FCC ID: 2AKAR-AMRFID NFC Module

Guangdong ZK Radio Electronic Tech Co., Ltd APPROVAL SHEET Doc. No. 202011040002 Customer Name: AKUVOX (XIAMEN) NETWORKS CO., LTD Material Code R03050002403 Product Name AM-SMRTCP-RFID Supplier Guangdong ZK RFID Electronic Technology Co.,Ltd Specification: AM-SMRTCP-RFID IC Module 39*19mm Test Date: Quantity Editor Software Hardware Testing Project Supplier Engineer Engineer Engineer Manager Confirmed Tested by Checked by Approved by Customer Confirmed Contact QQ:3002957370 Phone15813398220 Mailboxchenhongni@zkrfid.com AddressRoom 1004, 10th Floor, Block B, Building 3, Tiananyungu, Xuegang North Road, company address1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang,Shenzhen,China phone call0755-29062099 Factory addressFloor 4, Building A, Zhongjin Industrial Park, No.3 South Pusha Road, Shahu Village, Tangxia Town, Dongguan city Website Address www.zkradio.com Guangdong ZK Radio Electronic Tech Co., Ltd Bantian Street, Longgang District, Shenzhen, China Remarks IIntroduction IIApplication Non-Touched Radio Frequency IC Card Reader Module AM-SMRTCP-RFID AM-SMRTCP-RFID is the reader module specialized for non-touched radio frequency IC card with operating frequency 13.56MHZ.The reader module for non-touched smart card was developed based on ISO/IEC14443 international standard protocol.It uses high integration card reading chips,which NXP OM966302HN product.It has these advantages of high integration, strong anti- interference ability, small volume, better stable performance, also with high receptio n sensitivity, low operation electricity, single DC power supply, low price, high performance and other characteristics. This specification is applied to the requirements for access control attendance, file management, electronic ticket, product anti-counterfeiting, public traffic card system, etc. IIITechnical Parameters Model ISO Cards Support OperatingFrequency AM-SMRTCP-RFID ISO/IEC 14443A Card/NTAG S50 Card/FM11RF08 Card/FM1208 Card/DESfire EV1 Card

/FeliCa Card /15693 Card 13.56MHz Card/Ultralight Card/S70 Baud Rate 9600 bit/s by default The machine voltage communication interface Electricity DC 24V UART8N1 Standby electricity less electricity is less than 90mA is than 90mA, and swipe Operating Temperature and Hunidity Range

-107020%80%

Storage Temperature and Hunidity Range-2080 Conditions 20%80%

company address1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang,Shenzhen,China phone call0755-29062099 Factory addressFloor 4, Building A, Zhongjin Industrial Park, No.3 South Pusha Road, Shahu Village, Tangxia Town, Dongguan city Website Address www.zkradio.com Module size Swipe Distance Firmware Version Hardware Version Guangdong ZK Radio Electronic Tech Co., Ltd 39mm*19mm(deviation1mm) S50 Card 0~5cm,S70 Card 0~5cm,Ultralight Card:0~2cm,FM11RF08 Card:0~1.5cm,NTAG Card:0~4cm,FM1208 EV1 15693 Card:0~5cm Remark Card:0~0.8cm, 0~L(LLmm)(The actual distance depends on the type of cards and the application environment V1.11 V1.00 Card:0~4cm,DESfire IVOutline drawing and Pin Definition RemarkOutline drawing actually has the UL mark company address1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang,Shenzhen,China phone call0755-29062099 Factory addressFloor 4, Building A, Zhongjin Industrial Park, No.3 South Pusha Road, Shahu Village, Tangxia Town, Dongguan city Website Address www.zkradio.com Guangdong ZK Radio Electronic Tech Co., Ltd P1 is 7 pin connectorsits pitch is 2.54mm p1-1 p1-2 p1-3 p1-4 p1-5 p1-6 p1-7 ANT TVSS NC NC GND RX TX GND 3.3V NC NC P2 is 4 pin connectorsits pitch is 2.54mm company address1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang,Shenzhen,China phone call0755-29062099 Factory addressFloor 4, Building A, Zhongjin Industrial Park, No.3 South Pusha Road, Shahu Village, Tangxia Town, Dongguan city Website Address www.zkradio.com Guangdong ZK Radio Electronic Tech Co., Ltd VPictures of Real Products Pic 1Front View of Module Pic 2Reversed View of Module VIPackage 1.Past the beauty grain adhesive on pearl cotton and fix the labeled product above the beauty grain adhesive,pack them with the way of 4*6 pieces of cotton (refer to Pic 1). 2.Put the pearl cotton into the packing box and pack it in 4 cotton/box (refer to Pic 2). Pic 1 company address1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang,Shenzhen,China phone call0755-29062099 Factory addressFloor 4, Building A, Zhongjin Industrial Park, No.3 South Pusha Road, Shahu Village, Tangxia Town, Dongguan city Website Address www.zkradio.com Guangdong ZK Radio Electronic Tech Co., Ltd Pic 2 company address1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang,Shenzhen,China phone call0755-29062099 Factory addressFloor 4, Building A, Zhongjin Industrial Park, No.3 South Pusha Road, Shahu Village, Tangxia Town, Dongguan city Website Address www.zkradio.com Guangdong ZK Radio Electronic Tech Co., Ltd VIIContact Information If Any Technical Matters Name: Tel:18681498379 QQ:2853815392 Name: Tel:13066865845 QQ:3005371972 company address1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang,Shenzhen,China phone call0755-29062099 Factory addressFloor 4, Building A, Zhongjin Industrial Park, No.3 South Pusha Road, Shahu Village, Tangxia Town, Dongguan city Website Address www.zkradio.com Guangdong ZK Radio Electronic Tech Co., Ltd FCC Warning Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules FCC Part 15.225 2.3 Specific operational use conditions This transmitter/module and its antenna(s) must not be co-located or operating in conjunction with any trans mitter. This information also extends to the host manufacturers instruction manual. 2.4 Limited module procedures The mode of active polling is adopted in the module, and the RF field is intermittently switched on and off. The open duration of the RF field is about 92.8ms, and the close duration is about 1.6ms.After the RF field is opened, the module will identify the electronic tag in the field. The electronic tags conforming to relevant communication protocols are communicated. After anti-collision screening of the electronic tags in the field, the UID of the selected electronic tag will be read. 2.5 Trace antenna designs

(The circuit is wired to form a coil, and the capacitor resistance forms a resonant circuit) company address1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang,Shenzhen,China phone call0755-29062099 Factory addressFloor 4, Building A, Zhongjin Industrial Park, No.3 South Pusha Road, Shahu Village, Tangxia Town, Dongguan city Website Address www.zkradio.com Guangdong ZK Radio Electronic Tech Co., Ltd company address1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang,Shenzhen,China phone call0755-29062099 Factory addressFloor 4, Building A, Zhongjin Industrial Park, No.3 South Pusha Road, Shahu Village, Tangxia Town, Dongguan city Website Address www.zkradio.com Guangdong ZK Radio Electronic Tech Co., Ltd This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This compliance to FCC radiation exposure limits for an uncontrolled environment, and minimum of 20cm separation The host product manufacturer would provide the above information to end users in their end-product manuals. 2.6 RF exposure considerations between antenna and body. 2.7 Antennas Coil antenna; 0dBi; 13.56MHz 2.8 Label and compliance information The end product must carry a physical label or shall use e-labeling followed KDB784748D01 and KDB 784748 stating Transmitter Module FCC ID: 2AKAR-AMSMRTCP. 2.9 Information on test modes and additional testing requirements For more information on testing, please contact the manufacturer. company address1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang,Shenzhen,China phone call0755-29062099 Factory addressFloor 4, Building A, Zhongjin Industrial Park, No.3 South Pusha Road, Shahu Village, Tangxia Town, Dongguan city Website Address www.zkradio.com Guangdong ZK Radio Electronic Tech Co., Ltd 2.10 Additional testing, Part 15 Subpart B disclaimer The modular transmitter is only FCC authorized for the specific rule parts (FCC Part 15.225) listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed when contains digital circuity. The host is mutual inductive to the electronic tag (card) through the antenna, module, and reads the information inside the electronic tag (such as card number), and then communicates with the host computer through the serial port to achieve the purpose of controlling other electronic equipment.

(OEM) Integrator has to assure compliance of the entire end -product incl. the integrated RF Module. For 15 B

(15.107 and if applicable 15.109) compliance, the host manufacturer is required to show compliance with 15 while the module is installed and operating. Furthermore the module should be transmitting and the evaluation should confirm that the module's intentional emissions (15C) are compliant (fundamental / out-of-band). Finally the integrator has to apply the appropriate equipment authorization (e.g. Verification) for the new host device per definition in 15.101. Integrator is reminded to assure that these installation instructions will not be made available to the end-user of the final host device.

"This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and

(2)this device must accept any interference received, including interference t hat may cause undesired operation."

the host device.

"Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment."

The Integrator will be responsible to satisfy SAR/ RF Exposure requirements, when the module integrated into company address1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang,Shenzhen,China phone call0755-29062099 Factory addressFloor 4, Building A, Zhongjin Industrial Park, No.3 South Pusha Road, Shahu Village, Tangxia Town, Dongguan city Website Address www.zkradio.com 2.11. User manual FCC Statements Guangdong ZK Radio Electronic Tech Co., Ltd NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help IC Statements device. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the Lmetteur/rcepteur exempt de licencecontenudans le prsentappareilestconforme aux CNR dInnovation, Sciences et Dveloppementconomique Canada applicables aux appa reils radio exempts de licence. Lexploitationestautorise aux deux conditions suivantes :

(1) L' appareil ne doit pas produire de brouillage;

(2) L' appareildoit accepter tout brouillageradiolectriquesubi, mmesi le brouillageest susceptible d'

encompromettre le fonctionnement. company address1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang,Shenzhen,China phone call0755-29062099 Factory addressFloor 4, Building A, Zhongjin Industrial Park, No.3 South Pusha Road, Shahu Village, Tangxia Town, Dongguan city Website Address www.zkradio.com Guangdong ZK Radio Electronic Tech Co., Ltd This radio transmitter [IC: 26721-AMSMRTCP] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Antenna Type Manufacturer Model Gain Frequency Range Coil Antenna Guangdong ZK Radio Electronic Tech Co., Ltd

0dBi 13.56 MHz FCC ID: 2AKAR-AMSMRTCP IC: 26721-AMSMRTCP Host name: Reader Main engine product model: IP-SMRTCP/2P/RFID SpecificationThe silicone/white company address1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang,Shenzhen,China phone call0755-29062099 Factory addressFloor 4, Building A, Zhongjin Industrial Park, No.3 South Pusha Road, Shahu Village, Tangxia Town, Dongguan city Website Address www.zkradio.com

1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang, Shenzhen, China Guangdong ZK Radio Electronic Tech Co., Ltd Agent Authorization Company: Guangdong ZK Radio Electronic Tech Co., Ltd Address: 1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang, Shenzhen, China Product Name: Module Model Number(s): AM-SMRTCP-RFID Product Description: NFC Module We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: Jan. 04, 2021 Signature:

Name:

lixue lan Title:

General Manager Company: Guangdong ZK Radio Electronic Tech Co., Ltd

Guangdong ZK Radio Electronic Tech Co., Ltd 1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang, Shenzhen, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jan. 04, 2021 Subject; Request for Confidentiality FCC ID: 2AKAR-AMRFID To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market.

&] Schematic Diagram

& Block Diagram

&] Operational Description Parts List Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos CL] Internal Photos User Manual C] For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 DO1. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, a wh A Signature: ean! ce\

- : 4 \

Name: lixuelan' > Y< 7 et. Title: GenerafManager, >>

1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang, Shenzhen, China Guangdong ZK Radio Electronic Tech Co., Ltd RE FCC ID: 2AKAR-AMRFID To the certification reviewer:

We are hereby applying for [Limited] modular approval of the above-referenced FCC ID, based on compliance with [all] of the criteria as detailed below. Sincerely,

[lixue lan]

[General Manager]

Part 15 Unlicensed Limited Modular Transmitter Approval Justification per 15.212 Requirement per 15.212 reference Comply

(Y/N)

(i)

(ii) radio elements of The transmitter must have shielding. the modular their own RF The modular transmitter must have buffered modulation/data inputs (if such inputs are provided.

(iii) The modular transmitter must have its own power supply regulation. transmission

(iv) The modular transmitter must comply with the antenna and system requirements of 15.203, 15.204(b) and 15.204(c). The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with Part 15 parameters.

(v) of be capable

(vi) The modular transmitter must be equipped with either a permanently affixed label or must electronically displaying its FCC identification number. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. The module has been installed in the host device and does not have its own shielding case for Limited Modular Approval, please see exhibition external photos. All modulation and data inputs are buffered by circuitry on the transmitter chip. Power supply regulation is provided by circuitry on the transmitter chip. The antenna is fixed. The module was tested in the host device because this is limited modular approval with the mentioned equipment. The modular was labeled with its own FCC ID. The outside of device in to which the module is installed will be labeled FCC ID: 2AKAR-

AMRFID, Please refers to User Manual. N Y Y Y N N 1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang, Shenzhen, China Guangdong ZK Radio Electronic Tech Co., Ltd or rules specific

(vii) The modular transmitter must comply with any operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization.

(viii) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. The modular is comply with all applicable FCC rules. Any modifications, not expressly approved by the manufacturer could void the authority to operate in these regions. This module operates under Part 15 .247 which is exempt from RF exposure evaluation owing to the very low operating power. Y Y