Ten grants have been issued under this FCC ID from 12/29/2025 to 01/06/2026 (this is one of twelve releases in 2026 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked instructions, drivers, password defaults, troubleshooting guides, & warrantee terms.
Quick Guide To use your phone safely and effectively, please read the following before using. English To turn on the product, press and hold the power button for a few seconds. To restart your phone, press and hold the Power Button and Volume Up Button at the same time until the boot animation is displayed to reboot the phone. How to Transfer Old Mobile Content to a New Mobile If your old phone is OPPO/OnePlus/realme phone, please open the Clone Phone and follow the prompts. If your old phone is other Android devices, please open the Clone Phone on your new phone and follow the prompts. If your old phone is iPhone, please scan the QR code on the right to download Clone Phone and follow the prompts. iPhone Regulatory Steps to check rule information: Go to Settings - About device - Regulatory Radio Waves Specifications This device is capable of operation in following frequency ranges and maximum transmission power(radiated and/or conducted) limits, the availability of which may vary depending on different network, country or region. GSM 850/900MHz: 33.5dBm; 1800/1900MHz: 30.5dBm;
WiFi 2.4 GHz: 19.8dBm 5G WiFi: 5150 to 5250MHz: 17.8dBm; 5250 to 5350MHz: 18.2dBm; 5470 to 5725MHz: 19.8dBm 5725 to 5850MHz: 20.8dBm Specification Main screen parameter 17.15cm(6.75'') Battery
(Rechargeable Lithium-ion Battery) DC3.88V 5950mAh/23.09Wh(Min) DC3.88V 6100mAh/23.67Wh(Typ) Note: The SAR values above are the highest values reported for this device. To view the user guide, scan the QR code. Espaol Para usar su telfono con seguridad y efectivamente, lea lo siguiente antes de usarlo. Para encender el producto, mantenga presionado el botn de encendido durante unos segundos. Para reiniciar su telfono, mantenga presionado el botn de encendido y el botn para subir el volumen al mismo tiempo hasta que se muestre la animacin de inicio para reiniciar el telfono. Cmo transferir contenido de un celular antiguo a un celular nuevo Si su telfono anterior es un telfono OPPO/OnePlus/realme, abra "Clonar telfono" y siga las instrucciones. Si su telfono anterior es otro dispositivo Android, abra "Clonar telfono" en su nuevo telfono y siga las instrucciones. Si su telfono anterior es iPhone, escanee el cdigo QR a la derecha para descargar "Clonar telfono" y siga las instrucciones. iPhone Regulatorio Pasos para buscar regulatorio: vaya a Ajustes - Acerca del dispositivo - Regulatorio Especificaciones de las ondas de radio Este dispositivo es capaz de funcionar en los siguientes rangos de frecuencia y lmites de potencia mxima de transmisin (irradiada y/o conducida), cuya disponibilidad puede variar dependiendo de la red, el pas o la regin. GSM 850/900MHz: 33.5dBm; 1800/1900MHz: 30.5dBm;
WiFi 2.4 GHz: 19.8dBm 5G WiFi: 5150 to 5250MHz: 17.8dBm; 5250 to 5350MHz: 18.2dBm; 5470 to 5725MHz: 19.8dBm 5725 to 5850MHz: 20.8dBm Especificaciones tcnicas Caractersticas Elctricas Entrada 100-130Vca ~ 50/60Hz, 0.35A;
200-240Vca ~ 50/60Hz, 0.5A;
Salida 5Vcc 2A;
5Vcc 3A;
Especificacin Elctrica del 3.88Vcc Radio FM Soportado CPH2891 This manual is published by OPPO. OPPO may correct any misprints, errors, and inaccuracies in the manual or improve its apps or devices at any time it deems necessary without any notice. Such changes will be applied in the later versions of this manual. All images in this manual are for reference only and may differ from the actual device and UI. Copyright Guangdong OPPO Mobile Telecommunications Corp., Ltd. 2025. All rights reserved. NOTA:
1. Los valores de SAR anteriores son los mayores registrados para este dispositivo. 2. Este equipo sintoniza Radio FM, solo busca la opcin en el men y conecta tus audfonos como antenna. 3. Radiodifusin Celular Radiodifusin Celular habilitado y activado. Seleccione Men - Seguridad y emergencia - Alertas de emergencia inalambricas.
61280400XXXX V1.0
various
Users Manual
pdf
2.33 MiB
December 31 2025
/
June 30 2026
frequency
equipment class
purpose
1
2026-01-06
2402 ~ 2480
DSS - Part 15 Spread Spectrum Transmitter
Class II permissive change or modification of presently authorized equipment
2
2572.5 ~ 2617.5
PCE - PCS Licensed Transmitter held to ear
3
5745 ~ 5825
NII - Unlicensed National Information Infrastructure TX
4
2412 ~ 2462
DTS - Digital Transmission System
5
JBP - Part 15 Class B Computing Device Peripheral
6
2025-12-29
2402 ~ 2480
DSS - Part 15 Spread Spectrum Transmitter
Change in identification of presently authorized equipment. Original FCC ID: R9C-OP25249 Grant Date: 11/24/2025
7
JBP - Part 15 Class B Computing Device Peripheral
8
2572.5 ~ 2617.5
PCE - PCS Licensed Transmitter held to ear
9
5745 ~ 5825
NII - Unlicensed National Information Infrastructure TX
10
2412 ~ 2462
DTS - Digital Transmission System
Application Forms
app
s
Applicant Information
various
Effective
2026-01-06
various
2025-12-29
various
Applicant's complete, legal business name
Guangdong OPPO Mobile Telecommunications Corp., Ltd.
various
FCC Registration Number (FRN)
0022216790
various
Physical Address
NO.18 Haibin Road, Wusha Village, Chang'an Town
various
Dongguan City, Guangdong, N/A 523860
various
China
app
s
TCB Information
various
TCB Application Email Address
d******@kiwa.com
various
TCB Scope
A4: UNII devices & low power transmitters using spread spectrum techniques
various
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
various
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app
s
FCC ID
various
Grantee Code
R9C
various
Equipment Product Code
OP25300
app
s
Person at the applicant's address to receive grant or for contact
various
Name
X******** B******
various
Title
Manager
various
Telephone Number
(86) ********
various
Fax Number
(86) ********
various
E-mail
x******@oppo.com
app
s
Technical Contact
various
Firm Name
Shenzhen BALUN Technology Co., Ltd
various
Name
X******** W****
various
x**** w****
various
Physical Address
Block B, FL 1, Baisha Science and Technology Park
various
China
various
Telephone Number
86-75********
various
Fax Number
86-75********
various
E-mail
c******@baluntek.com
app
s
Non Technical Contact
various
Firm Name
Innopeak Technology, Inc.
various
Name
R**** W******
various
Physical Address
2479 E Bayshore Rd #120, Palo Alto
various
94303
various
United States
various
E-mail
r******@oppo.com
app
s
Confidentiality (long or short term)
various
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:
Yes
various
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:
Yes
various
If so, specify the short-term confidentiality release date (MM/DD/YYYY format)
06/30/2026
various
06/27/2026
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app
s
Cognitive Radio & Software Defined Radio, Class, etc
various
Is this application for software defined/cognitive radio authorization?
No
various
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
various
PCE - PCS Licensed Transmitter held to ear
various
NII - Unlicensed National Information Infrastructure TX
various
DTS - Digital Transmission System
various
JBP - Part 15 Class B Computing Device Peripheral
various
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)
Mobile Phone
various
Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?
No
various
Modular Equipment Type
Does not apply
various
Purpose / Application is for
Class II permissive change or modification of presently authorized equipment
various
Change in identification of presently authorized equipment. Original FCC ID: R9C-OP25249 Grant Date: 11/24/2025
various
Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization?
Yes
various
Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization?
No
various
Grant Comments
Class II Permissive Change : The information on this change is as follows:
1. Different colors (Different back cover colors do not affect the fire rating)
2. Different model names
3. Added receiver suppliers
4. Removed the mic shielding cover of the sub-board
5. Changed the appearance of the motherboard shielding cover
Output power listed is conducted. SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 15 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR values for head, body-worn accessory, product specific (hotspot) and simultaneous transmission use conditions are 0.20 W/kg, <0.10 W/kg, <0.10 W/kg and 1.17 W/kg, respectively.
various
Class II Permissive Change : The information on this change is as follows:
1. Different colors (Different back cover colors do not affect the fire rating)
2. Different model names
3. Added receiver suppliers
4. Removed the mic shielding cover of the sub-board
5. Changed the appearance of the motherboard shielding cover
Power Output is ERP for part 22, 90 and 27(Below 1GHz) and EIRP for Part 24 and 27(Above 1GHz). SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR values for head, body-worn accessory, product specific (hotspot), simultaneous transmission and extremity use conditions are 1.06 W/kg, 0.58 W/kg, 1.11 W/kg, 1.34 W/kg and 2.19 W/kg, respectively.
The device supports GSM Band 2/5, WCDMA Band 2/4/5, and FDD LTE Band 2/4/5/7/13/18/19/26/66, TDD LTE Band 38/41.
Channel Bandwidth (1.4/3/5/10/15/20 MHz) for LTE B2, B4, B66,
Channel Bandwidth (1.4/3/5/10 MHz) for LTE B5, Band 26(Part 90)
Channel Bandwidth (5/10/15/20 MHz) for LTE B7, B38, B41,
Channel Bandwidth (5/10 MHz) for LTE B13,
Channel Bandwidth (5 MHz) for LTE B18,
Channel Bandwidth (5/10/15 MHz) for LTE B19,
Channel Bandwidth (1.4/3/5/10/15 MHz) for LTE B26(Part 22).
This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.
various
Class II Permissive Change : The information on this change is as follows:
1. Different colors (Different back cover colors do not affect the fire rating)
2. Different model names
3. Added receiver suppliers
4. Removed the mic shielding cover of the sub-board
5. Changed the appearance of the motherboard shielding cover
Output power listed is conducted. SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 0 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR values for head, body-worn accessory, product specific (hotspot), simultaneous transmission and extremity use conditions are 1.15 W/kg, 0.20 W/kg, 0.32 W/kg, 1.34 W/kg and 0.33 W/kg, respectively.
This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes.
various
Class II Permissive Change : The information on this change is as follows:
1. Different colors (Different back cover colors do not affect the fire rating)
2. Different model names
3. Added receiver suppliers
4. Removed the mic shielding cover of the sub-board
5. Changed the appearance of the motherboard shielding cover
Output power listed is conducted. SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 15 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR values for head, body-worn accessory, product specific (hotspot), and simultaneous transmission use conditions are 0.32 W/kg, 0.10 W/kg, 0.20 W/kg and 1.26 W/kg, respectively.
This device has 20/40 MHz bandwidth modes.
various
Class II Permissive Change : The information on this change is as follows:
1. Different colors (Different back cover colors do not affect the fire rating)
2. Different model names
3. Added receiver suppliers
4. Removed the mic shielding cover of the sub-board
5. Changed the appearance of the motherboard shielding cover
various
Output power listed is conducted. SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 15 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR values for head, body-worn accessory, product specific (hotspot) and simultaneous transmission use conditions are 0.20 W/kg, <0.10 W/kg, <0.10 W/kg and 1.17 W/kg, respectively.
various
Power Output is ERP for part 22, 90 and 27(Below 1GHz) and EIRP for Part 24 and 27(Above 1GHz). SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR values for head, body-worn accessory, product specific (hotspot), simultaneous transmission and extremity use conditions are 1.06 W/kg, 0.58 W/kg, 1.11 W/kg, 1.34 W/kg and 2.19 W/kg, respectively.
The device supports GSM Band 2/5, WCDMA Band 2/4/5, and FDD LTE Band 2/4/5/7/13/18/19/26/66, TDD LTE Band 38/41.
Channel Bandwidth (1.4/3/5/10/15/20 MHz) for LTE B2, B4, B66,
Channel Bandwidth (1.4/3/5/10 MHz) for LTE B5, Band 26(Part 90)
Channel Bandwidth (5/10/15/20 MHz) for LTE B7, B38, B41,
Channel Bandwidth (5/10 MHz) for LTE B13,
Channel Bandwidth (5 MHz) for LTE B18,
Channel Bandwidth (5/10/15 MHz) for LTE B19,
Channel Bandwidth (1.4/3/5/10/15 MHz) for LTE B26(Part 22).
This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.
various
Output power listed is conducted. SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 0 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR values for head, body-worn accessory, product specific (hotspot), simultaneous transmission and extremity use conditions are 1.15 W/kg, 0.20 W/kg, 0.32 W/kg, 1.34 W/kg and 0.33 W/kg, respectively.
This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes.
various
Output power listed is conducted. SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 15 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR values for head, body-worn accessory, product specific (hotspot), and simultaneous transmission use conditions are 0.32 W/kg, 0.10 W/kg, 0.20 W/kg and 1.26 W/kg, respectively.
This device has 20/40 MHz bandwidth modes.
various
Is there an equipment authorization waiver associated with this application?
No
various
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC
