly must always be used during cooking. c. All food and containers of food are always placed on the glass tray for cooking. d. If glass tray or turntable ring assembly cracks or Turntable shaft breaks, contact your nearest authorized service center. Turntable ring assembly 7 Countertop Installation Remove all packing material and accessories. Examine the oven for any damage such as dents or broken door. Do not install if oven is damaged. Cabinet: Remove any protective film found on the microwave oven cabinet surface. Do not remove the light brown Mica cover that is attached to the oven cavity to protect the magnetron. Installation 1. Select a level surface that provide enough open space for the intake and/or outlet vents. 12 inch(30cm) 3.0 inch(7.5cm) OPEN 3.0 inch(7.5cm) A minimum clearance of 3.0 inches

(7.5cm) is required between the oven and any adjacent walls. One side must be open.

(1) Leave a minimum clearance of 12 inches (30cm) above the oven.

(2) Do not remove the legs from the bottom of the oven.

(3) Blocking the intake and/or outlet openings can damage the oven.

(4) Place the oven as far away from radios and TV as possible. Operation of microwave oven may cause interference to your radio or TV reception. 2. Plug your oven into a standard household outlet. Be sure the voltage and the frequency is the same as the voltage and the frequency on the rating label. WARNING: Do not install oven over a range cooktop or other heat-producing appliance. If installed near or over a heat source, the oven could be damaged and the warranty would be void. 8 OPERATION 9 MAINTENANCE Troubleshooting Check your problem by using the chart below and try the solutions for each problem. If the microwave oven still does not work properly, contact the nearest authorized service center. TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY Oven will not start a. Electrical cord for oven is not plugged in. b. Door is open. c. Wrong operation is set. a. Plug into the outlet. b. Close the door and try again. c. Check instructions. a. Materials to be avoided in microwave oven were used. a. Use microwave-safe cookware only. b. Do not operate with oven Arcing or sparking b. The oven is operated when empty. c. Clean cavity with wet towel. c. Spilled food remains in the empty. cavity. a. Materials to be avoided in microwave oven were used. b. Food is not defrosted a. Use microwave-safe cookware only. b. Completely defrost food. Unevenly cooked foods completely. c. Use correct cooking time, c. Cooking time, power level is not suit ble. a d. Food is not turned or stirred. power level. d. Turn or stir food. Overcooked foods Cooking time, power level is not suitable. Use correct cooking time, power level. Undercooked foods a. Materials to be avoided in a. Use microwave-safe microwave oven were used. cookware only. b. Food is not defrosted c. Oven ventilation ports are completely. restricted. not suitable. d. Cooking time, power level is b. Completely defrost food. c. Check to see that oven venti-

lation ports are not restricted. d. Use correct cooking time, power level. Improper defrosting a. Materials to be avoided in a. Use microwave-safe microwave oven were used. b. Cooking time, power level is cookware only. b. Use correct cooking time, not suitable. c. Food is not turned or stirred. power level. c. Turn or stir food. 10

Web Site: www.midea.com.cn E-Mail: xuewf1@midea.com.cn Address: No.6, Yong An Road, Beijiao, Shunde, Foshan, Guangdong, P.R. China Phone : +86-757-23606480 Fax : +86-757-26656995 Authority to Act as Agent Date: 2021-3-18 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

Jawen Yin from ECMG Electronic Technical Testing Corp (Shenzhen)._ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 2021-9-17 By:

(Signature1) _Xue wenfei__________

(Print name) Title: _ Certification engineer _________________________ On behalf of: Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd.

(Company Name) Telephone:

_86-757-2360 6480__________________________ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022311 6

Web Site: www.midea.com.cn E-Mail: xuewf1@midea.com.cn Address: No.6, Yong An Road, Beijiao, Shunde, Foshan, Guangdong, P.R. China Phone : +86-757-23606480 Fax : +86-757-26656995 Request for Confidentiality Date: 2021-5-17______ Subject: Confidentiality Request for: FCC ID: VG8XM031MYY-PV5 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent*2 Permanent Permanent Permanent Permanent Permanent*

Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual

*Note: ______(Insert Explanation as Necessary)______ Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180)3___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. 2 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting. 3 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 022311 6 Web Site: www.midea.com.cn E-Mail: xuewf1@midea.com.cn Sincerely, Address: No.6, Yong An Road, Beijiao, Shunde, Foshan, Guangdong, P.R. China Phone : +86-757-23606480 Fax : +86-757-26656995 By:

(Signature/Title4) Xue wenfei______

(Print name) 4 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022311 6