LS401-E Product structure Before using 1 Install the bridge. Please refer to the bridge instruction manual.
(If already install the bridge, skip the steps.) 2 Register the account and add the members.
(If already have the account please skip the steps.) 1) Please enter into www.lifesense.com, make the free account. Button Indicator light Charging dot 2) Register the family account. 3) RAdd a family member. 4) Select program. 3 Add the device. 1) Click the device and add the device. 2) Input the serial No. 3) Add the user. 4) Activate the device. 5) wait for activation. 5) Successfully add. 4 Battery charging. Successfully add!
The page will be automatically closed in 3 second 1) Put the pedometer into the charging plate. 2) Charging with the usb cable linked to the pc. It finishes in around 1.5 hours, and shows all the indicator lights. 5 Products activation. 1) Device should be less than 1 meter away from the bridge. 2) Long press the button for 5 sec. 3) Successfully activated after it shows you 6 green indicator lights. Usage 1 Measurement and data sending. 1) Log in health care center and set a week target. 4 Go to www.lifesense.com to check how many step you finished. 2 Measure your step wherever you want. 3 Automatically transmit the data to the server when the pedometer is close enough to the bridge. Attention: if you change an user, please long press activation button. 5 Target and battery margin check. 1) Daily target check Press the button, how many lights you see means how fulfill how many days task. 2) Weekly target check Press the button after you see the green lights, then you will see orange lights, how many of them you see means how many week task you finish. 3) Power Inquires Press the button when it shows the orange indication light. How many red lights you see means how much power the blood pressure monitor has. Cautions In order to avoid others being hurt by the product and extend its lifetime, please obey the following cautions.
(all green lights show, it means you finish the daily task.) Symbol Meaning 4 orange lights are on and the fifth is flickering, it means you finish 4/7 for the weekly task. it shows 3 red light, that means, you have 3/7 battery left. General Indication Forbiden don't disassemble About recharging About usage After recharging 2-3 times, the performance can be perfect Battery duration: 13 days During charging, its normal if the product is a little fever Charging within 0-40 celsius degree All green lights shows if it finishes charging The recharger is only for LS401-E pedometre Dont store the recharger in a hot or wet place Dont disassemble the product yourself Please take the pedometer as mentioned Dont use the pedometer where it is in strong radiation which would influence the accuracy Data can be saved for 30 days before transmitted Please dont disassemble the product if you are not professional Product maintenance Put the product where it is dry and cool Put the product on a level table when you dont use it Dont disassemble the product after you abandon it, and obey citys rule of environment Clean 1 Use tissue to clean the dirt on the pedometer. 2 Dry the pedometer after clean it with soaped wiping. Cautions Phenomenon No indicator light Fail activation Reason Low battery interference No account Methods Recharging Keep closer to the bridge Log on www.lifesense.com for setting Activate too many products at the same time Do it one by one Weak signal to the server Check network status Fail data uploading Out of transmitting range Move the products towards to the bridge. Data can be transmitted in 30m without barrier. Increasing steps are less than 100 Make it more than 100 Network error Check network status Fail display on weekly target and led Sync the pedometer with the server Check connection between the bridge and pedometer Manually input the data Log on the health care system Product can not be recharged Error of usb plug Change usb plug Wrongly put the pedometer into the charger base Re- put it as instruction Product Specification Items Product Name Voltage Recharging Display Steps Calories Content Pedometer LS401-E 45mAh Lipolymer battery DC 5.0V, standard usb plug 7 led lights 0-99999 steps, division 1 step 0- 9999.9k calories, division 0.1k calories Battery grade Battery releasing 1-7 grade, division: 1 grade 500 times Battery life Data capacity 13 days once recharging Data of 30 days Transmitting range 30 meters (in open place) Dimension 60x44.7x11.3mm Working Condition Storage and Transportation Condition Temperature: 0~40Humidity90% RH Temperature: -20-60Humidity90% RH This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. 27 28