LS901-E Product structure Power Adaptor Socket Broadband Interface LAN Light Internet Cable Reset Button WAN Light Power Adaptor Before using 1 Open Broadband Service Open standard broadband service,such as telecommunication, Great Wall, Unicom, Railcom 2 Environmental Requirements of Area Network PC automatically connect to the network via router, User can enter into base station installation steps directly. PC not connect to the network via router, User can buy a router, refer to the user manual to set up the router to autodial and connect to the network. Unable to distinguish whether PC connect to the network via router. 1) Turn on PC, if PC automatically connect to the network, which indicates PC automatically connect to the network via router.(Please refer to ) 2) Turn on PC, if PC need to autodial to connect to the network, which indicates PC not connect to the network via router. (Please refer to )
(Everytime connecting the network, if the screen display dail-up interface, which indicates PC not connect to the network via router) Install data bridge 1 Use power adaptor to connect power source and bridge. 2 Use internet cable to connect bridge with LAN interface of the router. 3 When WAN and LAN light on the bridge turns green, which indicates the connection is successful. Caution To prevent the product hurting people during using and prolong product lifetime, please follow below rules. Symbol Meaning Regular instruction Forbidden Disassemble forbidden About battery use Avoid the water, dust and others on the adapter. When the surface of the adapter is broken, please do not use it. Please do not disassemble or repair the adapter without professional instruction. Product instruction Please keep your hands dry to install the data bridge. Data bridge will cache data due to network problem. Please turn off the power and network during a lightning storm. Data bridge only applies to Lifesense dedicated power adaptor, please dont use other type. For unprofessional person, please dont teardown it alone. About product daily maintenance Please put the data bridge at cool and dry place. Please dont immerse in water or liquid. 1 Using the wet clothing to remove the dirt on the product. Please do not disassemble the products without professional people s instruction. 2 Please put liquid soap on the cloth, and wring out it to wipe out the dirt on the surface, at the end pls use dry cloth to wipe. Trouble shooting Symptom Fault cause Solution Turn on power, LAN and WAN light is dark Turn on power, LAN and WAN light is shining Power connecting error Data bridge connect to the router is abnormal LAN lights up, WAN is shining PC can enter the internet But bridge cant enter the internet LAN and WAN light turns green, data was sucessfully sent from device, but not shown in health center Not choose user for the device Data cant automatically distinguish the user Please check the power connecting situation of the data bridge 1) Please check the power connecting situation of the router 2) Please check the connecting situation between bridge and router 1) If DHCP function on router was open, press reset button for a moment on bridge to make it reset to factory defaults 2) If DHCP function on router wasnt open, pls refer to IP setting up method on bridge (page 5) Please add user in device management interface Please go to get the data from device management interface Advanced setting
(Attention: only for user whose DHCP function on router wasnt open) 1 Press reset button, and hold it more than 5 seconds LAN and WAN light shining at the same time, pls loose the button. 2 Connect bridge to PC by internet cable directly 3 Setting up the network on PC and save, pls refer to below image:
5 If setting up is successful, below interface will shown. 6 If setting up is fail, below interface will shown:
4 Open IE browser, put http://192.168.1.2/
into the address column, enter into the address, below interface will shown. If choose automatically get IP address, for DNS address we can choose automatically or manually put in. If choose manually put in IP address, for DNS address we have to manually put in accordingly. Bridge will reset and run automatically, setting begin to take effect. Please try to set again. Specifications Solution Product name Parameter LS901-E Product dimension 100 x 58 x 24mm Product Weight 62g Display 2 green LED light Internet cable 1m, with RJ45 socket Power RF distance Match distance DC 5.0V 30m 1m Normal working condition Storage & transportation condition Working atmospheric pressure Temperature:
Temperature:
80kPa ~ 105kPa Humidity:
Humidity:
Storage & transportation atmospheric pressure 80kPa ~ 105kPa This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 14 15