FCC ID: 2AWW3-SW100 Multi-function reader (NFC)

SW100 is a reader integrating a qr code scanning, magnetic stripe card technology, contact and contactless smart card technology and password keyboard, mainly to meet the current card system in a qr code scanning, magnetic stripe card, contact, contactless IC card needs. The current interface mode is USB communication, the power supply USES USB port to get electricity, and USB is equipped with no drive technology. It has 4 SAM sockets. We support the literacy of social security CARDS, bank CARDS, medical CARDS, transportation CARDS, IC CARDS, electronic CARDS and other CARDS. SW100 series multifunctional reader is a necessary front-end processing device for IC card system integration, which greatly improves the security of the system and the convenience of application. The following part is the test operation manual, which is divided into four parts: contact function test, non-connection function test, magnetic stripe function test and scan code function test. Test tool usage:

1. Click open port; 2. Select the button of the corresponding function to test;

FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Reference e No.: WTX20 0X04022562 2W-1 EXHIBI T 1 - PRO ODUCT L LABELIN NG Proposed FCC ID La abel Forma at Sovinna Model No FCC ID:

o.: SW100 2AWW3-S SW100 Specification it is visible durable to r expected life Proposed ns: The label or easily acc emain fully l etime. Label Loca ation on EU UT shall be secu cessible to th legible and in urely affixed t he user, and ntact on the to a permane shall not be device in all ently attached readily detac l normal cond d part of the d chable. The l ditions of use device, in a lo label shall be e throughout ocation where e e sufficiently y t the devices s FCC ID Label Lo cation Waltek Tes http://www sting Group w.semtest.co

(Shenzhen) m.cn Co., Ltd. P Page 1 of 16 6

Guangdong Sovinna information technology co.LTD Zhujiang Plaza Block Al4B, Longgang, Shenzhen, Guangdong, China Date: 2020-07-30 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AWW3-SW100 Confidentiality Request To whom it may concern, Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of the information accompanying this application as outlined below:

Block Diagram L] Tune-Up Information Operational Description L] Security Information Schematics L] Software Defined Radio (SDR) L] Parts List Information The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Guangdong Sovinna information technology co.LTD

(Zhiwei Liang)

(Business manager)

Guangdong Sovinna information technology co.LTD Zhujiang Plaza Block A14B, Longgang, Shenzhen, Guangdong, China

(FCC ID : 2AWW3-SW100) POWER OF ATTORNEY DATE: 2020-07-30 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Guangdong Sovinna information technology co.LTD are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Guangdong Sovinna information technology co.LTD

(Zhiwei Liang)

(Business manager)

Guangdong Sovinna information technology co.LTD Suppliers Declaration Of Conformity for the FCC SDoC Procedure The following Equipment adapt FCC SDoC Procedure according to FCC part 2.906 :

Product Name: Multi-function reader Brand Nam: Sovinna Model Number: SW100 Report Number: WTX20X04022562W-2 Its herewith confirmed to comply with the requirements of FCC Part 15 Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. It is understood that each unit marketed is identical to the device as tested, and any changes to the device that could adversely affect the emission characteristics will require retest. The following importer / responsible party in United States:

Not Available at Certification Stage Company Name: Guangdong Sovinna information technology co.LTD Company Address: Zhujiang Plaza Block A14B, Longgang, Shenzhen, Guangdong, China Telephone: 4000755205 Fax: 4000755205 Person is responsible for marking this declaration:

Zhiwei Liang Business manager Name (Full name ) Position / Title ZDhiwei lia | 2020-07-30 Legal Signature Date