|
app
s
|
Applicant Information
|
|
|
1 2 3 4
|
Effective |
2022-05-05
|
|
1 2 3 4
|
Applicant's complete, legal business name |
Guangzhou Shikun Electronics Co., Ltd
|
|
1 2 3 4
|
FCC Registration Number (FRN) |
0028116184
|
|
1 2 3 4
|
Physical Address |
NO.6 Liankun Road,Huangpu District
|
|
1 2 3 4
|
Guangzhou, N/A
|
|
1 2 3 4
|
China
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4
|
TCB Application Email Address |
h******@acbcert.com
|
|
1 2 3 4
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4
|
Grantee Code |
2AR82
|
|
1 2 3 4
|
Equipment Product Code |
SKIWB921A5
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4
|
Name |
B****** Y****
|
|
1 2 3 4
|
Title |
Certification Manager
|
|
1 2 3 4
|
Telephone Number |
13826********
|
|
1 2 3 4
|
Fax Number |
+86-2********
|
|
1 2 3 4
|
E-mail |
y******@cvte.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 | DTS - Digital Transmission System |
| 1 2 3 4 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 | 6XD - 15E 6 GHz Low Power Indoor Client |
| 1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | IEEE 802.11b/g/n/a/ac/ax 2T2R USB WiFi Module Integrated BT 2.1+EDR/4.2/5.2 |
| 1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
| 1 2 3 4 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 4 | Purpose / Application is for | Original Equipment |
| 1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 | Grant Comments | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This DUT can only be installed at 20 cm minimum separation distance from human.
This device also contains BLE, 2.4 GHz WLAN, 5 GHz and 6 GHz WLAN transmitters. |
| 1 2 3 4 | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This DUT can only be installed at 20 cm minimum separation distance from human.
This device has 20 MHz and 40 MHz bandwidth modes at 2.4 GHz WLAN and it contains Bluetooth, 5 GHz and 6 GHz WLAN transmitters. |
| 1 2 3 4 | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This DUT can only be installed at 20 cm minimum separation distance from human.
This device supports 20 MHz, 40 MHz and 80 MHz BW modes in 5G WLAN transmitter. It also contains Bluetooth, 2.4 GHz WLAN and 6 GHz WLAN transmitters. |
| 1 2 3 4 | Power Output listed is EIRP. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This DUT can only be installed at 20 cm minimum separation distance from human.
This device supports 20 MHz, 40 MHz and 80 MHz BW modes in 6 GHz WLAN transmitter. It also contains Bluetooth, 2.4 GHz WLAN and 5 GHz WLAN transmitters. |
| 1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4
|
Firm Name |
MRT Technology (Suzhou) Co., Ltd.
|
|
1 2 3 4
|
Name |
M**** C********
|
|
1 2 3 4
|
Telephone Number |
+86-5******** Extension:
|
|
1 2 3 4
|
E-mail |
m******@mrt-cert.com
|
|