Where to get the app:
Please search "scent marketing" in Google play or App store and you will find it. Aroma diffuser A301C Name:
AAA Label:
AAAAAA AAA AAA AAA AAAA AAAA AAAA Concentration and Consumption consume(ml/h) Working & Stop time Grade A301-1000ML Working(s) Stop(s) 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.28 1.36 1.44 1.52 1.60 1.68 1.76 1.84 1.92 2.00 Note:
1. Above date is base on testing oil in laboratory. 2.Above data is for reference only. The consumption of different oil may be different. Specification
: A301C-V1.0
: 148*148*473mm
: 1000ml
: 3.1kg
: 400m / 1200m
: 5W
: DC12V 2 3
! Warning 1.Please keep the machine vertical. Tilt or lie flatly may cause oil over flow. The machine efficiency may be affected. 2.Shall not modify, disassemble or repair the machine if you are not a technician. If any failure happens to the machine, please contact our technical personnel. Oil bottle Adaptor Manual Bluetooth module Equipment cleaning The machine needs to be cleaned when below situation happen:
1. You're about to change to another kind of essential oil. 2. The atomized head volume becomes weak. Cleaning steps 1. Pull out the atomized head, loose the bottle. 2. Fill moderate alcohol into the bottle and install, then turn on the machine and work for 5 minutes. 3. Airing the atomized head and the bottle. Installation ApplicationHotel, conference hall, lobby, bar, SPA, etc. Key Lockhole DC connector Atomized head Oil bottle 1.Unlock the machine 2.Take out the Atomized head with bottle. 3.Unscrew the oil bottle. 4.Adding the oil. 5.Install the bottle with atomized head, and lock the machine. Breakdown Does not diffuse Solution
-Check whether the mode you choose is correct or not.
-Check if the machine is during "Non-Working period"
-Air pump may be damaged, change a new one.
-Check whether the tube is loose or not Low diffuse
-The atomizing core is blocked, clean by alcohol or change a new component.
-Check whether the gasket is damange/loose or not.
-Check whether the tube is loose or not Oil spill
-Check whether the bottle is loose or not
-The gasket in the atomized head is damaged or loose. Oil sprinkle
-The atomized head is damaged, change a new one
-The machine is tilled or lie down, keep the machine vertical. Abnormal noise
-The air pump is loose, retighten the pump
-The air pump is damaged, change a new one. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.