FCC ID: 2A2Y8-PAVOTUBEII30C RGBWW LED Tube Light

User manual 1Model and Product name: PavoTube 30C RGBWW LED Tube Light 2Technical data:

Input: AC 100-240V 50/60Hz Output: DC 15V/4A Max.60W Color Temperature: 2700-7500K CRI: 97 TLCI: 98 32.4GBluetooth Remote Control PavoTube 30C can be remotely controlled by 2.4G remote controller and by NANLINK APP via the WS-TB-1 transmitter box. It also has built-in bluetooth and can be controlled via bluetooth. Note:

1) 2.4G remote controller and transmitter box are sold separately. 2) The fixture supports the 2.4G wireless protocol V1.0 and V2.0. The fixture should be set in V2.0 while using WS-RC-C1 or WS-RC-C2 remote controller, set in V1.0 while using other remote controllers. 4Safety Precautions 1) Please open the package to check for damage caused in transit, if damaged please do not use and contact place of purchase or manufacturer as soon as possible. 2) Please do not use a power cord with damaged insulation, do not unplug too hard or drag the power cord directly. 3) Make sure that the power supply voltage used matches the voltage designated by the light before installation. 4) Please turn the light off when it is not in use or before cleaning. 5) Please keep the light safely stored and away from children. 5Notice 1) Please do not place any object on the fixture or allow liquid to flow inside the fixture. 2) Please do not place the fixture near any flammable or volatile substances like alcohol or gasoline. 3) Please do not use strong detergent for cleaning. Please wipe off the dirt by using a cloth with neutral cleanser when cleaning the fixture. 4) Please set up the fixture in a dry and well-ventilated place. Please do not use it in any humid, dusty or overheated environment. The temperature of the environment for the PavoTube 30C should not be higher than 40. Please do not operate or store the fixture around objects with high heat. 5) Please do not disassemble the fixture at will to repair by yourself. Qualified professionals should conduct maintenance under the condition of strictly following the operating procedures described in this manual. 6FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Guangdong Nanguang Photo&Video Systems Co., Ltd. Declaration concerning Antenna Specification It is hereby declared that the product Model No.: PavoTube 30C FCC ID : 2A2Y8-PAVOTUBEII30C fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for internal antenna type(s) described below:

Model No. of antenna: NB2400-128 FPC antenna Type of antenna:

2.32 dBi Gain of the antenna:

2402-2480MHz Frequency range:

The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name:

Address:

City:

ZIP / Postal code:

Country:

Place:

Signature:

Guangdong Nanguang Photo&Video Systems Co., Ltd. Dongli Section, Highway 324, Chenghai, Shantou City, Guangdong Province, China Shantou City, Guangdong Province,

China Date: 10/20/2022 version01

Product Number: NB2400-128 Product Name: 2.4GHz Antenna Specification For Approval Date: 2021/03/49 File No.:

een Version: 1.0 a enernreneenrerenenctiatine, Customer: JAR RIERA IRA a]

cee ehsanehtyensens netstat Customer P/N: /

te ehharneennennenenrweneesenunnemee Yi Zong P/N: NB2400-128 eens Description: 2.4GHz Antenna

\_f\ S Fa a eae

| J v4 YIZONG ELECTRONICS Page 1 Product Number: NB2400-128 Product Name: 2.4GHz Antenna Index:

1. Revision History / Page 3 2. Specification / Page 4 3. Characteristics and Reliability Test / Page 5 4. Antenna - S Parameter Test Data / Page 6 5. Antenna - Radiation Pattern Test Data / Page 7 6. Mechanical and Packing Drawing / Page 8 ~ 9 7. Material Description and RoHS Test Report / Page 10 ~ end Page 2 Product Number: NB2400-128 Product Name: 2.4GHz Antenna 1. Revision History Revision Date Change Notification Description 1.0 2021.03.19 WII Page 3 Product Number: NB2400-128 Product Name: 2.4GHz Antenna 2. Specification Sample Photo A. Electrical Characteristics Frequency 2400 ~ 2500 MHz V.S.W.R. S 2.0 Peak Gain Polarization Linear Impedance 50 Ohm B. Material & Mechanical Characteristics Material of Radiator CU Cable Type OD1.13mm Connector Type Mini Connector C. Environmental Operation Temperature -40C~+65C Storage Temperature -40 C ~+80C Product Number: NB2400-128 Product Name: 2.4GHz Antenna 3. Characteristics and Reliability Test Test Items Test Condition and Procedure Requirements C1 | S.W.R. Set DUT on Network Analyzer; make individual Directive DUT specification calibration to test C2 | Antenna Set DUT on Antenna Chamber; make individual Directive DUT specification Gain calibration to test M1 | Vibration GB / T2423 . 48-1997 1. No Visual Damage Amplitude: 0.03 inch (1.5mm); Freq: 20 to 80 to 20 Hz | 2. Frequency Tol.<= 5%

3 directions; 2 hours for each direction M2 | Random GB / T2423.8-1995 1. No parts separated Drop Height: 1.0 Meter; 2. Frequency Tol.<= 5%

3 directions; 1 time for each direction M3 | Solderability | GB 2423 . 28- 82 1. Mounted on PCB Solder iron: 26045C; Duration: 5 seconds 2. No Visual Damage M4 | Terminal- Holding with individual specification; force applied 1. Directive DUT specification Pull Test to axis of terminal 2. Frequency Tol.<= 5%

M5 | Terminal- Holding with individual specification; applied 1. Directive DUT specification Torque Test | clockwise and counterclockwise to the axis of 2. Frequency Tol.<= 5%

terminal M6 | Dimension Inspection of dimension, color, material, package, Directive DUT specification surface process E1 | Salt Spray GB /T 2423 . 17-93 After 2 Hours Recovery Temp: 35C; RH: >= 95%; NaCl solution: >= 5%; 1. No Visual Damage Time: 24 hours 2. Frequency Tol.<= 5%

E2 | Humidity GB /T 2423 .4-93 After 2 Hours Recovery Temp: 80C / 12 H; -40C / 12H RH: >= 90%; 1. No Visual Damage Time: 24 hours 2. Frequency Tol.<= 5%

E3 | Thermal GB /T 2423 . 22 - 87 After 2 Hours Recovery Shock 1 Cycle: - 40C (30 minutes) to + 80C (30 minutes) 1. No Visual Damage Cycles: 24 2. Frequency Tol.<= 5%

E4 | Life (High GB /T 2423.2 -89 After 2 Hours Recovery Temp.) Temp: 80C; Time: 24 hours 1. No Visual Damage 2. Frequency Tol.<= 5%

R1 | RoHS With Reference to IEC 62321:2008 with flow chart Directive RoHS 2011/65/EU R2 | PFOS With Reference to USA EPA 3540C:1996 by LC/MS Directive ROHS 2006/122/EC R3 | PFOA With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC Page 5 Product Number: NB2400-128 Product Name: 2.4GHz Antenna 4. Antenna - S Parameter Test Data 1 Active Ch/Trace 2Response 3 Stimulus 4 Mkr/Analysis 5 Instr State Pim 544 smith ae 2.000 1,500 1.000 ris 1 Start 2 GHz IFBW 70 kHz Stop 3 GHz (Ril i Print Abort Printing Printer Setup... Invert Image On Pew s: Cuno Screen Images, Multiport Test Set Setup 7 Misc Setup Backlight ON SSE Firmware Revision seamen mea |

Page 6 Product Number: NB2400-128 Product Name: 2.4GHz Antenna 5. Antenna - Radiation Pattern Test Data 2400 MHz 2450 MHz 2500 MHz 5 . rt i i

. B |) s iin ibe yi |.

Frequency 2400 2410-2420 2430-2440 2450-2460 470-2480 2490-2500 TRE (Bm) 233 229 217 196 173 16 145 4158 148 162 137 Peak EIRP (dBm) 189 17 18 189 212 217 232 197 204 201 209

\NHPRP -45 degree) 288 282 267 244 219 206 49 203 4191 20D 1.75 NHPRP #/-30 Gegree) = 3.91 383 362 334 3.06 292 275 287 275 28> 253 E-Theta Peak Gain @Bi) 9.22 9.7 -10.14 -10.13 11.06 -1041 -1028 -11.06 -11.32 -1134 -10.95 E-Phi Peak Gain (Bi) 186 169 4178 18 199 207 222 187 196 193 205

|E-Total Peak Gain @Bi) 1.890 LL 18 189 212 217 232 197 204 201 209 Directivity (dBi) 4.21 4 397 385 384 3.77 3.77 355 3.52 362 3.45 Efficiency (%) 58.54 58.99 60.73 6362 672 69.11 7168 6943 71.06 6891 72,90 6. Mechanical Drawing See attached files 7. Material Description and RoHS Test Report See attached files Page 7 Cable te /Z60\M of | es;

1. ea

* 1 =

W Note:

1.Take" > "is the important dimension. 2.Tolerance:Unmarked tolerance refer to the standard tolerance please. 4 |IPEX Mini connector | Cu [Au Plating un 3_| GS-NB1183-02A Adhesive SONY-G9000 16*5.0mm 1 2_|PB-NB1183-03FB PCB | FR4 T=0.6mm 1 1 |R-CB-113B [Coaxial Cable _|0.D.1.13 BLACK fl Part Number Name Material Finish Se DESCRIPTION Kes HOEF SIR A A TITLE: 2.4G Embedded Antenna PART NO.: NB2400-128 CUSTOMER PIN:

65-031-254306E APP BY | CHKBY | RF BY [ DES BY @O_ _ | Toleranc 4 UNITS: mm XX 4 Sosa SCALE 2__| XXX +

2021/03/19 REVISION AT Xt