FCC ID: 2BFE9-GY-RC01 Remote control

Remote Control Function Description No. 0 1 2 3 4 5 6 7 8 9 10 11 12 Function Description Press any button,the indicator light will turn red. Press the button to schedule for 1 hour. On/Off button. Maximum brightness of 100%,long press or tap the button to adjust the brightness. Indicator light Timer ON/OFF Brightness increase Color temperature decreaseYellow light,long press or tap the button to adjust the Neutral light Color temperature rise Brightness decrease brightness. Natural Light. White light,long press or tap the button to adjust the brightness. Minimum brightness of 5%,long press or tap the button to adjust the brightness. Tap the button to change light,Yellow light-Natural Light-

White light. Tap the button to night light scenario. Tap the button to feeding scenario. Tap the button to office scenario. Tap the button to reading scenario. Color temperature range Night light mode Feeding mode Office mode Reading mode 1.2AAA batteries were installed in the remote,and ensure that the light bulb is powered on and light up. 2.Using the remote control to operate towards the light bulb. 3.If the remote can not control the bulb, please try to reconnect remote to the bulb as following step:

After the bulb turn on,long press the remotes on/off button within 3 seconds until the bulb flashes FCC Warning Statement: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver. IC Warning This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This device complies with Canadian ICES-003 and RSS-210. Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. IC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Avertissement IC Cet appareil est conforme aux normes RSS sans licence d'Industrie Canada. L'opration est soumise aux deux conditions

- Connect the equipment into an outlet on a circuit different from that to suivantes: (1) cet appareil ne doit pas causer dinterfrences, et (2) cet appareil doit accepter toute interfrence, y compris which the receiver is connected. celle susceptible de provoquer un fonctionnement indsirable de l'appareil.

- Consult the dealer or an experienced radio/TV technician for help. dispositif. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Selon la rglementation d Industrie Canada, cet metteur radio ne peut fonctionner qu en utilisant une antenne type et gain maximum (ou infrieur) approuvs pour Industrie Canada par l'metteur. Rduire brouillage radiolectrique potentiel avec dautres utilisateurs, le type dantenne et son gain doivent tre choisis que la puissance isotrope rayonne quivalente

(e.i.r.p.) nest pas suprieure celle ncessaire pour communication russie. Cet appareil est conforme aux normes canadiennes ICES-003 et RSS-210. Exposition aux radiations: Cet quipement est conforme la rglementation canadienne sur les radiations. limites d'exposition tablies pour un environnement non contrl. Dclaration d'exposition aux radiations IC L'appareil a t valu pour rpondre aux exigences gnrales d'exposition aux RF. L'appareil peut tre utilis sans restriction dans des conditions d'exposition portables.

Label and label location FCC ID LABEL:

High:1cm Remote control FCC ID:2BFE9-GY-RC01 Wide:2cm Label Location:

Guangzhou Kakanuo Technology Co., Ltd. Section 2.911(d)(5)(i) Certification Equipment Type Company name: Guangzhou Kakanuo Technology Co., Ltd. Address:101, Building 3, No. 1126 North Panyu Avenue, Dalong Street, Panyu District, Guangzhou, China Product Name:Remote control FCC ID:2BFE9-GY-RC01 Model(s):GY-RC01 2.911(d)(5)(i) Equipment Type We, [Guangzhou Kakanuo Technology Co., Ltd.] (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name: David Wu Date: 2024.3.15 Title and Company name:Manager /Guangzhou Kakanuo Technology Co., Ltd. NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Guangzhou Kakanuo Technology Co., Ltd. Section 2.911(d)(5)(ii) Certification Applicant (Covered List) Company name: Guangzhou Kakanuo Technology Co., Ltd. Address:101, Building 3, No. 1126 North Panyu Avenue, Dalong Street, Panyu District, Guangzhou, China Product Name:Remote control FCC ID:2BFE9-GY-RC01 Model(s):GY-RC01 2.911(d)(5)(ii) Applicant filing We, [Guangzhou Kakanuo Technology Co., Ltd.] (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: David Wu Date: 2024.3.15 Title and Company name:Manager /Guangzhou Kakanuo Technology Co., Ltd. NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.3

Guangzhou Kakanuo Technology Co., Ltd. Section 2.911(d)(7) USA Agent for Service of Process Company name: Guangzhou Kakanuo Technology Co., Ltd. Address:101, Building 3, No. 1126 North Panyu Avenue, Dalong Street, Panyu District, Guangzhou, China Product Name:Remote control FCC ID:2BFE9-GY-RC01 Model(s):GY-RC01 2.911(d)(7) USA Designated Agent for Service of Process We, [Guangzhou Kakanuo Technology Co., Ltd.] (the applicant) designate [Stone

] NOTE1 for the purpose of accepting service of process on behalf of Trading Limited the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Stone Trading Limited USA Address: 6547 N Academy Blvd

#2266,Colorado Springs,CO 80918,United States FRN Number0033401936 Contact Name:Dongmei Fang Telephone No:+12134573118 Email:compliance@c-shlink.com Applicant Company name:Guangzhou Kakanuo Technology Co., Ltd. Address:101, Building 3, No. 1126 North Panyu Avenue, Dalong Street, Panyu District, Guangzhou, China Grantee FRN Number:0035116904 FCC Grantee Code:2BFE9 Contact Name:David Wu Telephone No:18824920376 Email:weihongwu2@163.com Signature:

Title:manager 2.911 (d)(7)USA Agent v1.5 Guangzhou Kakanuo Technology Co., Ltd. Signature:

Title:Manager Date: 2024.3.15 Date:2024.3.15 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.5

Guangzhou Kakanuo Technology Co., Ltd. Agent Authorization Company:Guangzhou Kakanuo Technology Co., Ltd. Address:101, Building 3, No. 1126 North Panyu Avenue, Dalong Street, Panyu District, Guangzhou, China Product Name:Remote control Model Number(s):GY-RC01 Product Description:Remote control We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Title:

Company: Guangzhou Kakanuo Technology Co., Ltd. David Wu Manager Date: 2024.3.15

Guangzhou Kakanuo Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2BFE9-GY-RC01 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Date: 2024.3.15 These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: David Wu Title:Manager