FCC ID: 2A2Y8PAVOTUBEII30XR LED RGBWW Pixel Tube Light

User manual 1Model and Product name: PavoTube 30XR LED RGBWW Pixel Tube Light 2Technical data:

Input: AC 100-240V 50/60Hz 70W Output: DC 15V/4A Max.60W Color Temperature: 2700-12000K CRI: 97 TLCI: 98 32.4GBluetooth and LUMENRADIO Remote Control PavoTube 30XR is able to be remotely controlled by 2.4G remote controller, or by NANLINK APP via the transmitter box or via Bluetooth directly. This product also has built-in lumenradio module, enabling it to receive CRMX wireless DMX signals. Note:

12.4G remote controller and transmitter box are sold separately. 2The fixture supports the 2.4G wireless protocol V1.0 and V2.0. Please set fixture to V2.0 while using WS-RC-C1 or WS-RC-C2 remote controller. Please set fixture to V1.0 while using other remote controllers. 4Safety Precautions 1) Please open the package to check for damage caused in transit, if damaged please do not use and contact place of purchase or manufacturer as soon as possible. 2) Please do not use a power cord with damaged insulation, do not unplug too hard or drag the power cord directly. 3) Make sure that the power supply voltage used matches the voltage designated by the light before installation. 4) Please turn the light off when it is not in use or before cleaning. 5) Please keep the light safely stored and away from children. 5Notice 1) Please do not place any object on the fixture or allow liquid to flow inside the fixture. 2) Please do not place the fixture near any flammable or volatile substances like alcohol or gasoline. 3) Please do not use strong detergent for cleaning. Please wipe off the dirt by using a cloth with neutral cleanser when cleaning the fixture. 4) Please set up the fixture in a dry and well-ventilated place. Please do not use it in any humid, dusty or overheated environment. The temperature of the environment for the PavoTube 30XR should not be higher than 45. Please do not operate or store the fixture around objects with high heat. 5) Please do not disassemble the fixture at will to repair by yourself. Qualified professionals should conduct maintenance under the condition of strictly following the operating procedures described in this manual. 6FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

LED RGBWW Pixel Tube Light Model: PavoTube 30XR FCC ID:

2A2Y8PAVOTUBEII30XR Contain FCC ID: XRSCRMXTIMO101 Label location

Mamiya America Corp Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation Guangdong Nanguang Photo&Video Systems Co., Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID): 2A2Y8PAVOTUBEII30XR Name and company of U.S. agent: Mamiya America Corp Physical U.S. address of agent: 75 Virginia Rd N. White Plains, NY 10603 United States FRN of U.S. agent: 0033618356 Email address of U.S. agent: waynes@macgroupus.com Mamiya America Corp acknowledges their obligation to accept service of process on behalf of Guangdong Nanguang Photo&Video Systems Co., Ltd. Guangdong Nanguang Photo&Video Systems Co., Ltd. accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). Sincerely, Signature

[Name] Junhua Lin

[Title] Certification Engineer 3 0 V

[Company] Guangdong Nanguang Photo&Video Systems Co., Ltd.

, U

) 7

) d

1 1 9

. 2 _ t n e g A _ S U

l e d o m

_ 8 4 Signature

[Name of U.S. agent] Wayne Schulman

[Title of U.S. agent] Vice President

[Company of U.S. agent] Mamiya America Corp The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC.

Guangdong Nanguang Photo&Video Systems Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 7/25/23 To whom it may concern:

We, [Guangdong Nanguang Photo&Video Systems Co., Ltd.], hereby certify that the equipment for which authorization is sought (FCC ID: [2A2Y8PAVOTUBEII30XR]) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). Sincerely, Signature

[Junhua Lin]

[Manager]

Guangdong Nanguang Photo&Video Systems Co., Ltd. The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01.