FCC ID: QV7-GC88710-03 R/C CAR

1:28 Instruction manual Stunt car Thank you for purchasing one of our toy products. To ensure that you get the most out of your new purchase, please read these instructions carefully before using the toy for the first time. They contain important information on how to operate the product. Caution Electrical product This product is not suitable for children aged 6 or under. When using electrical products, precautions must be taken to prevent the risk of an electric shock. Ensure adult supervision at all times Warning: Do not attempt to modify or re-assemble this product. Unauthorized changes may void your right to use the product. WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this toy. Charging the batteries 1. Insert the USB plug into an indoor USB power supply, and then connect the battery compartment to the charging cable. 2. A full charge takes 90 minutes. When charging the LED indicator turns into red,when charging is complete ,the LED indicator stays off. 3. Regularly inspect the toy, battery charger, charging cable, connectors and other components for signs of damage. In the event of any damage, discontinue use and send the parts for repair. Calibrating the vehicle ON/OFF ON/OFF Inserting the remote control batteries 1. Observe the polarity markings on the battery compartment to ensure that the batteries are inserted in the correct polarity. 2. Attach the cover to the battery compartment as shown in the diagram below. 3. Insert rechargeable batteries into the battery compartment. 4. Use a screwdriver to secure the battery compartment cover in place. Instructions:

Check that the ON/OFF switch is in the ON position. The vehicle will not respond to the remote control when the switch is in the OFF position. Inserting the battery compartment into the vehicle 2x1.5vAA USB Basic controls Fig. 1 Fig. 2 Fig. 3 1.Push both throttle levers upwards to make the vehicle move forwards. 2.Pull both throttle levers downwards to make the vehicle move backwards. 3.Push the left throttle lever upwards and pull the right throttle lever downwards to make the vehicle spin clockwise. Fig. 4 Fig. 5 Fig. 6 4.Pull the left throttle lever downwards and push the right throttle lever upwards to make the vehicle spin anticlockwise. 5.Push the left throttle lever upwards to flip the wheels and make the vehicle move forwards. 6.Pull the left throttle lever downwards to flip the wheels and make the vehicle move backwards. Using the vehicle 1. Switch on the vehicle using the ON/OFF switch. 2. Use the throttle levers on the remote control to make the vehicle move forwards, backwards, left or right. 3. Switch off the vehicle and remote control after use. Battery safety information 1. The batteries must only be charged under adult supervision. 2. Before charging the batteries, remove the battery compartment from the vehicle chassis. 3. Remove empty batteries from the vehicle and remote control. 4. Ensure that the vehicle is switched off before inserting the batteries. 5. Ensure that the batteries are inserted in the correct polarity (observe the + and markings on the battery compartment). 6. Do not attempt to charge non-rechargeable batteries. 7. Do not short circuit the battery terminals. 8. If you do not plan to use the vehicle for an extended period, remove the batteries from the vehicle and remote control to prevent leakage. 9. Do not throw batteries into open flames, as this may cause them to explode or leak. 10. Different types of batteries or new and used batteries are not to be mixed. 11. Only use batteries from recommended or reputable manufacturers. 12. Regularly inspect the batteries for signs of leakage. 13. Keep this instruction manual in a safe place for future reference. It contains important information on how to use the product safely. 14.The battery charger used with the electric toy shall be regularly examined for damage to the supply cord, plug, enclosure or other parts, and in the event of damage, it shall not be used until the damage has been repaired. Care and maintenance 1. Remove the batteries when you do not plan to use the toy for an extended period. 2. Use a damp cloth to wipe the vehicle clean. 3. Do not expose the toy to high temperatures, moisture or direct sunlight. 4. Do not immerse the toy in water, as this may damage the electrical components. Caution Do not touch the wheels when the vehicle is moving, as this may damage the vehicle. Do not use the vehicle next to roads or other hazards, as this may cause an accident. Do not use the vehicle in puddles, mud or sand. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Hereby, (GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD ) , declares that this (Vehicle) is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full test of the EU declaration of conformity is available at the following internet address:

http://www.symatoys.com/down/declaration-of-conformity.html SIMPLIFIED EU DECLARATION OF CONFORMITY Manufacturer:

Guangdong Syma Model Aircraft Industrial Co., Ltd. Address: No. 2 West Xingye Road Laimei Industrial Area, Chenghai Shantou City,Guangdong, China. Postal Code: 515800 Sales department: +86 0754 86980668 After-sales service: +86 0754 86395095 Fax: +86 0754 86395098 Website: www.symatoys.com Email: syma@symatoys.com The company has the right of final interpretation of this user manual.

GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD NO.2 WEST XINGYE ROAD LAIMEI INDUSTRIAL AREA CHENG HAI, Shantou, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 12-04-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: QV7-GC88710-03

[GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

(Applicant signature)

(Ivan Chen)

GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD NO.2 WEST XINGYE ROAD LAIMEI INDUSTRIAL AREA CHENG HAI, Shantou, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 12-04-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: QV7-GC88710-03

[GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely,

(Applicant signature)

(Ivan Chen)

UNITED STATES DESIGNATED AGENT LETTER Date: 2023-11-28 tO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: GUANGDONG SYMA Company Name: Picus Advisors US LLC MODEL AIRCRAFT INDUSTRIAL CO., LTD. Contact Name: Ivan Chen Contact Name: Ivan Wang Address: No.2 West Xingye Road Address: 839 FM1489 Rd, Brookshire, TE Laimei Industrial Area XAS, 77423, USA Chenghai District Shantou City Guangdong China City/Province/Zip: City/Province/Zip: | Brookshire, TEXAS, 77423 Telephone: 0754-86381898 Telephone: +1(713) 614-8188 Email: syma@symatoys.com Email: ivan.wang@nygtek.com FRN: 0022150262 FRN: 0034336891 Applicable Equipment: FCC ID: QV7-GC88710-03 ATTN: Director of Certification:

We, < GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD. > and

<Picus Advisors US LLC> understand and acknowledge the applicants consent and the designated agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, < GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD. > and

<Picus Advisors US LLC> acknowledge the applicant's acceptance of ifs obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent MOURA ONT Peas Advisers us LbC Name (Printed): Ivan Chen Name (Printed): Tyan We 9 Title: Manager Title: CE O Signature: Lyme WM one 4 lan then ae Signature:

GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD NO.2 WEST XINGYE ROAD LAIMEI INDUSTRIAL AREA CHENG HAI, Shantou, China Agent Authorization Company: GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD Address: NO.2 WEST XINGYE ROAD LAIMEI INDUSTRIAL AREA CHENG HAI, Shantou, China Product Name: R/C CAR Model Number(s): TG1003 Product Description: R/C CAR We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Ivan Chen Date: 2023-12-07 Company: GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD

GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD NO.2 WEST XINGYE ROAD LAIMEI INDUSTRIAL AREA CHENG HAI, Shantou, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: QV7-GC88710-03 Date: 2023-12-04 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Contact person: Ivan Chen