Introduction Key Functions Power On / Off Connecting via Bluetooth GamesSir M2 is an Apple MFi certified Bluetooth gaming Menu Button Pair Button controller for iOS devices including iPhone, iPad, iPad, iPod, Apple TV, and Mac. GamesSir M2 provides the professional level of control that A/X/Y/B
=> Pair Button LED indicator
) GameSir
{ brings gamers to the next level of mobile gaming. ' !
| * Specifies :
1 1 1 1
. t Product Gamesir MFi Modal Games i ' '
MFi Bluetooth Controller M2 \ Name | Bluetooth Controller 1 ' '
User Manual iPhone/iPod/iPad/ Working | secu gsc 1 Working Mac/Apple TV with | Temperature \ \
' Platforms iOS 7 or later, ! ' P. Switch '
Working 5 : ower Swi or Mac OS v10.6 or later Humidity 20~80% D-Pad Right Joystick 7 ! Left Joystick ! 1 Working ME Connection Bluetooth 1 qb cap 1 Mode Types ' ' ON OFF '
' ' Built-In Bracket ' '
Made for 7 Charging Charging ' ' '
. = - ' ' 3.7v~5.0v . 1~2H ! ) Cc) ' '
BiPod (iPhone LJiPad ge) Mac |@appletv| | Voltage Time : :
' Ch ~ Worki ! : Power on: Slide the Power Switch to ON to turn on the : Hold down the pair button for 2s, then all LEDs will blink, It
' arging 1A~2A Orsing A ' RI Ul ' controller. ' indicates that the controller is searching for the signal of your i i ; ' i PProx.7m ' wy ay ' : ; g re] y Made for: iPhone / iPod / iPad / Mac / Apple TV Current Distance a A | Power off: Slide the Power Switch to OFF to tum off the 1 device to pair with. Requirement: iOS 7 or later, Mac OS v10.6 or later i " i R2 2. | controller. 1
: SIT Box | 191*130"87mm Baitery 800mAh ' ' :
7 Size Capacity i 1 1 1 1 1 '
1 1 1 '
1 Gamepad oe Gross 1 1 1 1 Size 155*102*65.5mm Weight 265g 1 1 1
1 1 1 1 1 | 2 H 3 4 } 5 1 1 1 1 Connecting to Your Devices Bluetooth On Go to Settings > Bluetooth and turn on the Bluetooth on your iOS device. Wait ill GameSir-M2 is shown on the devices list, then click GameSir-M2 to connect. Connected, Sleep & Auto-Reconnect Power Indicators Connected: LED1 is light on while other is off Sleep Mode: Enter sleep status without any actions for 10mins Reconnect: While in sleep mode, hold down MENU button for 2s to wake up and reconnect your device. Clear Pairings & Connecting to New Devices Clear Pairing: Before connecting the controller to other devices, please clear the previous paired device by holding down the Pair Button + MENU at the same time for 5s. Connect to New Devices: After clear the previous paring, follow the step of connecting devices for the first time. Power Indicators Battery Level O 225%
O 250%
O 275%
= 100%
by b7
/ . _) The Lightning Port Low battery warning: When the battery remains less than 10%, LED1 will blink when the controller is power on. Charging your M2: Connect M2 via your lightning cable to power.When charging your M2, LED1-LED4 will blink in turns. After being full charged, all power indicators will stay on. GameSir World 4, Download on the
@ App Store Discover a thousand of MFi game recommendations on Gamesir World App Website: www.gamesir.hk Facebook: facebook.com/mygamesir Twitter: twitter.com/mygamesir Download GameSir World APP FCC Caution 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Changes or modification warning. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the user is en-
couraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. 10