FCC ID: 2AVYJ-V100 Robotic Vacuum Cleaner

Robot vacuum cleaner Important Safety Instructions WARNING: TO REDUCE THE RISK OF INJURY OR DAMAGE, READ THE FOLLOWING SAFETY PRECAUTIONS WHEN SETTING UP, USING AND MAINTAINING YOUR ROBOT. CAUTION This product is designed for indoor floor cleaning only, do not use it outdoors(such as on an open-ended terrace), on any surface other than the ground(such as a sofa), or in any commercial or industrial environment. Do not use this product on elevated surfaces without barriers such as the floor of a loft, an open-ended terrace, or on top of furniture. Do not use the product when the ambient temperature is higher than 104F(40C), lower than 39F(4C), or if there are liquids or tacky substances on the floor. Before using the product, move wires off the ground or place them to the side to prevent them being pulled on by the cleaner. To prevent blocking the product and to avoid damage to valuables, remove light-weight items(such as plastic bags)and fragile objects(such as vases)from the floor before cleaning. Children should be supervised to ensure that they do not play with the appliance. This product is not intended for use by persons(including children)with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be made by children without supervision(EU). Keep the main brush cleaning tools out of reach of children. Do not place any object(including children and pets)on the product, whether it is in operation or not. Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts. Do not use the product on burning objects(such as cigarette butts). Do not use the product on high pile carpets(product effectiveness may also be reduced on dark carpets). Do not use the product to clean hard or sharp objects(such as decoration wastes, glass and nails). Do not carry the product by using the main unit cover, or collision buffer. The product must be switched and the plug must be removed from socket-outlet before cleaning or maintaining the product. Do not use wet cloth or liquids for cleaning the product. Do not use the mopping module on carpets. Use the product according to the manual, any loss or damage caused from improper use will be borne by the user. This product contains batteries that are only replaceable by skilled persons. 1 Important Safety Instructions Battery and Charging Do not charge non-rechargeable batteries. For the purposes of recharging the battery, only use the detachable supply unit 360 robot provided with this product. Do not dismantle, repair or modify the battery or charging dock. Keep the charging dock away from heat(such as heating vents). The battery must be removed from the appliance before it is scrapped. The product must be disconnected from the power supply when removing the battery. The battery must be disposed of safely. Do not discard waste batteries, leaving them with a professional recycling organization. Do not wipe or clean the charger prongs with wet cloth or wet hands. If the power cord is damaged, stop using it immediately. It must be replaced by the manufacturer, service agent, or similarly qualified persons to avoid a hazard. 2 Product Introduction Robot vacuum cleaner Charging dock Adapter Dust bin Electrical water tank Remote control N E P O A A A A A A AAA Battery for remote control x2 Cleaning tool HEPA filter Mop cloth Side brushes User manual 3 Product Introduction Top view Docking station Bottom view Cliff sensor Charging metal contact piece Side brush Back wheel Power indicator Charging contacts Visual camera Power/Auto cleaning Spot cleaning Hotspot AP distribution network Recharge Smart distribution network Anti-collision bumper Speaker Power switch Dust bin Power Socket Cable lines collect slot Anti-slip mat Charging metal Contact piece Omnidirectional wheel Side brush Battery cover Back wheel Main brush Dust bin 4 Product Introduction Dust bin Primary filter Sponge filter Water tank HEPA filter Dust bin cover Dust bin button Dust bin block slice Dust bin unit Water tank cover High efficiency filter Sponge filter Primary filter OPEN Water tank latch Remote control Auto cleaning Direction forward Left direction Spot cleaning Seek the robot Suction power Recharge button On/Pause button Right direction Edge cleaning Water flow control Water tank unit Water tank button 5 Installation Using the robot 1. Remove the EVA foam on each side. 3. Turn the robot over to install the side brushes. Install the side brushes Install the side brushes on both sides of the roller at the bottom of the main unit. Pick up the side brushes with your hands and aim at the hole of the side brush installed on the base(note that the square column and the square hole correspond to each other), press it down to hear a click" sound, indicating that the side brush is installed in place. 2. Place the charging dock against the wall on a flat surface and plug it into the power socket. more than 3ft/1m more than 6ft/2m more than 3ft/1m Note:

The charging dock should have more than 1.0m(3.0ft) of clearance on each side, and more than 2.0m(6.0ft)in the front. If the power cable is vertical to the ground, it may be caught by the robot, causing the charging dock to be disconnected. The charging dock indicator is on when the charging dock is electrified, and off when the robot is charging. 6 Installation Using the robot 4. Power and charge 1. Auto: After cleaning, the robot will automatically return to the charging dock to charge. 2. Manual: In Pause mode, press the button to send the robot back to the charging dock. 3. Recharge by remote control. Note:

1. The battery is fully charged to prolong the battery life. 5 hours charging time for the first time. 2. Please keep charging dock power on, or the robot can not find the charging dock. Recharge Button Indication in Charging Charging Status Indicator of Recharge Button Low power/Back to charge Flashing blue Charging Charging completed Blue light Blue light off 5.Power on/off/Pause 1.Turn on the main power switch I is turned on, o is turned off. 2. Press to start cleaning (Start up the default zig-zag auto cleaning mode) 3. Press the button again to stop cleaning (The robot is in standby mode) 4. The robot is not working if leaving dock station The robot will be in standby mode. If the robot does not work for a long time, please disconnect the power. 7 6. Water tank 1. Open the water tank, fill it with water, and close it tightly. 2. Install the mop cloth. 3. Install water tank. 4. Start mopping. N E P O Note:

After finishing mopping, please empty the water tank. Take off the mop and clean it. Note:

It is recommended that all are vacuumed at least three times before the

mopping session to reduce excessive dirt build up on the mop. Do not put detergent, disinfectants, perfume, or other chemicals in the water tank. Remove the mopping module after mopping, empty residual water and clean the mop cloth to prevent mildew or unpleasant odors. Remove the mopping module if not mopping. Instructions for use Auto Cleaning The robot defaults auto cleaning mode after power on. Zig-zag cleaning. Edge Cleaning The robot cleans around the wall edge. Spot Cleaning Applicable for garbage concentrated area. The robot cleans in a spiral shaped in designated area. After cleanup, the robot will return to the center of square. Schedule Cleaning Use the app to set start times for scheduled cleanups. The default cleaning mode is auto cleaning. 8 App Instruction Download the mobile phone App Method 1

:Search for "Botslab" in Google Play or App Store and download it. Method 2 scanner App to download the Botslab App.

:Scan the QR code below by using mobile phone camera or any QR code Botslab Note:

Please check out further operation instructions in "My - My Service"

on the App and do not hesitate to contact us if you have any if you have any questions or comments. 9 Maintenance Dust bin and filter cleaning It is recommended to clean the dust bin and filter in time. A. Pull out the dust bin by pressing the button on the back of robot. Main brush assembling and cleaning B. Press and hold the button on the dust bin to open the dust bin and take out the garbage. Side brush cleaning A. Use a brush cleaning tool to cut off the entangled debris. B. Use a clean cloth to clean the side brush. Note: Side brush replacement every 3-6 months is recommended to maintain cleaning quality. C. Take off the filter and filter foam from the inside of the dust bin, and clean it with a brush or cloth. Note:

1. Filter life time is 24 months. It is recommended to wash it by water per 15-30 days. 2. After washing, recommended to dry. Do not squeeze, Do not expose to the sun. 10 C. When the side brush can not be used, please remove the damaged side brush and replace it in time. Note:

Cleaning water must be lower than 60 degree celsius. Maintenance Specifications Omnidirectional wheel cleaning 1. Turn the robot over. 2. Pull out the wheel upwards. 3. Reinstall after cleaning and press firmly. 4. Rinse the axle and the wheel with water to remove any hair and dirt. 5. Dry and reinstall the wheel then press it back in place. Robot sensor and cleaning Use a soft dry cloth to clean the sensors. Note: Do not touch the sensors directly with liquids such as water and thinner. Main unit Name

Dimensions 320*320*76mm Product weight 2.9Kg Battery capacity Minimum capacity: 2500mAh, 36Wh Standard capacity: 2550mAh, 36.72Wh Rated voltage Rated power 14.4V 32W Charging dock Name

Dimensions Rated power Rated output 183*140*76mm 19W 19W Wireless Parameter Frequency band &

signal transmission WiFi, 2.4 GHz; 20 dBm 11 Troubleshooting Error The main brush is tangled up The side brush is tangled up Solution Please clean the roller brush Please clean the side brush A wheel is abnormal and the robot jammed Please check the driving wheels The dust bin abnormal installation Abnormal cliff sensor / dirty cliff sensor The robot is stuck The bumper is stuck The robot is suspended Please install the dust bin Please wipe the cliff sensors Please clean any obstacle around it Please check the front bumper Please put the robot back on the ground FAQs Problem Solution Unable to connect to WiFi WiFi is disabled, Reset the WiFi and try again. WiFi signal is poor, Make sure that the robot is in an area with good Wifi signal reception only powered on, long time press the devices spot cleaning button and recharge button and can enter smart network connection. Only 2.4G network is supported. Unable to install the App IOS 9.0, Android 5.0 and above systems, can download and use APP. Unable to charge If contact is poor, clean the contact areas of the charging dock and the robot. power is restored when the power indicator light turns on. If the charging dock is not receiving power, check that both ends of the power cable are properly connected. 12 FAQs Problem Difficult to recharge Poor cleaning ability The robot is jammed Noise during cleaning Pure suction power Solution There are too many obstacles near the charging dock. Move it to an open area. The robot is too far from the charging dock. Place it closer and retry. It is recommended to clean up the ground debris first. If there is a part missing to clean, the robot will automatically schedule to clean it. The robot will actively try various methods to get rid of jams. Or it is recommended to help manually. The main brush, side brush, or main wheels may be jammed. Turn off the robot and clean them. If the omnidirectional wheel is jammed, remove it for cleaning. The dust bin is full and needs emptying. The filter is blocked and needs cleaning. The main brush is jammed and needs cleaning. Let the filter foam to air dry. Information on disposal and recycling The symbol means that this product must be disposed of separately from normal household waste at the end of its useful life. Please note that it is your responsibility to dispose of electronic equipment at recycling centers to help conserve natural resources. 13 Product parameter Name and content of hazardous substances in the product Parts Name Circuit Metal Parts Plastic Casing Battery Other Parts This form is compiled in accordance with the regulations of S J/T 11364. Means that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirement specified in GB/T 26572. Means that the hazardous substance at least in a certain homogeneous material of the part exceeds the limit requirement of GB/T 26572. 14 15

SIZE:74.6X37.6MM Poy RARER:

AAR: TSH AS ARR 8 BE 28S: RR AF:

KEBEAS 2mm BEZEA SL 2mm 3A, FU, ROE. 4 M802) NALA. JR AB ANE Robot Vacuum Cleaner aS 6000080056 BFR a Enz aon ires SetOIRIA SIZE SIZE:74.6X37.6MM a mA RR i ii iBT eaeS 1 Ls PS |

Label location 789101

C5266091_X10_Ed.1 Guangdong Wangjia Intelligent Robot Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2AVYJ-V100 To Whom It May Concern, Date: 10/19/2022 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality No No No No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: JiaJia Jiao Date: 10/19/2022 Title:

1/1

Guangdong Wangjia Intelligent Robot Co., Ltd. Model difference statement Product Name: Robotic Vacuum Cleaner Model No.: V100, V106, V100 Pro, V100 Plus We (Guangdong Wangjia Intelligent Robot Co., Ltd., Room 301, The Fifth Building No.1 Junma Road, Humen Town 523900 Dongguan, Guangdong PEOPLES REPUBLIC OF CHINA) hereby state that all the models are the same circuit and module, except for the side brush fittings for the V106 that are different from other models, and the battery capacities for V100 Pro and V100 Plus that are different from other models. Signature:

Name: JiaJia Jiao Title:

Tel: 13590375575 Email: RD@wonjarobot.com Date: 10.19.2022

C5266091_X8_Ed.1 Letter of Authorization Company: Guangdong Wangjia Intelligent Robot Co., Ltd. Address: Room 301, The Fifth Building No.1 Junma Road, Humen Town 523900 Dongguan, Guangdong PEOPLES REPUBLIC OF CHINA Product Name: Robotic Vacuum Cleaner Model Number: V100, V106, V100 Pro, V100 Plus FCC Identifier: 2AVYJ-V100 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: JiaJia Jiao Date: 10/19/2022 Title:

Signature of applicant:

1/1