FCC ID: 2AWHG-RM-T1 Portable Battery Speaker

MODO VOL-

VOL+

CARGA USB TF DC 5V AUX ON OFF ACCESORIOS 1.Cable Cargador Usb 1 Pieza 2.Manual De Usuario 1 Pieza INSTRUCCIONES DEL PANEL DE CONTROL MODO VOL-

VOL+

CARGA 1 2 3 4 5 6 7 8 9 10 1.USB Port 2.TF Card 3.DC interface 4.AUX input 5.ON OFF button 6.Signal input button 7.Previous/VOL-(Hold for 3 seconds to decrease volume) 8.PLAY/PUASE into automatic scan) 9.Next/VOL+(Hold for 3 seconds to increase volume) 10. RED = Charging GREEN = Fully charged LED CHARGE STATUS:

(In FM mode,hold for 3 seconds the device will enter RM-T1 FM Operation In FM mode, press the signal input button on the front panel control to enter FM, and press PREVIOUS or NEXT button on the front panel or the remote control to choose station; long press PLAY/PAUSE button on the front panel control to search stations automatically. Bluetooth:

Press MODO button on panel or the bluetooth button control to select Bluetooth mode. Simultaneously open the Bluetooth setting on your phone, tablet or any other bluetooth enabled audio device and select

"RM-T1"(no need to match code),the unit and device will then connected via Bluetooth. Press the "next song" and "previous song"

button on the remote control to select the song, press" play/pause"

button to control the playing status. POWER SOURCE POWER SOURCE 1.Please charge the unit at least 4 hours before first time using. 2.Long press the MODO button on the panel to switch on or off the speaker. CHARGE THE BATTERY When the battery is charging, the CHARGE STATUS lights red. After the battery has fully charged, the light turns to be green. 1.Connect the AC adaptor to the DC IN JACK of the speaker firmly, and plug it into a wall outlet. 2.When the battery is fully charged, first disconnect the AC adaptor from the speaker,then from the wall outlet. 3.The speaker works normally when charging. SIGNAL INPUT BUTTON Press MODO button on the front panel to select the mode(AUX,USB,TF, BT OR FM). PREVIOUS/NEXT BUTTON By pressing PREVIOUS/NEXT button on the front panel ,you can select a specific song from the play list. PAUSE/PLAY BUTTON To stop playing the current track,please press PAUSE/PLAY button on the front panel. Press it once again to continue playing. AUX IN JACK 1.Connect an audio cable to the AUX IN JACK of the speaker and to the audio output socket on the external audio devices such as MP3 player, discman,etc,then select AUX by pressing the MODO button on the control panel . 2.Play from an external audio device. USB JACK Insert USB card directly for palying This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment

GUANGZHOU RUIMA ELECTRONICS CO.,LIMITED C5266091_X10_Ed.2 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2AWHG-RM-T1 To Whom It May Concern, Date: January 28, 2021 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality Short-Term Confidentiality NOTE 2 No No No No No No No NOTE 1 NOTE 1 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature:

Name: Wade Zeng Title: Manager 1/1

Model difference declaration letter Differences Description We GUANGZHOU RUIMA ELECTRONICS CO.,LIMITED state:

Product Portable Battery Speaker Model Name RM-T1,MemzuoixT-1,mayceyeeT-1,MemzuoixT-2

,mayceyeeT-2,RM-T2,BT-84,BT-87,BT-89,PBX-8 181,BT-85,PBX-BF25,PBX-8,PBX-5,PBX-1210,S B-2037,PBX-264,PBX-264SM,PBX-8008SM,PBX

-8080,PBX-1211,PBX-1226,PBX-116,PBX-311,P BX-312SM,PBX-89,PBX-BF8SM,PBX-800TWS,B T-86,PBX-115,BT-65,BT-66SM The above product with same circuit, PCB layout, electrical parts, materials and wiring structures, Appearance shape, the materials of decorative accessories is same, only different color, Signatory Date: 01-28-2021

<Signature>

NameWade Zeng TitleManager CompanyGUANGZHOU RUIMA ELECTRONICS CO.,LIMITED Address: 2/F 5 Building No.58 Yayuan South Road Xinya Street, Huadu District,Guangzhou,Guangdong,China

C5266091_X8_Ed.1 Letter of Authorization GUANGZHOU RUIMA ELECTRONICS CO.,LIMITED Company: GUANGZHOU RUIMA ELECTRONICS CO.,LIMITED Address:

2/F 5 Building No.58 Yayuan South Road Xinya Street, Huadu District,Guangzhou,Guangdong,China Product Name: Portable Battery Speaker Model Number: RM-T1 FCC Identifier: 2AWHG-RM-T1 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. is allowed to forward all Name: Wade Zeng Date: January 28, 2021 Title: Manager Signature of applicant:

1/1