Lydsto Sweeping and Mopping Robot R5 Instruction manual Tips Please read through this manual before using the product, and keep it properly. Table of contents Product introduction Install Direction for use Connect APP Daily maintenance Basic specication FAQ Trouble removal Safety information Product introduction Host On o button / Cleaning / Pause Short press to start cleaning / Pause Long press to turn on / o Recharge / Pause Short press to recharge / Pause Laser head impact sensor Laser ranging sensor Indicator light Blue: Normal working Red: Abnormal state or low battery Yellow breathing: Charging Product introduction Sensor and structure Buttons Laser sensor Surface cover Pull-back duct box Charge touch spot Bumper Drop o sensor Charge touch spot Universal wheel Side brush Battery cover Driving wheel Main brush Pull-back duct box Product introduction Dust collector bin Top cover Power Indicator light Signal transmitting area Charging pole plate Power Indicator light White light: Normal working, full charge Red light: Abnormity Extinguish: No power Suction inlet Product introduction Accessories list Dust collector bin1 Mop1 Disposable mop cloth5 Dust bag Water dust integrated box1 HEPA lter screen2 Left side brush2 Right side brush2 Cleaning brush1 Mop cloth support1 Install 1.Before starting the machine, please clean the scattered wires, hard objects, sharp objects (such as nails and glass) on the ground and remove the toppable, fragile, valuable and potentially dangerous objects. Avoid personal injury or property damage caused by machine entanglement, jamming, dragging or collision. 2If the product is used in the hanging environment, please set the guardrail to prevent the equipment from accidentally falling or pushing items to fall, causing personal or property damage. Reminder 1.During the rst cleaning process, it is recommended to follow the host throughout the whole process to help deal with some possible minor problems. After handling, the host can smoothly clean itself in the future cleaning. 2.If some areas do not need to be cleaned or may jam the host, you can set a restricted area in the mobile APP to prevent the host from entering the above areas. 3.Do not let the robot absorb hard or sharp objects (such as decoration waste, glass, nails, etc.), otherwise it may scratch the robot and the ground. Install 2.Place the dust collection treasure against the wall, and ensure that there are no obstacles within 0.5 meters on both sides and 1.5 meters in front. Please wrap the excess wire around the winding board and plug it in. Adjacent to wall 3.Before use, please rst put the host on the dust collection treasure to charge, full before use. 0 . 5 m 0 . 5 m 1.5m Note:
Sunlight will interfere with the return signal, which may cause the host to fail to return the dust collector bin. Ensure that the dust collector has more than 0.5 meters on both sides, and the power cord of the space more than 1.5 meters in front of the dust collector is hanging down to the ground, which may be dragged by the host to causing the dust collector bin to lose power. 4. Install side brush Let the left brush (L) and the right brush (R) correspond to the letters L and R on the bottom shell respectively. Press down and hear "click" to indicate that the installation is in place. Install 5.Start up and charging Long press the () button to start up, wait for the indicator light to be steady on, and charge the host with the dust collector. The language prompt "Charging" indicates successful charging. Note: The device cannot be started due to insucient power supply. Please place the host on the dust collector and the device will start up automatically. Charging Automatic mode: After cleaning, the master will automatically return to the dust collector to charge. Manual mode: In the paused state, press the () buttons to start the recharge or the phone APP to start the recharge Note: If the host does not nd the dust collector bin, it will automatically return to thestarting position. Please manually put the host back on the dust collector bin to charge. Direction for us Start up/o Long press () buttons for 3 seconds, indicator lights on, start up successful When machine stand by, long press () buttons for 3 seconds, indicator lights o, machine shutdown. Note: The main host cannot be turned o while charging. Cleaning / Pause After start up, short press () buttons on the main host, or control begin cleaning from mobile APP. Note:
Vacuum robot should not be used to clean liquid. If the battery is lower than 15%, the cleaning task cannot be performed. Please charge the battery rst and then continue the cleaning. When the battery is lower than 15% during the cleaning process, the device will automatically return to the dust collector bin for charging. Please tidy up all kinds of cables on the ground
(including the power cable of dust collection treasure) before cleaning to avoid electrical power failure, damage to articles or cables caused by dragging during cleaning. Direction for us Automatic cleaning After starting up, the machine will rst plan the cleaning path in the way of edge and then in the way of arch lling, orderly and ecient cleaning of the whole house. After cleaning, the device will automatically return to the dust collector bin to charge (the default cleaning mode of the machine). Area of completion Area to be cleaned Suction adjustment You can choose Quiet, Standard, Strong and MAX by using mobile APP. Water level adjustment You can choose High gear, Medium gear and Low gear (The default mode is Medium gear). Appointment cleaning The mobile phone APP can be used to set the scheduled cleaning time. The host will automatically start cleaning at the specied time. The mobile phone APP can be used to set the scheduled cleaning time. T he host will automatically start cleaning at the specied time. Connect APP Lydsto APP can be downloaded from Apple APP market or Google APP market. Or Scan the following QR code,Download and install Lydsto APP. The product has been connected to MIJIA. It can be controlled by MIJIA APP and interconnected with other products.Scan the QR code, download and install MIJIA APP. Users with MIJIA APP already installed will directly enter device connection page. Or search "MIJIA" in APP store, download and install MIJIA APP. Open the home page of MIJIA APP, click "+" at the top right, and add the device according to the method recommended by the APP. Note: The actual operation may be slightly dierent from the description above due to the upgrade and update of MIJIA APP.Please follow the current guide in MIJIA APP. Reset WIFI At the same time, long press () and () for 3 seconds, and the voice prompt "WIFI has been reset" is heard. The blue lights of the power button and recharge button ash, and the robot enters the waiting state for connection. After the connection is completed, the blue lights of the power button and recharge button are steady on. Tip: Only WIFI networks in the 2.4GHz band are support. Reset WIFI When turned on, press and hold the () and () simultane-
ously for 3 seconds. You will hear a voice prompt 'WiFi has been reset', and the 'power light' and 'recharge light' will ash blue. At this time, do not let go, continue to press and hold for 2 seconds. You will hear a voice prompt 'Enter Mijia distribution mode', and the device will enter Mijia distribution mode. You can use the Mijia APP for distribution operations. Daily maintenance Main brush (recommended cleaning once a week) 1. Turn the machine over and press the buckle on the main brush cover to take out the cover 2. Remove the main brush Side brush (recommended cleaning once a week) 1. Turn the machine over and pull out the edge brush vertically. 2. Remove tangled hair and dirt and reinstall it. 3. The left side brush (L) and the right side brush (R) correspond to the lettersL and R on the bottom shell, and press down to reinstall them. Note: It is recommended to replace the side brush every 3 months to ensure the cleaning eect. 3. Use a matching cleaning brush to remove dust from the main brush and the main brush cavity, and then remove entanglements from the main brush Daily maintenance Dust box and lter screen
(recommended to be cleaned after each cleaning) Clean the dust box
(recommended cleaning once a week) 1. Press the button at the back of the machine and take out the dust box 1After a long time of use, remove the lter mesh, HEPA lter. 2Remove the primary eect lter and put the dust box under the faucet to wash (HEPA lter can not be washed). 3After cleaning, dry the water, air lter and dust box, until thoroughly dry can be used 2. Press and hold the dust box switch to open the dust box and dump the garbage. HEPA lter Filter sponge Bracket Note:
Please wash, do not add any detergent. Do not use brush, ngers clean strainer. Mesh to dry for at least 24 hours, thoroughly dry. It is recommended to replace one set of lters every 3 months. Daily maintenance Use of water tank Do not use the mop function on the carpet. After the mop is completed, please empty the water tank and remove the rag in time. Add water Installing the water tank Assembly Installing mop Start mopping Daily maintenance Clean the laser detection sensor
(once a month is recommended) Clean the charging contact of the host
(once a month is recommended) Clean cli sensor (monthly cleaning is recommended) Clean the dust collector signal transmitting area and charging contact (once a month is recommended) Daily maintenance Dust bag replacement:
When the device indicates that the dust bag is full, replace the dust bag in time. Dust bags for wear and tear, can be purchased in the ocial designated channels. 1.Open the top cover 2.Lift up the dust bag 3Throw the dust bag into the trash can 4.Install a new dust bag 5.Cover the bucket Daily maintenance Clean the dust collector dust path and lter port If the dust collecting treasure has poor dust collecting eect after replacing the dust bag, it is recommended to unplug the power plug and reverse the device to check whether the dust channel is blocked by foreign matter. Please use a screwdriver to remove the transparent cover of the dust passage and clean out foreign bodies. Take out the dust bag to check whether there are foreign bodies at the lter port and clean the lter port. Position of screw5 Transparent cover of dust path Filter port Firmware updates Enter the rmware upgrade function through the mobile APP. After detecting the new rmware, guide the rmware upgrade according to the prompts. The rmware upgrade requires power 20%, it is recommended to upgrade the device on the dust collector. Battery Maintenance 1 The device has a built-in rechargeable lithium battery-
pack. In order to maintain the battery performance, please keep the host in the charging state during daily use to ensure the best performance of the battery without excessive power loss. 2 Please fully charge when you not used for a long time:
ensure that the machine is turned o before storage. 3 Charge the battery at least once every 3 months to avoid damage caused by overdischarge. 4 The power adapter must be used for charging. 5 Lithium battery with use with charge, full use. Basic specication Host Product model Specication YM-R5-B03YM-R5-W03 YM-R5-B01YM-R5-W01 Shape size 320X320X93mm Battery 4S1P 2600mAh lithium battery Dust collector bin Rated voltage Rated power Charging time Dust bag capacity Shape size Rated input Rated output Power 14.4V 45W 5H 3L Specication 336*227*165mm 110-120V~/220-240V~
19V 0.6A 900W FAQ Type of Problem The Solution The machine freezes/
cannot be turned on If the battery is low, place the device on the dust collector, align it with the contact point, and the device will start up automatically. If the ambient temperature is lower than 0 C, use it in an environment ranging from 0 C to 40 C. Please check whether the power plug of the device is properly connected and conrm that the power supply of the socket is normal. Failure to charge Bad contact, please clean the dirt on the charging contact point, or unplug the edge brush. The equipment is too far away from the dust collector, please put the host near the dust collector. Failure to recharge Shut down and restart. Abnormal behavior The main brush, side brush or wheel may have foreign body entanglement, please stop the machine after cleaning. Abnormal noise/dust collection when cleaning Dust box is full, please clean the dust box. The cleaning ability is reduced or ash is dropped Filter screen is blocked, please clean or replace. The main brush is entangled with foreign matter, please clean the main brush. Unable to connect to WIFI WIFI signal is not good, please ensure that the device is in good WIFI(2.4G band, 5G is not supported) signal coverage In the region. Please reset WIFI and download the latest mobile APP to try to connect again. Check if you entered the wrong password. Scheduled cleaning does not take eect If the power is insucient, the cleaning appointment will be started only when the remaining power is 15%. When the machine starts on the charging station, the remaining power should be 30%. Trouble removal Prompt tone The Solution Please reinstall the 2-in-1 tank and start again Cleaning will be triggered when the water tank is removed. Please reinstall the tank. Please start the device on the level ground Pick up the device, or the device is suspended in the air, please move the device to a at ground before starting. Please restart away from the restricted area Please move the machine to a non-restricted area before starting up. Please put the machine at on the ground before starting Tilt the machine, move the machine to a level ground before starting. If the location fails, re-create the diagram If map data is lost, plan the path again The machine is trapped Please move the main engine to open ground and restart. Please check the main wheel Main wheel is stuck or entangled. Please check the main wheel and clean the foreign matter. Please check the main brush Main brush stuck or wrapped, please check the main brush and clean foreign matter. Please check the edge brush If the edge brush is stuck or wrapped, please check the edge brush and clean the foreign matter. O the ground, please return to the ground to start Pick up the device, or the device is suspended in the air, please move the device to a at ground before starting. Please check the crash barrier If the collision sensor is stuck, please clean and maintain it. Safety information Restrictions on use Plastic bags are dangerous! Keep plastic bags out of the reach of infants and children to avoid suocation. This product is designed only for cleaning the oor in the home environment. Do not use it outdoors (such as open balcony), in places other than the oor (such as sofa), or in commercial or industrial environment. Do not use the product in hanging places (such as duplex oor, open balcony, top of home) without any protective rail. Do not use the product in the environment above 40 C, below 0 C or with any liquid and viscous substances on the ground Before use, please hang up the ground cable at home to avoid dragging the cable when the machine is operating. Put away the fragile articles and sundries (such as ower bottles and plastic bags) on the ground to prevent the machine from being blocked or hit during operation, causing damage to valuables. Do not let those who are physically, perceptually and intellectually decient or lacking of experience and common sense (including children) use the product without monitoring or guidance. Do not let children use the product as a toy. Do not put the main brush cleaning tool in a place accessible to children. Keep the hair, ngers and other parts of men or pets away from the suction inlet of the machine when the machine is operating. Do not use the product to clean any burning objects (such as cigarette ends that are not extinguished). Do not absorb hard or sharp objects (such as decoration wastes, glass and nails) with the machine. Do not handle the machine with the protective cover of the laser distance measuring sensor, the upper cover of the machine and the collision buer as the lifting hand. To clean and maintain the machine and the dust collection charging pile, you must turn o the machine, pull out the plug from thesocket and disconnect the power supply rst. Do not immerse the machine and the dust collection charging pile in water for cleaning or ush them with water. Do not wipe any part of the product with a damp cloth or any liquid. Do not use the oor mopping module on the carpet. Do not use it under direct sunlight. Use the product according to the instructions. Any loss and injury caused by improper use shall be borne by the user. Safety information Battery and charging Even if the product has been seriously damaged, it is strictly forbidden to burn the product, because the product battery may cause explosion. Do not use the batteries, chargers and dust collection charging piles of any third party. Do not disassemble, repair or ret the battery and dust collection charging pile without permission. Do not place the dust collection charging pile close to heat sources (such as radiator). Do not wipe or clean the dome of the dust collection charging pile with a damp cloth or wet hands. Do not discard used batteries at will. Before discarding the sweeping and mopping robot, the power supply must be disconnected and the batteries should be taken out of the sweeping and mopping robot for environmental protection. In order to avoid danger, any damaged power cord must be replaced by professionals from the manufacturer, its maintenance department or similar departments. If you need to transport the product, make sure that the machine is turned o and it is recommended to use the original package. Do not pour water into the device or immerse it in water. If it will be not used for a long time, fully charge the machine, turn it o and put in a cool and dry place. Charge the machineat least once every three months to avoid battery damage due to over discharge. Warn This appliance can be used by children aged from years and above and persons with reduced physical,sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. This appliance contains batteries that are only replaceable by skilled persons. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inter-
ference to radio or television reception, which can be determined by tuming the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is con-
nected.
- Consult the dealer or an experienced radio/ TV technician for help. Warning: Changes or modications to this unit not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in xed/mobilemincm exposure condition without restriction. Manufacturer: Guangdong Yimu Technology Co., Ltd. Website: www.lydsto.com Address: Room ,Building ,No.,Changdong Road,Changping Town,Dongguan, Guangdong,China