14+
GYRO REMOTE CONTROL SERIES. 6 ABHWes 4-CHANNEL PRESSURE HOVERING HEIGHT-ADJUSTMENT REMOTE CONTROL 6-AXIS FLYCOPTER, I~ USER MANUAL OPERATING STANDARDS: GB/T26701-2011 MAIN FEATURES e Utilises the 4-axis structure, enabling the aircraft to be even more flexible, speedy,and possessing a relatively stronger wind-withstanding capability. Also it can conduct flights in interior as well as exterior environment. e A6-axis gyro direction stabiliser is built-in, ensuring precise positioning in the air. e The structure uses modular designs, making installation simple and repair and maintenance easier. e Capable of 360 3D overturning function and fling-flying function. e Headless function is enabling the aircraft to be summoned back with ease. e Brand new pressure hovering height-adjustment function. The content, specifications or accessory packaging of internal products in this user manual is strictly for reference only. Our company will not be responsible for errors in the printed contents and it will not be able to proactively notify the consumers. For any updates or errors, please abide by the SYMA MODEL AIRCRAFTs website as accurate. Safety guide 1. Please store the smaller-sized aircraft accessories in places that are out of reach of children, in order to avoid the occurrence of accidents. 2. This aircraft is very powerful. For all first-time flight, it shall be observed that the left gear shift joystick must be slowly pushed in order to prevent the aircraft from ascending too quickly and result in unnecessary collision and damages. 3. When the flight is ended, the power supply of the remote control shall be switched off firstly, and then, followed by the switching off of the power supply of the aircraft. 4. Avoid placing the batteries in places with high temperatures and exposure to heat (for example, naked light or electrical equipment installations). 5. Take extra precaution to ensure that the aircraft is at a distance of 2 to 3 metres from the user or other people in order to prevent the aircraft from colliding into the head, face or body, etc. of other people during landing. 6. When young children are operating the aircraft, it shall be ensured that the adults are guiding and making sure that the aircraft control is within the viewing range of the controller (or instructor) such that it makes the control very convenient. 7. Non-rechargeable batteries are prohibited for recharging. When installing or changing the batteries, please take extra care on the polarities of the batteries; ig new and old batteries or different types of batteries are strictly disallowed. 8. When the aircraft is not in use, please switch off the power supplies of both the aircraft and the remote control, and remove the batteries in the remote control. 9. The terminals & power supply cannot be short-circuited. 10.Product operating temperature of 35 .
-1-
Repair and maintenance 1. Always use dry and soft cloth to clean this product. 2. Avoid this product to be exposed to sunlight or heat. 3. Avoid immersing these toys into water, otherwise ,the electronic parts may be damaged. 4. Regularly Check and inspect the plug and other accessories. If any damages are discovered, please immediately stop using it, until it is completely repaired in good working condition. Package description The following items can be found in this product package:
+ Aircraft + WiFi Camera
+Remote Control _ + Mobile Phone Retaining Clip
+ Main Blade + Screws (24 nos.)
+ Instruction Manual + Foot Stand
* Screwdriver + Iron shaft =
*Protection Gear + Blade lockstitch :
* Charge box + Card Reader < HH Ill
* Battery + Memory card Understanding your remote control Remote controls button function description:
High-Low Speed Switch/ Antenna Headless Function Toggle Button Left Joystick
(Ascending/
Descending/Left/
Right Turn) Light Indicator Overturning Button Right joystick
(Forward/Backward/
Left/Right Side Flying) Front and Back Fine-Tuning Button Left/Right Side Flying Fine-Tuning Button/Mode Toggle Button Left/Right Turn Fine-Tuning Button Power Supply Switch Battery installation for remote control:
Battery cover Ji 4x AA Batteries 1. Battery Installation Method: Open up the battery cover at the back of the remote control. Correctly place 4 x AA alkaline batteries in the battery box in strict adherence to the polarity instructions (the batteries are optional). 1. During the battery installation, it must be ensured that the polarities of the batteries are matched with that of the battery box. No battery shall be installed A with the opposite polarity. 2. Please do not use new and old batteries together. 3. Please do not use different types of batteries together. Remote control button and Icd display functions description 1. Fine-tuning of left and right side flying: After switching on the remote control, it is displayed at the middle point. 2. Fine-tuning of forward and back: After switching on the remote control, it is displayed at the middle point. 3. Fine-tuning of left and right turning: After switching on the remote control, it is displayed at the middle point. 4. Accelerator Display: After frequency-matching, it is displayed at the middle point. 5, Forward Display: When the right joystick is pushed forward, it will be gradually ascended; the forward speed of the aircraft will be gradually increased. 6. Backward Display: When the right joystick is pushed backward, it will be gradually ascended; the backward speed of the aircraft will be gradually increased. 7. Left Side Flying Display: When the right joystick is pushed to the left, it will be gradually ascended; the left side flying speed of the aircraft will be gradually increased. 8. Right Side Flying Display: When the right joystick is pushed to the right, it will be gradually ascended; the right side flying speed of the aircraft will be gradually increased. 9. Left Turning Display: When the left joystick is pushed to the left, it will be gradually ascended; the left turning speed of the aircraft will be gradually increased. 10. Right Turning Display: When the left joystick is pushed to the right, it will be gradually ascended; the right turning speed of the aircraft will be gradually increased. 11. Fast-Slow Gear Display: Press against Button A can enable the aircraft to execute the toggle of fast-slow gear. The fast gear is H, while the slow gear is L. 12. Power Supply Display: Display the current power capacity of the remote control. 13. Mode Display: The default is MODE1 upon starting up. Push the Button B to the right and switch on the power supply switch at the same time can toggle to MODE2. 14. Signal Display: Display the strong and weak signals.
-4-
Installation steps of quadcopters safety guard we Figure 1 Figure 2 Figure 3 1. Pullout decorating 2. Insert guard circle _ 3. Twist two screws of parts as shown in into the fuselage every parts as figure (1). interface as shown shown in figure (3). in figure (2). Installation steps of quadcopters stands Figure 1 Figure 2 1.Insert stands into the 2.Twist the wide screws quadcopter body as to locking the stands as figure(1). figure(2). elmer photo-taking component installation Mobile phone retaining clip installation:
1. Align the mobile phone retaining clip with the antenna of the remote control and insert it in. 2. Use strength to press against the spring section of the retaining clip to adjust the size. 3. Hold tight to the mobile phone retaining clip and pull upwards with sufficient force Al to remove the mobile phone retaining clip. ice eer photo-taking component installation 1. Download the installation software:
For Android mobile phones, please kindly (visit www.symatoys.net) or scan the QR code to download the SYMA FPV installation software. For Apple mobile phones, please kindly proceed to APP STORE to download the SYMA FPV installation software or scan the QR code to download the SYMA FPV installation software. Connection description:
Connect model power supply. The FPV light indicator is green and will become red blinking light after approximately 20 seconds, awaiting the connection for mobile phone. At this moment, click on Settings option in mobile phone and activate WIFI. In the WIFIs search column, look for FPV WIFI **** connection, and click on connection until the message has been connected is shown, which indictes that the connection is successful. Now, exit the Settings option. Open up the SYMA FPV software, and click the START icon to enter into the control panel. The mobile phone screen has entered into the real-time imaging scenarios. The full bar of the WIFI's signal indicates that the current signal is at its strongest. iy 1, Open up SYMA FPV 2. Click on START icon. 3. The mobile phone software. screen is displays with real-time imaging scenarios. 3. Real-time transmission gui icon description 1. Back 2. WIFIs Signal 3. Checking of Photos and Videos 4. Video Recording 5. Photo-Taking 6. Video Recording Time Display 4. Real-time transmission aerial photo-taking Photo-Taking and Video Recording: When the WIFI camera is operating in normal conditions, please click on the photo or video icon on the real-time transmission GUI, and immediately you can conduct photo-taking or video recording. (The completed files for photo-taking or video recording can be found in the Checking of Photos and Videos files.) 5. Memory card storage function. This 720P WIFI camera has the function of memory card storage. When 720P WIFI camera has the memory card, mobile phone and memory card will store pictures/
videos simultaneously. When 720P WIFI camera has no memory card, pictures/cards are only stored in a mobile phone. Aircraft operation guidance In order to satisfy the different operating habits of the consumers, this remote control is installed with two types of different operating modes, Mode 1 and Mode 2. Upon starting up, press Button B towards the right and switch on the power supply of the remote control simultaneously can toggle between Mode 1 and Mode 2. Aircraft controlling diagram (mode 1 and default mode upon start-up) Operating direction Ascending and descending control PREC UM cms lod When the left joystick (Accelerator) is When the right joystick (Turning Rudder) pushed upwards or downwards,the is pushed upwards or downwards, the aircraft will ascend or descend aircraft will advance forward or backward correspondingly. correspondingly.
When the left joystick (Accelerator) is pushed towards the left or right, the aircraft will turn left or right correspondingly. Fine-tuning operation When the right joystick (Turning Rudder) is pushed towards the left or right, the aircraft will fly sideward on the left or right correspondingly. When the aircraft is hovering in the air, in the event that the aircraft is automatically advancing forward or backward, it can be rectified by pressing downwards or upwards the fine-tuning button correspondingly. When the aircraft is hovering in the air, in the event that the aircraft is automatically flying sideward on the left or right, it can be rectified by pressing right or left on the fine-tuning button correspondingly. When the aircraft is hovering in the air, in the event that the aircraft is automatically turning left or right, it can be rectified by pressing right or left on the fine-
tuning button correspondingly. Aircraft controlling diagram (mode 2) Operating direction When the left joystick (Accelerator) is pushed upwards or downwards, the aircraft will ascend or descend correspondingly. When the right joystick (Turning Rudder) is pushed upwards or downwards, the aircraft will advance forward or backward correspondingly. When the right joystick (Turning Rudder) is pushed towards the left or right, the aircraft will turn left or right correspondingly. Fine-tuning operation When the left joystick (Accelerator) is pushed towards the left or right, the aircraft will fly sideward on the left or right correspondingly. When the aircraft is hovering in the air, in the event that the aircraft is automatically advancing forward or backward, it can be rectified by pressing downwards or upwards the fine-tuning button correspondingly. When the aircraft is hovering in the air, in the event that the aircraft is automatically flying sideward towards the left or right, it can be rectified by pressing right or left on the fine-tuning button correspondingly. When the aircraft is hovering in the air, in the event that the aircraft is automatically turning left or right, it can be rectified by pressing right or left on the fine-tuning button correspondingly. Flight preparation and switching im Cee id
|. Flight preparation Step 1: Open up the Step 2. Open battery Step 3. Enclose battery power supply switch cover, and connect into the fuselage, after of the remote control. battery connector closing battery cover, with dash receiver. turn on the switch on the bottom of aircraft. Step 4: Push the left lever (accelerator) to the highest point and then reset to the lowest point. When the indicator lights in the aircraft change from quick flashing to the continuous lighting, it means that the aircraft goes into the flight standby mode.
-11-
Il. Switching on the aircraft Method 1: push the left lever (accelerator) to the highest point and then reset to the center, the ventilation blade of aircraft starts rotating slowly. Method 2: Move the left and right joysticks inwards in an internal loop of 8 for 1 second, the ventilation blade of aircraft starts rotating slowly. Method 1: Push the left joystick (Accelerator) to the lowest level and stay there for 2 to 3 seconds, the aircraft can then be switched off. Method 2: Move the left and right joysticks inwards in an internal loop of 8 for 1 second, and the aircraft can be switched off. Product features I. Low-voltage protection:
When the four indicator lights at the bottom of aircraft start flicking, it means that the aircraft's battery power is low. At this time, the aircraft will initiate the height- is limiting function and will drop to certain safety height.
-12-
Il. Overcurrent protection:
When the aircraft encounters direct impact from foreign object or is stuck under the circumstances in which its blades are rotating, the electric circuit of the aircraft will enter into the overcurrent protection mode. Level calibration function:
Place the aircraft on a levelling surface and at the same time, push both left and right joysticks to the lower right corners and stay there for 2 to 3 seconds; the normal light indicator on the aircraft will blink rapidly, and it will return back to the normal status after about 2 to 3 seconds. The level calibration is successful.
/, 3D overturning function:
When you are familiar with the basic actions, you can proceed to explore even more exciting and risky overturning actions. Fly the aircraft to a height of above 5 m from the ground, press against the upper right corner button (Overturning Button) on the remote control and simultaneously push the right joystick to the highest level of Front/Back/Left/Right, the aircraft will now be executing the Front/Back/Left/Right overturning function. Note: When the batteries are fully charged, it will have the best overturning effe V. Pressure hovering height adjustment function:
After using the left joystick (Accelerator) to control the ascending / descending flight of the aircraft, free up the left joystick (Accelerator) and the aircraft will still hover at that height which the joystick is free. VI. Headless function:
1. Defining forward direction:
1. Open up the power supply switch of the Fo] terete conta
-13-
2. After connecting the aircraft to the power supply, push the switch to ON location, and adjust the specified direction of the aircraft's head under the headless mode as the new forward direction. 3. Push the accelerator joystick of the remote control to the highest level and then, pull back into the lowest level. When the remote control issues a long beep sound, it means the frequency and defining forward direction functions are completed. 2. Toggling between headless function and normal function:
1. When the aircraft has completed its matching of frequency, the default of the aircraft is normal mode. At this time, the light indicator on the aircraft is in the long blinking mode. When pressing and holding on to the left upper corner of the headless function toggle button for 2 seconds, the remote control will issue a Di, Di, Di, ... . sound indicating it has entered into the headless mode. In subsequent long pressing on the same button for 2 seconds, upon hearing a long Di sound, the aircraft has exited from the headless mode. In the headless mode, the four lights on the aircraft is slowly blinking. Every blink is within 4 seconds) 2. Under the headless mode, the operator does not require to differentiate the head position of the aircraft, and he just needs to control the aircraft using the joysticks direction of the remote control. 3. Rectification for the defining forward direction function:
1. When the aircraft encounters a direct impact with foreign objects in the headless mode, if there is an occurrence of deviation of the defined direction, it is only required to push the accelerator and the direction joystick to the left bottom corners simultaneously after rectifying the flying direction of the aircraft in the correction direction. When the light indicator of the aircraft is in a long ON mode after slowly blinking for3 seconds, it rectification is complete. indicates the
-14-
Battery replacement and charging method Steps of battery replacement:
1. Turn offaircraft's 2. Openaircrafts 3. Connect battery 4, After battery power supply, battery cover interface with replacement, and push the backward. dash receiver. fasten the switch to OFF. battery cover Steps of battery charge: again. 4. Connect battery 2. Connect charger to switch with charger. power supply socket. Balanced charger:
1, Insert adapters DC outlet into import socket of balanced charger. Red light of balanced charger will light on. 2. Insert three-position balanced plug of power battery to output end of charger. Green light of balanced charger will light on. When green light extinguishes, it means the end of battery charging. (Charging time is less than 200 minutes) Note: if power battery inserts into the charger, the light has no change. It indicates that this battery is full energy. There is no need to recharge. The charging time is less than 200 minutes; In hover flight
(ecole lem Coe UE MUU Cautions when charging:
- When charging, please put this product on a dried or ventilated area and keep it far away from heat source or explosive product.
-When charging, please remove the batteries from the quadcopter. Then charging process should be supervised by an adult so as not to cause an accident.
- When finish flying, please do not charge the battery if the surface temperature is still not cool. Otherwise it may cause a swollen battery or even a fire hazard.
- Please make sure that you use the original USB charging cable provided. When the battery has been used for a long time, or appears to be swollen, please replace them.
- A battery when not in use for a long time will lose its charge automatically. Charging or discharging too often may reduce the life of the battery.
-15-
- Risk of explosion if battery is replaced by an incorrect type.Dispose of used batteries according to the instructions.
- The following instructions were NOT marked.
- Rechargeable batteries are to be removed from the toy before being charged. Rechargeable batteries are only to be charged under adult supervision.
- Exhausted batteries are to be removed from the toy.
- Transformers used with the toy are to be regularly examined for damage to the cord, plug,enclosure and other parts,and that,in the event of such damage,the toys must not be used with this transformer until the damage has been repaired.
- Warning! The toy is to be assembled by an adult.
- Rechargeable batteries are to be removed from the toy before being charged .
- Rechargeable batteries are only to be charged under adult supervision .
- Exhausted batteries are to be removed from the toy.
- After the battery cover of remote controller is opened by the tool (screw driver), 4 AA batteries are correctly installed according to the positive and negative electrode. Then, the battery cover is closed. Finally, the screw driver is used to screw down the battery cover. The aircraft should be connected with 2000mAh and 7.4V lithium battery after the battery cover is opened manually. Then, the battery cover is closed manually. Install camera Installation camera steps :
Figure 1 Figure 2 Figure 3 4. Figure (1) shows the memory card into the slot on the back of the camera. 2.Push the camera and tight it as figure (2). 3.Connect the camera power line into the socket on quadcopter body as figure (3). Disassembly camera steps:
Figure 1 Figure 2 Figure 3 Figure 4
-16-
1. Pull out power supply cable of the camera as shown in Figure (1). 2. Press down safe lock of lower main body as shown in Figure (2). 3. Push forward the camera and take it out as shown in Figure (3). 4. Figure (4) shows the memory card from the camera pull the head. Pye Ce eee disassembly of aircraft Steps of fan blades disassembly:
Figure 1 1, Rotate and back out fan blade cover in anti-clockwise direction as shown in figure (1) . Figure 1 4. Insert fan blade into principal axis pipe as shown in figure (1) Figure 2 2. Rotate blade lockstitch for about 90 in the anti-clockwise as figure(2) till the iron shaft point to the opening of blade lockstitch. Installation steps of fan blade:
ll Figure 2 2. Install the blade lockstitch inside the quill as figure
(2) shows to ensure that the gap of blade lockstitch aligns at the hole on the quill. Figure 3 3. Get iron shaft out and pull blade lockstitch upward as figure (3) shows. Figure 3 3. Install the iron shaft inside and rotate blade lockstitch for about ninety degrees in the clockwise direction shown in figure (3). Figure 4 4, Pull out fan blade upward as shown in figure (4). Figure 4 4. Rotate and twist fan blade cover in clockwise direction as shown in figure (4).
-17-
Rectification procedures Problem Reason Solution
. The aircraft has entered into 1. Charge up the aircraft. lowvoltage protection. 2. Change the batteries of The aircraft . When the power of the remote the remote control. has no control is weak, the power light | 3. Adjust the channel of response indicator will blink. both the remote control
. The channel selection of the and aircraft such that remote control does not match they are in synchronized with the aircraft's coding. mode. ie ight . The power of the remote 4. Change the batteries, response of the aircraft is not sensitive control is weak. There is an interference with the same frequency as that of the remote control. 2. Change to a place where there is no interference with the same frequency. The aircraft is flying towards its side in one direction during hovering
. The aircraft is not calibrated level to the ground. 1, Re-adjust the calibration until the aircraft is level to the ground. For further details, please refer to Point Ill of Page 13 (Level Calibration Function). In the headless state, it is biased towards the front direction
. Many collisions may cause head biasness. 1, Re-define the front direction. For further details, please kindly refer to Point VI of Page 13 and 14
(Headless Function).
-18-
Accessories (Optional) You can choose your favourite optional accessories as below. In order to make it easier for the customers to choose and purchase, we have specially offered each and every accessory. The accessories can be purchased through the local distributors. Please kindly specify the colours during your purchase. Il X8HW-01 Upper body
(Golden) X8HW-02 Lowe r body
(Golden) X8HW-03 Base stand
(Black) Protective gear
(Black) eed ee AN AN AN AN X8HW-05 Rotating blades
(Black) S|
X8HW-09 Motor A
(Red and blue lines)
| 88 |
X8HW-13, Blade lockstitch X8HW-06 Reversing blades
(Black) X8HW-10 Motor B
(Black and white lines) X8HW-14 Base of dash receiver X8HW-07 Ornament part
(Black) X8HW-11 Main stand X8HW-15, Moter holder
(Golden) XBHW-08 Protective gear MOMMA X8HW-12 Blade cover X8HW-16 Battery cover
(Golden) m ej 0 X8HW-17 Receiver board XBHW-18 Battery XBHW-19 Charge box Wit X8HW-20 Lamp cover q X8HW-21 Remote control X8HW-25 Moblie phone retaining clip X8HW-22 Camera X8HW-23 Iron shaft X8HW-24 Card reader Product descriptions Code Description Quantity] Code Description Quantity | Code Description Quantity 1 Blade cover 4 8 Cear 4 | 15 Receiver board 1 2_|Blade lockstitch | 4 | 9 Main stand 4 [16 Battery 1 3 [Reversing blades|_2 | 10 | Reversingmotor| 2 | 17 | BaggotDash 1 4 [Rotating blades | 2 | 11 | Rotatingmotor | 2 | 18 Lower body 1 5_| Upper body 1] 12 Motor cover 4 | 19 | Battery cover 1 6 [Protecting frames] 4 | 13 | Light boards 4 [20] WIFicamera 1 7 | Ormament part | 4 | 14 | Landing skids 4 Main specifications 500mm 190mm k"| t._ |
500mm 500mm Aircrafts Length:500mm __Aircrafts Width:500mm Aircrafts Height:190mm = Motors Model: 132 Battery: 7.4V/2000mAh lithium battery FECE@ BOXED SPECIFICATIONS AND COLORS OF CONTENTS MAY VARY FROM PHOTO.
-21-
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
(4) Consult the dealer or an experienced radio/TV technician for help. This device must not be collocated or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
-22-
ThisdevicecomplieswithIndustryCanada licence-exemptRSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment a la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inf rieur) approuv pour I'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique a I'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonn e quivalente (p.i.r.e.)ne dpassepas I'intensit ncessaire a |'tablissement d'une communication satisfaisante. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autoris e aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.
-23-
Two-dimension code Two-dimension code of Android system of iphone IOS system The company has the right of final interpretation of this instruction manual statement.