Shipping Compliance Manual Model: Button-type RF Remote Control Transmitter Manufacturer: Guangdong Yongze Intelligent Technology Co.,Ltd. Compliance Standard: FCC Document Purpose: Shipment & Customs Declaration I. FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.This device may not cause harmful interference. 2.This device must accept any interference received, including interference that may cause undesired operation. Warning (15.21): Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 1 2. Product Overview Product Name:RF Remote Control Transmitter Model: YZ11002-09YZ11002-09-T1YZ11002-09-T15YZ11002-15HC-PM09 HC-PM09-T1HC-PM09-T2HC-PM09-02HC-PM09-04HC-PM09-T5 HC-PM09-T8HC-PM09-T15HC-PM10HC-PM10-T1HC-PM10-T5HC-PM10-T8HC-PM10-T15 HC-PM05-T15HC-PM10-01,HC-PM10-02,HC-PM10-04,HC-PM10-08,HC-PM10-15 YZ11013-09,YZ11013-09-T1,YZ11013-09-T8,YZ11013-09-T15,YZ11014-09,YZ11014-09-T1,YZ11014-09-T8,YZ1 1014-09-T15,YZ11015-09,YZ11015-09-T1,YZ11015-09-T8,YZ11015-09-T15,YZ11016-09,YZ11016-09-T1,YZ110 16-09-T8,YZ11016-09-T15 Application: Sun rooms, pavilions, electric windows & doors, lifting systems Power Supply: CR2450 coin battery, 3.3VDC Features: Acrylic panel, mechanical keys, low standby power, desktop/wall-mounted 3.Technical Parameters Power Supply Operating Voltage Operating Current Standby Current RF Transmit Frequency RF Frequency Deviation RF Modulation RF Output Power RF Remote Protocol Operating Temperature Housing Color Dimensions CR2450 Button Cell 3.3 VDC
< 35 mA
< 1 A 433.92MHz / 868.35MHz / 915MHz 35 kHz FSK
< 10 dBm Custom (rolling code encryption)
-20 ~ +60 Black / White L132 W45 H9.5 mm 4.Button Instructions RF Frequency Switching Mode (433.92MHz / 868.35MHz / 915MHz switchable) Step 1: Enter frequency switching mode Press and hold U2 + Up button for 2 seconds until the center indicator stays lit. Step 2: Short press to select the target frequency Note: Wait for the indicator prompt to finish, then power off and power on again. 5. Installation & Usage Keep at least 0.3 m away from metal objects to avoid signal attenuation. Prevent static discharge, which may damage electronic components. 2 Avoid extrusion, impact or dropping. Protect from water and moisture. 6. Packaging Packaging Type Quantity per carton Carton Size 7. Troubleshooting EPE Foam Tray 200 PCS 455 455 350 mm No power response Check if battery insulation tab has been removed Failed to code / pair Verify frequency and protocol match between transmitter and motor/receiver Poor remote sensitivity Check battery age; replace battery if used over 1 year 3
