all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 3.78 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | ID Label/Location Info | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User Manual | Users Manual | 3.78 MiB |
version:1.0 User Manual Body Fat Analyzer LS208-B8 FCC ID:OU9LS208-B8 ZHONGSHAN LIFESENSE ELECTRONICS CO., LTD 23,Jin'an Road, Minzhong, Zhongshan, 528441, Guangdong, China TEL:86-760-88282982 www.transtek.cn Thank you very much for selecting the Transtek Body Fat Analyzer LS208-B8. Please do read the user manual carefully and thoroughly so as to ensure the safe usage of this product, and keep the manual well for further reference in case you have problems. Table of Contents Table of Contents Safety Information Safety and Usage Information Your Scale and Its Environment Efficient Use of Your Scale
.................................................................................................. .............................................................................................. ....................................................................................................... Overview
................................................................................................................. ......................................................................................................................................... ............................................................................................................................. Device Components List LED Display Initial Start-Up General Instructions Insert the Batteries Pair-up Set Up Your Profile Select Measurement Unit Initialising Your Scale Weight Only Operation
................................................................................................................. .................................................................................................................. .................................................................................................................................... ................................................................................................................ ....................................................................................................... .............................................................................................................. ............................................................................................................. Start Measuring First Measurement Daily Measurement Manage Your Health Data Transmission
................................................................................................................... ................................................................................................................. ................................................................................................................... Troubleshooting Error Prompt When Measuring ... When Data Transmitting... ............................................................................................................................ ................................................................................................................. ....................................................................................................... ........................................................................................................................... .............................................................................................................................. ..................................................................................................................................... ........................................................................................................................ Specifications Maintenance Warranty FCC Regulations Appendix Health Tips About Body Fat Health Tips About Body Water Health Tips About Muscle Mass Health Tips About Bone Mass Health Tips About BMI Health Tips - About Calorie EMC Guidance
.................................................................................................. ........................................................................................... ............................................................................................ .............................................................................................. ........................................................................................................ ...................................................................................................... ........................................................................................................................ 2 3 3 4 4 5 6 6 7 8 9 10 10 11 12 13 14 14 16 17 18 18 19 20 21 22 22 23 24 24 1 Safety Information Safety Information Safety and Usage Information The warning signs and symbols are essential to ensure your correct and safe use of this product and protect you and others from injury. Please kindly find the meanings of the warning signs and symbols, which you may encounter in the label and user manual, as follows:
INDICATIONS FOR USE The Transtek Body Fat Analyzer measures weight and estimate BMI and calories, and uses bio-electrical impedance analysis (BIA) technology to estimate body fat, total body water percentage, bone mass, and muscle mass in generally healthy children 10-17 years old and healthy adults. It is intended for use in the domestic setting only. Symbol for THE OPERATION GUIDE MUST BE READ Symbol for MANUFACTURER The Bluetooth Combination Mark Symbol for DIRECT CURRENT Symbol for TYPE BF APPLIED PARTS Symbol for SERIAL NUMBER Symbol for MANUFACTURE DATE CAUTION Symbol for ENVIRONMENT PROTECTION Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice The Body Fat Analyzer LS208-B8 offers you a seamless way to manage your health. Please be aware that this device is designed for adults self-measuring and self-monitoring body fat level. Any information provided by this device is in no way meant to treat, cure or prevent any disease or illness from happening. This device should not be used by anyone who is acutely or chronically ill, suffering from a disease or taking medications that affect your water levels. The accuracy of readings for these patients has not been verified. Specific medical advice should be obtained from a physician. Before diet and exercise, you must first find a professional medical guide. The body fat analyzer is equipped with data transmission function. It may emit electromagnetic energy so as to perform its intended function. Nearby portable and mobile RF communications equipment can affect the performance of the device . Portable and mobile RF communications equipment can affect the measuring accuracy of the body fat analyzer. Kindly note that the use of accessories, transducers or cables other than those specified, with the exception of transducers and cables sold by the manufacturer as replacement parts for internal components, may result in increased EMISSIONS or decreased IMMUNITY of the device. Be aware that misuse of electrical equipments can cause electric shock, burns, fire and other hazards. Please do not use the device in flammable gas environment. Warning that the body fat analyzer should not be used adjacent to or stacked with other equipment. Manufacturer will make available on request circuit diagrams, component parts list,etc. WARNING:No modifications of this equipment is allowed. During using the analyzer, the patient will contact with the surface and the electrode of the Analyzer. The surface and the electrode of the analyzer is type BF Applied part. The device doesnt need to be calibrated in five years lifetime. Do not touch the output of batteries when using the analyzer. The patient is an intended operator. The patient can perform all the operations in the manual, such as measurement, data transmitting, changing batteries. 2 CONTRAINDICATIONS 1. This device is contraindicated for any female subject who may be suspected of, or is pregnant. Besides provided inaccurate readings, the affects of this device on the fetus are unknown. 2. This device is contraindicated for any person who is connected to a wearable or implantable electronic device or instrument such as a pacemaker or defibrillator. Your Scale and Its Environment To ensure your safety as well as the service life of your scale, please avoid using the scale under the following circumstances:
Slippery floor such as tile floor Jumping onto the platform immediately after bath or with wet feet Near a cell phone or microwave oven Avoid storage in the following locations:
Where there is water Where the device may be exposed to extreme temperatures, humidity, moisture, direct sunlight, dust, or salt air Where there is risk of shock or drop Where you store chemicals or full of corrosive gases Where in reach of the infants or children Efficient Use of Your Scale To ensure the accuracy of measurement, please follow below instructions when you start measurement. Place the scale on a flat, hard surface. Soft surface such as carpet will affect the performance of the scale. Step onto the platform with bare feet. Stand still and keep full contact with the scale until the measurement is complete. Start measurement at least two hours after Getting up or Dinning. Avoid measurement immediately after strenuous exercise, sauna or bath, drinking, and dinning. Always start measurement in the same time slot and on the same scale located on the same flat, hard surface. 3 Overview Device Components Up Key List 1. Body Fat Analyzer LS208-B8 2. Four AAA-size Batteries (1.5V per each) 3. User Manual LED Display Down Key Set Key UNIT and activation Button Battery Compartment Sensor LED Display Overview Body Fat Analysis Result Total Body Water Analysis Result Muscle Mass Analysis Result Male Male Athlete Female Bone Mass Analysis Result Female Athlete Calorie Analysis Result Body Mass Index Age Foot Centimeter Body Fat Level: Underfat Body Fat Level: Healthy Body Fat Level: Overfat Body Fat Level: Obese Kilogram Stone Pound Percentage User ID (Rangr form P1 to P8) Successful Bluetooth Connection Data transmitting / pending to transmit to wireless wellness system Low Battery 4 5 Initial Start-Up Initial Start-Up General Instructions Transtek Body Fat Analyzer LS208-B8 applies BIA (Bio-impedance Analysis) technology. A small amount of weak current flows through the human body so as to detect the bio-impedance and estimate calorie, BMI, body fat, body water, muscle mass and bone mass. The electrical current is small and may not be felt. This BIA technology is cheap, safe, non-invasive, toxic-free and harmless. It also possesses the characteristics of simple operation and abundant information. The current mentioned above is less than 0.5mA. However, please be aware that anyone with an wearable or implantable medical electronic instrument, such as a pacemaker, must avoid using this device. The intended use of this device is for healthy children 10-17 years old and healthy adults. Insert the Batteries Open the battery door in the back of the scale. Insert the batteries (4 x 1.5V AAA) into the battery compartment according to the polarity indications marked inside the compartment.
* The digits 8888 will be shown on the LED. Close the battery door and wait until the digits are shown on the LED. CAUTION When the symbol and Lo appear, the device will power off. Then you shall replace with a new set of batteries. Please replace all four batteries at the same time. Do NOT mix the old batteries with the new one. Worn batteries are hazardous waste. Do NOT dispose of them together with the household garbage. Please refer to the local ordinances and recycling instructions regarding disposal of the worn batteries and scrapped device. If you do not intend to use this unit for a prolonged period of time, it is advisable to remove the batteries before storing. Install APP and Pair-Up With the advanced Bluetooth 4.0 technology applied, the mobile or portable equipments, which are equipped with Bluetooth function in line with BLE Technical Specifications as well as BLP Protocol established by global organization Bluetooth SIG, are capable to receive your personal health data. Just simply install the specially-designed app and pair up your scale with your mobile or portable equipments. Then you may enjoy the comprehensive health solution provided by Transtek. Note: It is only available for the device which supports Bluetooth 4.0 technology. Turn on Bluetooth and the App. Make sure both are ON when pair-up is proceeding. Press and hold UNIT button in the back of the scale to start pair-up. Symbol and symbol will be shown on the LED alternatively, indicating pair-up is proceeding. If SUCCEED, symbol PASS will be shown on the LED. If FAIL, symbol FAIL will be shown on the LED. 6 7 Initial Start-Up Set Up Your Profile The body fat analyzer LS208-B8 supports multiple users (Up to 8). You may follow below instructions to assign User ID and set up your own profile, including Gender, Stature, and Age. 1.Assigning User ID With batteries correctly installed, press SET key to enter setting mode when the scale is off. Or when the LED displays 0.0, press and hold SET keyto enter setting mode. The system will request User ID selection first. As pictured below, P1 blinks. The operator may press the function key or to select User ID among P1 to P8. Press SET key to confirm User ID. Initial Start-Up 4.Setting Age After confirming Stature, the system will divert to Age setting. As pictured below, the digits 30 blinks. The operator may press the function key or to increase or decrease the numeral. You may press and hold the function key or for fast changing the numeral. Press SET key to confirm Age. 5. After confirming the Age, the LED will display 0.0, then you can start measuring. 2.Setting Gender After confirming User ID, the system will divert to Gender setting automatically. As pictured below, the portrait blinks. The operator may press the function key or to select Gender.( Male/Female/Male Athlete/ Female Athlete). Press SET key to confirm Gender. Athlete Mode:
An athlete is considered as a person who does 10 hours or more per week of aerobic activity and has a resting heart rate of 60 beats per minute.These individuals should select Athlete Mode for the most accurate measurement results.The body fat analyzer are not calibrated for professional athletes or body builders. 3.Setting Stature After confirming Gender, the system will divert to Stature setting automatically. As pictured below, the digits 165 blinks. The operator may press the function key or to increase or decrease the numeral. You may press and hold the function key or for fast changing the numeral. Press SET key to confirm Stature. 6. Repeat procedure for a second user, or to change user details. Note: To update or overwrite the memorised data, follow the same procedure, making changes as required. Note: You may also set up your profile in the APP, when your smartphone is successfully paired with your scale, the personal profile will be transmitted to your scale via Bluetooth. Select Measurement Unit With batteries correctly installed, press UNIT button in the back of the scale to select measurement unit. The default measurement unit is kg. You may press UNIT button to choose among kilogram, stone and pound. 8 9 Initial Start-Up Initialising Your Scale 1. Press the platform centre and remove your foot. 2. 0.0 will be displayed. Start Measuring First Measurement Please process the user setting before your first measurement.
(Refer to Set Up Your Profile for more details) STEP 1: Step on the platform barefooted when the LED display 0.0. 3. The scale will switch off and is now ready for use. This initialisation process must be repeated if the scale is moved. At all other times step straight on the scale. STEP 2: Stand still and the weight data will be locked with blinking twice when the weight is stable. Keep full contact with the scale until the LED stops displaying moving o. Weight Only Operation Your TRANSTEK Body Fat Analyzer will operate as a conventional weight - reading scale. No special programming steps are required. Once the scale is initialized, as previously described, you may simply step on the scale to measure your current weight. For only weight reading. 1. Position the scale on a flat, hard surface. Carpeted or uneven floors may affect accuracy. 2. Step onto the scale platform and remain still while the scale computes your weight. 3. The scale will display your weight value. STEP 3: The measurement results will be displayed followed by Weight, Body Fat, Total Body Water, Muscle Mass, Bone Mass, Kcal and BMI. The data will be displayed three times and then turn off. 4. The scale will automatically turn off after a few seconds. Note: The weight value wont be saved in the scale, and wont be transmitted to the APP. 10
* If it fails to complete the analysis, the LED will only display the weight data.
(To find out the solutions, please refer to Troubleshooting for more details.) When your scale is successfully paired with your smartphone and the Bluetooth is ON, LS208-B8 will process data transmission instead.
(Please refer to Data Transmission for more details.) 11 Start Measuring Manage Your Health Daily Measurement With original SENSE ON patent technology, LS208-B8 will switch on as you step on the platform barefooted. Stand still and keep full contact with the scale until the LED stops displaying moving o. When your scale is successfully paired with your smartphone and the Bluetooth is ON, LS208-B8 will process data transmission instead.
(Please refer to Data Transmission for more details.) After the weight is locked, if identify the stored weight is during this weight within+/-3 kg, it will identify the specific user ID. If it identifies one user, it will skip the step about user selection, then display the Weight, Body Fat, Total Body Water, Muscle Mass, Bone Mass, Kcal and BMI data sequentially three times and turn off. If it identifies two or more users,for example,P1,P2 and P3, the LED will display these users altermately two times, you may press the function key or to choose the User ID. The measuring results will then be sorted into the User ID you selected and displayed sequentially three times. If you dont choose the user, it will display the weight again and turn off. Data Transmission With LS208-B8 successfully pair-up with your smartphone, the measurement data will be transmitted to your mobile via Bluetooth. ONLY when the measuring results are attached to a specific User ID will it be transmitted to your mobile after measurement. The symbol will disappear after successful data transmission, and you may check your personal health data stored in your smartphone. If the data transmission fails, the symbol will remain. The pending measurement data will be temporarily kept in the scale and transmitted to your smartphone when next measurement is complete. Successful Bluetooth Connection Data transmitting to wireless wellness system:
-If SUCCEED, the symbol disappears;
-If FAIL, the symbol remains. CAUTION Interference may occur in the vicinity of equipment marked with the following symbol . And the Analyzer may interfere vicinity electrical equipment. To enable the data transmission function, this product should be paired to a Bluetooth 4.0 end. How to mitigate possible interference?
1. The range between the Analyzer and the Bluetooth end should be reasonably close, from 1 meter to 10 meters. Please ensure no obstacles between the Analyzer and the Bluetooth end so as to obtain quality connection. 2. To avoid interference, other electronic devices (particularly those with Bluetooth transmission
/ Transmitter) should be kept at least 1 meter away from the Analyzer. If it fails to identify the possible User ID, the LED will only display the weight data then shutdown.
(To find out the solutions, please refer to Troubleshooting for more details.) 12 13 Troubleshooting Error Prompt Troubleshooting Error Description Solution Problem Root Cause Solution Overload. The device will power off. Stop using this scale for measurement. Low Battery. The device will power off. Failure of pairing up your scale with your smartphone. Replace all four batteries in the same time. Please purchase the authorized batteries for replacement. Please check below items:
-Bluetooth is ON.
-App Collector is ON.
-Both devices are within the transmission distance of Bluetooth. There has data doesnt upload. (The notebook icon will be displayed.) Upload the data. When Measuring ... Problem Root Cause Solution Abnormal measuring results:
- Too high; OR
- Too low; OR
- Huge difference between two recent measurement. 14 Incorrect posture. Please step on the platform barefooted and stand still. The device is located on the soft ground such as a carpet OR on a rugged surface. Please place the device on a flat, hard surface. Abnormal measuring results:
- Too high; OR
- Too low; OR
- Huge difference between two recent measurement. No display on LED when the device powers on. Your feet are too dry. Wipe your feet with a damp cloth, keeping them slightly damp when starting measurement. Batteries not yet installed. Worn batteries. Step onto the platform wearing socks or shoes. Install the batteries.
(Please refer to Insert the Batteries) Replace all four batteries at the same time. Please purchase the authorized batteries for replacement. Please keep barefooted during the measurement, and keep full contact with the scale as well. CANNOT proceed to analyze calorie, BMI, body fat, total body water, muscle mass and bone mass. The system cannot identify the possible User ID with most similar data. Please assign a User ID following the instruction in Set Up Your Profile. The user fails to select the User ID from what the system found. Please assign a User ID following the instruction in Set Up Your Profile. The device powers off. Low battery. Replace all four batteries at the same time. Please purchase the authorized batteries for replacement. 15 Troubleshooting Specifications When Data Transmitting ... Problem Root Cause Solution Bluetooth is OFF. Turn ON the Bluetooth via Setting. Specifications Product Name Dimension Net Weight Display Body Fat Analyzer (LS208-B8) Scale: 320x320x26mm (Approximately) Approximately1.98kg Digital LED Measurement Unit Kilogram / Stone/ Pound Data transmission failed. 16 The App is OFF. Press the icon to turn ON your app. Measurement Range 5kg to 180kg / 0st: 11lb to 28st: 5lb / 11lb to 397lb Out of range of Bluetooth transmission. Place your smartphone closer to the scale. None of the user ID is assigned. Please assign a User ID following the instruction in Set Up Your Profile. Division Accuracy 0.1kg / 0.2lb/1lb (20st) 50kg: 0.3kg;
150kg: 0.5kg;
100kg: 0.4kg;
180kg: 0.7kg Working Environment Temperature: 5 to 40 Atmospheric pressure: 86kPa to 106kPa Relative Humidity: 90% RH Storage Environment Temperature: -20 to 60 Relative Humidity: 90% RH Atmospheric pressure: 50kPa to 106kPa Power Source 6V (Four AAA-size Batteries) Turn on Method Auto-OFF Accessories SENSE ON technology The scale will turn off after about 15 seconds if there is no operation 1. Four AAA-size batteries 2. User Manual Mode of Operation Continuous Operation Degree of protection Type BF applied part Software Version Protection Against Ingress of Water A0 IP21 About the Accuracy of This Product This product passes strict inspection before delivery and therefore its accuracy is guaranteed by the manufacturer. Please refer to the above table for the descriptions on accuracy. This product is specially designed for body fat analysis as well as weight measurement. It should NOT be used by anyone during the process of transaction for verification of goods weight. 17 Maintenance Maintenance When carrying out usual maintenance, please ensure practice of the following Dos and Donts:
DO use a dry soft cloth to wipe the dust. DO use a wet soft cloth, dipped into water and wrung out, to wipe the dirt. Then use a dry soft cloth to dry up the device. DONT wash the device with water or immerse it in water. DONT use propellant, abrasive or other chemicals to wipe the dirt in avoidance of discolor or malfunction. DONT disassemble this device. If you have any problems, please contact Transtek.
(Please refer to Warranty for contact information) Warranty Transtek warrants its products free of defects in materials and workmanship in normal use for a period of FIVE years from the date of retail purchase. This warranty does NOT cover damages caused by misuse or abuse, including but not limited to:
Failure caused by unauthorized repairs or modifications;
Damage caused by shock or drop during transportation;
Failure caused by improper operation inconsistent with the instructions stated in this user manual;
Malfunction or damage from failure to provide the recommended maintenance;
Damage caused by improper use of power supply. Should this device require maintenance (or replacement at our option) under warranty, please deliver the original package to ZHONGSHAN LIFESENSE ELECTRONICS CO., LTD prepaid. Please return the store receipt (with the retail purchase date) and a note with reasons to return on it as well. ZHONGSHAN LIFESENSE ELECTRONICS CO., LTD 23,Jin'an Road, Minzhong, Zhongshan, 528441, Guangdong, China Tel: 86-760-88282982 Website: http://www.transtek.cn Appendix FCC Regulations FCC User Guide Information Radio Frequency Interface Requirements - FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna;
Increase the separation between the equipment and receiver;
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
Consult the dealer or an experienced radio / TV technician for help. Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC RF Exposure Guidelines Safety Information Reducing RF Exposure - Use Properly Only operate the device in accordance with the instructions supplied. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. 18 19 Appendix Health Tips - About Body Fat Human body is made up of, amongst other things, a percentage of fat. Body fat is vital for a healthy, functioning body, protects vital organs, helps regulate body temperature, stores vitamins and helps the body sustain itself when food is scarce. However, too much body fat or indeed too little body fat will damage to your health. It is difficult to gauge how much body fat we have in our bodies simply by looking at ourselves in the mirror. This is why it is important to measure and monitor your body fat percentage. Body fat percentage gives you a better measure of fitness than weight alonethe composition of your weight loss could mean you are losing muscle mass rather than fat-you could still have a high percentage of fat even when a scale indicatesnormal weight. Appendix Health Tips - About Body Water Body water is the single most important component of body weight. It represents over half of your total weight and almost two thirds of your lean body mass (predominantly muscle). Water performs a number of important roles in the body:
All the cells in the body, whether in the skin, glands, muscles, brain or anywhere else, can only function properly if they have enough water. Water also plays a vital part in regulating the bodys temperature balance, particularly through perspiration. The combination of your weight and fat measurement could appear to be normal but your body hydration level could be insufficient for healthy living. The table as follows may be used as a guide:
Table of Body Fat Level (Unit: %) a) The body fat percentage (%): 5%-60%/0.1%
Standard for Men Standard for Women The table as follows may be used as a guide:
Table of Body Water Level (Unit: %) b) The body water percentage (%): 43%-73%/0.1%
Source: Derived from Wang & Deurenberg: Hydration of fat-free body mass. American Journal Clin Nutr 1999,69833-841. Rating low Normal Moderately High High 20-29
<13 13-20 30-39
<14 14-21 Age 40-49
<16 16-23 50-59 60+
<18
<17 17-24 18-25 20.1-23 21.1-24 23.1-26 24.1-27 25.1-28
>23
>24
>26
>27
>28 Rating low Normal Moderately High High Age 40-49
<21 21-30 20-29
<19 19-28 30-39
<20 20-29 60+
<23 23-32 28.1-31 29.1-32 30.1-33 31.1-34 32.1-35 50-59
<22 22-31
>31
>32
>33
>34
>35 Source: University of Illinois Department of Food Science and Human Nutrition. Body Fat Percentage Calculator. www.ag.uiuc.edu/~food-lab/ai/bfc.html BF % RANGE 4 to 14%
15 to 21%
22 to 24%
25 and over 4 to 20%
21 to 29%
30 to 32%
33 and over OPTIMAL TBW % RANGE 70 to 63%
63 to 57%
57 to 55%
55 to 37%
70 to 58%
58 to 52%
52 to 49%
49 to 37%
Men Women 20 21 Appendix Appendix Health Tips - About Muscle Mass Health Tips - About BMI Maintaining proper weight is essential to healthy living. Obesity has been linked to a higher risk of heart disease, diabetes and some forms of cancer. The Body Mass Index
(BMI) is the most widely accepted measurement of weight according to health professionals. The Analyzer will calculate your BMI on your height and weight. The table as follows may be used as a guide:
According to the American College of Sports Medicine (ACSM), lean muscle mass may decrease by nearly 50 percent between the age of 20 and 90. If you do nothing with it youre losing muscle and increasing fat. It is also important to know your muscle mass %
during weight reduction. At rest, the body burns approximately 110 additional calories for each kilo of muscle gained. Benifits of gaining muscle mass include:
Reversing the decline in strength, bone density and muscle mass with aging Maintenance of flexible joints Guide weight reduction when combined with a healthy diet. The table as follows may be used as a guide:
Muscle Mass Percentage
(Source: International Commission on Radiological Protection,1975) Men Women Approximately 40% of total body weight Approximately 30% of total body weight Health Tips - About Bone Mass Regular exercise and a balanced diet can help maintain healthy bones. Like muscle, bone is a living tissue that can respond to exercise by becoming stronger. For most people, bone mass peaks in their thirties. Then people begin to lose bone. Regular exercise can help prevent that loss. Calcium and vitamin D, good sources of which are dairy products, green leafy vegetables and fish, contribute to healthy bones. The bone mass readings given by this product are anestimation of the amount of bone in your body. Those with osteoporosis or low bone densities may not get accurate estimations. If you have any concern regarding your bones please consult your doctor timely. The table as follows may be used as a guide:
Bone Mass Percentage
(Source: Rico et al.1993) The average bone mass percentage for both men and women is between 4 to 5%. 22 23 Appendix Appendix Health Tips - About Calorie The device uses your age, height, gender and an activity level setting to calculate the estimated number of calories you can consume a day to maintain your present weight. This estimation may gradually help you with a weight loss, gain or maintenance plan. EMC Guidance Table 1 Guidance and MANUFACTURERs declaration ELECTROMAGNETIC EMISSIONS- for all ME EQUIPMENT and ME SYSTEMS Guidance and manufacturers declaration electromagnetic emissions The device is intended for use in the electromagnetic environment specified below. The customer or the user of the device should assure that it is used in such an environment. Emissions test Compliance Electromagnetic environment - guidance The device must emit electromagnetic energy in order to perform its intended function. Nearby electronic equipment may be affected. RF emissions CISPR 11 RF emissions CISPR 11 Harmonic emissions IEC 61000-3-2 Voltage fluctuations/
flicker emissions IEC 61000-3-3 Group 2 Class B Not applicable Not applicable Table 2 Guidance and MANUFACTURERs declaration electromagnetic IMMUNITY for all ME EQUIPMENT and ME SYSTEMS Guidance and manufacturers declaration electromagnetic immunity The device is intended for use in the electromagnetic environment specified below. The customer or the user of the device should assure that it is used in such an environment IMMUNITY test IEC 60601 test level C ompliance level Electrostatic discharge (ESD) IEC 61000-4-2 6 kV contact 8 kV air 6 kV contact 8 kV air Electrical fast transient/burst IEC 61000-4-4 Surge IEC 61000-4-5 Voltage dips, short interruptions and voltage variations on power supply input lines IEC 61000-4-11 Power frequency
(50/60Hz) magnetic field IEC 61000-4-8 Not applicable Not applicable Not applicable 2 kV for power supply lines 1 kV for input/output lines 1 kV line(s) to line(s) 2 kV line(s) to earth
<5% UT
(>95% dip in UT for 0.5 cycle 40% UT
(60% dip in UT for 5 cycles 70% UT
(30% dip in UT for 25 cycles
<5% UT
(>95% dip in UT for 5 s
)
)
)
) 3A/m 3A/m Electromagnetic environment - guidance Floors should be wood, concrete or ceramic tile. If floors are covered with synthetic material, the relative humidity should be at least 30%. Mains power quality should be that of a typical commercial or hospital environment. Mains power quality should be that of a typical commercial or hospital environment. Mains power quality should be that of a typical commercial or hospital environment. If the user of the device requires continued operation during power mains interruptions, it is recommended that the device be powered from an uninterruptible power supply or a battery. Power frequency magnetic fields should be at levels characteristic of a typical location in a typical commercial or hospital environment. NOTE UT is the a.c. mains voltage prior to application of the test level. 24 25 Appendix Appendix Table 4 Guidance and MANUFACTURERs declaration electromagnetic IMMUNITY for ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING Guidance and manufacturers declaration electromagnetic immunity The device is intended for use in the electromagnetic environment specified below. The customer or the user of the device should assure that it is used in such an environment. IMMUNITY test IEC 60601 TEST LEVEL Compliance level Electromagnetic environment -
guidance Conducted RF IEC 61000-4-6 Radiated RF IEC 61000-4-3 3 Vrms 150 kHz to 80 MHz 3 V/m 80 MHz to 2.5 GHz Portable and mobile RF communications equipment should be used no closer to any part of the device, including cables, than the recommended separation distance calculated from the equation applicable to the frequency of the transmitter. Recommended separation distance Not applicable
=d
]5,3[
V 1 P 3 V/m
=d 1.167 P 80 MHz to 800 MHz P 2.333 800 MHz to 2,5 GHz
=d where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer and d is the recommended separation distance in metres (m). a Field strengths from fixed RF transmitters, as determined by an electromagnetic site survey, should be less than the compliance level in each frequency range. Interference may occur in the vicinity of equipment marked with the following symbol:
b At 80 MHz and 800 MHz, the higher frequency range applies. These guidelines may not apply in all situations. Electromagnetic NOTE 1 NOTE 2 propagation is affected by absorption and reflection from structures, objects and people. a Field strengths from fixed transmitters, such as base stations for radio (cellular /
cordless) telephones and land mobile radios, amateur radio, AM and FM radio broad-
cast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the device is used exceeds the applicable RF compliance level above, the device should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as re-orienting or relocating the device. Over the frequency range 150 kHz to 80 MHz, field strengths should be less than
[ ]V/m. V1 b 26 Table 6 Recommended separation distances between portable and mobile RF communications equipment and the ME EQUIPMENT or ME SYSTEM for ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING between portable and mobile RF communications equipment and the device. Recommended separation distances The device is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the device can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmittters) and the device as recommended below, according to the maximum output power of the communications equipment. Rated maximum output power of transmitter
(W) Separation distance according to frequency of transmitter (m) 150 kHz to 80 MHz P
=d
]5,3[
V 1 80 MHz to 800 MHz
=d 1.167 P 800 MHz to 2.5 GHz 2.333 P
=d 0.01 0.1 1 10 100 Not applicable Not applicable Not applicable Not applicable Not applicable 0.117 0.369 1.167 3.690 11.67 0.233 0.738 2.333 7.378 23.33 For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer. NOTE 1 At 80MHz and 800MHz, the separation distance for the higher frequency range applies. NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people. 27
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-11-23 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2016-11-23
|
||||
1 | Applicant's complete, legal business name |
Guangdong Transtek Medical Electronics Co.,Ltd
|
||||
1 | FCC Registration Number (FRN) |
0021999248
|
||||
1 | Physical Address |
Zone A, No.105,Dongli Road Torch Development District
|
||||
1 |
Zone A, No.105,Dongli Road
|
|||||
1 |
Zhongshan, Guangdong, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
V******@tuvam.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
OU9
|
||||
1 | Equipment Product Code |
LS208-B08
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
K**** T****
|
||||
1 | Title |
R&D Director
|
||||
1 | Telephone Number |
+86-7********
|
||||
1 | Fax Number |
+86-7********
|
||||
1 |
q******@transtekcorp.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Body Fat Analyzer | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power is peak conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
TUV SUD Certification and Testing (China) Co., Ltd
|
||||
1 | Name |
R******** G****
|
||||
1 | Telephone Number |
00867********
|
||||
1 | Fax Number |
00867********
|
||||
1 |
r******@tuv-sud.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0008600 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC