EM-9005M operating manual schematic diagram line in Line in socket Load cell 3 AAA1.5V The earmuffs are powered by two no. 3 (AAA) 1.5V batteries, which need to be installed before use. set up method 1 Press down to pop up the battery box;
2
+-Take out the battery box and install three batteries correctly according to the direction or polarity of the battery mark in the battery box, with + as positive pole and - as negative pole;
3 Press down to install the battery box. Note:
if the headset is not used for a long time, take out the battery to prevent deterioration or danger of the battery!
bluetooth function 3 power on pairing connected
, MFB Hold down the "on/off" button for 3 seconds (s); you may hear "Power on" and
"pairing" tones (s), with the indicator blinking red and blue alternately. Then connect the device and bluetooth of your mobile phone, the headset makes a
"Connected" tone, indicating that bluetooth is connected. Click the FM key to pause and play music, answer and hang up the phone; Double click on the FM key to replay the tail number, three strikes to call the voice assistant. Clockwise rotation of the FM key is the next track of music, counterclockwise rotation of the FM key is the previous track of music. Turn the switch button clockwise to increase the volume of Bluetooth, and turn the switch button counterclockwise to reduce the volume of Bluetooth. In bluetooth connection state, hold down the MFB key for three seconds to force the pairing state. FM FM mode FM FM FM FM FM FM MFB MFB During the first power-on, the Bluetooth function is enabled first, and then the MODE key is pressed to enter the FM mode. Click the FM key to enter the FM automatic channel search mode. When all the stations are searched, the automatic channel search stops by itself. You can also click the FM key to pause the channel search. Clockwise rotation of the FM key is the next FM station, counterclockwise rotation of the FM key is the FM station's previous channel. Rotate the switch button clockwise to increase the volume of FM radio, rotate the switch button counterclockwise to reduce the volume of FM radio. AM AM mode FM AM AM AM AM AM AM MFB MFB During the first power-on, the Bluetooth function is enabled first. Then, press the Mode button to enter the FM mode, and then press the mode button to enter the AM mode. Click the FM button to enter the AM automatic channel search mode. When all stations are searched, the automatic channel search stops. You can also click the FM button to pause the channel search. Clockwise rotation of the FM key is the next AM station, and counterclockwise rotation of the FM key is the previous channel of the AM station. Rotate the switch button clockwise to increase the volume of AM radio, rotate the switch button counterclockwise to reduce the volume of AM radio. LINE IN LINE IN mode Line in line in line inline in Line in has the highest priority. No matter what state it is in, when you insert Line in, you will play Line in first. Line in can play music without battery. FCC warning:
This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.