N e n wi
<q
>) LES GYROSCOPE 24G KF PLOR. 4CH 2.4G REMOTE CONTROL QUADCOPTER XBL. INSTRUCTION MANUAL B IMPLEMENT STANDARD: GB/T26701-2011 PREFACE Dear Customers:
Thank you for purchasing our flying model.Please read this instruction manual carefully in order to master the skill more quickly and operate this product more safely.In the mean time, please well keep the original of this instruction manual for future reference. IMPORTANT INSTRUCTION 1.This product is not a toy but a precisive equipment that integrating mechanics and electronics with expertise of aerodynamics and high-frequency transmitting. It requires to be correctly assembled and debugged so as to prevent the accident from being happened.The product owner should operate or control it in safe way. Please noted that we wont take any responsibility for any wrong operation as this may result in severe injury or loss of property and we can not control the operating process during the time when the user assemble or use this product. 2.This product is suitable to be used by people who has operating experience in flying model or age no less than 14 years old. 3.The flying ground we required should be the local field and legal for remote control flying. 4.Once this product is sold , we won't be responsible for any safety responsibility during the time the user operates or uses or controls this product. 5.If there is any problem occurred during the time of using, operating or repairing, please reach our sales agent for details. The sales agent that we authorized will provide you with the technical support and after-sale service. 6.The suitable temperature of the products flight is from minus ten degrees to forty degrees centigrade. SAFTY & CAUTIONS This R/C flying model is a high dangerous commodity.Please make sure that it should be flied far away from the crowd.Please also pay more attention to the phenomenon such as incorrect assembly or damaged model or incorrect connection of electronic control equipment.Please also pay attention to the flying safety when operating and know more about the accident that may be happened due to your own negligence. 1. Keep it far away from the barrier or crowd. 2.Keep it far away from the moisten environment. 3.Use this product correctly and avoid operating by your own. 4. Keep it far away from the high-speed rotating part and heat source. 5. Please conform to the sequence of power ON/OFF.As the picture below shown, incorrect sequence of power ON/OFF may cause this product out of control and affect your own safety or others. Please form a good habit of switching on or switching off this product correctly. CONTENTS Quadcopter USB Charging Cable _/f51\
e iS}
e Transmitter Screwdriver i e Main blades e Instruction manual e Screw 4PCS GET TO KNOW YOUR TRANSMITTER Introduction of transmitter Antenna Indicator High/Low speed switch \ 3D Eversion Left control Right control lever lever (Accelerator) Photo and video (this @ Forward and function for item no. X5C) backward Left Fine -tuning(Mode 1) Mode switch Sideward Fine-tuning (Mode 2) Sideward Fine-tuning (Mode 1) f Left Fine -tuning(Mode 2) Power ON/OFF LCD Displayer Remote control Installing the battery a a Battery Cover 4 X AA(LRO6) 1.5V Batteries Figure 1 Figure 2 1.Use a screwdriver to remove the screw on the back of transmitter,than open the battery cover(Figure 1). 2.Install 4 AA batteries (not included) into the back of transmitter than replace battery cover and reinstall the screw (Figure 2). 1.Install batteries with correct polarity. 2.Do not mix old and new batteries. 3.Do not mix different types of batteries. REMOTE CONTROL KEYPAD AND LCD MANUAL 01.Sideward Fine-tuning :Power-on start in the centering.(Be turn Left/Right Fine
-tuning in Mode2) 02.Forward/Backward fine-tuning:Power-on start in the middle. 03.Turn Left/Right fine-tuning:Power-on start in centering.(Be Sidewoard Fly Fine
-tuning in Mode2) 04.Throttle show:Power-on start in lowest level.(Left and Right throttle shows at one time) 05.Forward shows:Power-on start in the lowest level.(At the center spuare) 06.Backward shows:Power-on start in the lowest level.(At the center spuare) 07.Right sideward fly shows:Power-on start in the lowest level.(At the center spuare) 08.Left sideward fly shows:Power-on start in the lowest level.(At the center spuare) 09.Turn left: Pull left function lever to left, it will be higher, than quad copter turn left faster. 10.Turn right: Pull left function lever to right, it will be higher, than quad copter turn right faster. 11.High/Low speed: Press button A for seconds to switch between high speed mode or low speed mode. H means high speed and L means low speed. 12.Power shows:According to the battery's energy for the controller. 13.Default mode when power-on.When change to MODE 2, please keep pressing button "B" to right than return on the power of transmitter, the MODE on LCD displayer will be changed. Same steps to change to MODE 1 again. 14.Signal shows:Normally to full frame. READY TO FLY YOUR QUADCOPTER Step 1: Press the ON/OFF Step2: Open the battery Step 3: Close the battery power switch up. cover and insert the cover and turn on battery into power the quadcopter. port. Step 4:Push the throttle lever to the highest position, and then pull it back to the lowest position. There will be one clear sound from the transmitter, this shows that the quadcopter has entered into the pre-fly state. TIPS:When syncing your quadcopter keep it in a horizontal position to start to a S stable flight. ULLLLLLLLLLLLLLLLLL'
CAUTIONS:
1.When the indicator of transmitter keep light on but the indicator of quadcopter is blinking slowly, it means signal matching was not successful. Please turn off the power both of transmitter and quadcopter than restart the transmitter and quadcopter. 2.If the quadcopter is till flying to on side dramatically or spinning while hovering, please switch off the power of both the quadcopter and transmitter and then repeat the pre-flying steps. 3.When the indicator of the quadcopter keeps flashing slowly, it means that the quadcopter has entered into the low battery state. This time you need to charge the quadcopter with the USB cable provided. CHANGE BATTERY OF QUADCOPTER
% 1 1.Push the on/off switch of quadcopter 2.Pull out the battery wire from to OFF position than open the battery the power port. 3.Take out the USB charging cable, 4.To charge battery, please insert the and insert the battery power port USB port of provided USB charging to the small end of it (Make sure cable to anyone USB port of computer. the ports connect tight and correct ). The indicator on USB cable will light ON during charging battery, than it will light OFF when battery fully charged. Caution:
When using the computer for charging, please remember to pull out the charging cable before shutting down the computer. Take the battery cover , and close the battery cover on the quadcopter. 5.Reconnect the battery wire to power port than close the battery cover. Charging time: about 90-100 minutes Flying time: about 5.5 minutes!
CAUTIONS WHEN CHARGING 1.When charging, please put this product on a dried or ventilated area and keep it far away from heat source or explosive product. 2.When charging, please remove the batteries from the quadcopter. Then charging process should be supervised by an adult so as not to cause an accident. 3.After flying, please do not charge the battery if the surface temperature is still not cool. Otherwise it may cause a swollen battery or even a fire hazard. 4.Please make sure that you use the original USB charging cable provided.When the battery has been used for a long time, or appears to be swollen, please replace them. 5.A battery when not in use for a long time will lose its charge automatically. Charging or discharging too often may reduce the life of the battery. BATTERY REPAIR & MAINTENANCE 1.Battery should be put in the dried or ventilated place with enviroment temperature about 18-25C. 2.In order to enhance the using life of the battery, please avoid repeat charging or excessive discharging. 3.When the battery needs to be stored for a long time,please charge the battery first. That is to say, charge the battery for about 50-60% of the volume and then well store it. 4.lf you do not use it for more than 1 months, its highly recommended that you need to check the battery voltage every month so as to make sure the voltage no less than 3V. Otherwise please do by following No.(3) mentioned. INSTALL LANDING SKIDS & BLDAE PROTECTING FRAME Figure.1 " Figure.2 1.Install the landing skids to the bottom of quadcopter (Figure 1). 2.Install the blade protecting frame to every corner than lock screws (Figure 2). CONTROLLER MODES & INSTRUCTIONS The transmitter built-in two modes, Mode 1 & Mode 2, in line with different customer's usage pattern. Keep pushing button B to right, than turn on the transmitter power to change Mode 1 or Mode 2. MODE 14 Operating direction Hover up and down Forward and backward Push the throttle up or down, the Push the direction lever up or down, the quadcopter flies upward or downward. quadcopter flies forward or backward. Turn Left and Right Sideward a Pull the throttle left or right, the Pull the direction lever left or right, the quadcopter turns to left or right. quadcopter flies to left side or right side. Fine-tuning operation Forward/Backward fine-tuning Sideward fly fine-tuning Turn left/right fine-tuning When the quadcopter keeps When the quadcopter keeps When the quadcopter keeps flying forward / backward, you _ flying to left / right side, you rotating to left /right, you can can correct it by pressing can correct it by pressing the Correct it by pressing the fine-tuning button down/up. _Fine-tuning button right / left. fine-tuning button right / left. MODE 2 Operating direction Hover up and down Forward and backward Push the throttle up or down, the Push the direction lever up or down, the quadcopter flies upward or downward. quadcopter flies forward or backward. Turn Left and Right Sideward fly Pull the direction lever left or right, the Pull the throttle left or right, the quadcopter turns to left or right. quadcopter flies to left side or right side. Fine-tuning operation Forward/Backward fine-tuning Sideward fly fine-tuning Turn left/vright fine-tuning When the quadcopter keeps When the quadcopter keeps When the quadcopter keeps flying forward / backward, you flying to left/right side, you _ rotating to left /right, you can can correct it by pressing can correct it by pressing the Correct it by pressing the fine-tuning button down / up. _ fine-tuning button right / left. fine-tuning button right / left. INTRODUCTION TO QUADCOPTER FUNCTIONS Low-voltage protection:
When the quadcopter battery is not enough, the rotors will be stopped power supply.As the quadcopter control systemwill protected battery automatically. Over-current protection:
When the quadcopters rotating blade is collided or jammed, the control system will stop supplying power for the rotors automatically, Then please re-match the signal for flying. Restart function:
In case of flight disorder or sideward flight, restore factory default settings by the
@.Press the power switch to turn on the transmitter.
@,Press the power switch to turn on the quadcopter.
@).When the quadcopter indicator quickly flashing to slowly flashing,please push the throttle lever to the highest position,and then pull it back to the lowest position. Then the quadcopter indicator changed from slowly flashing to normal lights up.
@,.Place the quadcopter on a horizontal postion, then push transmitter both left and right lever to lowest right conner for about 2-3 second , indicator on the quadcopter changed from normal lights up to quickly flashing ;After 2-3 second ,the indicator changed to normal lights,it means the quadcopter restarted /reset successfully. 3D EVERSION AND THROWING FLIGHT INSTRUCTIONS When you are familiar with the basic > WA operation, you can do some awesome
& exciting tricks and stunts! First of all, fly the aircraft to a height of more than 3 meters, press the 3D Eversion switch on the rear right side of the transmitter, then push the right rudder(in any direction) to make 360 degree flip. Tips:3D eversion goes better when battery power is enough. Thanks to the 6 axis gyroscope, you can throw the quadcopter and push the throttle right up, it will automatically level out and hover smoothly in the sky, This can also be done when the quadcopter isrolling. INSTALL CAMERA 1. Push the camera into a hold on the battery cover (Figure 1). 2. Open the battery cover with camera (Figure 2). 3. Lock screws to add-on the camera tight (Figure 3). 4. Close the battery cover with camera than insert the 3-pin plug to the hold in side (Figure 4). PHOTOGRAPHY / VIDEO INSTRUCTIONS:
1. Methods: Make sure the 3-pin plug of camera is inserted to the quadcopter.
@ Turn the quadcopter power on, the camera works normally when the RED indicator change form flashing to green and keep light on. If the RED indicator just light on and light off seconds later, it means the SD card is not in the camera. Please insert the SD card, than the indicator light on GREEN. 2.Get to know take photo and video:
@ Turn on the transmitter and pull left lever up and down to connect signal between quodcopter and transmitter. [aaa @H
@ Take Photo : Make sure camera normally work, when push the button C up, camera will take a photo after a te a beep from transmitter and the GREEN indicator on camera will be RED and flash on time. oa
ACH |
@ Take Video : Make sure camera normally work , when = y pull the button C down , camera starts to take video after a beep from transmitter and the GREEN indicator on camera will change to RED than keep flashing. Press the button C slightly again , another beep from transmitter means video stopped and the RED flashing light on camera will be GREEN and keep light on. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur ina particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
eReorient or relocate the receiving antenna. elncrease the separation between the equipment and receiver. eConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. eConsult the dealer or an experienced radio/TV technician for help. This device complies with FCC radiation exposure limits set forth for general population (uncontrolled exposure). This device must not be collocated or operating in conjunction with any other antenna or transmitter. Decoration of Conformity Inserts:
Hereby, GuangDong Syma model aircraft Industrial co.,ltd, declares that this drone is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU A copy of the full DoC is attached TROUBLE SHOOTING Reason Solution 1.Quadcopter battery power not enough.| 1.Charge the quadcopter No rie 2.Transmitter battery power not enough.| 2.Charge or replace them if required. rome eA 3.The band of the transmitter does not | 3.Adjust the band on the transmitter and quadcopter correspond to the decoding of the keep it the same as the quadcopter. quadcopter. If the quadcopter | 1.Insuffcient power with the transmitter. | 1.Replace the battery. is slow to respond) 2 Transmitter of the same frequency is | 2.Use the helicopter out of the range of or difficult to used nearby. other RC quadcopter. manoeuver SPARE PARTS All the sare parts below can bought from local distributor. cess! =a Deed ES X5C-01 X5C-02 X5C-03 X5C-04 Body cover Main blades Protecting frames Landing skids loa X5C-05 X5C-06 X5C-07 Motor holder Lampshades X5C-09 X5C-10 X5C-11 Light boards Receiver board Battery USB charging cable Transmitter BREAKDOWN & DIAGRAM
tN n oa 2 NJPt}stp ry cfrps o 2 2/-/4/2 ao
o ro
D]a4 ing a Bilxsl|ale g8)eo}]Sslis Quantit Camera Code Quantit
s 3B z 5 8 3 a eceiver motor otor holder ampshade:
ight boards eceiver boar Battery a Description pper body ower bod!
otating blad ing blade ing frames attery cove Rotating moto!
Revers Protecti 04 05 07 MAIN PARAMETER Body length: 31.5cm Body width: 31.5cm Body high: 7.5cm Main motor code: 7 Battery: 3.7V 500 mAh Li-poly
-13-