FCC ID: 2BCDQ-MSF103 Mousse Smart Pet Feeder-Camera

USER MANUAL Mousse Smart Pet Feeder Thank you for being with me CONTENTS IN THE BOX PRODUCT OVERVIEW VIDEO GUIDANCE OPERATION OVERVIEW CLEAN AND CARE SPECIFICATIONS SAFETY GUIDELINES TROUBLESHOOTING WARRANTY Mousse Smart Pet Feeder 01 02 03 04 09 10 11 13 15 IN THE BOX Mousse Smart Pet Feeder Desiccant Bag Desiccant Bag x1 Power Adaptor x1 User Manual x1 Smart Pet Feeder x1 01 PRODUCT OVERVIEW Mousse Smart Pet Feeder Lid Desiccant Box Tank Partition Food Tank Lid Open Button Transparent Window Tank Detach Button (on both sides) Left Compartment Feeding Button Grain Distribution Machenism Right Compartment Feeding Button Feeder Base Battery Module Battery Cover Food Outlet Stainless Steel Bowl Bowl Holder 02 VIDEO GUIDANCE Mousse Smart Pet Feeder Please check our Youtube Channel for video guidance:

https://youtube.com/@meoof-pet 03 OPERATION GUIDE | Set Up the Feeder Mousse Smart Pet Feeder Power Supply Connection Open the host base battery cover, plug power cable into the Type-C port or insert the battery module.

You can choose to use external power supply or the battery module according to personal needs, or use both at the same time. It is recommended to use external power supply when configuring the network. Set Up the Grain Distribution Mechanism 1. Confirm that the tank partition has been removed, align the grain distribution mechanism with the unlocking position " " and rotate it to the locking position " ". 2. 3. Rotate the silicone gel of the grain distribution mechanism to ensure that the "HERE" sign is aligned with the positioning arrows. Install the grain tank partition back.

Before disassembling or assembling the grain distribution mechanism, please always remove the tank partition first. Set Up the Feeder Base and Food Bowl 1. 2. Place the feeder base on a level surface. Align the food tank with the feeder base and press down until you hear a clicking sound. 3.

Place the stainless steel bowl into the bowl holder and attach the bowl holder to the notch on the base until you hear a clicking sound. Make sure that there is no grain in the food tank before set up. 04 OPERATION GUIDE | Add Pet Food Mousse Smart Pet Feeder Desiccant Bag 1. Open the Lid 2. Place the Lid 3. Put in Desiccant Pinch the lid open button with two fingers and lift it upwards. When adding food, the lid can be hung on the food tank. Open the desiccant box, put the desiccant evenly inside, then close the desiccant box. Max Line (on Tank Partition) Max Line (on Food Tank) 4. Place the Tank Partition a. b. c.

Depending on the usage needs, choose to use the whole tank (suitable for feeding a single type of dry pet food) or insert the tank partition to create dual compartments (suitable for feeding two types of dry pet food). Add dry pet food (do not exceed the Max Line). Close the lid. Recommended kibble size: <18mm/0.72 inch in diameter. 05 OPERATION GUIDE | Buttons Overview Mousse Smart Pet Feeder L Button R Button Reset Button Manual Feeding L Buttonleft compartment feeding R Buttonright compartment feeding

* Make sure there is food in the tank.

* Cat food: 1 portion is about 10g (tested with cat food of 7mm diameter).

* Dog food: 1 portion is about 7g (tested with dog food of 15mm diameter).

* Different shapes of food may various slightly in weight. Child Lock Function The "child lock function" can be activated/

deactivated within the App. Press both L and R buttons for 3 seconds can activate/deactivate this function. If there is no operation for 30 seconds, this function will be automatically activated. Reset Button To reset the feeder, press the Reset Button on the back of the feeder base for 5 seconds until you hear a beep sound. The feeder will be reset to factory settings and ready for re-connection. 06 OPERATION GUIDE | Indicators Overview Mousse Smart Pet Feeder Power Supply Mode Battery Supply Mode WiFi Indicator WiFi Indicator Slow flash: Feeder is ready to connect to WiFi Fast flash: Feeder is connecting to WiFi/

Feeder is offline/

Feeder is upgrading the firmware Stay solid: Connected to WiFi Battery Indicator On: Battery full Breath: Charging Off: No battery inside Abnormal Indicator Flash: Abnormal Off: Normal Slow flash: Feeder is ready to connect to WiFi Fast flash: Feeder is connecting to WiFi/

Feeder is offline/

Feeder is upgrading the firmware On for 30s : Connected to WiFi/

Waked up from sleep mode Off: Feeder is in sleep mode Battery Indicator White flash: Battery sufficient Red flash: Battery low Abnormal Indicator Flash: Abnormal Off: Normal Red Charging Green Fully charged 07 OPERATION GUIDE | App Mousse Smart Pet Feeder 1. Install the App Search "meoof" in App Store or Google Play to download the App. iOS Android 2. Log in App Following the instruction in the App, sign up and log into your account. 3. Use the App You can set up the feeding plan, the feeder will feed accordingly and keep feeding record as well as the eating record in the App. When in Power Supply Mode, the feeder will keep all eating record. When in Battery Supply Mode, the feeder will only keep eating record within 2min (if any) after feeding.

Note: The feeder supports 2.4GHz WiFi. Keep the feeder close to your router for better WiFi connection. The ideal range is within 6 meters/19.7 feet without obstacles and walls. It is recommended to use 2.4GHz WiFi connection when the distance is far or there are obstacles and walls. 08 CLEAN AND CARE Mousse Smart Pet Feeder 1. Place the feeder on a level surface, press both tank detach keys and lift up the food tank. Then remove the food bowl. 2.

Use a wet tissue to wipe and clean the feeder base. The feeder base must not be soaked or submerged in water. 3. Open the lid and remove the desiccant bag. 4. Pull out the tank partition. 5. Rotate and take out the grain distribution mechanism. Pull out the rotary cap, separate the baffle plate and the turntable. Also disassemble the silicone of turntable. 6. Clean the components one by one. It is recommended to add an appropriate amount of detergent and rinse thoroughly. 7.

After cleaning, leave them to air-dry, then reinstall them one by one. The feeder base must not be soaked or submerged in water. 09 Rotary Cap Baffle Plate Turntable Shell SPECIFICATIONS Mousse Smart Pet Feeder Name Model Materials Mousse Smart Pet Feeder MSF101 ABS,304 Stainless Steel,Silica Gel Rated Input 5V 1A Product Dimensions Package Dimensions 34*21*36.5cm/ 13.4*8.3*14.4in 23.5*22.5*45.3cm/ 9.3*8.9*17.8in Net Weight (w/o battery) Gross Weight (w/o battery) Product Capacity 2.5kg/ 5.5lbs 3kg/ 6.6lbs 5.5L 10 SAFETY GUIDELINES Mousse Smart Pet Feeder Dispose of all packaging materials properly. Some items may be packed in plastic bags; these bags could cause suffocation; keep away from children and pets. Do NOT allow small children to play with, in or around the pet feeder. To reduce the risk of injury, please keep close supervi-sion when the appliance is used near children. Do NOT use the feeder with pets not able to reach the food tray or with any physical disability. Do NOT immerse the base part in water at any time as it may damage electronic components like the control panel. Do NOT place any foreign object in the pet feeder. Do NOT use outdoors. Check operation frequently to be sure the unit is dispensing properly. Do NOT use wet, canned or moist food. Do NOT disassemble the unit other than as instructed in this User Guide. Do NOT use the feeder for anything other than its intended use. Only use attachments recommended or sold by the manufacturer. The use of attachments not recommend-ed or sold by the manufacturer may cause an unsafe condition.Do not modify the pet feeder. Do not operate any appliance if the unit is malfunctioning or has been damaged. Do not attempt repairs on the pet feeder yourself. Contact our customer service immediately for further instructions. Always unplug when not in use and before cleaning. Never pull on the electrical power cord to remove the plug from the wall outlet. If the plug of this device gets wet, turn off electricity to that wall outlet. Do not attempt to unplug. Examine the feeder after installation. Do not plug in if there is water on the power cord or plug. To avoid tripping, always position power cord out of the way of foot traffic. 11 NOTE Mousse Smart Pet Feeder FCC Warning Statement: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated for operating in conjunction with any other antenna or transmitter. 12 TROUBLESHOOTING Mousse Smart Pet Feeder Problem Solution Can't connect the feeder to WiFi. 1 Keep the feeder and phone close to your router, make sure the network signal is good. It is ideal to make the distance within 6 meters/ 19.7 ft without obstacles and walls. 2 Plug the power cord, reset or restart the feeder and try again. 3 Try other adding method following the App instructions. I press the buttons but they don't response. Press and hold both L and R buttons for 3s to unlock the buttons. The food won't come out. 1 Please make sure there is food in the tank, and food size within The portion amount is not the same. Pet has eaten but there is no eating record in App. 2-18mm/ 0.08-0.7in in diameter. 2 Check if the food tank or grain distribution mahcenism is blocked. 3 Check if the anti-clog detector at the food oulet is dirty and blocked. 4 Check if the power adapter is connected or if the battery level is . sufficient After about 3 feedings, it should be almost even. 1 Check if the eating detection feature is turned On in the App. 2 If the eating time is too short (less than 15s) or too long (more than 2min), algorithm will filter the record. If the time gap between two meals is too small (less than 2min), the algorithm will filter the record. If the pet's range of motion (while eating) is too slight, the radar may not detect it. 3 4 5 There could be an gap of up to 2min between eating finish and eating report is shown in App. 13 Mousse Smart Pet Feeder Problem Problem Solution Solution Pet has not eaten but there is an eating record in App. Battery life does not last long enough. Check if pet or human is around the feeder and cause the radar to misjudge. Check if other living being (rat etc.) has shown up around the feeder and cause the radar to misjudge. Please check if:

1 The feeding plan is heavier than everage. 2 The App is opened too often (more than 3 times/day). 3 Network stability is poor, which will cause the feeder extra power for frequent reconnection. 4 There is food block issue, which will cause the feeder extra power for adjustment. 5 The battery is fully charged. 14 WARRANTY Mousse Smart Pet Feeder 1-year warranty

*Lifetime support

*For guidance on product use and warranty extension, please contact us via email: support@meoof.com 15

Guangzhou Miao Culture Technology Co., Ltd. Section 2.911(d)(5)(i) Certification Equipment Type Company name: Guangzhou Miao Culture Technology Co., Ltd. Address:Room 225, Building 2, No.188 Kaitai Avenue, Huangpu District, Guangzhou Guangzhou China 510000 Product Name:Mousse Smart Pet Feeder-Camera FCC ID: 2BCDQ-MSF103 Model(s):MSF103, MSF104, MSF105, MSF106 2.911(d)(5)(i) Equipment Type We, Guangzhou Miao Culture Technology Co., Ltd. (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name:Robin Liang Date:2023.12.11 Title and Company name:N/A/Guangzhou Miao Culture Technology Co., Ltd. NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Guangzhou Miao Culture Technology Co., Ltd. Section 2.911(d)(5)(ii) Certification Applicant (Covered List) Company name: Guangzhou Miao Culture Technology Co., Ltd. Address:Room 225, Building 2, No.188 Kaitai Avenue, Huangpu District, Guangzhou Guangzhou China 510000 Product Name:Mousse Smart Pet Feeder-Camera FCC ID: 2BCDQ-MSF103 Model(s):MSF103, MSF104, MSF105, MSF106 2.911(d)(5)(ii) Applicant filing We, Guangzhou Miao Culture Technology Co., Ltd. (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name:Robin Liang Date:2023.12.11 Title and Company name:N/A/Guangzhou Miao Culture Technology Co., Ltd. NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.3

Guangzhou Miao Culture Technology Co., Ltd. Section 2.911(d)(7) USA Agent for Service of Process Company name: Guangzhou Miao Culture Technology Co., Ltd. Address:Room 225, Building 2, No.188 Kaitai Avenue, Huangpu District, Guangzhou Guangzhou China 510000 Product Name:Mousse Smart Pet Feeder-Camera FCC ID: 2BCDQ-MSF103 Model(s):MSF103, MSF104, MSF105, MSF106 2.911(d)(7) USA Designated Agent for Service of Process We, [Guangzhou Miao Culture Technology Co., Ltd.] (the applicant) designate

[Stone Trading Limited] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Stone Trading Limited USA Address: 6547 N Academy Blvd

#2266, Colorado Springs, CO 80918, United States FRN Number: 0033401936 Contact Name: Dongmei Fang Telephone No: +12134573118 Email: compliance@c-shlink.com Applicant Company name:Guangzhou Miao Culture Technology Co., Ltd. Address:Room 225, Building 2, No.188 Kaitai Avenue, Huangpu District, Guangzhou Guangzhou China 510000 Grantee FRN Number:0034086116 FCC Grantee Code: 2BCDQ Contact Name:Robin Liang Telephone No:13922196150 Email:robin.liang@meoof.com 2.911 (d)(7)USA Agent v1.5 Guangzhou Miao Culture Technology Co., Ltd. Signature:

Title: Manager Date:2023.12.11 Signature:

Title: N/A Date: 2023.12.11 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.5

Guangzhou Miao Culture Technology Co., Ltd. Agent Authorization Company:Guangzhou Miao Culture Technology Co., Ltd. Address:Room 225, Building 2, No.188 Kaitai Avenue, Huangpu District, Guangzhou Guangzhou China 510000 Product Name:Mousse Smart Pet Feeder-Camera Model Number(s):MSF103, MSF104, MSF105, MSF106 Product Description:Mousse Smart Pet Feeder-Camera We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Robin Liang Title:

N/A Date: 2023.12.11 Company: Guangzhou Miao Culture Technology Co., Ltd.

Guangzhou Miao Culture Technology Co., Ltd. Model Difference Product description: Mousse Smart Pet Feeder-Camera Model name: MSF103 MSF104, MSF105, MSF106 Trade Name: N/A All the model are the same circuit and RF module, only the model name is different. Regards Sincerely Clients signature:

Clients name / title : Robin Liang/N/A Contact information / address: Room 225, No.188 Kaitai Avenue, Huangpu District, Guangzhou, 510000

Guangzhou Miao Culture Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2BCDQ-MSF103 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Date: 2023.12.11 These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Robin Liang Title:N/A