ZA4AVWV Folding quadcopter DRONE User Manual Accreditation standard: GB/T26701-2011 The materials, specifications, parts and packaging mentioned in this manual are for reference purposes only. We are not responsible for any changes made to this printed material, nor are we able to inform customers of any updates or changes. Please refer to the SYMA Toys website for the latest information. Assembling the product Folding the quadcopter 2. Fold the arms in the direction of the arrow until the quadcopter 1. Unfold the arms in the direction of the arrow is fully folded. Detaching the propellers Re-installing the propellers
; + e+ +
ey 4 ei 4 or a on Oo, ao Remove the propeller covers and Insert the propellers onto the body of screws in the direction of the arrow, the quadcopter in the direction of the and then detach the propellers. arrow, and then tighten the screws and attach the propeller covers. Note: The propellers are labelled A/B. Ensure that each propeller is inserted in the corresponding position on the arms, and then tighten the screw.and then tighten the screws and attach the propeller covers. Installing the propeller protectors 4 pF = Insert the protective frame into oT the fuselage in the direction of the arrow, and fasten the so lS screws. Attaching the phone holder Insert the phone = (1) holder ip Oe
~) @ Press the spring to i adjust the size of f the phone holder. and then detach the propellers. into the opening on the remote control. Stunt functions Press the spin button Ns
- Rotate right
=) Jan ig
(J Rotate left A Press the spin button on the top-left of the remote control while holding the right joystick to the left or right. The quadcopter will spin to the left or right accordingly. Va \ .
[ y _) Press the spin Ascend Rotate right = Z 5 Rotate left vy sw Press the spin button on the top-left of the remote control and move the right joystick to the top or bottom. The quadcopter will spin in circles and ascend for approximately 60-90cm. Trimming a Trimming forwards and backwards
Trimming left and right If the aircraft drifts forwards or backwards when it is hovering, hold the left joystick down and push the right joystick down/up until the aircraft stops drifting. If the aircraft drifts to the left or right when it is hovering, hold the left joystick down and push the right joystick right/left until the aircraft stops drifting.
-8-
Rectification Procedures Problem Reason Solution 1. The drone has entered into The drone low-voltage protection. 1. Charge up the drone. has no 2. When the power of the remote 2. Change the batteries of response control is weak,the power light the remote control. indicator will blink. 1. The power of the remote control The flight - 1. Change the batteries. is weak. response of A , 5 2. Change to a place where there i 2. There is an interference with : :
the drone is is no interference with the same the same frequency as that of not sensitive the remote control. frequency. The drone is flying towards The drone is not calibrated Re-adjust the calibration until its side in one level to the ground the drone is level to the ground. direction during 9 . For further details, hovering In the headless state, itis biased | Many collisions may cause Re-define the front direction. towards the front | head drift. For further details, direction Fixed high 1.The drone is not calibrated 1.Re-adjust the calibration until instability / u level to the ground. the drone is level to the ground. ae Gown P 2.Unstable air pressure under For further details, fioweriant the severe weather condition. 2. Avoid to fly under the severe 3. Violent collision resulting in weather condition. data disorder of gyroscope. 3. Make level adjustment again,
-| 2?-
Important safety information Thank you for purchasing this SYMA product. To ensure that you operate the aircraft correctly, please read these instructions carefully before first use and store them in a safe place for future reference. Safety information
* Keep the smaller-sized accessories out of the reach of children.
* This aircraft can move very quickly. When flying for the first time, push left joystick up slowly to prevent the aircraft from ascending too rapidly and causing damage or collisions.
* When the flight has ended, switch off the remote control before switching off the power on the aircraft.
* Do not store the battery in a hot environment (e.g.near open flames or a heating device).
* When the quadcopter is airborne, it should be kept at least 2-3m away from the pilot and other people to avoid the risk of a collision during landing.
* Children must be supervised by an adult when operating the aircraft. The aircraft should always remain within the line of sight of the pilot (or instructor).
* Do not recharge non-rechargeable batteries. When installing or changing the batteries, ensure that they are connected in the correct polarity. Do not mix old and new batteries or different types of batteries.
* Do not short circuit the battery terminals
* If you do not plan to use the quadcopter for at least 10 days, discharge the battery to 40%-50%/(i.e. if the battery is fully charged, drive the quadcopter for half of the total driving time). This helps to prolong the lifespan of the battery.
* Maintain a safe distance from the spinning propellers to avoid the risk of injury.
* In order to prevent interference with air traffic control systems, it is forbidden to use remote controls within a5000m radius of an airport runway (calculated from the centre of the runway). Always comply with remote control restriction orders issued by national authorities.
* You must only use the recommended transformer for this model. The transformer is not part of the model. Disconnect the model from the transformer or charger before cleaning with cleaning fluid. Regularly inspect the transformers wires, plug socket, outer casing and other accessories to ensure that they are not damaged. If there are any signs of damage, discontinue use immediately until the fault has been repaired.
* After use, ensure that the quadcopter and remote control are switched off and remove the batteries in the remote control.
* The packaging and this manual contain important information and should be kept in a safe place for future reference.
* Do not look directly at the laser beam.
* a reminder that the toy must be used with caution since skill is required in order to control the flight and avoid collisions with the user, objects or third parties.
* precautions to be observed such as Do not touch the rotating rotor, avoid loose clothing or hair that could be caught in the rotor,do not fly near the face
* advice to adult supervis ors to teach children how to safely fly and control the toy.
* conditions to be observed when using the toy Repair and maintenance
* Clean the product regularly with a clean, soft cloth.
* Avoid exposing the product to direct sunlight or heat.
* Do not submerge the product in water, as this may damage the electrical components.
* Regularly inspect the propellers, motor and battery. If there are any signs of damage, discontinue use immediately until the fault has been repaired.
-1-
Charging the aircraft battery Push the battery cover back, then flip it up to fe Ne remove the battery Charging the aircraft battery Red indicator is constant:
battery is charging. Red indicator is off:
battery is fully charged.
(These tng| Pg 0 Battery USB charging cable 5 V/1 A adapter
* Charge the quadcopter with the USB charging cable that came with the product.
* Using adapters with a lower rated current will result in a longer charging time. Inserting the battery ay Insert the battery and close the battery compartment cover. saan
* Ensure that the battery holder clicks into place.
* The toy is only to be connected to Class II equipment bearing the symbol [o|
* Do not short circuit or compress the battery, as this may cause an explosion.
* Do not disassembling the battery or store it in a hot environment.
* If you do not plan to use the aircraft for at least 10 days, discharge the battery to 40%-50%. This helps to prolong the lifespan of the battery.
* Rechargeable batteries should be removed from the aircraft before charging charged.
* Rechargeable batteries should only be charged under the supervision of adults.and keep away from flammable materials.
* Exhausted batteries should be removed from the aircraft.
* Caution: Risk of explosion if battery is replaced with incorrect ones, please install the batteries according to the instructions.
-5-
Stunt functions Undervoltage Undervoltage protection A flashing red indicator light on the base of the aircraft indicates that the battery level is low. When this occurs, bring the aircraft back to land. Overcurrent protection If the aircraft's blades collide with another object or become stuck, the aircrafts circuit will engage the overcurrent protection mechanism. Place the aircraft on a level surface and move the left and right joysticks to the lower right corner for approximately 3 seconds. The indicator will flash rapidly and then stay constant to indicate that the calibration process is complete. Briefly press the right joystick to switch between high and low speed mode. 1. Low speed mode is enabled by default when the aircraft is switched on. 2. The remote control beeps twice when high speed mode is enabled and once when low speed mode is enabled. Once you have mastered the basic controls, you can try performing some flip manouevres. Start by flying the quadcopter to an altitude of at least 3 m. Then hold down the button on the top-right corner of the remote control (flip button) and push the right joystick all the way up/down/left/right to flip the aircraft forward/backwards/left/right. ry 1. When the aircraft is in standby, press the y take-off button to make the aircraft take off
) automatically and hover at a height of 1.5 m. 2. When the quadcopter is in the air, press the one-touch take-off/landing button to make the aircraft land automatically. One-touch take-off/landing Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
eReorient or relocate the receiving antenna. elncrease the separation between the equipment and receiver. eConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. eConsult the dealer or an experienced radio/TV technician for help. This device complies with FCC radiation exposure limits set forth for general population
(uncontrolled exposure).This device must not be collocated or operating in conjunction with any other antenna or transmitter. RF frequency band :2445MHZ-2475MHZ Transmitter power : 3.55dBm(Max.) WIFI frequency band: 2412-2472MHz WIFI power: 13.88dBm(Max.) Sold to EU country product name: [Folding quadcopter]
model number: [Z4W]
Brand name :SYMA Contact person: Ivan Tel:+86-0754-86381701 Hereby, [GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD], declares that this [aircraft ] is in compliance with Directive 2014/53/EU.The full test of the EU declaration of conformity is available at the following internet address:
http://www.symatoys.com/down/declaration-of-conformity.html SIMPLIFIED EU DECLARATION OF CONFORMITY Manufacturer:
Guangdong SYMA Model Aircraft Industrial Co., Ltd. Address: 2 West Xingye Rd, Laimei Industrial Area, Chenghai, Shantou, China Postal Code: 515800 Sales department: +86 0754 86980668 After-sales service: +86 0754 86395095 Fax: +86 0754 86395098 C Website: www.symatoys.com Email: syma@symatoys.com The company has the right of final interpretation of this user manual. About this product Aircraft components Specifications
* Aircraft Weight Aircraft Approx. 67 g Specifications 311x293x53.6 mm Flight range Approx.30 m Flight Altitude Approx.10 m Flight time Approx.10 mins Motor 26 Battery 3.7 V, 400 mAh Battery Charging time Approx. 60 min
* Remote control Operating frequency 2.4 GHz Operating temperature OCto 40C
* Package contents Aircraft Remote Phone holder USB charging cable Propeller Propeller protector User manual
(A\B) Sam A Sao a Download the SYMA FLY app and watch the video tutorial
@ Propeller protector Battery cover
@ Motor @ Rear indicator
@ Power switch Front indicator
@ Propellers Lens Installing the SYMA FLY app Scan the QR code with your mobile device or download the app from your app QR code for android QR code for apple system iOS system
* Note: For best results, use a device with iOS 8.0/Android 5.0 or later.
-2-
Inserting the remote control batteries 4 Battery cover ;
(++ I
+n +0 4x AA batteries To insert the controller batteries, open the battery cover on the back of the remote control and insert 4x AA alkaline batteries, ensuring that you observe the polarity markings (batteries are not included and must be purchased separately). Remote control components
@ Power switch
@ Left joystick
(press and hold for trimming adjustments and release when finished)
@ Phone holder
@ Right joystick
(short press to toggle between high and low speed mode) 3D flip button One-touch take-off/landing button
@ Spin button Turning the quadcopter on Method one: Method two: Method three:
Press the ascend/
return to the central position. a V shape descend button Push to the top and then Pull the joysticks in
* When installing the batteries, ensure that you match the + and ends of the battery with the + and signs on the controller.
* During the battery installation, it must be ensured that the polarities of the batteries are matched with that of the battery box. No battery uN shall be installed with the opposite polarity.
* Please do not use new and old batteries together.
* Please do not use different types of batteries together.
* Do not use rechargeable batteries.
* Exhausted batteries are to be removed from the Remote control.
* Rechargeable batteries are to be removed from the toy before being charged
* Rechargeable batteries are only to be charged under adult supervision Flight preparation and turning the aircraft on/off Note: 1. If the aircraft is flown out of range from the remote control, the aircraft indicator light will start to flash and the aircraft will land slowly. 2. If the remote control suddenly turns off or runs out of power during flight, the aircraft will automatically land and come to a stop. If the remote control is turned back on during this process, you will be able to control the aircraft again. Pairing the remote control with the aircraft Remote control indicator Switch on the remote control flashes rapidly Indicator flashes rapidly> slowly The indicator will stay constant when pairing is complete. to indicate that the remote control is waiting to pair with the quadcopter.
| After you switch on the remote control, the indicator will flash quickly
-6-
Turning the quadcopter off Method one: Method two: Method three:
Push to the bottom for 2-3 Pull the joysticks in Press the ascend/
seconds a V shape descend button Using the remote control Ue
<x Reverse SZ =a ae Forwards Accessories (available separately)
= Atmospheric pressure positioning When you release the left joystick (throttle) WZ NZ after ascending/descending, the quadcopter will continue to hover at the current height. 1. Define the front When the aircraft is powered on for the first time, the direction of the aircraft nose is straight ahead. 2. Start headless function Headless mode After the linking is completed, press and hold the right joystick
(about 2S), the remote controller will emit a "dididi..." sound, and the indicator light on the aircraft will flash slowly, indicating that it has entered the headless state; press and hold the right joystick again (about 2S). When you hear a long beep, you will exit the headless state. In the headless state, the controller does not need to identify the position of the aircraft's nose, but only needs to control the aircraft according to the direction of the joystick of the remote control. Define the positive direction function correction:
When the aircraft collides with a headless state, if you find that the fixed head direction is deviated, you only need to re-orient the aircraft and move the left and right joysticks of the remote control to the lower left at the same time. When the indicator on the aircraft flashes slowly 3 A long light after a second indicates that the calibration is complete. Real-time transmission function 1.Download and install the app. If you have an Android device, download the SYMA FLY app from the Syma website
(www.symatoys.net), or scan the QR code shown. If you have an iOS device, download the Syma Fly app from the Apple App Store, or scan the QR code shown. Note: The QR code is printed on the packaging and on the back cover of the user manual. Visit the Syma website or your app store to download the latest version of the Syma Fly app. 2.Follow the in-app instructions
-10-
The following section contains a list of optional accessories that are available to purchase. Accessories can be purchased from your local retailer. Please indicate your preferred colour when making your purchase. Arm Propeller Box protectors e ee =
Propeller Propeller MotorA Motor B blades decorations Lights Battery Receiver board i Camera control holder circuit board
-11-