JA-310R 88X100MM 128G Product Specification Button Introduction Display Screen & Rear Panel Port Introduction Remote Control Panel Product Name Product Model Voltage Bluetooth Version Bluetooth Protocol Support Bluetooth Receiving Distance CD Player JA-310R DC 5V/1A 5.1 ADP/AVRCP 10M Power 2.2W; Standby Power: 0.8W (auto shutdown when no operation) USB Port USB card reader (supports up to 32G) Playable Formats CD-DA/MP3(CDR-RW/USB) Audio Output 3.5mm Stereo Headphone Output Ports Optical Output Type-C Charging Cable Length 80CM JA-310R CD Player User's Manual Ver1.0 Product Dimensions 132.515728mm CD Tray Cover (can stay open) Pause/Play (long press: display switch) Product Weight 310g Product Accessories TYPE-C charging cable1, Remote control1, User manual1 LCD Display Screen Pickup Laser Head Next Track (long press: fast forward) Short press: mode switch MODE (play order mode): Long press for Bluetooth pairing Long press: power on/off Previous Track (long press: fast rewind) Rotate: volume control Stop Remote Control Receiver Display Screen Rear Panel Ports Track Number (max display: 99) Playback Time (minutes) Playback Time (seconds) BT (Bluetooth icon) RAND (Random Play) Repeat Play Icon Single Track Repeat All Tracks Repeat Optical Output Port Audio Output Port (Stereo) USB Port 22 22 Power Port (TYPE-C) 5V/1A Power (On/Off) Bluetooth Fast Rewind( ) Previous Track( ) Next Track( ) Fast Forward( ) Pause/Play Repeat CD/USB Switch Mode Stop Volume -
Volume +
Follow us!Thinkya [email protected] 1 2 3 4 CD Playback Bluetooth Playback Connection Methods USB Playback FCC Warning 1.For first-time use: Ensure the power is connected, then open the cover and remove the 1. Set the device to be paired (Bluetooth speaker, Bluetooth headphones, etc.) to Bluetooth pickup protection paper. search mode. 2.Insert a CD disc. If the display shows "NO", press the VOL/POWER button on the panel or 2. With the unit powered on, long-press the MODE button on the panel to set the unit to the CD/USB button on the remote control to switch to CD mode for playback. The cover BT pairing mode. can remain open during playback; however, its recommended to close it to prevent dust 3. After entering pairing mode, the "BT" icon on the display will flash. from entering. 4. Wait a moment; once pairing is successful, the "BT" icon on the display will stop flashing. Wired Connection Wireless Connection Optical Port 3.5mm Audio Jack Optical Cable 3.5mm audio cable Bluetooth version 5.1 with an unobstructed transmission distance of 10 meters. 1. Insert the USB drive into the USB port on the back of the device. 2. Press the VOL/POWER button on the panel or the CD/USB button on the remote control to switch to USB mode for playback. 3.During playback, do not force the CD to stop spinning (this may cause damage); use the stop button instead. 4.To remove the CD disc: First stop the CD from spinning, then take it out through the slot at the top-right of the device (as shown in the diagram).
*When not in use, close the cover to avoid dust accumulation. Bluetooth Bluetooth supports paired devices When playing via Bluetooth/USB, press the MODE button on the panel or the Repeat button on the remote control to set the repeat playback order as shown below:
Sequential Playback Single Track Repeat All Tracks Repeat Random Play Optical cable 3.5mm audio cable Bluetooth connects Bluetooth speaker Power amplifier Bluetooth headphones Portable speaker Headphones Speakers
* Do not store non-audio files on the USB drive.
* Supported audio formats (MP3/WMA/WAV).
* Unplug the USB drive before turning off the device's power.
* When there are multiple folders on the USB drive, playback will follow the folder creation time order.
* Folders with Chinese names may cause playback errors; please use English names or numbers as much as possible.
*Please choose one connection method. Inserting both optical cable and audio
* Maximum supported USB storage capacity: 32G. cable at the same time may cause sound quality degradation. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 5 6 7 8 9
