THE GUIDELINE FOR 5' RGB Pixel Tree Model No.:PXL-XM-3D-OX0115-5FT Adapter Rating:Input 120V~60 Hz, 1.5Amax Output: 5V 10.0A IMPORTANT SAFETY INSTRUCTIONSA) READ AND FOLLOW ALL SAFETYINSTRUCTIONS b) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When productsare used in outdoor applications, connect the product to a Ground Fault Circuit interrupting
(GFCI) outlet.If one is not provided, contact a qualified electrician for proper installation. c) This seasonal use product is not intended for permanent installation or use. d) Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat. e) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. f) Do not let lamps rest on the supply cord or on any wire. g) Unplug the product when leaving the house, when retiring for the night, or if left unattended. h) This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock, itshould not be played with or placed where small children can reach it. i) Do not use this product for other than its intended use. j) Do not hang ornaments or other objects from cord, wire, or light string. k) Do not close doors or windows on the product or extension cords as this may damage the wire insulation. l) Do not cover the product with cloth, paper or any material not part of the product when in use. m) This product is equipped with non-replaceable lamps. Do not twist lamps. And if non-replaceable lampsburn out or damaged, do not try to repair or replace it, it shall be discarded. n) Read and follow all instructions that are on the product or provided with the product. WARNING:
When using outdoor use portable lighting products, basic safety precautionsshould always be followed to reduce the risk of fire, electric shock, and personal injury, including the following:
READ ALL INSTRUCTIONS a) Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuits or outlet to be used for the outdoor use flexible lighting product. Receptacles are available having built-in GFCI protection for this measure of safety. WARNING. Remote Control contains button cell battery. HAZARDOUS IF SWALLOWED KEEP OUT OF REACH OF CHILDREN
* SWALLOWING THE BATTERY MAY LEAD TO SERIOUS INJURY OR DEATH IN AS LITTLE AS 2 HOURS DUE TO CHEMICAL BURNS AND POTENTIAL PERFORATION OF THE OESOPHAGUS.
* IF YOU SUSPECT A CHILD HAS SWALLOWED A BUTTON BATTERY, IMMEDIATLEY SEEK MEDICAL ATTENTION.
* REGULARY EXAMINE DEVICES AND MAKE SURE THE BATTERY COMPARTMENT IS CORRECTLY SECURED, E.G. THAT THE MECHANICAL FASTENER IS TIGHTENED. DO NOT USE IF THE COMPARTMENT IS NOT SECURE. Battery Replacement Battery: CR2032 3V Lithium Refer to diagram on back of remote control. Push the small tab on le side towards the larger tab, at the same me pull the larger tab towards you to open the ba ery compartment and remove the ba ery. Ensure that the used ba ery is always in sight by the user un l it is safely disposed of out of reach of small children. Care and Maintenance 1. Before using or reusing, inspect product carefully. Stop using the product if it has cut, damaged or frayed wire insulation or cords, or exposed copper wire. 2. When not in use, store neatly in cool, dry location protected from sunlight. HOW TO ASSEMBLE THE TREE A B PART DESCRIPTION QUANTITY Tree Body 1 A B C E Remote Control and align the Remote Control User Manual 1. Pull out the plastic film from the batter cover to energize the remote. (Fig.1) 2. Point remote to the Tree controller box to function. 1 E Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital, pursuant to Part 15 or the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may casue harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--- Reorient or relocate the receiving antenna.
--- Increase the separation between the equipment and receiver.
--- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--- Consult the dealer or an experienced radio/ TV technician for help.