1. Know the product Mobile Phone Clamp Mirror Adjustment Screw Shooting Button
Fill Light Button Power Button
{ON/OFF)
@ Indicator Light 4} OFF: Push up to tum off the power
| -t_@ 4 ON: Push down te turn on the power D USB Port Fill Light >
2. Specifications Specifications Product Pocket Stabilizer Model No. ES-01 140*42*52mm/ . Folded Dimension 5.511.65*2.04 inches| Working Hours > 2 hours Weight Approx.160g/0.362 Ibs| Charging Time 4.5 hours Battery Capacity 21000mAn Static Power 60uA Charging Parameter 5V/0.5A drag Auamentation/ 9 330 WorkingTemperature| -20rc~60"c =| Reowraly 7M! gt Indicator Light Indicator Light 4 - Charging
@ Red - The Indicator light Is Red during the battery charging. Once Its fully charged, the Indicator light will be off. Indicator Light 2 - Low Power
@ Blue - When the battery voltage is lower than 3V or lock-rotor Light Status over 5 seconds, the indicator light will flash 3 times per second. Indicator Light 3- tooth
@ Blue - When the bluetooth of the product Is connected, the Indicator light Is blue, When the bluetooth of the proudct Is not connected or falled te connect, the Indicator light will be off. 3. Operation Operation:
@ Attaching the Mobile Phone: Enlarge the Mobile Phone Clamp to fix the mobile phone on it, and adjust mobile phone to the balance position.
@ Power ON/OFF: Pull down the power button to turn on the product, pull up the power button to turn off the product.
@ Horizontal or Vertical Shooting:
After turning on, it will automatically rotate the mobile phone to the balance position, and it will be defaulted to horizontal shooting mode. If switching shooting mode is needed during use, turn the mobile phone to the vertical screen or landscape screen and keep the position for 3 seconds to finish the switching.
@ Bluetooth Connection: Turn on the bluetooth of both stabilizer and mobile phone, and search the bluetooth name "SIRUI-ES-01- #1234" of the stabilizer on your mobile phone to connect.
@ Fill Light: Prass the Fill Light button to adjust the light level.
@ Charging: Charge the stabilizer with the standard cable connecting to the USB port. The stabilizer will be fully charged in about 1.5 hours. Power Shut Down When Rotor Locked Overtime
@ When the rotor is stuck over 5 seconds, the indicator light 2 will start to flash (3 times per second) as a reminder When the rotor Is not locked, the indicator light will stop to flash.
@ When the rotor is stuck over 10 seconds, the product will turn off the power automatically for self-protection, and the Fill Light will flash 6 times per second as a reminder. When the rotor of the product is stuck, manually rotate the Mobile Phone Clamp to switch to other modes or shut down and restart to restore power and return to normal work. Attention:
@ When the product is no-loading, it's normal that the product shakes after turning on.
@ Mobile Phone must be firmly fixed on the Clamp before turning on the stabilizer. Turn off the power before removing the mobile phone from the stabilizer. Strictly prohibit to turn on the stabilizer without loading.
@ Turn off the stabilizer when not in use. 4. Use of Adjustment Screw Tae aD r Moblle Phone Auxiliary Lens
{ Screw-in Adjustment Screw Notes: When the stabilizer lose the center of gravity due to the mobile phone auxiliary accessories (Ike the auxillary lens as shown above), It can be properly adjusted with the Adjustment Screw. (As shown above, when A>B, the center of gravity for the photography equipment can be adjusted.) WARRANTY CARD INFORMATION oe Dear SIRUI Customer:
Thank you for your purchase of S|RUI Professional Products!
SIRUI warrants that your purchase is free from defects in materials and workmanship under normal use during the Limited Warranty Perlod. The Warranty begins on the original date of purchase on your sales receipt and is not transferrable. If service is required, a copy of the sales receipt must be included with an explanation of the problem. Product Warranty Length Single Handheld Stabilizer 1year Model: Date:
Store: Serial Number:
Warranty coverage can differ from region to region. Please see the contact information below for product registration, Information and aerviee forthe region the product wes purchased in, SSIRUI 1 Year Limited Warranty ofthe product This warranty shall ba limited to repalr,ad)uat raplacamentat SIRUI or Its authorized dlatrbutors optlon of dafectiva pars free of char cof transportation to the dlstributor/sarvice conter).Reeponalblly Is limited tothe actual costo tha Item. Call or Emall with questions and service before sanding any product tothe centar In your region. Belowis 2 Ilstng of contaet Information for Product Registration Service Inqull responsible for expenees or inconveniences,or consequential dam expresuod or implied warrantios, Warranty Address and Contact Information:
{Please contact the seller or the local distributor where the product was purchased for warranty Issues or queationa and before any product ls sent.) 4.Guangdong SIRUI Optical Go., Ltd. The Third Industral District, WuguishanTown, ZhongshanGlty, Guangdong, 1d Questions.SIRUI willnotbe:
38 fo equipment, orby breach of any Tel:0086-780-88897373 Fax:0088-760-88207062 Http:tiwww.siruicom E-mail: info@sirui-phota.com Service Hotline: 0086-400 830 2299, 2.SIRUIUSA, LLG Commerce Court Verona, NJ 07044 i.com Toll Free 866-373-0829 _ E-
info@slrul.com A PLEASE SEE:
on USA Warranty Terma and Limitations:
mwarranty. him!
products: www.sirul.com/product-reglstration.htm!
3.Focus Nordic AB For technical support, service or repairs, please contact:
Sweden: info@focusnal www.focusnordic, wew.focusnordic.no wew.focusnordic.dk www focusnordic.f1 www.focusnordic.Is wew.focusnordic.iv www focusnordic.ce www focusnordic. www.focuanordic.pl Info@focusnordic.fl Infogfocusnordie.is h Info@focusnordic.pl 4, SIRUI Europe GmbH (European Service Center) Ada: Fredericlast.2.14059 Berlin. Germany Phone: +49 221949964-50 E-mall: Info@sirul.de
{Please contact the seller or your locel distributor for warranty Issues.) 5. TSE Imaging BY Add: Argonweg 135,1362AD Almere,The Netherlands Telephone: +31 (0)36 8450348 E- rvice@tee-Imaging.nl
{Exclusive Distributor for Netherlands, Belglum, Luxemburg) www. eC. OeAe Zao HS Be, es SAA AB, ASS EA BF GES 10,18 Tel: 02752-3904 Fax: 02-74-9803 www.slrul.co.kr loweprokr@gmall.com Specifications are subject to change without notice. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the that interference will not occur in a particular instal lation. or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to instructions, may cause harmful interference to radio communications. However, there is no guarantee correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. If this equipment does cause harmful interference to radio