FCC ID: 2A7U7-S-2802 Karaoke machine

CONTROL PANEL REMOTE CONTROL 2 4 5 13 14 15 1 3 6 7 8 9 10 11 12 1. LED digital display. 2. MODE: Source Switching Button.

(1) Display"USB": the U disk mode; Default boot mode.

(2) Display" Bluetooth": the Bluetooth mode.

(3) Display "80. 9": the radio mode.

(4) Display"L": the external audio mode.

" "USB/TF/FM mode: Press this button to return to the last song or channel;

Press and hold it for more than 3 seconds to decrease the volume of USB/TF/FM.

" "USB/TF/FM mode: Press this button to play/pause;

FM mode: Press and hold it for more than 3 seconds to automatically search for stations. Bluetooth mode: Press and hold it for more than 3 seconds to start TWS function;

TWS: Bluetooth Synchronization-Two or more devices with TWS function and the same Bluetooth name succeed in Bluetooth connection; when "Bluetooth"

on the screen stops flashing;

" " USB/TF/FM mode: Press this button go to the next or the next channel, Press this button for more than 3 seconds to increase USB/TF/FM volume.

"MIC PRI ": Microphone priority:

Press this button to turn ON/OFF the microphone priority function, Press and hold this button for more than 3 seconds to select single loop or random play.

"REC" Recording function-Turn on the MIC, insert the storage disk(USB/TF card),start recording the voice from the MIC, saved in a newly created Mp3 file in USB/TF card. 3. USB/TF card port 4. AUX output 10. Microphone volume controller 11. AC charging socket 5. AUX input 6. Music volume controller 7. Music treble controller 8. Music bass controller 12. Wired microphoe input or guitar input 13. LED Ligth switch 14. Power switch 15. DC 12V power input terminal block 9. Microphone ECHO controller 1 1 10 10 5 5 30 30 30 30 Remote control Remote control To use the remote control, keep it within 4 meters of the machine at an angle of up to 60 degrees. POWER SHUTDOWN MODE STOP STOP Press this button to pause. Press to activate the standbymode when the POWER switch Press to on the control panel is in the ON position. Press to skip or return, or select the station under FM mode Press to lower/raise the volume

(Repeat)

(Repeat) Press this button to play one as a loop or play all. MUTE Numbers Press to mute and press again to resume. Select the music on the USB or TF card. Press to select the equalizer mode. Press to start playing/pause.Under FM mode : press to tune by 0.1 MHz. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. 3.Choose the Bluetooth name ABRATO on your device and connect. USER MANUAL Abrato Contents of package The following materials are included Speaker 1 Remote control 2 Wireless microphone 1 Instruction Manual 1 Cable DC 12V 1 Wired microphone 1 Cable AC 1 IPAD stand IMPORTANT NOTE 1. Under Bluetooth mode, the source will be matched and connected to the speakerautomatically if they have been ever connected via Bluetooth once. Do remember to remove the previous connected source if the new one is to be added. 2. What should you do if there is no sound coming from the speaker after being connected to the source?

Firstly, please check the volume of the speaker or the source if it is off. Secondly, please restart the speaker or the source. 3. The USB or TF card can only be inserted into USB/TF slot; do not push it too hard, or it could be damaged. 4. USB/TF card should be formatted by FAT32; it will be better to use those storage volume below 32GB. 5. MP3 file is the defaulted format accepted by the speaker. 6. Turn off the speaker before removing the USB/TF card, or it could be damaged. 7. The USB mode wont be working if there is no USB or TF card inserted into the corresponding slot of the speaker. Meanwhile, only one device at a time, USB or TF card. 8. To maintain the inside rechargeable battery in a good condition, strongly recommend to charge the speaker every 3 months if to leave it being unused for a long time. Recommend to read this manual in advance

Guangzhou Junhao Electronics Co., Ltd. Agent Authorization Company:Guangzhou Junhao Electronics Co., Ltd. Address:4th FL, Workshop C-1, Building No.1, No.18 Xinhua RD, Xinzhuang Village, Shiling Town, Huadu Dist, Guangzhou Product Name:Karaoke machine Model Number(s):S-2802,TY-1200,M-1003,S-601,M-001,M-002,M-003,S-001, S-002,S-003,M-2601 Product Description:Karaoke machine We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Cheng Chao Title:

MANAGER Company: Guangzhou Junhao Electronics Co., Ltd. Date: July 12, 2022

Guangzhou Junhao Electronics Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A7U7-S-2802 Date: July 12. 2022 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. Guangzhou Junhao Electronics Co., Ltd. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name:

Cheng Chao Title:

MANAGER Company: Guangzhou Junhao Electronics Co., Ltd. Date:

July 6, 2022

Model difference declaration letter Differences Description We Guangzhou Junhao Electronics Co., Ltd. state:

Product Karaoke machine Model Name S-2802,TY-1200,M-1003,S-601,M-001,M-002, M-003,S-001,S-002,S-003,M-2601 The above product with same circuit, PCB layout, electrical parts, materials and wiring the materials of decorative accessories is same, only structures, Appearance shape, different color. Signatory Date: 07-12-2022 Signature:

Name:

Cheng Chao Title:

MANAGER Company: Guangzhou Junhao Electronics Co., Ltd. Date:

July 12, 2022