FCC ID: 2A8JV-P44S Thermal Label Printer

FCC Warning Statement: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated for operating in conjunction with any other antenna or transmitter.

C5266091_X24_Ed.1 Attestation Statements TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules covered telecommunications equipment and video surveillance equipment produced by entities identified on the Commissions Covered List1, which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) that prohibit equipment authorization for Applicant Company name: Guangzhou Munbyn Information Technology Co, Ltd. Grantee code: 2A8JV FCC ID: 2A8JV-P44S Contact Name: Eddie Zhou Address: 329 3rd Floor,Tairong Business Center,No.63 Xizeng Road, Liwan District,Guangzhou Telephone No: 18136659593 Fax No: 18136659593 Email: eddie@beeprt.com i. ii.

[Guangzhou Munbyn Information Technology Co, Ltd.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification.

[Guangzhou Munbyn Information Technology Co, Ltd.] (the applicant) certifies that, as of the date of the filing of the application, the applicant [is identified on the Covered List as an entity producing covered not]

equipment. The applicant must sign this certification. Date: 2023/02/28 Applicants Name: Eddie Zhou Title:Manager Signature 1 The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist 1/1

< Guangzhou Munbyn Information Technology Co, Ltd. >

C5266091_X10_Ed.1 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID:2A8JV-P44S To Whom It May Concern, Date: 2023-02-23 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality No No No No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Eddie Zhou Title: N/A 1/1

Guangzhou Munbyn Information Technology Co, Ltd. Model Difference Product description: Thermal Label Printer Model name: P44S P44A, P44S-3, P44S-403, P44S-406, P44A-403, P44A-406, P44S-402, P44A-402 Trade Name: N/A FCC ID:2A8JV-P44S All the model are the same circuit and RF module, only for model name. Regards Sincerely Clients signature:

Clients name / title :Eddie Zhou (N/A) Contact information / address: 329 3rd Floor,Tairong Business Center,No.63 Xizeng Road, Liwan District,Guangzhou

C5266091_X8_Ed.1 Letter of Authorization

<Guangzhou Munbyn Information Technology Co, Ltd. >

Company:Guangzhou Munbyn Information Technology Co, Ltd. Address:329 3rd Floor,Tairong Business Center,No.63 Xizeng Road, Liwan District,Guangzhou Product Name: Thermal Label Printer Model Number: P44S P44A, P44S-3, P44S-403, P44S-406, P44A-403, P44A-406, P44S-402, P44A-402 FCC Identifier:2A8JV-P44S We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. is allowed to forward all Name: Eddie Zhou Date: 2023-02-23 Title: N/A Signature of applicant:

1/1

US Agent for Service of Process LETTER OF ATTESTATION C566091_X23_Ed1 TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process:

Company Name: GSS SERVICE INC FRN: 0033402082 Contact Name:

Address: 6547 N Academy Blvd #226 Colorado Springs Co 80918 USA Telephone Email: michouxlogan@outlook.com Ms wichouo Logan 001-949-2990192 This letter is to confirm that the US Agent for Service of Process accepts responsibility to act as a local representative on behalf of (Guangzhou Munbyn Information Technology Co, Ltd.). The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. Applicant:

Company name: Guangzhou Munbyn Information Technology Co, Ltd. Thermal Label Printer Product Description:

Grantee code:

FCC ID:

Contact Name:

Address:

District,Guangzhou Telephone No:

2A8JV 2A8JV-P44S Eddie Zhou 329 18136659593 Email:

eddie@beeprt.com 3rd Floor,Tairong Business Center,No.63 Xizeng Road, Liwan The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. This Agreement is valid until (2024/04/02). Date: 2023/02/28 Applicants Name: Eddie Zhou Title: Manager Signature US Agent for Service of Processs Name: GSS SERVICE INC Title: Manager Signature 1/1

C5266091_X13_Ed.1 Guangzhou Munbyn Information Technology Co, Ltd. FCC Software Configuration Control Declaration Date: 2023-02-23 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Product/ Model Number:Thermal Label Printer/P44S Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Signature of applicant Name:Eddie Zhou Title: N/A 1/1