User Guide 3 Axis Gimbal Table of Contents Product Description Introduction Prepare the Drone Prepare the Controller Parts Name Drone Flight Mode The Status Indicator Light of Drone Return Home Automatically Optical Flow System Gimbal Camera Power Switch of the Drone Drone Battery Assemble & Disassemble the Propellers Controller Function&Situation of Controller Controller Joystick Mode Assemble Phone Holder M RC PRO App FPV Real Time Transmission Software Flight Surrounding Requirements of the Flight Pre-Flight Inspection The Operation of Drone Basic Flight Appendix Drone Specification Packing List Important Statement Safety Precautions 1 1 2 2 4 5 6 7 9 9 10 11 12 15 16 17 18 18 18 22 23 25 26 26 IMPORTANT: Check your license requirements with the FAA before you fly. https://www.faa.gov/uas/getting_started/register_drone/
Product Description Introduction SPEEDBIRD I63E is equipped with optical flow and GPS and is capable of hovering and flying steadily indoors and outdoors. It is equipped with automatic return home and easy-to-use intelligent flight, such as Orbit Flight, Follow-Me and Waypoint Flight. It can shoot 4K HD video with a high precision 3 axis anti-shake gimbal. The drone has functional buttons that can control various operations and settings of the drone and camera. The App will display real time HD images and flight information. Always put safety first when flying. Enjoy your ING SPEEDBIRD I63E. Prepare the Drone Disassemble the gimbal protection lock Pull out the protective cover of gimbal camera. Expand the Arms Carefully unfold the arms in the motion of the arrows below. Install Drones Battery Before installing the battery for flight, make certain it is fully charged.Press straight down and push into the drone,make sure the battery install correctly. Reminder: If the battery is not installed properly, it may cause the drone to fall down due to power failure.
-1-
B
[1]
[2]
[5]
[3]
[4]
[6]
[7]
[8]
-2-
[1]
[2]
[3]
[9]
OFF ON I63E User Guide
[4]
[5]
[6]
[7]
[8]
[10]
[11]
[1] Take picture/video
[2] Left joystick
[3] One key to unlock/
Lock
[4] Phone holder
[5] One key return home
[6] Right joystick
[7] Power switch
[8] Status display screen
[9] One key to take off/
landing
[10] Gimbal control hand wheel
[11] Short press for light control/
Long press for fast slow speed switch
[12]
[12] GPS Switch
-3-
Drone Flight Mode The following flight modes are available in I63E. GPS Mode In GPS mode, the drone achieves precise hovering by receiving GPS signals. If the GPS signal is weak, the drone will enter Fix-Altitude Mode or Optical Flow Position mode.(Please refer to the status bar for specific status in App.) When the GPS signal is weak, please land to safe place immediately avoiding any accidents. At the same time, please avoid flying in a weak GPS signal or a narrow space to avoid accidents. If you cannot receive the GPS signal or if the GPS is turned off, the drone will enter the Optical Flow Position mode Optical Flow Position Mode If you cannot receive the GPS signal or if the GPS is turned off, the drone will enter the Optical Flow Position mode. In this mode, the drone can hover stably by optical flow system. Optical Flow Position height is 3m. If you exceed this height, the drone will lose control.
-4-
I63E User Guide Status Indicator Lights on Drone Front indicator light Front indicator light Rear indicator light Status Indicator Light Definitions No. Indicator light status Meanings Front and rear indicator light flash yellow quickly. Front and rear indicator light flash yellow green red in turns. Front indicator light stays in red, the rear indicator light stays in yellow. Drone and controller have not connected. Drone is in the initialization detection state. No GPS signal. Front indicator light stays in red, the rear indicator light stays in green. Good GPS signal, available to enter into GPS mode. Front and rear light flash green quickly. Drone is in gyroscope calibration. Front and rear light flash yellow in turns. Drone is in geomagnetic horizontal calibration. The front and rear light flash green in turns. Drone is in geomagnetic vertical calibration. Front light stays red, the rear light flashes red slowly. Front light stays red, the rear light flashes red quickly. Front and rear light flash red once, stop about 1.5s. Front and rear light flash red twice, stop about 1.5s. Front and rear light flash red three times, stop about 1.5s. Front and rear light flash red four times, stop about 1.5s.
-5-
Drone is close to low battery, only 16% power left. Drone is in low battery, only 12% power left. Gyroscope has a malfunction. Barometer has a malfunction. Compass has a malfunction. GPS has a malfunction. 1 2 3 4 5 6 7 8 9 10 11 12 13 I63E is equipped with auto Return home function. It include One key to Return Home , Return Home in low battery power and Return Home in lost control signal. Under good GPS signal, I63E will automatic fly back to home position and land automatically once pressing Return Home key / Low battery and lost control signal condition. f c When this occurs all indicator lights change from yellow to green. One Key to Return Home To cancel return-home, press again and the drone will return to flight control mode. Return Home in Low Power When the Red indicator lights flash slowly, the Power icon in the controller shows and a continuous beeping sound is emitted; if the flight altitude is between 30 and 100 meters, the drone will return to the home point automatically. 2. When the Red indicator lights flash quickly, the Power icon in the controller shows and a continuous beeping sound is emitted; if the flight altitude or distance is greater than 15 meters , the drone will return to the home point automatically. Return Home Beyond Control Distance Notes on Return Home:
Please be aware that when the drone is in Return Home mode, it will fly straight to the home point and will not be able to avoid obstacles. altitude can be set 15~120m When the GPS signal is weak or not working, or has been interrupted for more than 6 seconds, the drone will not be able to return to the home point. It will descend slowly until landing, then it will lock.
-6-
I63E User Guide Optical Flow System The optical flow system is composed of optical flow lens modules. It is an image positioning system that locating the drone by optical flow images. It ensures the accurate positioning and safe flight of the drone. Optical flow lens Usage requirements of Optical Flow Positioning Please note, Optical Flow Positioning works when flying at altitude below 3 meters. Measurement accuracy to the Optical Flow System (OPS) is easily affected by light intensity and texture of the surface. If the OPS fails the drone will automatically switch to fixed altitude mode. Below is a list of conditions that can cause failure to the OPS:
1. Flying fast at low altitude (below 0.5 meters). 2. Flying over monochrome surfaces such as pure black, pure white, pure red etc. 3. Flying over surfaces with strong reflections. 4. Flying over water or transparent surfaces.
-7-
I63E User Guide 5. Flying over moving objects such as upside of clouds, swaying trees or grasses, etc. 6. Flying over surfaces with rapid light changes. 7. Flying over extremely dark surfaces (Lux<10) or extremely bright surfaces (Lux>10,000). 8. Flying over very smooth surfaces. 9. Flying over surfaces with significant repeated textures such as same color brick. 10. Surfaces that are angled over 30 degrees. For best results with OPS, maintain moderate drone flying speed without rapid changes. Recommended speeds:
Altitude Max speed 1 2
<5m/s
<8m/s OPS Check List & Requirements Insure the OPS lens is clear. The OPS is only effective in altitude less than 3 meters. The surface area must have sufficient light source and rich textured ground. In dim light conditions, turn on the Optical Flow Fill Light.
-8-
I63E User Guide Gimbal Camera Gimbal Description The 3-axis gimbal provides a stable platform for the camera insuring the camera can shoot clear images
drone handwheel or through APP camera interface. 0
-70 Please place drone on flat open ground for takeoff. Do not touch the gimbal after the power is turned on. The gimbal contains precision parts which may be easily damaged. Please handle with care. Please keep the gimbal clean and away from sand, rocks and similar contaminants to keep it moving smoothly. Avoid landing in rough areas to protect the gimbal. Do not add or attach anything to the gimbal. Unlock gimbal protection lock before flying and lock it to protect it when storing and carrying. Flying in heavy fog or clouds may cause condensation on the gimbal. Please dry lens with soft cloth suitable for cleaning camera lens. Drone Power Switch Long-press the power button for 3 seconds to turn the drone on or off. In the same time, the drone will have power-on sound and indicator light stays on. Long-press the power button for 3 seconds again, the drone will turn off and indicator light will turn off.
-9-
Drone Battery I63E User Guide Drone No. I63E Rated Voltage 11.4V Battery Capacity 3200mAh Charging USB to Type C charging cable Please charge the battery fully before using it. Be sure you use the officially supplied USB charging cable to charge. The charging time is about 5.5 hours. charging data. Recommend using 5V 2A-2.1A adapter to charge. Please charge the battery fully before using it. Be sure you use the officially supplied USB charging cable to charge. The charging time is about 70 minutes. 5V 2A Adapter
(Not included) PD Adapter
(Not included)
-10-
I63E User Guide Prevent explosions by not squeezing or short-circuiting the battery. Do not remove the power cord from drone to prevent battery from short-circuiting. Do not disassemble battery or place near high temperatures or heated areas such as fires or electric heating devices. Check the power cord, shell and other parts regularly. If any damage occurs, repair damage before using. Charger is meant for indoor use only. After each flight, the battery should be charged halfway and then stored until used again. For long term non-usage, it is recommended to use the battery complete and charge it once a month to prevent damage from overcharging. Assemble/disassemble the propellers Match corresponding propellers ( A with A and B with B), then turn screws clockwise to tighten them.
(as pic 1-2). Motor A Align holes in the bottom Align holes in the bottom Turn screwdriver counterclockwise to remove the 2 screws and propellers. (as pic.3-4). A
-11-
Drone will not fly if propellers are installed incorrectly. Handle propeller blades carefully to prevent scratches. To ensure optimal safety and performance, only use the official ING propeller blades. Controller Controller Functions Flight Mode Switch Use the button on the right side of the controller to control GPS and flight mode. The on controller screen displays the current flight mode GPS mode Fixed altitude mode Controller Display Screen Return Home icon Headless mode
(Non Drone head orientated) Drone battery Flying distance(m) Controller signal Controller battery Photo/Video Fast/Slow speed Flight height(m) GPS mode Joystick mode Satellites signal Gimbal Control Wheel Adjust the camera angle by moving the wheel on the drone to get a better photography experience. When the wheel is turned counterclockwise, the camera angle will be adjusted upward; when the wheel is moved clockwise, the camera angle will be moved downward. A B
-12-
A 90 B Photo/Video Mode Press the on the controller screen to take a photo and the will flash once. Press the on the controller screen for 3 seconds to take a video and the will flash slowly continuously. Hold the controller for "2 seconds" again to stop shooting video. I63E User Guide Notes: 4K HD photos and videos cannot be saved without a Micro Memory Card (Class 10-UHS-II). If the Micro Memory Card is inserted incorrectly, the drone won't be able to take photos or video. One-Key Takeoff/Landing After unlocking the I63E, press the button once and the drone will takeoff automatically and hover at an altitude of 1.5m. When the drone is hovering, hold the button and the drone will automatically land. Remark: During one-key take out progress, user can press joystick to cancel auto takeoff command lmmediately. One-Key Return to Home Press the button until a beep sound occurs, to turn Auto-Return Home on. The drone will return to the last saved home point. Press the button again to stop Auto-Return Home.
-13-
I63E User Guide Drone Low Battery Warning 1. During battery level drop to level 2,the indicator light on the drone will quickly flash red and the battery icon on the controller screen will show " " while playing a continuous beeping sound. If the drone is flying at an altitude higher than 30 meters or a distance further than 100 meters, it will automatically return to the last saved home point. 2. During battery level drop to level 2,the indicator light on the drone will quickly flash red and the battery icon on the controller screen will show " ", while playing a continuous beeping sound. If the drone is flying at an altitude higher than 15 meters or at a distance further than 15 meters, it will automatically return to the last saved home point. If the altitude is lower than 15 meters or the distance is less than 15 meters, the drone will land directly where it is flying. Pic. 1 Pic. 2 Controller Low Battery Warning When the controller battery is low, the " " icon will appear on the controller screen and it will play a continuous beep sound. When this occurs, replace the batteries. Signal Strength The" " icon displays signal strength and the higher the bars, the stronger the signal is and the lower the bars are, the weaker the signal is. If the " " icon regularly changes from weak to strong, that means the drone is signal matching. If the " " icon shows less than 2 or no bars at all:
1) The distance between the controller and the drone is too far for the signal to reach. 2)The drone battery icon has been empty after signal matching has happened.
-14-
Drone Communication Range Keep the drone in front of the controller and prevent any obstacles from appearing between them. I63E User Guide Best communication range Controller Joystick Mode Joystick mode Forward/
Backward Turn left/Right Throttle Throttle Left/Right side flying Turn left/Right Forward/
Backward Left/Right side flying Mode 1 Mode 2
(Default) Joystick Mode Switch 1. Press and hold the unlock button on the controller, then turn it on to activate signal matching mode. 2. Hold the " " button for 3 seconds and the controller will switch to the other mode. The current controller will be displayed on the screen with Mode 2 being the default mode. Reminder: Make sure the controller is in signal matching mode in order to switch modes, if not, mode switching will not occur.
-15-
I63E User Guide Assemble Phone Holder 1. Pull the phone holder up completely (Pic.1);
2. Rotate the phone holder up 30(Pic.2);
3. Rotate and fix support board in to place (Pic.3);
4. Move components up and down to adjust the size to fit your phone. (Pic.4). Pic. 1 Pic. 2 Pic. 3 Pic. 4
-16-
Scan Code To Download APP Search M RC PRO in the Apple App Store or scan the QR code to download and install it. For Android users, scan the QR code to download and install it. App Store MJXRC.NET Connection Instructions Go to the Settings App on your phone, then turn on the WiFi and connect to Drone4G_***** and wait for the word "Connected" to appear.Once connected, the App can be opened. Saving Photos and Videos Without a memory card, photos and videos will be saved to the album in the App. (These photos and videos will only have the quality that the phone provides) With a memory card installed, photos and videos will be saved to it. Photos and videos saved to the memory card can be downloaded to the App. Setting Wi-Fi Drone4G_*******
Connect WIFI
-17-
Flight Flight Requirements 1. Do not fly in bad weather, such as strong wind, snow, rain, fog, etc. 2. Choose an open place without tall buildings around to fly. Buildings that use a lot of steel bars will affect the work of the compass and block the GPS signal, causing poor positioning of the drone or even an inability to locate the drone. 3. When flying, keep the drone in sight, stay away from obstacles such as crowds, water, etc."
4. Do not fly in areas with high-voltage lines, communication base stations or controller towers, to avoid interference with the drone."
5. When flying at the place whose altitude is above 6000m, the performance of the drone battery and power system will decrease, and the flight performance will be affected correspondingly. Please fly with caution. 6. The drone cannot use GPS to fly in the north and south poles. Flight Restrictions and Special Area Restrictions According to the regulations of the International Civil Aviation Organization and Air Traffic Control regulations about airspace control and drone management of various countries, drones must fly in their For flight safety, the flight restriction function is turned on by default, including specified airspace. altitude and distance restrictions and special area flight restrictions, to help users fly the drone safely and legally. Pre-Flight Inspection 1. Check that the controller, controller battery and phone are all fully charged. 2. Check that the propellers have been installed correctly. 3. Check that the front and rear arms of the drone and propellers have been fully unfolded. 4. After turning the power on, check to see that the camera and gimbal are working. 5. Make sure the camera lens is clean. 6. Only use official or officially certified accessories. The use of unofficial accessories may damage the drone. Drone Operation Controller and Drone Signal Matching Press and hold the lock button and turn on the controller. Once it begins to beep, release the lock button. The signal strength icon will begin changing from weak to strong while the drone signal matches. Install the drone battery, press and hold the power button for 3 seconds to turn on the drone. The drone will play a power-on sound and the indicator light will then turn on. After signal matching, the drone will play a long beep sound and the signal icon will display the current signal strength after successfully signal matching.
-18-
I63E User Guide As long as the controller and drone have been successfully matched, there is no need to rematch the signal after each use unless you have matched with another controller and/or drone. When matching the signal, make sure no other controller or drones have been turned on nearby, this will interfere with signal matching. Gyroscope Calibration After successfully signal matching, place the drone horizontally on the ground. Push the left and right joysticks to the bottom left at the same time. The front and rear lights on the drone will flash quickly as the gyroscope begins to calibrate. Once the indicator lights stays on, calibration has been completed. During gyroscope calibration, the drone should be placed horizontally on the ground, otherwise flight performance will be affected. As the gyroscope has been calibrated before shipping, only recalibrate it if flight performance is poor. Geomagnetic Calibration Before unlocking the drone, move the left and right joysticks to the bottom right at the same time to start geomagnetic calibration.
-19-
Two Steps Of Geomagnetic Calibration Once horizontal calibration begins, the front and rear indicator lights will flash yellow. Place the drone as shown below and rotate it 3 times horizontally until the front and rear indicator lights turn green flashing. Once this happens, horizontal calibration will be complete. Place the drone as shown below, rotate it 3 times vertically, until the front and rear indicator lights (Red) stay on. Once this happens, vertical calibration will be complete. fields
-20-
I63E User Guide Unlock/Lock the Drone Unlock the Drone Press the lock button, once the motor starts, the drone will be unlocked. Lock the Drone Method 1: After the drone has landed, move the throttle to the bottom for 3 seconds to stop the motor and lock the drone. Method 2: The drone will lock automatically after 15 seconds of non-use. Emergency stop:
When the drone is flying at a distance/altitude within 5 meters, press the lock button for 3 seconds to stop it. This function is only for emergencies and should not be used during normal flight. Operate The Drone Controller Drone Up Controller Drone Turn right Turn left Down Backward Front Rear Front Left side flying Forward Rear Right side flying
-21-
I63E User Guide Basic Flight The Steps of Basic Flight 1. Place the drone on a flat and open space with the user facing the rear of the drone. 2. Turn on the controller and the drone. 3. Match the signal of the controller and drone, and complete the initialization of the drone. 4. Open the M RC PRO APP, connect the phone to the I63E, and enter into the camera interface. 5. Unlock the drone. 6. Slowly move the throttle stick up and the drone will take off smoothly. Use the left and right joysticks to control the drone. 7. Pull down the throttle stick to lower the drone. 8. After landing, pull the throttle stick to the lowest position and hold it for more than 3 seconds until the motor stops. 9. After stopping, turn off the drone and the controller. Tips 1. Perform a pre-flight inspection. 2. Select the appropriate gimbal camera angle. 3. Fly and take photo in a good weather without wind. 4. Perform a test flight to create a planned route and find a place to take a view of. 5. Push the joystick as smoothly as possible to ensure the drone flies smoothly. As flight safety is very important to you, those around you and the environment, please read the user guide carefully.
-22-
Appendix Drone Specification Drone Dimension Weight
(The Battery and Propellers Included) Maximum Ascent Speed Maximum Descent Speed Maximum Speed Flight Height Limitation Maximum Tilt Angle Maximum Rotational Angular Speed Operating Temperature Range GNSS Hovering Accuracy Range Frequency Gimbal Gimbal Type Gimbal Adjust Range Roll Servo Range Heading Servo Range Controller Frequency Max Transmission Distance Working Temperature Range Battery Working Current/Voltage APP Name Transmission System Real Time Transmission Delay Time APP/FPV Real Time Transmission I63E: about 612g Fold: 295*80*87mm (L*W*H) Unfold: 395*395*87mm (L*W*H) 120m(393.6 feet) Indoor: 0.3m Vertical 0.3m Horizontal Outdoor: 0.5m Vertical 1.5m Horizontal 0 to -70
(Manual Adjust in Transmitter)
-30
-30 to 30
(Auto) to 30
(Auto) 3m/s 2m/s 40km/h 35 45 /s 0 -40 GPS 2.4GHz 3 axis 2.4GHz 0 -40 AA*2 Not include 200mA@3V M RC PRO 5G WIFI (802.11.a/n) 720p@30fps 200-300ms Android4.4 or Higher
-23-
The System Version Requirements of the Phone iOS 9.0 or Higher Electronic Shutter Speed Camera Basic Information Image Sensor Lens ISO Range Maximum Photo Size Photo Shooting Mode Video Resolution Color Mode Maximum Video Stream Support File System Local Video Frame Rate Maximum Transmission Frame Rate Image Format Video Format SD Cards Not include Working Temperature Aircraft Battery Capacity Voltage Battery Type Power Weight Charger Input Charger Power Charging Time Charging Method Charging Temperature Range I63E User Guide 4K EIS 5G WIFI Camera 1/3 inch CMOS View Angle: approx.120 Aperture: f/2.0 Focal Length: 2.96mm Photo: 100-3200 (Auto) Video: 100-3200 (Auto) 1/30s-1/10000s 3840x2160 Single Shot 3840x2160 RGB Video 50Mbit Transmission 2Mbit FAT32 3840x2160@30FPS 1080P@60FPS 720P@30FPS JPEG MP4, Compressed Format H.264 Micro SD Maximum Support 128GB Capacity Expansion, CIass10--UHS-II 0 -40 I63E 3200mAh 11.4V Li-po 36.48Wh about 208g 5 -40 5V/2-2.1A 15V 3A (PD) 45W (Max) 330 minutes (5V 2A Adapter) 70 minutes (45W PD Adapter) USB to Type C Charging Cable PD Charging Cable
-24-
Packing List The full package contains the following items. I63E User Guide Drone *1 Controller *1 Propellers *4 Drone Battery *1 PD Charging Cable *1 USB to Type C Charging Cable *1 User Guide Quick Start Guide IMPORTANT INFORMATION Toll-free Customer Support: 888-737-9984 Hours of Operation: Monday-Friday E-mail support: ing.support@beaninformationlogistics.com 8:30AM 3:30PM PST (closed holidays) Support Safety & Handling Fire Hazard Warning Use of an AC Adapter / Charger wire other than the one supplied with this product may result in overheating the battery, damaging the product and potentially becoming a fire hazard. WiiRobot Co.,Ltd. is not responsible for any damages caused by use of an AC Adapter / Charger. Battery: The battery used in the drone is Lithium-Ion. Lithium-Ion batteries should be properly disposed of when damaged or disposed. Screen: Use only a neutral cleaning fluid or isopropyl alcohol on a clean non-abrasive cloth to clean screen of ING controller screen. Do NOT use any type of chemical solvent, acidic or alkaline solution as these may damage the screen. Never clean the screen when device is plugged in to the charger, and ensure device is in OFF position when cleaning. FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2021 WiiRobot Co.,Ltd. Printed in China
-25-
Screwdriver *1 Warranty card *1 User Guide *1 Quick Start Guide *1 3 Axis Gimbal 3 Axis Gimbal Important Statement n a e o t I63E User Guide The remote control drone is composed of metal, fiber, plastic, electronic components and other materials. Therefore, it is necessary to keep away from heat sources, avoid deformation or even damage due to high temperature. Discard the product at will, which may affect the environment. Please recycle it properly according to local laws and regulations.
-27-